Refreshing the E34's Driveline | Zf Transmission, Differential, and Driveshaft | E34 S52 Swap Ep. 4

Поділитися
Вставка
  • Опубліковано 3 лип 2022
  • In today's episode we tackle the rest of the BMW E34's driveline while we wait on S52 parts. So we fully refresh, reseal, and go through the Zf 5 speed, swap out the old differential for a 3.23 Limited slip diff, and we service the entire driveshaft with new giubo, CSB, and center bushing.
    Want 10% off an Odelfi headlamp? Use code "JoshE34" here:
    odelfi.com/discount/JOSHE34?r...
  • Авто та транспорт

КОМЕНТАРІ • 63

  • @ChromaticGarage
    @ChromaticGarage 2 роки тому +3

    I come to UA-cam for ASMR petting videos but I always end up on this guys channel somehow

  • @jianortega6605
    @jianortega6605 2 роки тому +5

    Man I cant wait to see this car done🔥🔥🔥🔥

  • @saucey566
    @saucey566 Рік тому +1

    The filming, editing, and overall production of this video is one of the best I’ve seen! Congratulations on the excellent content.

  • @nextphase7481
    @nextphase7481 2 роки тому +1

    Really enjoying your series on the S52 swap! Great see you go through the step-by-step on the driveline renewal and differential swap. And nice to see others who appreciate the old E34s and their varieties. Thanks!

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому

      Thank you man! Happy others appreciate it as well!

  • @viperocco
    @viperocco 3 місяці тому

    Give this man a beer! Nice work

  • @MrSkoda105s
    @MrSkoda105s Рік тому

    Your video’s are so nice to watch. Liked this one too. The part/struggle with the 140 nm torque was a lot of fun.

  • @damien5267
    @damien5267 Рік тому

    Awesome vid dude thank you for actually hovering the torq specs and other details currently in the middle of my 34’s drive line

  • @drifter2090
    @drifter2090 Рік тому

    Great job! Also they sell just the foam ball for the shifter now on fcp for much less than the whole selector

  • @Coonandfriendsify
    @Coonandfriendsify 2 роки тому

    Excellent work dude, really coming together meow..

  • @madgaming5242
    @madgaming5242 2 роки тому

    Love the videos man

  • @fatoputso7375
    @fatoputso7375 2 роки тому

    Nice work homie!

  • @knightrida6829
    @knightrida6829 3 місяці тому

    Okay well done

  • @user-iv5wo1gj2v
    @user-iv5wo1gj2v 2 роки тому

    Good work 😀😀😀👍👍👍

  • @jpadicecoffee9812
    @jpadicecoffee9812 2 роки тому

    Great job on the repairs. Looks like your health is recovering...

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому

      Oh yeah i kicked covids ass a second time. No issues here, were back to normal

  • @frankbetancourt1814
    @frankbetancourt1814 2 роки тому

    Awesome vid. Also was gonna ask how you like the headband. Saw aidan templins lil
    Commercial badass glad to see it also got the nod from another guy

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому

      I really love it. Thats the only reason I promote it, because it actually comes in handy and lights up hard to access areas very well. 2 thumbs up from me

  • @justswaves
    @justswaves 2 роки тому

    🔥

  • @simontvrner
    @simontvrner 2 роки тому

    Great video Josh. In your experience what is the best source for E34 running gear? Im on the hunt for a 5 speed and LSD for my 525i M50.

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому +1

      Correct me if im wrong but by running gear you mean like swap parts and stuff? Best bet is to find someone parting one out as a whole swap

  • @b3dr01994
    @b3dr01994 2 роки тому

    Great video! Do you by any chance still have the oem numbers for the parts you have used in the gearbox?

  • @funnypranker34
    @funnypranker34 2 роки тому +1

    The reason why it calls to torque to 140 ft lbs then loose and retighten to 89 ft lbs is because the initial torque spec seats the driveshaft flange on the splines. If you put it to 140 ft lbs and slap it in the car you risk damaging the output shaft bearing or that new seal you installed. Also make sure the input shaft bearing don’t need to be replaced within a few months, it’s a horrible sound and requires full disassembly of the trans to replace it. And regarding the power steering system it calls for dextron atf for me so correct me if I’m wrong but Im thinking you can use dextron in it. Also is 80w90 too thin for an lsd? Mine don’t chatter or lock up or anything and I use castrol 80w90 with lsd additive

