Haha I love it! Awesome video work again, but here in a couple of hours you are in for a big surprise my friend. Your Fastest 6S Dolphin title is going bye bye!
Thanks Jeff, I recon this title will go back and forth like a tennis ball over the next few months. My original setup shouldn’t be hard to beat but my new build could be interesting. Anyway good luck buddy and looking forward to the video👍
TheTomJon, welcome to the channel my friend. I have a playlist featuring all the dolphin videos if you enjoyed watching the version 2. The version 3 build has started as all parts has arrived and the new build and speed run video will be coming soon so stay tuned. Rotor Flex 👍
Such a cool build and i love the back anf forth with you and jeff. I wanna throw my hat in the ring. Ive got a single motor 6s dolphin with a 28mm motor and im about to try a 7 inch prop out if the weather ever gets better
This video made me think about getting into an rc winged ac. But then I thought about all the money I spend already on FPV drone flying. I'll enjoy from the sidelines for the time being!! Awesome video and competition!! Subbed to follow.
Yes I am running a high kv inrunner On 4S with a cut down cam speed propeller Really loved seeing The Mods you made ❤ I will have to incorporate a few of them into my next build Go get him buddy Switch to more pitch and less diameter and you will get more speed
@@warbirdflyerF4U that’s awesome. Good to hear that there is still some knowledgeable modellers out there who understand that a smaller prop and more pitch means more speed. A lot of people on UA-cam think a larger prop is the answer when it’s not. Cutting down the prop is something I use to do in my old nitro days, I must give it ago and see if I can gain a little more speed with the pitch aggression. Again thanks for the comments and check out my latest speed run videos. I’m about to head out to attempt a 200mph run so wish me luck buddy…..Rotorflex👍
Hopefully I can kinda match it or beat it 😬 probably not. To be honest im not looking for the dolphin to be a speed demon. I have a goblin for that and a alpha stike that I’ve had 211mph in. There my 2 speedys
@@ttucker2073 with the correct motor/ prop combo you could beat my dolphin record no problem. Just remember to upgrade the servos and elevons to handle the extra air speed as I learned that the hard way😂
You guys are doing awesome I love the competition ❤ I will have to figure out how to upload a video and start my own channel I already have you guys beat by a mile Both my funjetand my dolphin go over 200 mph. Pito tube and gps confirmed 👌
@@warbirdflyerF4U that’s awesome, you must be using an In runner motor to achieve those speeds? Upload your videos as they will do extremely well on UA-cam buddy. Thanks for the comment and look forward to the footage…..Rotorflex👍
Thanks for the honest feedback, it’s much appreciated. Music is something we all have personal taste in and is good to get some constructive criticism. I will try to make the sound tracks more universal in the future👍
@@The_regular couldn’t agree more. Unfortunately the rest of the Dolphin community are claiming their top speed run numbers by recording max speed in a near vertical dive like the 12s Dolphin and Jeff’s latest run. Only way to compete fairly is to do the same. The other airframes can’t sustain any kind of high speed passes when on the level unlike mine. It would be better to do a horizontal plus vertical speed run to get a better comparison of power and aerodynamics. Thanks for the comment and the 🐓 emoji definitely gave me a laugh. Cheers……Rotorflex👍
@@torquedude I think after my drak died I want to build a speed dolphin, I used to have one when they first came out it’s a great airframe! I could get mine over 120MPH on 4S with a badass 2320 1800KV
@@The_regular awesome buddy, a 4s dolphin is definitely capable of high speeds with the correct setup. If you are building a new dolphin check out my latest video as I made a lot of aerodynamic modifications and improvements that will help with top speed and flight time. If you have any questions about the mods just drop me a comment and I’ll be happy to help……Rotorflex👍
FpvBerget, thanks for your comment. The area that we fly has a constant decline towards the sea. The approach to the field requires the crossing of a roadway, trees and power lines, keep an eye on the artificial horizon and you’ll see that there is little negative pitch with a last second pull out before I meet the ground running uphill. I could do these runs up higher but doesn’t make for a good video in my eyes as I like to capture the speed run from the ground.
