Just happy to see he is posting weekly instead of once every 4-6 months. Yes I know it might slow down once school starts back up, but hey, well take it while we can get it.
Nope, little fellar got ahead of himself. He said he had a new seat coming, should have never wasted the first sticker on the old seat....gonna need the other to put on new seat.
Hey Bentley? The reason you have problems with the brake and the seat safety switch is because you don't set the parking brake, which is what the orange lever on the "driver's" side is for. Set the parking brake and you wouldn't have to rig the seat safety switch to make it stay running. You've commented in the past about not being heavy enough to trip the seat safety switch. Just be patient and give yourself a couple more years growing and it won't be a problem for you anymore LOL! Also, even though you don't have the mower deck on it, you still need to make sure the "blades" aren't "on" as that system has a safety switch in it as well.
Look! There it is! 14:51 He made the face! A young feller just discovered the thrill of hot rodding. In honor of this historic moment I want to propose a grape soda toast to his continued enjoyment with all things mechanical. Congratulations, Brently! 🥤
Great job Bentley! Outstanding work ethics. Praying for you to have a very successful career. I know without a doubt that your Dad is so proud of you! Good job
Hay little grip, great video. I have that same mower. The carb is the cause of the starting issue. After a few days it looses prime. Also be careful shock loading that hydrostatic transmission, it will strip the teeth out of the drive pully.
Oooh sweet, I did that on an old sears and roebuck riding lawnmower, and it twisted the frame. Also welded the rear diff spider gears so she was full posi trac... It did almost 35 mph, I had someone speedo it in a car going down the road. Wear your brain bucket son! GOODTIMES! 👍😎👍
Here's an old one for ya--in my teens, I restored an old Tru-Value tractor-mower. In high school, we had the Industrial Arts class, with a large garage behind the school building. Got her running! Great times, great memories.
Little grip most of the kids don't know what chores are.your parents. Are teaching you a lesson by making you have chores? You just don't understand that yet, but you all will and thank you for your channel. Because my little nephew is autistic and you've got him wanting to go out and work on the Jeep with me. So thank you very much for your channel. You're motivating young kid.
You need a manual mower, one with gears. The hydrostatic transaxles have an internal pressure relief so they will only go so fast and you are probably at the limit already. Its could have a low oil sensor shutting it off on bumps but most likely the float bouncing that is causing your issue if not. Awesome job! 🔥🤘🔥
Bentley, you did find the tractor empty of oil and to my knowledge you didn't ever top it off, unless you did that off camera, so that is a STRONG possibility!
@@user-mv5bu2kk8b No Dude, not talking the residue, he is referring to the backing film on the new sticker...and rubbing alcohol is much better sovent as you don't have to clean the greasy mess from the WD-40 to apply the new sticker anyway and the surface is prepped for the new sticker...sticker class 101
Another good learning experience. It's great watching you learn and improve both your thinking and your mechanical skills. Remember - everything you change is likely to affect something else. You start going faster, you will need to upgrade the suspension and brakes!
Bentley, your Mom's handheld hairdryer on low (so you don't melt the green plastic) for a minute or two would work wonders for removing decals from anything. Then some spray-can Goo Gone and a good rag will take off the residue and sticky stuff pretty quick, you might want to pick up a can when you do your next decal removal or replacement project. ; )
You are so cute ☺️ so glad your on UA-cam you will be just like your dad. Love watching him everyday and you helping him on some of the trucks. Good job will be watching you all the time.
Right on little grip 🤘🏼 your dad and you guys are good people, if I ever have kids they’d be watching your videos. Much respect. Those models are really torquey
Love the content little grip. I've got an old John Deere myself. Pretty much bone stock. I love what you're doing with it and I love that your dad's helping you along the way. Keep it up Bentley. And kudos to your dad Derek. Derek, you're raising a fine boy.
This channel is brilliant. My parents house came with a lawn tractor (old blue ford) 40 years ago - and I must say I never thought of hot rodding it, or jumping it LOL. Suggestion - instead of measuring mph to demonstrate speed increase, you should just film a before and after of your mullet hair blowing back in slow-motion.
