It means a lot, thank you ! I was building and filming this bench last year around this time. Today I went to visit a friend that inherited an old bench from his father in law. It inspired me to go ahead and add to my bench so I will upload those improvements once I will have them made. May you have energy and fun while you build your bench.
@@artofgontea-artist5718 now i'm watching the rest of your videos.And really,i admire you for your fine work. Keep forward,and stay safe and healthy my friend !!!
Nice! brings back memories of making my bench. If you haven't done so already, tip that bench over and put a 1/4" chamfer on the bottom of each leg. The chamfer will prevent the leg bottom from splitting when you need to move the bench in the future.
Thank you ! Thanks for the tip , I already did so. And ever since to block direct moisture sipping in, I put down a linoleum mat. It helps with sliding the bench and it also makes cleaning under very easy .
This particular style of workbench is truly a joy to use....a serious tool for work holding. I built mine a few years ago to Charles Schultz' plan and set it up for the Crucible Tool 1" diameter holdfasts. Same vise...which I have been very satisfied with....some Crubber (Benchcrafters) really helped the vise. I first had it set up with leather...but Crubber gives a much better grip. And yes, it seems to be lasting just fine, I've had mine over a year now. Because mine is set in a left hand corner of the shop, I had to put the leg vise on the right hand side, contrary to usual practice.....and have found it really does not get in the way at all...but then I am 6'3", same height as Paul Sellers...so made the bench height to 39"....and my back is sure pleased. Though it was not done in the 1700's, I did add a sliding deadman, which gets used a good bit. as do a few dogholes in the front edge of the top. Those, I put in 'as needed' as things went along. The suggestion here to chamfer the bottom of the legs is pretty important, I have not done that yet...but once covid allows visitors in the house, I'll get a couple guys to help me tip it over and take care of that. I like it that the bench got a name.....very nice work! "I go to the bench to be quiet with myself" Said by one of the Masters....but it works for me as well. -Veteran '66-68
@Roger Anderson Sir I truly appreciate your eloquent comment. Thank you for sharing all of that insightful knowledge with me. I will use it to add to the bench functionality . One of the things I want to do is build myself a Moxon vise for sawing tasks because My bench is indeed low for planing tasks mainly and ease of assembling work. I’m 5.8 so my bench is much lower. Thank you for your service as well sir.
You made a good use of your quarantine time. The bench is amazing, really a complex project and you put a lot of thought into it. Really, really amazing job!
Thank you very much while I can’t take credit for the music, for the top I used mostly old oak seems to be English oak. A bit of cherry for the outer edges of the top. The end cap is Mahogany that holds the wagon vise mechanism that has a moving block built out of scraps of exotic wood like Purple Heart and padouk. The bench dogs are made of black walnut. The legs and stretchers are made of some conifer species that I believe is pine or fir. It is all reclaimed as well, so it was dry. The leg vise chop is made of solid beech wood.
That was the most relaxing and thrilling 39 minutes! Thank you Ciprian, I really enjoyed that. What a beautiful bench too. It already looks as if it has had 100 years of projects made on it, in the perfect sense. Great music mix too!
I appreciate your comment! It feels good to be able to produce something that can be worth another persons time . Thank you for taking the time to watch this video. For now I’m posting once every two weeks but I’ll be able to post every week soon.
Thank you very much! It is true, it was the best thing I could build for myself, I will upload in the upcoming weeks some improvements and accessories for the bench !
great watching this build I like some of the little touches you added to make it personal like the wood sign and the edge finish grat joints too. I'm very keen to know where you got this quick release vice from. Great job Tom
Thank you Tom! The buses are from Hovarter Custom Vise. They are a company out of Michigan you will find them on the internet. Len Hovarter the creator of theese vises is a talented machinist that invented this chamber quick release mechanism. They have other options as well. I spoke personally to him when I had specific questions and was very helpful to me and very nice. For a combo like mine Wagon and Leg vise the price was very competitive to benchcrafted plus the quick release is very nice ! I recommend them !