For anyone interested in how to calculate pitch speed into miles an hour Is the formula is as follows Kv. X volts X pitch X.000947 X drag coefficient. ! Most flying wings have a d.c. of .7 to .75 drag coefficient! Trainers are .6. Jets may be .75 to .8. Example 2200 kv.x16.8 volts x 5.5 pitch x .75 d.c x .000947= 144 mph
@@warbirdflyerF4U brilliant, thanks for posting as most aren’t aware of such an equation. You can also use the online mr D prop calculator, I use it for all my speed setups for the theoretical top speed of the motor prop setup inline with the inputted voltage ( battery ). Again thanks for posting and feel free to share your knowledge with others as this is the true hobbyist spirit…. Rotorflex👍👍👍
I thought pitch speed was simply propeller speed for a given RPM. Isn't that what you provided a speed estimate for a given motor, prop, battery, airframe combination?
@@Andy-df5fj yes but the one thing you can’t calculate for is the airframe drag. The calculation is also theoretical and doesn’t allow for real world such as air density/pressure. It gets you close if you are wanting to attempt a given speed. That’s why I cleaned the airframe up as much as I could to reduce as much drag as possible but unfortunately it wasn’t enough. My next move is a different motor and prop combo. Hopefully I can break the 200mph mark next run……Rotorflex👍
Excellent build ! Curious how you painted yours and was able to get the paint to stick to the foam. I have tried painting ATOMRC kits twice and it seems I cannot get the paint to adhere. Just eventually flakes off. Thanks
@alcmann, I clean the surface I want to paint 2/3 times using isopropyl alcohol to remove the mold release agent. Make sure to change the cloth each time as the release agent sticks to the cloth. I also paint with Rustoleum aerosol as it takes well to the foam. Hope that helps and thanks for the comment….Rotor Flex
Hey davidwanj, they are BetaFPV Pavo Series COB LED Strip lights. Super flexible and stick on. Easy to use but you need to select what fixed colour you want as they are not RGB type.
It carbon fibre weave material. If you plan on doing the same get your hands on the thinnest weave you can as it’s extremely strong when the finishing epoxy is added. If you haven’t worked with Carbon fibre check out a few tutorials on UA-cam before applying it to a model. I used a similar technique to fibreglassing and it turned out great…..Rotorflex👍
Hey henry3618, yes still using the FIVE33 2207 2070kv champ edition, great little motor so far and seems well built. I’m using different batteries such as custom build Molicel P45B 21700 (6s config) and I have an old 1500mah 6s lipo. I should really invest in a new lipo for this but hate paying the postage prices for lipos here in the uk. Molicel perform very well but still not as good as a high C rating lipo.
@@Oregonremote I use aero naut carbon probs but have recently switched to carbon speed by super for my version 3 testing. I have never had any issues with Carbon probs, only wooden props when there tips go supersonic. Thanks for the comment…Rotorflex👍
I am surprised how stable your Dolphin flies at these speeds. Apart from your Elevon mod, do you have any other special settings in iNAV that make your Dolphin fly so smoothly? It would be nice if you could share yor settings. I fly my Dolphin with a 6s 1400 battery, 2807 1500 KV motor with a 7" 4.5 prop. When I am high on the throttle my Dolphin bounces around and it does not feel very stable in horizon/acro mode.
CptPotti, skinning the Elevons made a massive difference to the top speed stability but another thing to consider is any external attachments creating turbulence and will definitely cause instability at high speeds. My inav settings are the same as what comes on the original atomrc 405 wing board and been copied across onto the speedybee 405 wing fc. I cant remember of the top of my head but I think atomrc add there own profiles to all their boards depending on what airframe you buy from them. The only thing I have done regarding the inav tuning is an auto tune but no PID’s adjusted from what came on the board. I can still give you a copy of the PID’s from my board if you want? Hope you get it flying nice at high speeds soon 👍
@@torquedude I bought the kit version of the Dolphin, so I don't have any AtomRC stock settings. So far I fly with the standard Inav settings + the PIDs after the autotune. I would be delighted if you would share the AtomRC settings with me. Maybe that will improve the flight characteristics a bit. The Dolphin is my first RC airplane, so I still have a lot to learn. The only external attachment I have is my complete O3 air unit. However, I would like to keep the air unit outside, as cooling is otherwise very difficult. The bouncing only occurs in Acro / Horizon mode, in manual mode my Dolphin flies well even at high speeds. Since I mainly use my Dolphin for cruising, I want to get a good tune for the stabilized flight modes.
