If you want to sell your product you need to do a video of the actual job. You would sell much more with that approach. The threads of the plug as well as the bottom are still broke off in there . And I’m not sure if this would work.
2:24 the left handed threads aren’t “strange”, they’re left handed so they can loosen the “lefty loosely righty righty” RH threaded spark plug. Agree with other comments. Show it in use too please.
Рік тому+2
The whole threaded section is still in my cylinder head. What tool will Help with that ?
All y'all listen 1a auto they've gotten me thru many of complicated projects if they say something work's I'd almost 99% grant you it will work just use common sense they've not failed me yet
This video dummied this tool down for me I’ve watched other videos for the past week and the explanation that was given in this video was the best out of all I have a 04 f150 5.4 and idk what the last ppl did or used to tighten these spark plugs but pretty much all of them broke of in the cylinder thanks 1AAuto for this demo all I need is the actual tool now
is there such a toll for a Honda civic. i have the threaded metal portion suck in the cylinder. the ceramic and the rest of the spark plug has separated and come off
This tool is almost like magic. 6 of 8 broke off for me. The 2 in the back I thought were going to be a bitch. Well... this tool said to me "hold my beer."
But what do you do if the center electrode pin is still inside the bottom part of the spark plug stuck in the head? How do you remove it so you can use that tool?
all of that wont fit in a 99 gmc sierra 1500 , its the spark plug that sits at the upper top left. Theres 4 on the left/right . the first three are easy to get to but the last one that sits deep in the upper left.
His description seems broken. .. what will actually happen (I'm assuming, because I haven't used one) is that while you reverse thread this down the bottom "threads" cut into the spark plug metal and it starts to back the spark plug out of the engine. The nut tension is removed so you can continue to turn the tool to the left and it will eventually unscrew what remains of the spark plug. If the porcelain was smashed make sure to cycle your engine once everything is extracted, but before you put a new plug in. This will blow all the debris out.
@1aauto could you explain how to use this tool, if my broken spark plug threads are blocking the head threads, therefore not allowing the tools thread to grab…
Hi I have a 2008 Honda Civic GX natural gas car which the spark plugs are jammed in and the dealer doesn't want to touch it because they could break what do you recommend I should do I'm located in Orange County California and if you have any recommending repair shop which can help me Thanks Ravi
+Kong Lee We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Bought this and worked it for 5 broken. Bought a 2nd thread to think that the first might have been dull. Still at 5 broken plugs inside the truck. This tool is a joke.
No you'll need the cylinder head removal tool for that to get the porcelain that's packed inside the engine cylinder. That tool ranges in size from many sockets. Lol
THIS DOES NOT WORK ON PENTASTAR V6s!!! The spark plug tubes are too small and the tool can’t get to the bottom of the spark plug chamber! DO NOT BUY if you’re looking to use this on a pentastar engine
+Ronald Bravo Thanks for checking us out! There are other tools for other vehicles that can work across different years and engines, this one is just for the Triton specifically as it is different from all the rest. You can take a look and see the other options we have at 1aauto.com
+Kirby Derouen We wouldn't be able to help with an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
Completely and utterly confused as to how this thing works. How can you screw in the first piece,if there's a spark plug in there?! What would you be screwing it into?!
This guy's do not know how to explain the use of this thing, the way he make it seems it alike you assemble this after is already screwed in and his way of guidance or tutors is a mess ,hope the come see it an drake it out , I was ready to order one of this from them but cancelling my order
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
If you want to sell your product you need to do a video of the actual job. You would sell much more with that approach. The threads of the plug as well as the bottom are still broke off in there . And I’m not sure if this would work.
Fareal
2:24 the left handed threads aren’t “strange”, they’re left handed so they can loosen the “lefty loosely righty righty” RH threaded spark plug. Agree with other comments. Show it in use too please.
The whole threaded section is still in my cylinder head. What tool will
Help with that ?
All y'all listen 1a auto they've gotten me thru many of complicated projects if they say something work's I'd almost 99% grant you it will work just use common sense they've not failed me yet
Tip to first time users. Mark the thread where the punch and reverse thread should be when screwed in. Takes the guessing out of it.
This video dummied this tool down for me I’ve watched other videos for the past week and the explanation that was given in this video was the best out of all I have a 04 f150 5.4 and idk what the last ppl did or used to tighten these spark plugs but pretty much all of them broke of in the cylinder thanks 1AAuto for this demo all I need is the actual tool now
I've seen this tool work on other video's I promise you it's a must have it does n will work perfectly
My threads are stuck in the motor not the Porcelain
is there such a toll for a Honda civic. i have the threaded metal portion suck in the cylinder. the ceramic and the rest of the spark plug has separated and come off
what if the thread for the spark plug is still stuck in the engine? that wont screw down if the threads are still in there.
