HI everyone, thanks for taking the time to view my channel and video's. If you like the content please leave a like and if your a new viewer please consider subscribing to the channel and also leaving a thumbs up. If you wish you can now buy me a coffee if you like by heading over to my patreon, if not dont worry the video's will still be made. Thanks www.patreon.com/ChazzCoombes
today i instaled to somebody this sistem like you have, on same model car (but in Danmark - right side steer) and i followed your precise and correct instructions.....YOU ARE BEST OF THE BEST. FOLLOW, SUBSCRIBED and MASIVE SHARE .... you earned it
Hey bro, great work you did but i ha e a question. The 2 pin green and brown wires you connected the green wire to the 12v +ve wire of the brake, what did you do with the brown wire?
hi there, paolo from pisa, italy... Mondeo 2001 Sedan Mk3 TDDI I apologize in advance for my poor english... I got some questions: - you didn't use all the main kit wires, correct? - I saw you tested the kit detaching regular orange ignition plug; is ignition barrel/transponder key still usable? i.e. do they do work in parallel or factory keys are to be excluded? - I saw at 17:24 you showed up old transponder chip; I'm not sure I fully understand... should we still use this old chip or START kit is autonomous? - the START button has to be pressed three times? [1RADIO/2DASH LIGHTS/3CRANCKING]? - my car wasn't produced in England, but in Gent/Belgium factory; do we have consistency in wire coloring?i.e. do we have same wire colors? - and, final one, what about steering lock? if SL is mechanical, do we need to completely unmount old ignition barrel? I will try to flip movie for left/right drive... lol thanks a lot, paolo
Hi again Chazz when I fit this do I put the black chip to the big transponder they send in the box? Also will central locking still work Thanks amazing video
As you shlwed that system use a RFID Key Is possibile use the original RFID Key Iside your ignition Key since i woud like use the immobilizer already used by car (i have a Ford Fiesta european version)
Hi Chazz ! I am Emmanuel and i nedd your skills to do the exact same in my mk3 golf... I can now turn on the dashboard with the button but when i press the break pedal and push the button once it turns off the dashboard, and no cranking 😩 Actually it turns off and on half a second after... Could u help me ? Edit : solved
Hi good day can anyone have some advice installed push button start today but it started then unit just switched car off and now start light just flashes but it's not turning ignition on nothing and it's making a beeping sound
Hi can you help I have a mondeo mk3 tdci 2.2 I have brought this and tryed fitting it in using your video and it gets to the power on but it won't start the car could you help please
Hey brother, I've installed the system just as you did, but when I start the car it shuts off soon after. What did I do wrong? I've seen some people mention an ignition plug...
Hey i have the same system...but diagram show diferent from what you say...but still urs working mines not... I have an insignia and my problem is i cant find crank wire....whichi is intresting... Any idea?
I have a problem, connected all in my 2001 fiesta it works like a charm but it crancks it a bit too long, less then half a second too long and i can hear starter ringing
Hi Chazz, thanks for your video, it is helping me a lot, while I am waiting to receive my unit. I have a question about the old key and the immobilizer. As I understand, I can even remove the ignition and locking barrel, but where do you put then the immobilizer, so the car can read it? Thanks in advance!
Hi and thanks for watching, as i have removed the barrel the steering lock is no longer active. I am trying to work out how to add it to this kit. If you havent done so consider subscribing and liking the video as this helps the channel grow
@@ChazzCoombes steering lock/unlock provides an extra layer of security. whats your opinion mate on the safety of the car without steering lock? I'll let you know if i find anything related to steering lock which could be added to your kit. Thanks
hello again I have one more question for you, or if in your Mondeo mk4 change from the ignition switch to the engine start button according to the instructions, this replacement is legal in the UK or I can normally do MOT, can I put the button in the place where there is an ignition switch or must be in a separate place?
I'v seen on your other video that the push/start button is where the key use to go can I assume you removed the barrel and steering lock guts out before fitting? if you have a video showing the lock removal have you a link, Thanks Chazz..
I skipped to the end and I apologize if this was addressed in the video but what did you do about the key needing to be in the ignition for the steering unlock?
@@ChazzCoombes I was having ignition and steering lock problems and it was all a matter of a bad battery I just went and bought a new gel battery from interstate and ouila it's fine now, thanks for your quick response
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running?? Will it still provide current to the STARTER MOTOR??
Hi Chazz, loving the videos you've put up, I tried to follow the link for the button pack but it "couldn't find page" where else can I get it from? Keep doing what you're doing man.