Hi. What is you auto launch speed set to. I want to build a 6s but don’t want torque roll during take off. Was thinking to set the launch to about 1700, idle at 1500. What are your settings. Thanks
Hey ttucker2073, it depends on a number of factors such as airframe weight, motor and propeller combo and battery size. If you are building a custom dolphin it’s best to configure the launch settings to suit your own airframe by holding it vertical and finding the sweet spot on the throttle where it just about wants to climb. Mr D - falling with style does a great video on the above technique. The auto launch for my build is 1750 but bare in mind my airframe is much lighter than standard with a high kv motor. Hope that helps. Thanks for the comment 👍
@@torquedude great thank you. I will be possibly using a cobra motor, think 2350kv or a t-motor 2600kv. So will be high kv and want to go 6s. But will normally fly 5s. Possibly 4s2p (p42) also for long slow flight.
@@jordancoleman2402 I'd bet you aren't epileptic either. So of us have to be very careful because flashing lights or some loud beats can trigger an episode. Interesting enough, if it's lower volume it's less likely BUT if you turn the volume down, there goes hearing the narrator too
Bobjoatmon1993, thanks for your comment and I really appreciate the honest feedback. Moving forward as a creator I will definitely bare this in mind as I’d like the videos to be suitable for all my viewers. How did you find the video content minus the audio? I have just realised a new video on my channel ua-cam.com/video/UYusSp1CB6M/v-deo.htmlsi=iejrBQYbut5CVnHf please check it out as I took into consideration the audio this time. The video is some of my other Rc flying adventures and not the AtomRc dolphin challenge as I’m waiting on another AtomRC airframe arriving to build a faster V3 version. Stay tuned for more. Thanks again for the feedback. Rotor Flex👍
Would a tmotor f60 2020kv be a good Choice or 6s? Occasionally 4s since i have so many. I have a brand new motor from a old race quad that needs a home.
Hey squirrelynutz1, TMotor’s are a fantastic motor and there F series are great. I run a set on my quad with zero issues. You will need to think about what size of prop/props you are going to use, especially if you are using different voltage battery packs. There is a great calculator online to match a suitable prop with motor kv and battery voltage www.mrd-rc.com/tutorials-tools-and-testing/useful-tools/propeller-speed-calculator/
No no ...Siete lenti😅😅 io con il mio Dolphin 6s 250kmh in piano .....record 289kmh l'ultimo video caricato 272kmh in picchiata FURIABUIA 😅🙋♂️🙋♂️🙋♂️🙋♂️🙋♂️🫡
Stay down.normal5323, trust me you haven’t seen diving yet. Artificial horizon still in the osd. A nose down dive or a 45 degree drive the osd will go off screen on inav. You’re more than welcome to join but we are playing with dolphins at the moment. I have hot liners and nitro aircraft that would make my dolphin look like it’s parked! It’s about the airframe and how far the airframe can be pushed. You should definitely build a dolphin and join in, the more the merrier…..Rotorflex👍
@@torquedude i just might its been a few months since I built a rig. I have too many but all are 4s from 600mm ,688mm,900mm,1.1m 7feet the opterra. I have a good motor prop combo I would like to put on one and a few tricks
@@staydown.normal5323 that would be cool buddy. I know the feeling having to many rigs but we only live once so definitely go for it. I have just finished building my version 3 dolphin and will be attempting to break the 190mph mark. Wish me luck and keep an eye out for the video coming soon of the build and top speed runs. If you need any info on my dolphin mods just let me know, would be happy to help another speed enthusiast out……cheers, Rotorflex👍
You’re not testing the true speed of the actual aircraft if you’re diving, anything can dive and go faster and from any height can get more speed. Yes, it’s a fast plane or wing whatever you wanna call it. The only thing was that suck about wings is there stability is shit.
Haha I love it! Awesome video work again, but here in a couple of hours you are in for a big surprise my friend. Your Fastest 6S Dolphin title is going bye bye!
Thanks Jeff, I recon this title will go back and forth like a tennis ball over the next few months. My original setup shouldn’t be hard to beat but my new build could be interesting. Anyway good luck buddy and looking forward to the video👍
I'm more worried about the amps reaching 137. Mine pulls 80a at 125.