Thank you very much . The music is a mix i found on the internet that was royalty free. It is an independent person who made It available. It is called 2 hour ambient fantasy music by unknown artist .
Roughly how large is the gap in the bottom for the tail vise install? I'm planning my bench and i want to plan on how far from the end my legs need to be and im not seeing a great way to figure that out pre build. Thanks!
In my case I had to leave adequate distance to house the rod travel that makes up my wagon vise. If you will be installing a tail vise the mechanism will slide under so you have more freedom I believe on the distance . However I do advise you not to make your bench top shorter than six feet . If you can make it 8 foot long that would be a great size
@@artofgontea-artist5718 thanks! I've got the same vice. I'm not going to do a through tennon roubo, just tennons into the bottom. I had the legs a foot from the ends of the top in my plans, but then I looked at the vise rod and realized I was going to have to move the legs, just wasn't sure how far.
Thank you very much ! My shop is modest in Size It is 5 meters by 2,5 meters. That would be around 16 by 8 feet. I made some improvemts to It and i will post a Detailed tour Where i will explain how i manage the space .
Why did you use a scroll saw to start your slots for the tapered thru tendons on the legs? Also, what is the purpose of the masking tape on your scroll saw table?
Great questions ! Well first , I was hoping that the scroll saw cut was enough to create the indentation for the wedges. However I had to widen it as you saw it later , which I did so by using just the blade of my Dozuki saw , it was the only thing that I had to fit as my leg was already put together . 2. The masking tape is to hold the two sources togheter as I cut the positive and the negative of letters all at once with a 10 degree bevel on my saw . I also use masking tape in order to adhere the drawing to be cut on it . That way I do t have to sand the wood because I glued everything directly on it .
Thank you very much ! You are right it is a magnetic dovetail guide made by David Barron . Mine is the 1:6 ratio . In us you can get it at woodcraft and in Europe at Dieter Schmidt’s fine tools . There are other manufacturers that make similar ones .
Great work man. It seems like your sliding arm on your table saw is sitting higher than your table saw body. It could result in not a square cut. I had to fix that on mine as well
Thank you !! Actually one edge closer to the saw is level with the main top and the rest is slightly lower . I’ve been applying pressure to the main top area while cutting that way it is square. But yes I agree that I do have to adjust it. It is quite fiddly though ..
Thabk you very much! With my Hovarter Leg Vise I am pleased. you do have to maybe anully lubricate It with A special crease that you can Find at auto parts ( It is in the instructions) Id stick with a leg vise because It works well with the Roubo. If you do dowetails a lot , Id make a moxxon vise to clamp to the bench top. I actually plan to build one fir myself
Quasi tutto era vecchio, l’ho preso dal’ una signora che aveva tanto legno per restauro , molto era tarlato ma ho trovato anche pezzi abbastanza buoni . Per il piano ho usato quercia/rovere sembra quello inglese di recupero e anche noce canaletto. Per il tappo de la morsa posteriore ho usato mogano e per la morsa di gamba ho usato Faggio . Per tutto quello sotto ho usato pino vecchio . Per il blocco che tiene il cane che si muove e una mix di legno esotico . Praticamente ho usato che ho avuto.
I see the coop.fi bag. I recently moved to Florence. Where would you go to buy all that lumber? Leroy M and Bricoman have been disappointing! Excellent work on Cecilia
Welcome to Firenze ! Well generally in Italy you would not find a wide selection of already surfaced wood but I recommend a lumber yard or hardwood dealer ( magazzino di legno) I go to L.E.C.O SRL but it’s a bit outside of Firenze at Reggello . Look also on Fecbook marketplace
@@ramc5732 great ! Just make sure you call them first and tell them how much material you need. Because they don’t have prices listed. If you tell them how much you need you can ask what species they have . They do have a lot of continental and exotic woods , it is a warehouse . But they tend to sell large quantities. The wood is sold in boards of 4Meters long minimum. But they can cut it for you to fit in your vehicle. I bought beech and mahogany from there . You will need a planer and a jointer or something to true up the wood. Good luck !