I was going to say you might think about a heat gun and flat edge, but you keep doing it your way buddy cause you can get it done. Love watching you work
That pully on the engine is called a "stackedpully " the spindles are located on the cutting deck !!!!! Your doing a wonderful job!!!! I worked on mower and saws for 40 years years message me if you have any questions !!!!! Love LGG VGG ❤
The engine cutting out might be a low oil sensor incorrectly reading due to the bouncing at higher speeds. Might want to lower the tire pressure for a smoother ride.
That was my first thought… Possibly the low oil cut-off sensor/switch due to the bouncing!!! Good thought on the tire pressure too. Think old-school ATV with no suspension.... 😂😂😂🦅🦅🇺🇸🇺🇸
Do these mowers have the cut off switch under the seat? Safety thing if the user falls off the mower shuts it down, mine does and it can trigger if you are going over bumpy terrain.
Great job I also thought the other sticker could go on the hood. But on your tool box is a cool idea one that will last a long time after the tractor dies away.
Awesome job Little Grip. The spare sticker would look cool on the hood right behind the headlight grill. Then you can see it while ripping along the trails.
Borrow dad's heat gun when you get a corner peeled up hit the underside of the sticker with heat pull sticker with pliers or use scaper under the sticker it will slide right off and make clean up easier
Are there any dads out there that have young daughters. Keep an eye on them. This kid will have so many young ladies to pick from. With those sleepy eyes. Some day there will be posters with this kids face on it... Not wanted, but those poster, like at Walmart.
yeah a hair dryer would have got the old stickers off way easier. Pretty cool how you get to figure out much of the project. Dad probably did that too when he was a young fella. Stay grounded and enjoy being a kid, we grow up way too fast
Great job man! The running stuttering and black smoke is a carb issue. Either the float level is a little high so it’s flooding when you hit bumps or the choke is possibly engaging somehow. May want to look into a different style carb altogether. Keep it up!
Man, it’s been great watching Bentley developing grow as a fine young man through this UA-cam channel! He sure does have a lot of confidence! I’m pretty sure great parents help as well! Keep on trucking Bentley nice job!😊
Excellent job and awesome explaination. Back in the day in 'Fitting and Turning' theory class, we had to do pulley calculations on paper, long before electronic calculators, some machines have multiple pulleys of different sizes, drove me crazy.
Great job young man, need to give you a call sign ( aka Speed Racer ) Keep up the great work little friend, looking forward to seeing your next video Gods Blessings be with you and your family always
Hey Little Grip, you should sell the finished pullys in your store. Great job. I use my old LA105 to pull my 4x8 trailer around. Great job! You are doing an awesome job with your channel.
Cutting out on bumps.... Seat sensor? I assume you already disconnected that one. Check for loose wires and connections. Sounds great! Glad you got to take it for a rip and use it for work. Good job Bentley. Keep up the good work. Be safe!
Nice job on the mower! As for the cutting out, see if the engine has a low oil sensor. Jumper that out and see if it runs over the bumps better without cutting out. Otherwise I'm guessing the fuel level in the carb is a bit high and it's flooding out, you could bend the floats down, so the carb bowl holds a bit less fuel. Also, try lowering the tire pressure so the tire sidewalls give a bit on the bumps, that might help too. Those carbs aren't meant to take a lot of rough riding like that, so worst case you might have to graft on a different style carb, more like you would find on a racing engine or a motorcycle. One last thing, that hydro tranny is probably about at its max at those speeds. If you want to go fast on a riding lawnmower, something with regular (non-hydro) gears will take more abuse and probably last longer. Good luck and thanks for the video!
Bentley upping on the John Deere, wearing the Bland National shirt. Too cool! 116k subs can't be wrong! I swear, even at age 58, I learn more from this kid than I do most adults. "Well, I'll be dipped!"
Looks like a fun project. Good job. If you remove that seat switch, there is a wire spring in the connector. Pull it out with needle nose pliers and you don't need to connect the switch.