Use some 18650's and do a 8s or 12s build @JeffDoesThis
Haha, some competition, love it. I did notice that "Jeff Does This" is going horizontally while you Torquedude, are gaining speed while going down.
Browsing, saw this comment and instantly subscribed. Love the friendly competition!
You tell him big fella! Who needs two motors? He’ll just has to try harder or just except YOU do have the fastest Dolphin on the tube.👍👍👍👍👍
Came for the build, stayed for the daft punk, subbed for the drama
TheTomJon, welcome to the channel my friend. I have a playlist featuring all the dolphin videos if you enjoyed watching the version 2. The version 3 build has started as all parts has arrived and the new build and speed run video will be coming soon so stay tuned. Rotor Flex 👍
Love to see my ESC cover and Motor Mount designs here! :D Greetings from Aspir3, keep on rocking!
Aspir3, awesome design and great work! Thanks for uploading them and keep up the great work. Thanks for the comment and stay tuned buddy….Rotor Flex
Such a cool build and i love the back anf forth with you and jeff. I wanna throw my hat in the ring. Ive got a single motor 6s dolphin with a 28mm motor and im about to try a 7 inch prop out if the weather ever gets better
Fp-AvERY, you’re more than welcome to jump in. The dolphin is a great little airframe to play around with, lots of modifications to be had👍👍
This video made me think about getting into an rc winged ac. But then I thought about all the money I spend already on FPV drone flying. I'll enjoy from the sidelines for the time being!! Awesome video and competition!! Subbed to follow.
DINSTARR-FPV, thanks for the sub, much appreciated. Yes enjoy the videos and hopefully you'll get the taste for a fixed wing fpv setup 👍🏼
@@torquedude you are welcome! 🍻🤙🏾
you can build one cheap I do it all the time on my
Yes I am running a high kv inrunner On 4S with a cut down cam speed propeller Really loved seeing The Mods you made ❤ I will have to incorporate a few of them into my next build Go get him buddy Switch to more pitch and less diameter and you will get more speed
@@warbirdflyerF4U that’s awesome. Good to hear that there is still some knowledgeable modellers out there who understand that a smaller prop and more pitch means more speed. A lot of people on UA-cam think a larger prop is the answer when it’s not. Cutting down the prop is something I use to do in my old nitro days, I must give it ago and see if I can gain a little more speed with the pitch aggression. Again thanks for the comments and check out my latest speed run videos. I’m about to head out to attempt a 200mph run so wish me luck buddy…..Rotorflex👍
Definitely the fastest Dolphin on UA-cam! No one can deny that
Thanks irvine40, shame about the colder conditions on the day 🥶, when it finally warms up here it will perform better, roll on summer 👍
Hopefully I can kinda match it or beat it 😬 probably not. To be honest im not looking for the dolphin to be a speed demon. I have a goblin for that and a alpha stike that I’ve had 211mph in. There my 2 speedys
@@ttucker2073 with the correct motor/ prop combo you could beat my dolphin record no problem. Just remember to upgrade the servos and elevons to handle the extra air speed as I learned that the hard way😂
@@torquedude 😂🙈👍🏻
You guys are doing awesome I love the competition ❤ I will have to figure out how to upload a video and start my own channel I already have you guys beat by a mile Both my funjetand my dolphin go over 200 mph. Pito tube and gps confirmed 👌
@@warbirdflyerF4U that’s awesome, you must be using an In runner motor to achieve those speeds? Upload your videos as they will do extremely well on UA-cam buddy. Thanks for the comment and look forward to the footage…..Rotorflex👍
Jeffs twin tractor setup is an abomonation drag monster...lol....Hes got no idea bless him....🤔😏😏😏🇬🇧
😂😂😂
I read this 5 minutes ago and I’m still laughing, very good englishturbines 😂
guy in my crew runs a 6s dolphin, we're gonna smoke you, maybe
Wlknier, yes go for it buddy, the more challengers the better. Rotor Flex 👍
I might have learned something from the vid but I had to stop watching from being so annoyed at the music.