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running?? Will it still provide current to the STARTER MOTOR??
I want to install such a button in my car only if I will not have a problem with the immobilizer in the original keys if I completely remove the ignition and the key only wants to open the door
What was you doing at the end with RFID chip from the key ?and is the brown for cars running on a different electric current? Meaning you would use brown as live for AC instead of red
@@ChazzCoombes no worries just checking,gonna have a go on my old Mazda Tribute which has mostly if not all ford electrics will double check my wire colours ect ,if in doubt leave alone is my approach forgot to ask and might seem silly is it best to disconnect the battery when installing???
Your guide is the best guide I found. I run into one problem. When I want to shutdown the car the button dosen't do anything, no matter if I push the brake pedal or not. What do you think, what could be the problem?
FrodoTEST hi, thanks for your comment. The problem.maybe with your wire that runs to the brake light wire. I have to push and hold.for 2/3 seconds. Please share this video with your fellow car friends and subscribe. If there is anything else please feel free to.message me.
Hi Chaz, I notice you fitted the button to a ford, was it the focus mk1? I have the mk2 automatic 2ltr 2006 would anything be different to the way you set yours up? cheers pal. Doug.
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running?? Will it still provide current to the STARTER MOTOR??
@@ChazzCoombes I saw on both harneses you didnt use on green wire the brown wire or the main harness so are those two for exta power or accessories? just curios
Hey Chazz, brilliant video!! The ebay link doesn't work, can you fix this asap as I've got a van & car i want to fit this to following your great video! Cheers pal
@@ChazzCoombes what if the button was pressed and brake pressed as well while engine is still running?? Will it still provide current to the STARTER MOTOR??
hello great tutorial, I have a question about if I want to remove the completely manual key and the engine will be run only from the button is it possible? what about the original immobiliser which is in the original key?
did u hook the yellow starting wire to the ignition wire and what about the brown and white wire. connected with the blue brake wire what do u hook it to
Nope this system has an immobilser and the chip is on your keys so even if someone did brake in then without the chip couldnt start the car. Ive tried lol
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running?? Will it still provide current to the STARTER MOTOR??
HI everyone, thanks for taking the time to view my channel and video's. If you like the content please leave a like and if your a new viewer please consider subscribing to the channel and also leaving a thumbs up. If you wish you can now buy me a coffee if you like by heading over to my patreon, if not dont worry the video's will still be made. Thanks
www.patreon.com/ChazzCoombes
do u live in florida ?
Hallo,
For Chrysler 300C 2008y
Is ok? Thx
Sup
Great video! I’d like to upgrade my F-150 with some of the installs you do but I’m afraid I’ll mess something up.
today i instaled to somebody this sistem like you have, on same model car (but in Danmark - right side steer) and i followed your precise and correct instructions.....YOU ARE BEST OF THE BEST.
FOLLOW, SUBSCRIBED and MASIVE SHARE .... you earned it
Hello. DJ OVIDIUS. Can you help someone from Norway? Can't get the car started with the 3 push and where do you put the chip on the key?
I have 2018. Honda civic I can't get the wire diagram for my car, my question is should I follow the same color coordinate
Chazz, I have similar start button but no instructions on wiring to a existing push key system on my VW Passat B6, do you have any help please.
Hi, i want to install this to my 2013 dodge avenger, will the remote still work to lock and unlock the car?
Hey bro, great work you did but i ha e a question.
The 2 pin green and brown wires you connected the green wire to the 12v +ve wire of the brake, what did you do with the brown wire?
didnt connect it to anything. tape it up safely
Yes , where is the imobolizer , or you do not need in this case?? The key did not have a chip??
I have a question if you removed the ignition switch or do you have a second key under the button, and where did you put the chip immobilizer
Thats my question also
That its my question also???😢😢😢
Excellent video sir
the brown wire is it no connection in the manual its for the key2 mine also has no key2 (ig2) so you just float it ? tnx
I want to install this in Passat B5 1.6 from 1999. But i don't know how to connect it.
Are the rfid chips 125 kHz? I ordered some replacement keys because I lost em but the 125 kHz chips don’t seem to be working
hi there, paolo from pisa, italy...
Mondeo 2001 Sedan Mk3 TDDI
I apologize in advance for my poor english...
I got some questions:
- you didn't use all the main kit wires, correct?
- I saw you tested the kit detaching regular orange ignition plug; is ignition barrel/transponder key still usable? i.e. do they do work in parallel or factory keys are to be excluded?