Great work..i work for john deere and yes the sabre is a well known tractor up here in Canada. Keep it up young man. Oh and btw that small gear is a common replacement parts..just like that triangle piece the gear runs on. And the plastic bushing on top of the gear. X2 lol
That pulley swap was pretty cool that thing is definitely noticeably quicker off the line , definitely looks a lot quicker off the line and you still have some torque it looks like, way to go Bentley.
Be careful pulling that screw driver towards you. I learned the hard way when I was young by it slipping and giving me a good poke in the belly. Keep up the good work.
I think I’ve never seen Bentley more excited than when it started working in the shop. Later I think I saw his mullet smoking and possibly on fire as he tore through the tree rows.
Bentley, put the sticker either on your tool box or the front of your hood. You rock little dude. A little tip... Be aware of your camera angles. Use an extra camera set up to get those action shots. #2 fan cause I know Dad's #1.
Bentley is having way too much fun on his channel and we viewers are along for the ride!
Just happy to see he is posting weekly instead of once every 4-6 months. Yes I know it might slow down once school starts back up, but hey, well take it while we can get it.
Too much fun? What’s that mean? It’s like too many cars there’s no such thing
@@markmeyer403 he’s an 11 year old, they make everything fun😉
I think you should put that last sticker on your tool box.
Great work on the mower, Bentley!
Nope, little fellar got ahead of himself. He said he had a new seat coming, should have never wasted the first sticker on the old seat....gonna need the other to put on new seat.
Hey Bentley? The reason you have problems with the brake and the seat safety switch is because you don't set the parking brake, which is what the orange lever on the "driver's" side is for. Set the parking brake and you wouldn't have to rig the seat safety switch to make it stay running. You've commented in the past about not being heavy enough to trip the seat safety switch. Just be patient and give yourself a couple more years growing and it won't be a problem for you anymore LOL! Also, even though you don't have the mower deck on it, you still need to make sure the "blades" aren't "on" as that system has a safety switch in it as well.
Great video Bentley! I wish I had a pet sasquatch to weld for me.
😂😂😂😂👍
Had them safety squints engaged.
Lol
Great news!!! LGG notifications are working again!!!
Yes, thank goodness.
Yup
Yeah, I got mine today. Yay🎉
First one in six videos here in the Uk ..I was worried the little fella was losing views with us not getting the notifications .
@@craigpimlott204 exactly my thoughts.
Pro tip… to help remove decals use a heat gun to warm them up. Great job on the mower project!!
Easy on the heat that plastic d9nt like ut
Wet rag inon microwave leave 9nmm old sticker for awhile will help
Or park it out in the sun for a bit. No heat gun, use mom's hair dryer.
@@cadifan concur "mom's" hair dryer will work fine
YEP.
Till she finds it on big grips tool box 😂 he b like but but 😂
Look! There it is! 14:51 He made the face! A young feller just discovered the thrill of hot rodding. In honor of this historic moment I want to propose a grape soda toast to his continued enjoyment with all things mechanical. Congratulations, Brently! 🥤
Here! Here! Cheers!
Great job Bentley! Outstanding work ethics. Praying for you to have a very successful career. I know without a doubt that your Dad is so proud of you! Good job
Cheers with a root beer float🍹
It is amazing how much a simple pulley swap can change the performance of a tractor.
Hay little grip, great video. I have that same mower. The carb is the cause of the starting issue. After a few days it looses prime. Also be careful shock loading that hydrostatic transmission, it will strip the teeth out of the drive pully.
That sticker should have read ...little deer lol top job young man
Two Tire Fire. Looks like a blast to drive.
Oooh sweet, I did that on an old sears and roebuck riding lawnmower, and it twisted the frame. Also welded the rear diff spider gears so she was full posi trac... It did almost 35 mph, I had someone speedo it in a car going down the road. Wear your brain bucket son!
GOODTIMES!
👍😎👍
Here's an old one for ya--in my teens, I restored an old Tru-Value tractor-mower. In high school, we had the Industrial Arts class, with a large garage behind the school building. Got her running! Great times, great memories.
