I once lost the screws from the tripodmount on the bottom of my xt2… they looked quite the same! Fuji however was so kind and sent some replacement screws! I love their service…
Hi! Thank you for the video. I’m thinking of getting this for an event where there is a speaker on the podium and I Plan to use a camera using the Hollyland c1 to transmit on to the screens in the room. I’m worried that there might be too much latency between the video and the audio in the room where is noticeable. What are your thoughts?
That usb c cable is from a hard drive. I have a few myself. That’s why they have a slight bend, it shapes into the size that fit in the usb c and usb c to usb A cable that come with hard drives like LaCie portable drives.
I reccomend everyone buy a cheap bulk set of cable heat shrink and color code their cables. Doesn't take much just q small rubber band size chunk on each end. Makes life a ton easier at a glance. Reg USB, HDMI, mini HDMI etc all easy to recognize when staring down into our cable storage.
I had the same thing happen to me, the cable i found was the one included with my XT4. Even though usbc have its advantages, there is no way no know which cable is which.
Hi, Thanks for videp If the signal enters in hdmi on the transmitter, can it be recovered in sdi on the receiver, and vice versa? On the receiver, the hdmi and sdi outputs can be used at the same time? When the Cosmo C1 is used in direct usb on the pc without a capture card, can the hdmi and sdi outputs be used at the same time as the usb capture to send signals to other peripherals? Thanks
Not related to the video but I have a question and I think you are the only one I know that can probably answer. I recently switched back to Mac when I connect my Fuji XT-3 I can only access the camera via an app like LR, Capture one or Capture Image app. Is there anyway to see the camera in Finder so I can just drag the images to a folder?
I don't think so. I've tried that. I've used Macs since 1978 and they have yet to have a decent drag and drop functionality. iTunes file management and Photos all use an 'import process' and such as simple and helpful thing as drag/drop files is oddly missing so much of the time. You'll need to use the SD card unfortunately to tie to Finder.
I have just bought a xt4. Do i need to update only the latest firmware update or do I have to update each and every firmware update in the sequence of as and when they were released. Kindly help.
You can just jump to the latest firmware. If you connected the app during the initial setup as it suggested, it would have popped up there to tell you that there was a new firmware and asking if you would let it install it right then and there.
You should give a Look at roland AeroCaster which will release. I don't know yet, as I couldn't test it. But it's basicly transmitting video through Wifi. Clearly less powerfull than the Cosmo. But you could do a live mix using HDMI to USB capture card out of the camera to the phone and feed the AeroCaster. In fact, you can already do it over 4G with rtmp transmittion and receiving it onto the server you want. Let's try cheaper solution may be xD
I once lost the screws from the tripodmount on the bottom of my xt2… they looked quite the same!
Fuji however was so kind and sent some replacement screws! I love their service…
Do a detailed video on OBS please. Thank you
very useful, thank you. I'm trying to upgrade it but same problem ! Do you know how ?
Cant wait to ses the 13mm lens review
This helped me... bloody cables! Thank you.
Hi! Thank you for the video. I’m thinking of getting this for an event where there is a speaker on the podium and I Plan to use a camera using the Hollyland c1 to transmit on to the screens in the room. I’m worried that there might be too much latency between the video and the audio in the room where is noticeable. What are your thoughts?
Hi sir , How Many Delayed In Cosmo C1 wirelless , Reply Me sir Thanks
That usb c cable is from a hard drive. I have a few myself. That’s why they have a slight bend, it shapes into the size that fit in the usb c and usb c to usb A cable that come with hard drives like LaCie portable drives.
I may make a video about this, I don’t know. (Side smile). Loved it 😍🌹
I reccomend everyone buy a cheap bulk set of cable heat shrink and color code their cables. Doesn't take much just q small rubber band size chunk on each end. Makes life a ton easier at a glance.
Reg USB, HDMI, mini HDMI etc all easy to recognize when staring down into our cable storage.
I had the same thing happen to me, the cable i found was the one included with my XT4. Even though usbc have its advantages, there is no way no know which cable is which.
Yep my xt4 cable is my go to data cable when needed.
Do I have to have the M1 because I have a MacBook Pro 💻 2016 I have all the cables still not connected.
Hi,
Thanks for videp
If the signal enters in hdmi on the transmitter, can it be recovered in sdi on the receiver, and vice versa?
On the receiver, the hdmi and sdi outputs can be used at the same time?
When the Cosmo C1 is used in direct usb on the pc without a capture card, can the hdmi and sdi outputs be used at the same time as the usb capture to send signals to other peripherals?
Thanks
Not related to the video but I have a question and I think you are the only one I know that can probably answer. I recently switched back to Mac when I connect my Fuji XT-3 I can only access the camera via an app like LR, Capture one or Capture Image app. Is there anyway to see the camera in Finder so I can just drag the images to a folder?
I don't think so. I've tried that. I've used Macs since 1978 and they have yet to have a decent drag and drop functionality. iTunes file management and Photos all use an 'import process' and such as simple and helpful thing as drag/drop files is oddly missing so much of the time. You'll need to use the SD card unfortunately to tie to Finder.
@@pal2tech Thank you for answering! I really enjoy your channel!
Hey, I caught a quick glimpse of the Zoom F6 but it isn't listed on your "gear used" list.
it's shy.
@@pal2tech hehe
Nice trees and snow free ground you have. Temp in the low 30's...meh. It's warmed up to 14˚ up here with more snow again tonight.:)
That's so cold, my thoughts themself have just frozen.
Haha, I love that intro. And you have a typo in the video thumbnail :)
Maybe you can explain me why the 4 k videos of my xt3 don’t upload on the new apple tablet, I mean what do I wrong?
Thanks for sharing.
This usb-c cable is fron fuji charger ;)
What happened your faulty 16-55 2.8 lens?
they fixed for about $300. Still never found what exactly was wrong with it.
I have just bought a xt4. Do i need to update only the latest firmware update or do I have to update each and every firmware update in the sequence of as and when they were released. Kindly help.
only the latest firmware.
You can just jump to the latest firmware. If you connected the app during the initial setup as it suggested, it would have popped up there to tell you that there was a new firmware and asking if you would let it install it right then and there.
@@pal2tech Thank you very much
@@dtucny Thank you very much
Chris!!! You have a few loose screws!!! LOL!!!
The egg was a nice touch…😀
I have 11 more for future videos! 👍
I might have to try this egg thing at home while cooking. I am clearly focusing on the wrong part of the video…
Those are laptop screws. Check the underside of the cases.
They might have fallen from the Dell laptop. It happened to me a few times
You should give a Look at roland AeroCaster which will release.
I don't know yet, as I couldn't test it. But it's basicly transmitting video through Wifi. Clearly less powerfull than the Cosmo. But you could do a live mix using HDMI to USB capture card out of the camera to the phone and feed the AeroCaster. In fact, you can already do it over 4G with rtmp transmittion and receiving it onto the server you want.
Let's try cheaper solution may be xD
2:07 😏 📷
Screws: camera eggs
That looks like a Samsung T5 cable.
Yup, it's from the SSD drive
Man so many commercials, make that money