- I saw at 17:24 you showed up old transponder chip; I'm not sure I fully understand... should we still use this old chip or START kit is autonomous?
- the START button has to be pressed three times? [1RADIO/2DASH LIGHTS/3CRANCKING]?
- my car wasn't produced in England, but in Gent/Belgium factory; do we have consistency in wire coloring?i.e. do we have same wire colors?
- and, final one, what about steering lock? if SL is mechanical, do we need to completely unmount old ignition barrel?
I will try to flip movie for left/right drive... lol
thanks a lot,
paolo
How do u find the right wires like 12 volts acc and so on
Does this control, unlock / lock the central locking system?
This kit dont but the other kit i installed has keyless entry.
Why are my colors not at all the same as the ones that come with the kit? Are they supposed to match? I have a Dodge Magnum SXT 05.
What is the difference in function between white and brown wire?
Hi again Chazz when I fit this do I put the black chip to the big transponder they send in the box? Also will central locking still work
Thanks amazing video
Good video.. would it work for a 99 mercedes benz c280?
Can I install this in my 2010 Mercury Milan premier?
I got a BMW e36 do you have any help on that please 😢
Does it come with keyless entry kit?
As you shlwed that system use a RFID Key
Is possibile use the original RFID Key Iside your ignition Key since i woud like use the immobilizer already used by car (i have a Ford Fiesta european version)
Did you bypass the steering lock?
Hi Chazz ! I am Emmanuel and i nedd your skills to do the exact same in my mk3 golf... I can now turn on the dashboard with the button but when i press the break pedal and push the button once it turns off the dashboard, and no cranking 😩 Actually it turns off and on half a second after... Could u help me ? Edit : solved
So you didn’t connect the brown wire from the 6 wire ignition harness? Which is form ON2 shut off and on with ignition?
Hi good day can anyone have some advice installed push button start today but it started then unit just switched car off and now start light just flashes but it's not turning ignition on nothing and it's making a beeping sound
Does it works on Ford Explorer 2002?
Hi on which car is this installed
Is the yellow the only one you terminate
Hey chazz thank bro. İts a how car model?
Hi can you help I have a mondeo mk3 tdci 2.2 I have brought this and tryed fitting it in using your video and it gets to the power on but it won't start the car could you help please
I’m the same. Please help
Hi friend may i ask how can i install this in my Hyundai?? I should press the clutch when i crank the engine how can this work for me?
Hey there. So what do I do about the steering wheel lock, do I have to break a key in the ignition and leave it in the ACC position?
🤣🤣🤣🤣 this is cazy as fuck
Hey brother, I've installed the system just as you did, but when I start the car it shuts off soon after. What did I do wrong? I've seen some people mention an ignition plug...
Hey i have the same system...but diagram show diferent from what you say...but still urs working mines not...
I have an insignia and my problem is i cant find crank wire....whichi is intresting...
Any idea?
I have the same problem. Did you manage to connect?😅
When using this push button start does it automatically unlock the doors when you walk up to the vehicle?
At the moment no
Hey bud would this work on a mk3 mondeo?
Hiya Mike mate, yeah i installed it on mine with no issues.
@@ChazzCoombes sweet cheers chazz sounds like that's my next project .
can this be done on a fiesta 1.6 ti-vct?
I have a problem, connected all in my 2001 fiesta it works like a charm but it crancks it a bit too long, less then half a second too long and i can hear starter ringing
How reliable is it? I've been looking into it and everyone is telling me not to do it, apparently it's very unreliable
Hiya thanks for watching. Ive had this set up a year or so now. Ive had no issues yet works well.
@@ChazzCoombes thank you for replying! Do you have to use your key to unlock the ignition first?
Great video btw keep it up
After you install the green wire to break What did you do with the brown wire. Where did you install?
hi the brown wire does not get used, thanks for watching, be sure to leave a like and consider subbing as this will help the channel grow, thanks
@@ChazzCoombes thank you
what was that little on the hand? Have you shown where he is from?
Hi Chazz, thanks for your video, it is helping me a lot, while I am waiting to receive my unit. I have a question about the old key and the immobilizer. As I understand, I can even remove the ignition and locking barrel, but where do you put then the immobilizer, so the car can read it? Thanks in advance!
Hello!
Thank you for the video.
I lost my keys to my mondeo and wonder if this kits will be working on my car?
Nice tutorial
Hi mate.
Could u show me what wires under the dashboard that is for the central lock ????
Hi i will do a short video on this shortly.
@@ChazzCoombes great Because I have everything pulled of right now and only missing to locate the central lock.