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому +1

      I assumed thats why it calls for that torque sequence, glad i followed it. Ive had a zf with a bad input bearing, not fun lol. But lots of people run 80w-90 in lsds. Im sure it doesn’t matter much, but bmw did call for 75-140 so stuck with that

    • @funnypranker34
      @funnypranker34 2 роки тому

      @@m3nameisjosh464 I did some research on the oil weight. Bimmerforums members say running 75w90 or even 75w140 (which depending on the application is the specified viscosity) of any brand of gear oil noticed low speed chattering and lock up when the oil is cold when the diff reaches high mileage. Running 80w90 or thicker made the chatter go away. Hopefully yours don’t chatter or lockup at low speeds when winter comes around. My friend has this Nissan sports car he ran a 250 weight gear oil in his aftermarket clutch based diff because the clutch based diffs chatter a lot when you don’t have thick oil in it. I think the e34s only have a VLSD so the thicker fluid allows the diff to work better under higher temperatures and locks up more aggressively and possibly harder

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому

      @@funnypranker34 been running 75w-140 in my 500hp turbo car without any noises or issues so decided to stick with it. I have heard of people experiencing chatter with certain brand fluids and stuff. We will see!

  • @luvrodanklegendarymemer4323
    @luvrodanklegendarymemer4323 2 роки тому

    What are your thoughts on stainless steel pivot pins? I was going to get one from an e31 for my e36 ZF

  • @michaeltorres7709
    @michaeltorres7709 8 місяців тому

    Hey Josh, can I use a 92 525i zf 310z into e36 328i? I'm confused because 310z and 320z output flange look different!

    • @m3nameisjosh464
      @m3nameisjosh464  8 місяців тому +1

      They look different but i never had an issue with putting E36 zf in my e34. The shifter knuckle that linkage attaches to is different

  • @Juntasification
    @Juntasification 2 роки тому

    Why don't you get a movable scissor lift? You got enough space. Once you get close to 50. The joy of rolling on the carage floor gets old real fast :) , but nice job.

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому

      Scissor lifts dont allow you to get in and out from the sides which i feel like would kind of bother me, but definitely need something here. Im feeling too old for this🤣

  • @misterkristofer7344
    @misterkristofer7344 Рік тому

    Hi - what did you pull the S3.23 diff from

  • @justswaves
    @justswaves 2 роки тому

    starting to look for a calypso red 525i

    • @simontvrner
      @simontvrner 2 роки тому +1

      would recommend keeping an open mind on colour. would be a shame to pass up a clean 525i on paint alone!

    • @justswaves
      @justswaves 2 роки тому

      @@simontvrner it’s so hard not too tho lol

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому

      Calypso is one of the best😏😏

  • @Adrix896
    @Adrix896 2 роки тому

    Hey. I just came across your channel and idk if you’ve talked about this on your channel before, but im looking to buy an e34 525i in the range of 1992-1996 and Im wondering about vanos and non vanos. What would you recommend and why ? Especially since Im interested in slapping down a turbo on it later down the line. Also wondering about the transmissions (only manuals) ? Is the ZF better or worse ? Would appreciate all the info, you could share.

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому +1

      Watch my how to but an e34 video! As for vanos or non vanos either one is great. Non vanos is a stronger engine but vanos helps with boost. Zf is the best transmission, only came in 91-92 525s. Getrags are not good for power

    • @Adrix896
      @Adrix896 2 роки тому

      @@m3nameisjosh464 would you say then, that the 91-92 models are the best ? Since M50NV, ZF transmission and LSD ?

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому +1

      @@Adrix896 yeah id say so

    • @Adrix896
      @Adrix896 2 роки тому

      @@m3nameisjosh464 Last question. Is there any way to tell if the car has an LSD ? When Im buying a car, Im not doing a burnout or jacking up the rear tires to spin them with my hand 😄 (to see if they spinnin in the same or opposite direction)

    • @m3nameisjosh464
      @m3nameisjosh464  2 роки тому +1

      @@Adrix896 an S stamped at the bottom or look at tag on back left side

  • @BryanGerish
    @BryanGerish 2 роки тому

    Hi Josh, please lemme know how i can reach you

  • @AliXD-rf5se
    @AliXD-rf5se 2 роки тому

    Hi 👋 man

  • @PHOYTEQ
    @PHOYTEQ 2 роки тому

    Dude, up to European standards this diff looks new

  • @paolopanetta10011
    @paolopanetta10011 2 роки тому

    Love it...ghetto wrenching! lol getting down and dirty with the car up on stands
    No fancy workshop or fancy tools. Good work fella!