Great video, thanks… Funny how, when ever the neighbours make noise… we always look at the wall or the ceiling as if we have X-ray vision or telepathy… I did want the cosmo, but i opted for the Vaxis atom 500 SDI, because in addition to all these features it also cross converts SDI-HDMI. Albeit with a short range but better or similar latency. Stability would be better on the C1. But in real world use small glitches happen on every piece of kit…
Hey Tyler, thanks for another great video! Question regarding cross convert…. Have you tried using hdmi in to the transmitter and sending the signal to the receiver and then SDI out? Perhaps there is no cross concert for loop out on the transmitter but I am hoping it will convert through its wireless signal…. Would love to know! 🙏🏻🙏🏻
When you use HDMI input to the transmitter, it can't loop out in the transmitter, but it can still output HDMI and SDI from the receiver. Hope it helps.
Hi, I did not understand about the power supply. Is it possible to connect both the receiver and the transmitter to the power for long shootings for all the day continuously? Or how to solve? Thank you
I have the 400s Pro and I'm sending them back in for repair for the 2nd time. The 400s Pro model has some serious design flaws. I'm hoping I can sell them when I get them back from repair and upgrade to these. But if this has issues too, then this will be my last Hollyland purchase. The lower latency will be a huge bonus for pulling focus. Though the latency is more determined by the camera's output. Could that be why you didn't notice a difference?
I was really looking forward to upgrading from my Mars 400s (1st gen non-pro version), but whatever Hollyland rolled out after is barely a step-forward. It is also such a huge disappointment that they discontinued the actual Cosmo line with zero delay and uncompressed signal.
Hey bro have you tried these with the hollyland app for latency? From my experience with the 4Hunnit S Pros, they do better with the app instead of direct connect to a monitor.
Thank you for this! I was considering upgrading from my Mars 400s Pro to the Cosmo C1 because of the latency - good thing I watched this and didn't just believe the numbers on their website. Is there any wireless video system in this price category with a significantly better latency? I'm looking for something that's good for focus pulling.
@@TylerEdwards I've just learned about the Swit Flow500 which is supposed to be near zero latency. Sure it's a little bit pricier than the Hollyland but still much more affordable than a Teradek.
Thanks roe the video! If I buy it I’d like to plug it in my streaming 4 camera system based on atem mini pro iso, but only in one gymbal operated camera. Do you know of there is a cheap wav for that giving that same delay for the rest of the wired cameras? Thanks in advance!
Hi, Thanks for video If the signal enters in hdmi on the transmitter, can it be recovered in sdi on the receiver, and vice versa? On the receiver, the hdmi and sdi outputs can be used at the same time? When the Cosmo C1 is used in direct usb on the pc without a capture card, can the hdmi and sdi outputs be used at the same time as the usb capture to send signals to other peripherals? Thanks
exactly ! such a shame, but the usbc to use it as a webcam is pretty awesome, which is a great selling point IMO. In the end, the acssoon cineeye 2s pro seems great and also cheaper
Thx for vid. Was gonna upgrade from mars 4k just for loop out. However via hdmi. But sounds like I cannot have a hdmi feed to transmitter then run a mirror w lop out?
Ok, let me get this right, you said it does not cross convert? but it does converts from SDI to HDMI, i use RED Komodo Just like you, I connect with SDI on the Transmitter and use the HDMI out on the Receiver, so it does "CROSS" Convert, i Used it for Live Stream both New Years eve and Last Sunday, i haven’t done any firmware update of any type, It may not be Bi-directional converting, so i think you are not going Hollyland Cosmos C1 a fair Review.
He was specifically talking about cross converting with respect to the "loop out" on the transmitter. So, you can't use HDMI in and SDI Loop Out simultaneously on the **transmitter** side. ua-cam.com/video/FdgMPgSYtRI/v-deo.html
Could you show a wireless system that wont break the bank that is good for pulling focus?
Proprietary antenna connections? It would be nice to have low profile antennas for short dustances, like in studio or interviews
Did you do a range comparison with the 400s? Range seems to be the main difference between the two.
Great video, thanks…
Funny how, when ever the neighbours make noise… we always look at the wall or the ceiling as if we have X-ray vision or telepathy…
I did want the cosmo, but i opted for the Vaxis atom 500 SDI, because in addition to all these features it also cross converts SDI-HDMI. Albeit with a short range but better or similar latency. Stability would be better on the C1. But in real world use small glitches happen on every piece of kit…
Hey Tyler, thanks for another great video! Question regarding cross convert…. Have you tried using hdmi in to the transmitter and sending the signal to the receiver and then SDI out?
Perhaps there is no cross concert for loop out on the transmitter but I am hoping it will convert through its wireless signal…. Would love to know! 🙏🏻🙏🏻
When you use HDMI input to the transmitter, it can't loop out in the transmitter, but it can still output HDMI and SDI from the receiver. Hope it helps.
Will the wireless punch through walls and floors?
