Forging Floppy Jaw Tongs
Вставка
- Опубліковано 25 бер 2024
- Find out what I would change to make these tongs better!
Sign up for my newsletter here: farmstead-forge.ck.page/ae7a0...
Things I use in the shop:
- Cutting Wheel: amzn.to/3tW2UxM
- Adjustable Square: amzn.to/3U1TMSU
- Mig welder: amzn.to/4aY49NE
- Welding Magnets: amzn.to/47GJfQn
- Welding Helmet: amzn.to/3SwLbGV
- Angle Grinder: amzn.to/3Ho6QKJ
- 2"x72" Belt Sander: amzn.to/3Hpm16q
- Wire Wheel: amzn.to/3O6YeMC or: amzn.to/3Snayus
- Butcher Block Brush: amzn.to/3O8xpY6
- Wire Brush: amzn.to/4aWYqYl
- Beeswax: amzn.to/3tXZJpm
- Battery Powered Angle Grinder: amzn.to/3HpbTe2
- Rivets: amzn.to/47EhNm3
- Safety Glasses: amzn.to/4b3UrJQ
- Ear Protection: amzn.to/421XQo8 or: amzn.to/3U3ACMA
- Standard & Metric Tape Measure: amzn.to/3vNwRAz
- Metal Pencils: amzn.to/47zvrqM
- Square Set: amzn.to/3S38jLF
- Boiled Linseed Oil: amzn.to/3SkGDTQ
- Dremel: amzn.to/3Sp6eep
- Cotton Buffing Wheel: amzn.to/3U6TVEC
- Polishing Compound: amzn.to/3vFyOzc
- Angle Finder: amzn.to/3tWH510
- Victor Cutting Torch Set w/ Rosebud Tip: amzn.to/48WP8tx
Disclaimer: I only recommend products I use myself and all opinions expressed here are my own. This post may contain what are referred to as “affiliate links.” If you click on a link that brings you to a page where you may like to purchase something, your shopping experience will not be at all affected. However, I may receive a small commission at no additional cost to you. Thank you so much for supporting this channel!
Hi, I'm Jayce, the blacksmith behind Farmstead Forge. I am a farrier by trade; I learned the basics of blacksmithing at shoeing school and the rest I learned on my own. I'm excited to expand my knowledge and continue learning while also sharing my passion with others.
Join me in the shop on my Montana farmstead where I enjoy building tools and other fun projects that we can use around the place.
If you enjoyed this video please consider giving it a like, I’d appreciate it! Also, make sure to subscribe so you don’t miss out on new videos every Tuesday morning!
Connect with me on Instagram: farmsteadforge
Contact Me: jaycefulbright@gmail.com - Навчання та стиль
You learned how to make them better next time, that’s a W in my book
I think I might do some modern modification to this pair with the welder and grinder to make this pair better but the next set I forge I will definitely do a little different. Thanks!
Great sense of humor, you had me laughing with the opening lines!!! Good forging, and discussion. Your first test flight of the floppy Jaw looked and worked well. Looking forward to your next post!
Thanks! Ya I'm definitely going to make some modifications and make the next pair a little different.
I like it Jayce, seems to work pretty darn good. Not easy holding a short taper like that. Might have to give that a try, one of those tools you don't think you need til you have one! Have a good week and happy horseshoeing!
Ya they'll be handy after some refinements! Have a good week!
thanks for your work, and your smile ;) respect from France
Thanks! I'm glad you enjoyed it.
..Tapers are hard to hold on to. Like a toddler going down the candy or cereal aisle at WallyMart. You are on the right track, less floppy. Nice build on them...!
Lol that's hilarious, thanks!
Good video on the build and after mod. I've an old set at the historical forge and several folks like them.
That's cool, I've never seen a set in person, just in pictures.
Fantastic idea for tongs, i use v bit or bolt jaw to hold tapers mostly, they keep working there way out when tapering. Will give these tongs a go when i get time to make them.
Ya I think with less movement in the floppy jaw they'd work great!
Nice idea and execution. Seems to work pretty well. My thoughts, if the the swivel part had a flat or slight 'V' for the gripping surface it would hold better and a bit less movement like you said. Now I already know what my thoughts are worth. I to have friends and neighbors with the same problem.
I thought about the V part but photos I've seen of old ones didn't have it so I wanted to try it without first, and I can always add that later.
I also think that just being flat it would help. Nice tongs for the tapers for sure.@@FarmsteadForge
whats that paste u put ur hotpunch in? vasseline?
Beeswax but I have a video on alternative punch lube if you want to check it out.
The older they are the floppier they get.
😂😂😂
What was that weird punch at 6:30 for?
That's for a fixed rivet style tong, it keeps the rivet seated so the opposite rein can flow around it so there isn't uneven wear. All farrier tools are made that way. I talk more about it in some of my other tong tutorial videos.
I think if your going to hold something on the diagonal you should put a "V" groove in the moveable jaw. A stop works well that is what I have on my flat jaw moveable jaw tongs.
I copied mine years ago from an old cast iron pair patented in the 1860's. They were labeled "universal" tongs cast in the reins.
Good to know, the only ones I've ever seen has just been pictures that were very similar to this set. Thanks for your comment, I appreciate it.