Little grip most of the kids don't know what chores are.your parents. Are teaching you a lesson by making you have chores? You just don't understand that yet, but you all will and thank you for your channel. Because my little nephew is autistic and you've got him wanting to go out and work on the Jeep with me. So thank you very much for your channel. You're motivating young kid.
Hey buddy, I would put the other DE CAL on the middle of the hood, , that would look pretty GOOD 💯😎
Fantastic video young man.....the ripping around the yard took me back to my childhood......I'm 56 and was laughing like a 12 yr old....
👣😁👣
She's a ripper, but still a worker. Nice job!
I think your content is better then the old man's. Tell him you need your own bay an lift in the barn .
Great job little fella. I look forward to seeing your videos every week. Keep up the great work. I like seeing your skill set expand.
You need a manual mower, one with gears. The hydrostatic transaxles have an internal pressure relief so they will only go so fast and you are probably at the limit already. Its could have a low oil sensor shutting it off on bumps but most likely the float bouncing that is causing your issue if not. Awesome job! 🔥🤘🔥
Agreed , excellent explanation 👍👍👍
Bentley, you did find the tractor empty of oil and to my knowledge you didn't ever top it off, unless you did that off camera, so that is a STRONG possibility!
Doing a great job learning and picking up knowledge.
Great day when LGG drops! You should buy an old one and turn into a race one, we did as kids and was a blast
If Bent is missing, he's in SC with me and my boys and he's just running 5.0 eighths gettin' ready for the fast stuff!! Get 'um dog!!!
Hello fellow SC'r whereabouts ya at, located in the big town of Pelzer myself! Go to Possum Kingdom Speedway in Belton now and again. 😉😋
Got notified!! I can’t ever get the backing of the stickers either, you’re not alone kid!! Great Job!
Wd40
@@user-mv5bu2kk8b No Dude, not talking the residue, he is referring to the backing film on the new sticker...and rubbing alcohol is much better sovent as you don't have to clean the greasy mess from the WD-40 to apply the new sticker anyway and the surface is prepped for the new sticker...sticker class 101
Another good learning experience. It's great watching you learn and improve both your thinking and your mechanical skills. Remember - everything you change is likely to affect something else. You start going faster, you will need to upgrade the suspension and brakes!
Gr8 content. Black smoke =running rich on fuel. Blue somke = burning oil. White smoke = coolant leak or transmission burned up.
Fun Episode! The "Speed" shots as you went by cracked me up!
So cool watching you! Not many kids now days care about shop work and turning wrenches. Ur patents did awesome! Love all of your families channels!
Great job young man. You would make any parents proud
That looked like a real pain. No jack stands for safety? Great Video. Thank You.
Hi Bently nice video 📹 and workmanship it look like you were doing a Nascar Race 🏁 😅
Great video Bentley.
A lil fellar got himself a real goin to town rig now!
You’re a natural Bentley. Just like your old man. You have a cool gift.
Well done Bentley - Nice to see your looking after that old fella by giving him some work welding 👍😂😂
Bentley, your Mom's handheld hairdryer on low (so you don't melt the green plastic) for a minute or two would work wonders for removing decals from anything. Then some spray-can Goo Gone and a good rag will take off the residue and sticky stuff pretty quick, you might want to pick up a can when you do your next decal removal or replacement project. ; )
Good Job Bentley!
Had a notification. Good job on the John Deere Sabre!
The second-best channel on youtube ;) Love the videos; keep it up!
You are so cute ☺️ so glad your on UA-cam you will be just like your dad. Love watching him everyday and you helping him on some of the trucks. Good job will be watching you all the time.
Right on little grip 🤘🏼 your dad and you guys are good people, if I ever have kids they’d be watching your videos. Much respect. Those models are really torquey
Love the content little grip. I've got an old John Deere myself. Pretty much bone stock. I love what you're doing with it and I love that your dad's helping you along the way. Keep it up Bentley. And kudos to your dad Derek. Derek, you're raising a fine boy.