Do u have Skype?
Or if u have a picture where there are located ??
good job mate. i've a question for you. does doing this system obsoletes the steering lock/unlock system? thanks in advance
Hi and thanks for watching, as i have removed the barrel the steering lock is no longer active. I am trying to work out how to add it to this kit. If you havent done so consider subscribing and liking the video as this helps the channel grow
@@ChazzCoombes steering lock/unlock provides an extra layer of security. whats your opinion mate on the safety of the car without steering lock? I'll let you know if i find anything related to steering lock which could be added to your kit. Thanks
hello again I have one more question for you, or if in your Mondeo mk4 change from the ignition switch to the engine start button according to the instructions, this replacement is legal in the UK or I can normally do MOT, can I put the button in the place where there is an ignition switch or must be in a separate place?
I'v seen on your other video that the push/start button is where the key use to go can I assume you removed the barrel and steering lock guts out before fitting? if you have a video showing the lock removal have you a link, Thanks Chazz..
hiya there is a video somewhere, lol. I will find it and post it here for you
@TelKirton ua-cam.com/video/3xY39gefbqM/v-deo.html
I skipped to the end and I apologize if this was addressed in the video but what did you do about the key needing to be in the ignition for the steering unlock?
Lord Havok ua-cam.com/video/FiUMpWzaPjM/v-deo.html heres the video how to remove it
Can I do this to my 2000 Mercedes E320?
I cant see why not to be honest, would be a matter of working out what wires are which
@@ChazzCoombes I was having ignition and steering lock problems and it was all a matter of a bad battery I just went and bought a new gel battery from interstate and ouila it's fine now, thanks for your quick response
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running??
Will it still provide current to the STARTER MOTOR??
When you take the ignition barrel out what do you do about the immobilizer so the car can start
Hiya Sam, ive covered that in another video
@@ChazzCoombes which video did you cover it in
@@sampratt7533 ua-cam.com/video/ffxPjITmcdM/v-deo.html
@@ChazzCoombes thanks
@@sampratt7533 your welcome be sure to leave a like and share with ya mates 😉
Is that a diesel sounds louddd
Nope 3L v6 petrol stainless steel exhaust system.
Hi Chazz, loving the videos you've put up, I tried to follow the link for the button pack but it "couldn't find page" where else can I get it from?
Keep doing what you're doing man.
Hi i will try and fix the link for you when i get in from the garage. And thanks
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running??
Will it still provide current to the STARTER MOTOR??
I want to install such a button in my car only if I will not have a problem with the immobilizer in the original keys if I completely remove the ignition and the key only wants to open the door
What was you doing at the end with RFID chip from the key ?and is the brown for cars running on a different electric current? Meaning you would use brown as live for AC instead of red
Hiya David, i was placing it near the RFID reader that is stock on the car. The brown wire is not needed cheers
@@ChazzCoombes no worries just checking,gonna have a go on my old Mazda Tribute which has mostly if not all ford electrics will double check my wire colours ect ,if in doubt leave alone is my approach forgot to ask and might seem silly is it best to disconnect the battery when installing???
Wow nice help me for my mondeo
Lena Heesch thanks for watching
hello i need to have a tutorial in german my english is not that good using an english-german translator
Lena Heesch i will add sub titles if that will help
Yes that would help me a lot with subtitles thank you very much 😊
Do you have to hold the button to when you go to start it? Or can you just press it?
Kristian Martin just push the brake pedal and pushbthe button.
Your guide is the best guide I found. I run into one problem. When I want to shutdown the car the button dosen't do anything, no matter if I push the brake pedal or not. What do you think, what could be the problem?
FrodoTEST hi, thanks for your comment. The problem.maybe with your wire that runs to the brake light wire. I have to push and hold.for 2/3 seconds. Please share this video with your fellow car friends and subscribe. If there is anything else please feel free to.message me.
Hi Chaz, I notice you fitted the button to a ford, was it the focus mk1? I have the mk2 automatic 2ltr 2006 would anything be different to the way you set yours up? cheers pal. Doug.
Doug Ward hi doug, i fitted this to my mk3 mondeo. Ive not yet fitted one to an automatic but id imagine the process would be the same
FrodoTEST
When it's cold the chip won't read. what do i do?
Rebecca gaunt hi, ive not had this problem yet. Fingers crossed i never do. Have you got another fob too use?
Sir, it is work without computerbox?
how do you mean computer box? thanks
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running??
Will it still provide current to the STARTER MOTOR??