The top is made of reclaimed White oak with a bit of black wallnut and a mahogany end cap. The legs and strechers are made of aged yellow pine. The face vise is European Beech. I basically used what i had since It was Quarantine time.
I used “ Worbenches Design “ book by Cristopher Schwarz as a companion to understand the fisics and the design of Roubo style workbench. But i made my own plan and drawings to suit my Size and body measurments. If people will want to, I am going to make a video explayning Why and how I made everything. I made this Bench in Regello (Firenze )
In sfarsit , vad un roman care stie sa lucreze si nu se face de ras , asa cum am vazut intr-o gramada de vloguri . Buna treaba Ciprian , multumesc . Pe cand un banc de tamplarie de tip european ?
Este vorba despre acel tip de banc de lucru caruia i se mai spune german s-au suedez . Poate fi vazut in vlogurile lui Rob Cosman> Unul din asta am eu la servici .@@artofgontea-artist5718
@@doruvlahu3365 Am inteles. Apreciez sia acel model de banc. Si eu cand lucram intro fabrica de mobila ma avut o versiune similara acelui banc Scandinav. Poate in viitor voi construi unul dar sunt adept al Roubo din m ai multe motive
Solid work bench that's also light and portable. Have brought it to the job site to cut wood on. No complaints!
Superb video my friend, bravo!! greetings from York, England
A quedado fantástico ♥️♥️♥️♥️ Yo usaré ésa técnica para hacer el mío feliz Año nuevo ❤❤❤❤😇😇😇🧉🧉🇦🇷🇦🇷🇦🇷😊😇
Beautiful bench. Particularly impressed that you used recycled timber. Thank you for sharing.
I think I'm going to watch this video once a week until I get my workbench finished. Very inspirational and epic. Thanks for sharing.
It means a lot, thank you ! I was building and filming this bench last year around this time. Today I went to visit a friend that inherited an old bench from his father in law. It inspired me to go ahead and add to my bench so I will upload those improvements once I will have them made. May you have energy and fun while you build your bench.
Nicely done 👍👍👍
Love the music!
@wayneglasco....I didn't watch it because of the music! If I want to listen to music I watch a music video.
more artwork than woodwork. It would be an honor to create anything with that beautiful piece
Thank you for appreciating It. It does inspire me when I walk up to it and start on a project
Beautiful job! You will enjoy this bench your whole life.
Thank you ! I sure will
where can a get those rods for the vise? or what are they called? I see they are smoth and quick release
@@AplusTakeoffs-jb5bv Google : Hovarter Custom Vise
@@artofgontea-artist5718 Yep got it Tank you very much
An amazing piece of work! Thanks for sharing.
thank you very much for watching and for your appreciation !
Such a masterpiece built in a small shed. I am truely impressed. Chapeau
Thank you very much for your impresions and Thanks for watching
A real beautiful and very sturdy workpiece.Congrats !!!
Thank you very much for the compliments . It is indeed sturdy.
@@artofgontea-artist5718 now i'm watching the rest of your videos.And really,i admire you for your fine work. Keep forward,and stay safe and healthy my friend !!!
@@KLIDIMARIA you too ! Thanks a lot 🙏🏻 someone’s time is the most precious thing one can have !
That is a very beautiful bench. Thanks for sharing.
Thank you and Thank you for watching !
Nice! brings back memories of making my bench. If you haven't done so already, tip that bench over and put a 1/4" chamfer on the bottom of each leg. The chamfer will prevent the leg bottom from splitting when you need to move the bench in the future.
Thank you ! Thanks for the tip , I already did so. And ever since to block direct moisture sipping in, I put down a linoleum mat. It helps with sliding the bench and it also makes cleaning under very easy .
Amazing job, great use of the tools.
Thank you 🙏🏻
Your work shows the name you’ve chosen: Successful, joyful, and freedom lover (Gontea). Please continue the journey.
Ok... I'm in Love!!! 😍 the craftsmanship, the choice of wood, the design... the guys an artisan!
Thank you very much !