This tool is almost like magic. 6 of 8 broke off for me. The 2 in the back I thought were going to be a bitch. Well... this tool said to me "hold my beer."
But what do you do if the center electrode pin is still inside the bottom part of the spark plug stuck in the head? How do you remove it so you can use that tool?
all of that wont fit in a 99 gmc sierra 1500 , its the spark plug that sits at the upper top left. Theres 4 on the left/right . the first three are easy to get to but the last one that sits deep in the upper left.
Can you use this on anything other than a 5.4? For instance could I use it on an old dodge with the same problem?
The threaded part of the plug is still in the head. How do I get past this? I have he Lisle kit.
His description seems broken. .. what will actually happen (I'm assuming, because I haven't used one) is that while you reverse thread this down the bottom "threads" cut into the spark plug metal and it starts to back the spark plug out of the engine. The nut tension is removed so you can continue to turn the tool to the left and it will eventually unscrew what remains of the spark plug. If the porcelain was smashed make sure to cycle your engine once everything is extracted, but before you put a new plug in. This will blow all the debris out.
The porcelain came out in tack with the nut for the socket. Would this still work. It's in a 2004 Honda Accord 3.0L
@1aauto could you explain how to use this tool, if my broken spark plug threads are blocking the head threads, therefore not allowing the tools thread to grab…
Is A great Tool. Do you have a Tool to remove the Torsion bars on the chevy pickup 97 and similar Models
Does this tool work on the 1.5 as well or is it just for the 5.4?
is this a universal tool for ANY spark plug removal ?
Hi I have a 2008 Honda Civic GX natural gas car which the spark plugs are jammed in and the dealer doesn't want to touch it because they could break what do you recommend I should do I'm located in Orange County California and if you have any recommending repair shop which can help me
Thanks Ravi
Excellent advice
Does this work on other spark plugs or just the 5.4?
Any Ford vehicle 2006-2010
What happens when the extraction tool starts to strip
Will this work for twin cam motorcycle engines ?
Will this work on ANY vehicle?
Would this work for a 2017 Mazda CX-9?
my problemo is the rubber that is stuck in there not the spark plug... my spark plugs are still okay but I feel it is time to replace it
I can used this tool for others cars ?
Will this removal kit not work on the Ford 5.4 Triton 2V...? (2001Ford Expedition)
+Kong Lee We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
How about tool for a spark plug that is stripped
Try a dodge caravan back plugs bet that won’t fit lol
Bought this and worked it for 5 broken. Bought a 2nd thread to think that the first might have been dull. Still at 5 broken plugs inside the truck. This tool is a joke.
Show me on a ford truck.
What if alot of porcelain is packed inside the cylinder is this helpful cause the sparkplug is removed i just have alot of it packed inside
No you'll need the cylinder head removal tool for that to get the porcelain that's packed inside the engine cylinder. That tool ranges in size from many sockets. Lol
THIS DOES NOT WORK ON PENTASTAR V6s!!! The spark plug tubes are too small and the tool can’t get to the bottom of the spark plug chamber! DO NOT BUY if you’re looking to use this on a pentastar engine
Good video.
So you strip the treads
Only for Triton? There isnt a tool for all cars or all ford cars?
+Ronald Bravo Thanks for checking us out! There are other tools for other vehicles that can work across different years and engines, this one is just for the Triton specifically as it is different from all the rest. You can take a look and see the other options we have at 1aauto.com
What tools do I need for a 2013 Ford escape? The spark up shell stayed inside the cylinder.
What about for the 4.6 3v I broke one off
How about a link to the tool? Searched the site nothing comes up
Would this work on a pontic g6?
I know this comment is a year old but I got the same issue did you ever get that issue fixed?
That tool is alright tbh u break a spark plug in the head I think we are screwed regardless of the skills and tools 😂 the key is patience
Tool pull broken spark plug 4.6 ford f150
Extractor broke in spark plug what is the next option
+Kirby Derouen We wouldn't be able to help with an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
Completely and utterly confused as to how this thing works.
How can you screw in the first piece,if there's a spark plug in there?!
What would you be screwing it into?!
I’m betting that most plugs break with no way to get a the thread.
Tool costs $120.
I’ve know idea what you’re talking about…
This guy's do not know how to explain the use of this thing, the way he make it seems it alike you assemble this after is already screwed in and his way of guidance or tutors is a mess ,hope the come see it an drake it out , I was ready to order one of this from them but cancelling my order