Thanks for the honest feedback, it’s much appreciated. Music is something we all have personal taste in and is good to get some constructive criticism. I will try to make the sound tracks more universal in the future👍
Ok there must be some rules as much as I dislike them or at least something for you guys to break. Let’s start by level flight only.
Doing a speed run in a dive is like taking a picture of your wiener up close with a wide angle lens and saying you have the biggest 🐓 in the room.
@@The_regular couldn’t agree more. Unfortunately the rest of the Dolphin community are claiming their top speed run numbers by recording max speed in a near vertical dive like the 12s Dolphin and Jeff’s latest run. Only way to compete fairly is to do the same. The other airframes can’t sustain any kind of high speed passes when on the level unlike mine. It would be better to do a horizontal plus vertical speed run to get a better comparison of power and aerodynamics. Thanks for the comment and the 🐓 emoji definitely gave me a laugh. Cheers……Rotorflex👍
@@torquedude I think after my drak died I want to build a speed dolphin, I used to have one when they first came out it’s a great airframe! I could get mine over 120MPH on 4S with a badass 2320 1800KV
@@The_regular awesome buddy, a 4s dolphin is definitely capable of high speeds with the correct setup. If you are building a new dolphin check out my latest video as I made a lot of aerodynamic modifications and improvements that will help with top speed and flight time. If you have any questions about the mods just drop me a comment and I’ll be happy to help……Rotorflex👍
Diving in a "speedrun" seems like cheating... Why not then dive straight down with 3D speed?
FpvBerget, thanks for your comment. The area that we fly has a constant decline towards the sea. The approach to the field requires the crossing of a roadway, trees and power lines, keep an eye on the artificial horizon and you’ll see that there is little negative pitch with a last second pull out before I meet the ground running uphill. I could do these runs up higher but doesn’t make for a good video in my eyes as I like to capture the speed run from the ground.
that plane is awesome 😒💪👍👍👍😃😎😎subscribed 👍 😀
Rcplaytime, cheers buddy. Much appreciated 👍👍
great vid!!!!!! cant wait to see more
Moneyluis7809, stay tuned, More to come!
Jeff has a huge disadvantage with the twin tractor setup. He may still even have the back motor still attached.
Just looking at it, you can feel the drag.
For anyone interested in how to calculate pitch speed into miles an hour
Is the formula is as follows
Kv. X volts X pitch X.000947 X drag coefficient. ! Most flying wings have a d.c. of .7 to .75 drag coefficient! Trainers are .6. Jets may be .75 to .8. Example
2200 kv.x16.8 volts x 5.5 pitch x .75 d.c x .000947= 144 mph
@@warbirdflyerF4U brilliant, thanks for posting as most aren’t aware of such an equation. You can also use the online mr D prop calculator, I use it for all my speed setups for the theoretical top speed of the motor prop setup inline with the inputted voltage ( battery ). Again thanks for posting and feel free to share your knowledge with others as this is the true hobbyist spirit…. Rotorflex👍👍👍
I thought pitch speed was simply propeller speed for a given RPM.
Isn't that what you provided a speed estimate for a given motor, prop, battery, airframe combination?
@@Andy-df5fj yes but the one thing you can’t calculate for is the airframe drag. The calculation is also theoretical and doesn’t allow for real world such as air density/pressure. It gets you close if you are wanting to attempt a given speed. That’s why I cleaned the airframe up as much as I could to reduce as much drag as possible but unfortunately it wasn’t enough. My next move is a different motor and prop combo. Hopefully I can break the 200mph mark next run……Rotorflex👍
@@torquedude Exactly right that is why I provided a theoretical drag coefficient
@@Andy-df5fj We are calculating pitch to miles an hour Not pitch speed Which is more of propeller tip speed calculation
Jeff guy is using an 03 air unit correct me if iam wrong hows he getting osd like whats on his video didnt think osd was like that
Wtf osd?
Excellent build ! Curious how you painted yours and was able to get the paint to stick to the foam. I have tried painting ATOMRC kits twice and it seems I cannot get the paint to adhere. Just eventually flakes off.