Great video big 👍 and I subscribed 😁
Alfredo Luciano cheers and tja ks for taking the time to watch my vid and for subbing. 😊
Can you write me is that mod can be installed in vauxhall insignia 2011 ?
Hi yes, i am sure this kit would work with your car. your just need to work out what wires are what by testing with a multimeter, thanks
@@ChazzCoombes cheers mate :)
Did you ever use a relay?
Where did you put the brown wire to?
The brown wire on the main wire harness
@@nikog4071 hiya mate i didnt need to connext the brown wire on this car.
@@ChazzCoombes I saw on both harneses you didnt use on green wire the brown wire or the main harness so are those two for exta power or accessories? just curios
Awesome.....after install, can you leave the transponder in the vehicle and wire it to an aftermarket alarm?
Hallo,
For Chrysler 300C is ok ?
Thank you
Does the key work after installation of push button or else only the push button works
Rohit. Bobby. Hi installing this kit removes the need off the key. No problems, works fine.
Can we make both of them work. I mean if we reattached iginition to the key both of them work right
Chazz Coombes plzz tell me if both works i will go with it
Rohit. Bobby. Yes you can have both working if you wanted
Chazz Coombes what to do if i want both of them working
thanks sir
I would like to install seat height adjuster in my Nexon XM is it possible & where I can get it
How I can contact you sir please have problem the Puch to start the car you
How about the original key switch
Hey Chazz, brilliant video!!
The ebay link doesn't work, can you fix this asap as I've got a van & car i want to fit this to following your great video!
Cheers pal
Hiya mate, cheers. Will sort this when home.
all fixed
@@ChazzCoombes what if the button was pressed and brake pressed as well while engine is still running??
Will it still provide current to the STARTER MOTOR??
Amazing video. How much would you charge to do this job
Will try it on my citroen c4. Will let you know if it works.
Thanks for sharing
did it work
@@Ali-rk4uz sorry mate. Just saw your question.
Sold it before trying
nice video
brown wire goes where because u didn't show it in the video????
The Savage Garage
thank you
hi and thanks was please to help james out
Nice
I sub to your channel
Thanks for the support Michael
Good vid and makes it easy,but think wire cutters are pliers
hello great tutorial, I have a question about if I want to remove the completely manual key and the engine will be run only from the button is it possible? what about the original immobiliser which is in the original key?
I will add only with my mondeo mk4 2007
Sebastian Dobosz hiya i have no key what so ever only to get intonthe car itself.
but to the central lock you probably need a key to open the door
did u hook the yellow starting wire to the ignition wire and what about the brown and white wire. connected with the blue brake wire what do u hook it to
Hi thanks for watching the video, the yellow wire is cranking/ignition wire, the blue is ac1 (turns on radio)
frankmcdonald30 white goes to ac2 which is the instrument cluster fuel pump stuff like the the brown wire is not needed
i have a dodge charger 06 how would i hook it to this vehicle
so i hook yellow wire to ignition wire not stater wire on ignition switch plug
frankmcdonald30 thats correct, have you subscribe yet?
2 likes away now mate 😉👍
Cheers mate, i was thinking of redoing this one, making a shorter intro ect, just like a revisit to the project
nice
You able to help me out quick
Alto k10 me install Ho sakta ho Kya model 2019
Got a pair of wire cutters pulls out pliers 😂
Like it chazz
Is the key on
How about on a 2009 Jaguar xf??
It is good
You forgot to connect the brown wire to the oil pump after you installed green wire to foot pedal 👍
two brown wires instead
It can fit in maruti suzuki celerio
How to install a turbo timer
Ok A+
So basically if someone brakes into my car and pushes the button he could get a good car for free!
Nope this system has an immobilser and the chip is on your keys so even if someone did brake in then without the chip couldnt start the car. Ive tried lol
Chazz Coombes what if i lose the chip 😂
So i have an vw mk4 would i he able to do this? And im guessing i would still need the key close to the ignitin to start the car right???
@@ChazzCoombes Chazz Coombes what if the button was pressed and brake pressed as well while engine is still running??
Will it still provide current to the STARTER MOTOR??
more details about that brutal sound? umm.. please?
Plzz do a video on keyless entry for this car
Im working on something for that
Chazz Coombes thank u and hope it will come soon
Chazz Coombes Eunavi 12V New Universal Car Auto Remote Central Kit Door Lock Locking Vehicle Keyless Entry System
Eunavi Universal Car Remote Central Kit Door Lock Vehicle Keyless Entry System