This channel is brilliant. My parents house came with a lawn tractor (old blue ford) 40 years ago - and I must say I never thought of hot rodding it, or jumping it LOL. Suggestion - instead of measuring mph to demonstrate speed increase, you should just film a before and after of your mullet hair blowing back in slow-motion.
I was going to say you might think about a heat gun and flat edge, but you keep doing it your way buddy cause you can get it done. Love watching you work
That pully on the engine is called a "stackedpully " the spindles are located on the cutting deck !!!!! Your doing a wonderful job!!!! I worked on mower and saws for 40 years years message me if you have any questions !!!!! Love LGG VGG ❤
Good job Bentley! Your skills are honing in. I’m impressed.
The engine cutting out might be a low oil sensor incorrectly reading due to the bouncing at higher speeds. Might want to lower the tire pressure for a smoother ride.
That was my first thought… Possibly the low oil cut-off sensor/switch due to the bouncing!!! Good thought on the tire pressure too. Think old-school ATV with no suspension.... 😂😂😂🦅🦅🇺🇸🇺🇸
Do these mowers have the cut off switch under the seat? Safety thing if the user falls off the mower shuts it down, mine does and it can trigger if you are going over bumpy terrain.
@@adrianhillary7300 He specifically showed you and explained what he did to by pass that? @12:05 Pay attention when Bentley is teaching class! 😉😋
@@repaid1 woops
Agree with the zip tie the seat switch Bently they can be a problem sometimes as a mower gets older
That really scoots
It’s sounds strange to say but I’m just proud of him. Such a good video and there is so much Derek in this kid. But coming into his own.
Great job I also thought the other sticker could go on the hood. But on your tool box is a cool idea one that will last a long time after the tractor dies away.
Good job young man. Glad to see more and more youngsters involved in Motorsports
The black smoke would be the carburetor float bouncing when you hit a bump and choking it out.
Yea, what he said, it probably got that electrical thing on carburetor bowl, check an see if you can put older carburetor on it,
Got my notifications today for the first time, project is looking good… SEE YA!!
Awesome job Little Grip. The spare sticker would look cool on the hood right behind the headlight grill. Then you can see it while ripping along the trails.
Excellent video Bentley :) , Bradley :) and very nice fix up John Deere Lawn.tractor Sabre one and test drive too!
Borrow dad's heat gun when you get a corner peeled up hit the underside of the sticker with heat pull sticker with pliers or use scaper under the sticker it will slide right off and make clean up easier
Are there any dads out there that have young daughters. Keep an eye on them. This kid will have so many young ladies to pick from. With those sleepy eyes. Some day there will be posters with this kids face on it... Not wanted, but those poster, like at Walmart.
LGG is a great podcast I am always interested in learning new things. Thank you sir.
Very Cool Deere Tractor! Nice job Bentley!
🤓🚀Excellent welding on. The 35 project with your dad ! Really proud of you ! ! ! 🤓🚀
Your videos are great thanks for the smiles.😁
Keep it up young man. Your knowledge will be valuable throughout your life.
Bradly, You for sure make your Daddy proud. Good job Dad!
I watched your dad destruct the Corvette then I saw your video and had to watch it too. Great job on the tractor.
yeah a hair dryer would have got the old stickers off way easier. Pretty cool how you get to figure out much of the project. Dad probably did that too when he was a young fella. Stay grounded and enjoy being a kid, we grow up way too fast
Great job man! The running stuttering and black smoke is a carb issue. Either the float level is a little high so it’s flooding when you hit bumps or the choke is possibly engaging somehow. May want to look into a different style carb altogether. Keep it up!
Man, it’s been great watching Bentley developing grow as a fine young man through this UA-cam channel! He sure does have a lot of confidence! I’m pretty sure great parents help as well! Keep on trucking Bentley nice job!😊
Excellent job and awesome explaination. Back in the day in 'Fitting and Turning' theory class, we had to do pulley calculations on paper, long before electronic calculators, some machines have multiple pulleys of different sizes, drove me crazy.
Love the notification!