Thanks
@alcmann, I clean the surface I want to paint 2/3 times using isopropyl alcohol to remove the mold release agent. Make sure to change the cloth each time as the release agent sticks to the cloth. I also paint with Rustoleum aerosol as it takes well to the foam. Hope that helps and thanks for the comment….Rotor Flex
what kind of LED is that? I've never seen anything like that before
Hey davidwanj, they are BetaFPV Pavo Series COB LED Strip lights. Super flexible and stick on. Easy to use but you need to select what fixed colour you want as they are not RGB type.
What thickness was the carbon on the elevons? Is that thin carbon plate or just fabric glued down?
It carbon fibre weave material. If you plan on doing the same get your hands on the thinnest weave you can as it’s extremely strong when the finishing epoxy is added. If you haven’t worked with Carbon fibre check out a few tutorials on UA-cam before applying it to a model. I used a similar technique to fibreglassing and it turned out great…..Rotorflex👍
I like the clean bulding! Motor is still a FIVE33 2207 2070KV Champions Edition? What size of lipo do you use? 6S 1800 mAh? Thanks for your answer!
Hey henry3618, yes still using the FIVE33 2207 2070kv champ edition, great little motor so far and seems well built. I’m using different batteries such as custom build Molicel P45B 21700 (6s config) and I have an old 1500mah 6s lipo. I should really invest in a new lipo for this but hate paying the postage prices for lipos here in the uk. Molicel perform very well but still not as good as a high C rating lipo.
Oh and prop is 5x5
@@torquedude Thanks 👍🙂
@@torquedudewhat kind of prop? I’ve been looking at the max RPMs for APC props they are not rated at these rpms.
@@Oregonremote I use aero naut carbon probs but have recently switched to carbon speed by super for my version 3 testing. I have never had any issues with Carbon probs, only wooden props when there tips go supersonic. Thanks for the comment…Rotorflex👍
7 degrees f with grass like that?!? How?
That’s Ireland for you😂
Daft punk loves robot
I am surprised how stable your Dolphin flies at these speeds. Apart from your Elevon mod, do you have any other special settings in iNAV that make your Dolphin fly so smoothly? It would be nice if you could share yor settings.
I fly my Dolphin with a 6s 1400 battery, 2807 1500 KV motor with a 7" 4.5 prop. When I am high on the throttle my Dolphin bounces around and it does not feel very stable in horizon/acro mode.
CptPotti, skinning the Elevons made a massive difference to the top speed stability but another thing to consider is any external attachments creating turbulence and will definitely cause instability at high speeds. My inav settings are the same as what comes on the original atomrc 405 wing board and been copied across onto the speedybee 405 wing fc. I cant remember of the top of my head but I think atomrc add there own profiles to all their boards depending on what airframe you buy from them. The only thing I have done regarding the inav tuning is an auto tune but no PID’s adjusted from what came on the board. I can still give you a copy of the PID’s from my board if you want? Hope you get it flying nice at high speeds soon 👍
@@torquedude I bought the kit version of the Dolphin, so I don't have any AtomRC stock settings. So far I fly with the standard Inav settings + the PIDs after the autotune. I would be delighted if you would share the AtomRC settings with me. Maybe that will improve the flight characteristics a bit.
The Dolphin is my first RC airplane, so I still have a lot to learn. The only external attachment I have is my complete O3 air unit. However, I would like to keep the air unit outside, as cooling is otherwise very difficult. The bouncing only occurs in Acro / Horizon mode, in manual mode my Dolphin flies well even at high speeds. Since I mainly use my Dolphin for cruising, I want to get a good tune for the stabilized flight modes.
Isnt there a guy with a 12s dolphin doin like 180mph?
lmao challenge accepted! top speed of my 4s fixed wing sonic model 600mm is 122mph. avg speed 102 mph 4s
Hi. What is you auto launch speed set to. I want to build a 6s but don’t want torque roll during take off. Was thinking to set the launch to about 1700, idle at 1500. What are your settings. Thanks
Hey ttucker2073, it depends on a number of factors such as airframe weight, motor and propeller combo and battery size. If you are building a custom dolphin it’s best to configure the launch settings to suit your own airframe by holding it vertical and finding the sweet spot on the throttle where it just about wants to climb. Mr D - falling with style does a great video on the above technique. The auto launch for my build is 1750 but bare in mind my airframe is much lighter than standard with a high kv motor. Hope that helps. Thanks for the comment 👍
@@torquedude great thank you. I will be possibly using a cobra motor, think 2350kv or a t-motor 2600kv. So will be high kv and want to go 6s. But will normally fly 5s. Possibly 4s2p (p42) also for long slow flight.