This particular style of workbench is truly a joy to use....a serious tool for work holding. I built mine a few years ago to Charles Schultz' plan and set it up for the Crucible Tool 1" diameter holdfasts. Same vise...which I have been very satisfied with....some Crubber (Benchcrafters) really helped the vise. I first had it set up with leather...but Crubber gives a much better grip. And yes, it seems to be lasting just fine, I've had mine over a year now. Because mine is set in a left hand corner of the shop, I had to put the leg vise on the right hand side, contrary to usual practice.....and have found it really does not get in the way at all...but then I am 6'3", same height as Paul Sellers...so made the bench height to 39"....and my back is sure pleased. Though it was not done in the 1700's, I did add a sliding deadman, which gets used a good bit. as do a few dogholes in the front edge of the top. Those, I put in 'as needed' as things went along. The suggestion here to chamfer the bottom of the legs is pretty important, I have not done that yet...but once covid allows visitors in the house, I'll get a couple guys to help me tip it over and take care of that. I like it that the bench got a name.....very nice work!
"I go to the bench to be quiet with myself" Said by one of the Masters....but it works for me as well.
-Veteran '66-68
@Roger Anderson Sir I truly appreciate your eloquent comment. Thank you for sharing all of that insightful knowledge with me. I will use it to add to the bench functionality . One of the things I want to do is build myself a Moxon vise for sawing tasks because My bench is indeed low for planing tasks mainly and ease of assembling work. I’m 5.8 so my bench is much lower. Thank you for your service as well sir.
Bravo. Très très beau travail. Félicitations.
Merci beacoup!
This workbench is poetry, history, tradition, life. Really love it
Thank you very much for your appreciation !
You made a good use of your quarantine time. The bench is amazing, really a complex project and you put a lot of thought into it. Really, really amazing job!
Awesome work!!
Enjoyed the close shots and music was great!!!
Thank you very much while I can’t take credit for the music, for the top I used mostly old oak seems to be English oak. A bit of cherry for the outer edges of the top. The end cap is Mahogany that holds the wagon vise mechanism that has a moving block built out of scraps of exotic wood like Purple Heart and padouk. The bench dogs are made of black walnut. The legs and stretchers are made of some conifer species that I believe is pine or fir. It is all reclaimed as well, so it was dry. The leg vise chop is made of solid beech wood.
Amazing workbench, congrats!!!
Absolutely stunning!
Thank you very much !
Really nice work!
That is a really great project!
That was the most relaxing and thrilling 39 minutes! Thank you Ciprian, I really enjoyed that. What a beautiful bench too. It already looks as if it has had 100 years of projects made on it, in the perfect sense. Great music mix too!
I appreciate your comment! It feels good to be able to produce something that can be worth another persons time . Thank you for taking the time to watch this video. For now I’m posting once every two weeks but I’ll be able to post every week soon.
Excellent workmanship; this turned out very well. I'm sure this bench will bring you pleasure every time you visit the work shop. Best wishes. :)
Thank you very much! It is true, it was the best thing I could build for myself, I will upload in the upcoming weeks some improvements and accessories for the bench !
Complimenti. Bellissimo lavoro.
Grazie mille !
Great work! I have envy of your skills! What's the quick release leg vise accessories brand?
Thank you very much ! The leg Vise is made by “Hovarter “ in Michigan . Type Hovarter Custom Vise
Excellent work here 👊🏾
Parabéns pelo trabalho excelente!!!👏👏👏👏
Forte abraço aqui do Brasil
Welton
Thank you very much ! I’m sending you a big hug back !
@@artofgontea-artist5718 strong hug
what leg vice hardware did you use? great build!
never mind i found it! again great build
Hovarter custom vise . 🙏🏻 thank you
great watching this build I like some of the little touches you added to make it personal like the wood sign and the edge finish grat joints too.
I'm very keen to know where you got this quick release vice from.