Hi, I did not understand about the power supply. Is it possible to connect both the receiver and the transmitter to the power for long shootings for all the day continuously? Or how to solve? Thank you
the question is the runtime.. do they overheat say, after 4 or 5 or 6 hours continuously in use?
I have the 400s Pro and I'm sending them back in for repair for the 2nd time. The 400s Pro model has some serious design flaws. I'm hoping I can sell them when I get them back from repair and upgrade to these. But if this has issues too, then this will be my last Hollyland purchase. The lower latency will be a huge bonus for pulling focus. Though the latency is more determined by the camera's output. Could that be why you didn't notice a difference?
They just relased the 400s pro mark II
I was really looking forward to upgrading from my Mars 400s (1st gen non-pro version), but whatever Hollyland rolled out after is barely a step-forward. It is also such a huge disappointment that they discontinued the actual Cosmo line with zero delay and uncompressed signal.
Hey bro have you tried these with the hollyland app for latency? From my experience with the 4Hunnit S Pros, they do better with the app instead of direct connect to a monitor.
Thank you for this! I was considering upgrading from my Mars 400s Pro to the Cosmo C1 because of the latency - good thing I watched this and didn't just believe the numbers on their website. Is there any wireless video system in this price category with a significantly better latency? I'm looking for something that's good for focus pulling.
Unfortunately there’s nothing in this price range that is near zero latency like a teradek.
@@TylerEdwards I've just learned about the Swit Flow500 which is supposed to be near zero latency. Sure it's a little bit pricier than the Hollyland but still much more affordable than a Teradek.
Thanks roe the video!
If I buy it I’d like to plug it in my streaming 4 camera system based on atem mini pro iso, but only in one gymbal operated camera.
Do you know of there is a cheap wav for that giving that same delay for the rest of the wired cameras?
Thanks in advance!
ah man i miss the old studio setup
Haha but I certainly don’t miss setting it up and tearing it down every time I make a video
Hola amigo. Estoy intentando conectar una lumix gh4 al cosmo c1 y no tengo manera de que me lo detecte. Sabrías decirme qué está fallando?? Gracias
can i use it on apps?
I purchased this and I was disappointed. Only because it only does 1080p. Looking for something that will do other formats to include 4k
Cirrus is the processor on it
Hi,
Thanks for video
If the signal enters in hdmi on the transmitter, can it be recovered in sdi on the receiver, and vice versa?
On the receiver, the hdmi and sdi outputs can be used at the same time?
When the Cosmo C1 is used in direct usb on the pc without a capture card, can the hdmi and sdi outputs be used at the same time as the usb capture to send signals to other peripherals?
Thanks
The no cross convert is an instant no go.. What a shame, maybe there next one
exactly ! such a shame, but the usbc to use it as a webcam is pretty awesome, which is a great selling point IMO. In the end, the acssoon cineeye 2s pro seems great and also cheaper
@@bbrunorocha lol literally wanna buy the accsoon better latency as well
@@SustainableGal that's what i saw as well ! better latency and my friend said the app is great !
@@SustainableGal and also support multiple RX
Between this and the Mars 4k what would you recommend? Pay lesser to get more res?
Thx for vid. Was gonna upgrade from mars 4k just for loop out. However via hdmi. But sounds like I cannot have a hdmi feed to transmitter then run a mirror w lop out?
So is the c1 a 300 pro Sdi version upgrade then due to loop out, and Closer to Vaxis Atom 500SDI which does cross convert???
03:20 Yo, don't snitch out on Santa doing his work.
😂
Ok, let me get this right, you said it does not cross convert? but it does converts from SDI to HDMI, i use RED Komodo Just like you, I connect with SDI on the Transmitter and use the HDMI out on the Receiver, so it does "CROSS" Convert, i Used it for Live Stream both New Years eve and Last Sunday, i haven’t done any firmware update of any type, It may not be Bi-directional converting, so i think you are not going Hollyland Cosmos C1 a fair Review.
He was specifically talking about cross converting with respect to the "loop out" on the transmitter. So, you can't use HDMI in and SDI Loop Out simultaneously on the **transmitter** side.
ua-cam.com/video/FdgMPgSYtRI/v-deo.html
Aw my god the latency is a huge bummer!
lol...how dare they advertised 40ms!!!
@@annunciatagionata9914 did they really, looks as bad as 85ms from Tyler's testing lol
@@SustainableGal oops...cosmo c1 is not up to par
baybe the latency is caused by monitor and camera combination
@@brmoogma yeah but subtract that and the latency of the Cosmo is still way to much for pulling focus
No cross conversion is a dealbreaker. Bummer.
What does that mean?
@@ac-hq9zb It won’t take an HDMI input for example and output an SDI one. Or vice versa.
@@estebanvalencia4436 oooo
@@estebanvalencia4436 thanks 😊
@@estebanvalencia4436 is this to have no latency, also do you know if this transmits audio?