😁👍👍
Nice one :)
Thanks kowalenzo 👍
I had to stop the video because the background music was too loud and chaotic for my old soul
Love me some Daft Punk 👍✌️🤟
@@jordancoleman2402 I'd bet you aren't epileptic either. So of us have to be very careful because flashing lights or some loud beats can trigger an episode.
Interesting enough, if it's lower volume it's less likely BUT if you turn the volume down, there goes hearing the narrator too
Bobjoatmon1993, thanks for your comment and I really appreciate the honest feedback. Moving forward as a creator I will definitely bare this in mind as I’d like the videos to be suitable for all my viewers. How did you find the video content minus the audio? I have just realised a new video on my channel ua-cam.com/video/UYusSp1CB6M/v-deo.htmlsi=iejrBQYbut5CVnHf please check it out as I took into consideration the audio this time. The video is some of my other Rc flying adventures and not the AtomRc dolphin challenge as I’m waiting on another AtomRC airframe arriving to build a faster V3 version. Stay tuned for more. Thanks again for the feedback. Rotor Flex👍
apposing directions and average the two thats how any major speed run is calculated
to take wind out of the equation
Stock af. Even better with the competing channels
Stock af 😂😂😂, totally stock 🤥. Thanks for the comment 👍
I'm going to build a dolphin as well, but on 8S. Makes much more sense than 6S, I think. (2x 18650 in series)
Would a tmotor f60 2020kv be a good
Choice or 6s? Occasionally 4s since i have so many. I have a brand new motor from a old race quad that needs a home.
Hey squirrelynutz1, TMotor’s are a fantastic motor and there F series are great. I run a set on my quad with zero issues. You will need to think about what size of prop/props you are going to use, especially if you are using different voltage battery packs. There is a great calculator online to match a suitable prop with motor kv and battery voltage www.mrd-rc.com/tutorials-tools-and-testing/useful-tools/propeller-speed-calculator/
No no ...Siete lenti😅😅 io con il mio Dolphin 6s 250kmh in piano .....record 289kmh l'ultimo video caricato 272kmh in picchiata FURIABUIA 😅🙋♂️🙋♂️🙋♂️🙋♂️🙋♂️🫡
Maybe you could make it a twin prop next?
Hey TheKeirsunishi, don’t worry I’ve got a few good speed modifications up my selves. Stay tuned for the next round of top speed runs! 🚀
@@torquedude Buzzing; I can't wait to see the first drone on UA-cam hit mach 1
these are all dive speed not flat out haha I got you on 4s i have top speed of 155 in a dive and osd to show on my youtube months back ahah
Stay down.normal5323, trust me you haven’t seen diving yet. Artificial horizon still in the osd. A nose down dive or a 45 degree drive the osd will go off screen on inav. You’re more than welcome to join but we are playing with dolphins at the moment. I have hot liners and nitro aircraft that would make my dolphin look like it’s parked! It’s about the airframe and how far the airframe can be pushed. You should definitely build a dolphin and join in, the more the merrier…..Rotorflex👍
@@torquedude i just might its been a few months since I built a rig. I have too many but all are 4s from 600mm ,688mm,900mm,1.1m 7feet the opterra. I have a good motor prop combo I would like to put on one and a few tricks
@@staydown.normal5323 that would be cool buddy. I know the feeling having to many rigs but we only live once so definitely go for it. I have just finished building my version 3 dolphin and will be attempting to break the 190mph mark. Wish me luck and keep an eye out for the video coming soon of the build and top speed runs. If you need any info on my dolphin mods just let me know, would be happy to help another speed enthusiast out……cheers, Rotorflex👍
Sorry but you are not the fastest anymore - ua-cam.com/video/b9csA64XIdw/v-deo.html
Jeff, congratulations on your top speed video and draw with myself. I think things are about to get interesting. Great video by the way👍
You’re not testing the true speed of the actual aircraft if you’re diving, anything can dive and go faster and from any height can get more speed. Yes, it’s a fast plane or wing whatever you wanna call it. The only thing was that suck about wings is there stability is shit.
Dubstep sucks!