A hair dryer helps with sticker removal
Great job young man, need to give you a call sign ( aka Speed Racer )
Keep up the great work little friend, looking forward to seeing your next video
Gods Blessings be with you and your family always
What no burnouts on the concrete in front of the shop. Good to see Caprice make a cameo, How's Darrell doing?
Ol saying, Mommas baby Daddys maybe . Ain't no way in heck Derek can not claim this kid . Luv ur videos LVG .
getting big little brother!! Proud of you lil man!!!!
Awesome job, little man! Well done!!!😊❤
Hey Little Grip, you should sell the finished pullys in your store. Great job. I use my old LA105 to pull my 4x8 trailer around. Great job! You are doing an awesome job with your channel.
Glad this got recommended to me. I bet your dad’s so proud of you Bentley !
Might re-check all the safety interlock switches for the running problem. Great job .😊
GOOD JOB!
Good job with the pullies....Nippy John Deere! Thank you...
Cutting out on bumps.... Seat sensor? I assume you already disconnected that one. Check for loose wires and connections. Sounds great! Glad you got to take it for a rip and use it for work. Good job Bentley. Keep up the good work. Be safe!
The oil sensor for some reason on those will not take the bouncing if you unplug it or bypass, it should work fine
Great job Bentley watching you is like watching a young Derek keep up the great videos
Those JD stickers were the highest part of the build😂 they sure are proud of the decals
Nice job on the mower! As for the cutting out, see if the engine has a low oil sensor. Jumper that out and see if it runs over the bumps better without cutting out. Otherwise I'm guessing the fuel level in the carb is a bit high and it's flooding out, you could bend the floats down, so the carb bowl holds a bit less fuel. Also, try lowering the tire pressure so the tire sidewalls give a bit on the bumps, that might help too. Those carbs aren't meant to take a lot of rough riding like that, so worst case you might have to graft on a different style carb, more like you would find on a racing engine or a motorcycle. One last thing, that hydro tranny is probably about at its max at those speeds. If you want to go fast on a riding lawnmower, something with regular (non-hydro) gears will take more abuse and probably last longer. Good luck and thanks for the video!
Bentley upping on the John Deere, wearing the Bland National shirt. Too cool! 116k subs can't be wrong!
I swear, even at age 58, I learn more from this kid than I do most adults. "Well, I'll be dipped!"
Looks like a fun project. Good job. If you remove that seat switch, there is a wire spring in the connector. Pull it out with needle nose pliers and you don't need to connect the switch.
Great work..i work for john deere and yes the sabre is a well known tractor up here in Canada. Keep it up young man. Oh and btw that small gear is a common replacement parts..just like that triangle piece the gear runs on. And the plastic bushing on top of the gear. X2 lol
That pulley swap was pretty cool that thing is definitely noticeably quicker off the line , definitely looks a lot quicker off the line and you still have some torque it looks like, way to go Bentley.
Another great episode sir. Love to watch you having fun
Great job! Imagine how fast you could mow the dirt bike track if it had a deck. Keep wrenching kid!!!
Good job Bentley!! You vids are consistently getting better keep it up!!
Be careful pulling that screw driver towards you. I learned the hard way when I was young by it slipping and giving me a good poke in the belly. Keep up the good work.
You can see this kid has been watching his dad all his life. How God gives us successors. Beautiful.
Easiest way to add a keyway to a tube is to cut a notch in the tube and then insert the key way and you can weld from the outside. Great video
LOOKS PRETTY SWEET
Go get 'em buddy! Nice job on the JD.
I can see that rippen machine is going to go thru a fair share of beltage and tires, lolz! Well done Bently!
Your most recent seems to have been takin down! Keep fighting the system you rock!
I think I’ve never seen Bentley more excited than when it started working in the shop. Later I think I saw his mullet smoking and possibly on fire as he tore through the tree rows.
Bentley, put the sticker either on your tool box or the front of your hood. You rock little dude. A little tip... Be aware of your camera angles. Use an extra camera set up to get those action shots. #2 fan cause I know Dad's #1.
Great job Bently, love your work bud!