Great job
Tom
Thank you Tom! The buses are from Hovarter Custom Vise. They are a company out of Michigan you will find them on the internet. Len Hovarter the creator of theese vises is a talented machinist that invented this chamber quick release mechanism. They have other options as well. I spoke personally to him when I had specific questions and was very helpful to me and very nice. For a combo like mine Wagon and Leg vise the price was very competitive to benchcrafted plus the quick release is very nice ! I recommend them !
Belo trabalho!!!
Parabéns👍👏👍👏
Really enjoyed watching you work. I also enjoyed the music. Can you tell me anything about the music?
Thank you very much . The music is a mix i found on the internet that was royalty free. It is an independent person who made It available. It is called 2 hour ambient fantasy music by unknown artist .
Roughly how large is the gap in the bottom for the tail vise install? I'm planning my bench and i want to plan on how far from the end my legs need to be and im not seeing a great way to figure that out pre build. Thanks!
In my case I had to leave adequate distance to house the rod travel that makes up my wagon vise. If you will be installing a tail vise the mechanism will slide under so you have more freedom I believe on the distance . However I do advise you not to make your bench top shorter than six feet . If you can make it 8 foot long that would be a great size
@@artofgontea-artist5718 thanks! I've got the same vice. I'm not going to do a through tennon roubo, just tennons into the bottom. I had the legs a foot from the ends of the top in my plans, but then I looked at the vise rod and realized I was going to have to move the legs, just wasn't sure how far.
Perfecto amigo, tienes los planos de la mesa de trabajo?
gracias ! No tengo planes detallados para ello ahora. Pero empezaré a trabajar en ellos.
Absolutely beautiful. What is the dimension of your shop?. I am having one designed right now.
Thank you very much ! My shop is modest in Size It is 5 meters by 2,5 meters. That would be around 16 by 8 feet. I made some improvemts to It and i will post a Detailed tour Where i will explain how i manage the space .
@@artofgontea-artist5718 I like it. "Modest" is my style.
What kind of quick release vises were they?
They re made by Hovarter . Google Hovarter Custom Vise. By Lenco Tools
¡Qué maravilla de trabajo! Amazing!
Gracias !
👏👏👏👍👋!
Excellent work here
Thank you very much
Beautiful.
Ok... that was awesome!
thank you very much!
Why did you use a scroll saw to start your slots for the tapered thru tendons on the legs? Also, what is the purpose of the masking tape on your scroll saw table?
Great questions ! Well first , I was hoping that the scroll saw cut was enough to create the indentation for the wedges. However I had to widen it as you saw it later , which I did so by using just the blade of my Dozuki saw , it was the only thing that I had to fit as my leg was already put together . 2. The masking tape is to hold the two sources togheter as I cut the positive and the negative of letters all at once with a 10 degree bevel on my saw . I also use masking tape in order to adhere the drawing to be cut on it . That way I do t have to sand the wood because I glued everything directly on it .
Which brand of chisels do you use?
Lie Nielsen
loved your dovetail work. What was that metal guide you used? It looked like it had a magnetic disc to keep the saw aligned.
Thank you very much ! You are right it is a magnetic dovetail guide made by David Barron . Mine is the 1:6 ratio . In us you can get it at woodcraft and in Europe at Dieter Schmidt’s fine tools . There are other manufacturers that make similar ones .
Johnathan Katz-Moses sells a dovetail guide with magnets to help guide the saw as well
What is this!!!!!!!! Amazing!!!!
Great work man. It seems like your sliding arm on your table saw is sitting higher than your table saw body. It could result in not a square cut. I had to fix that on mine as well
Thank you !! Actually one edge closer to the saw is level with the main top and the rest is slightly lower . I’ve been applying pressure to the main top area while cutting that way it is square. But yes I agree that I do have to adjust it. It is quite fiddly though ..
Beautiful bench. How do you like the hovarter equipment? Trying to decide between a bench crafted leg vise and a hovarter twin vise
Thabk you very much! With my Hovarter Leg Vise I am pleased. you do have to maybe anully lubricate It with A special crease that you can Find at auto parts ( It is in the instructions) Id stick with a leg vise because It works well with the Roubo. If you do dowetails a lot , Id make a moxxon vise to clamp to the bench top. I actually plan to build one fir myself
I’ll second the hovarter leg vise, it works well.
Do a voice over with this. It would be great.
That’s a great suggestion
In a Clint Eastwood 'Unforgiven' tone.
Che legno hai usato per questo progetto?
Quasi tutto era vecchio, l’ho preso dal’ una signora che aveva tanto legno per restauro , molto era tarlato ma ho trovato anche pezzi abbastanza buoni . Per il piano ho usato quercia/rovere sembra quello inglese di recupero e anche noce canaletto. Per il tappo de la morsa posteriore ho usato mogano e per la morsa di gamba ho usato Faggio . Per tutto quello sotto ho usato pino vecchio . Per il blocco che tiene il cane che si muove e una mix di legno esotico .
Praticamente ho usato che ho avuto.
I see the coop.fi bag. I recently moved to Florence. Where would you go to buy all that lumber? Leroy M and Bricoman have been disappointing! Excellent work on Cecilia
Welcome to Firenze ! Well generally in Italy you would not find a wide selection of already surfaced wood but I recommend a lumber yard or hardwood dealer ( magazzino di legno) I go to L.E.C.O SRL but it’s a bit outside of Firenze at Reggello . Look also on Fecbook marketplace
@@artofgontea-artist5718 grazie.. I will go there this week, about 20 mins drive from where I live🙏
@@ramc5732 great ! Just make sure you call them first and tell them how much material you need. Because they don’t have prices listed. If you tell them how much you need you can ask what species they have . They do have a lot of continental and exotic woods , it is a warehouse . But they tend to sell large quantities. The wood is sold in boards of 4Meters long minimum. But they can cut it for you to fit in your vehicle. I bought beech and mahogany from there . You will need a planer and a jointer or something to true up the wood. Good luck !
Is that Elm??
The top is made of reclaimed White oak with a bit of black wallnut and a mahogany end cap. The legs and strechers are made of aged yellow pine. The face vise is European Beech. I basically used what i had since It was Quarantine time.
Как тяжело себя заставить все это сделать)
Did you follow a plan or did you make your own? Bellissimo bench anyway and nice compromise between unplugged and plugged tools.
I used “ Worbenches Design “ book by Cristopher Schwarz as a companion to understand the fisics and the design of Roubo style workbench. But i made my own plan and drawings to suit my Size and body measurments. If people will want to, I am going to make a video explayning Why and how I made everything. I made this Bench in Regello (Firenze )
@@artofgontea-artist5718 ahhh, I lived nearby years ago and I could fell a familiar taste: l’ll follow your channel and get the book. Thanks
@@stefanoricci1051 Grazie mille Stefano, sono in Italia d’un ano e mezzo. Thanks for following my channel , I started to post regularily again .
Brilliant!
Thank you 🙏🏻
There are bug-infested boards. How do you intend to fix that compromised wood? Filler won't do the job Mate...
Theyre gone now ... and i filled the holes with epoxy
buen trabajo
Fantástico!🇧🇷
Grazie !
In sfarsit , vad un roman care stie sa lucreze si nu se face de ras , asa cum am vazut intr-o gramada de vloguri . Buna treaba Ciprian , multumesc . Pe cand un banc de tamplarie de tip european ?
Va mulțumesc mult pentru aprecieri! Nu am înțeles întrebarea dumneavoastră cu privire la Bancul european.
Este vorba despre acel tip de banc de lucru caruia i se mai spune german s-au suedez . Poate fi vazut in vlogurile lui Rob Cosman> Unul din asta am eu la servici .@@artofgontea-artist5718
@@doruvlahu3365 Am inteles. Apreciez sia acel model de banc. Si eu cand lucram intro fabrica de mobila ma avut o versiune similara acelui banc Scandinav. Poate in viitor voi construi unul dar sunt adept al Roubo din m ai multe motive
Co je to za vosk (wax)
thank you
We're looking for land to build a house. I'll build a Roubo when I have a permanent shop.
Wtf happened to the sound ☹
carcoma muerta en la madera