JSB Exact Jumbo Beast .22 33.956 grains Grouping and Ballistic Coefficient, HW100 FAC 48 Joules
Вставка
- Опубліковано 3 жов 2024
- JSB Exact Jumbo Beast 5,52mm 33.956 grains
Weihrauch HW100 T FAC .22 48 Joules
Grouping and Ballistic Coefficient measured at a 50 yards indoor range.
Join this channel to get access to perks:
/ @unrelatedactivities
Enjoy it, share and subscribe.
Thanks for watching.
What a perfect setup! Thanks, mate, it's very usefull!
Glad it helped!
@@unrelatedactivitiesbuongiorno amico questi jsb Jumbo best riesce a girare il caricatore della bt65 ? Grazie
Como siempre, una excelente prueba, muy bien encarada en todos sus aspectos! Felicitaciones por el video!
Gracias Walter!!
33.95 Jumbo Exact bullets on the air rifle Hatsan Hercules 995 feet and 104 joules. This force is capable of killing a deer 100 yards away.
Excelente revisión. Los JSB Beast me parecen una muy buena alternativa para tiros a larga distancia, para no cambiar a calibre 6.35 mm. Felicitaciones!
Gracias! Necesitan mucha energía en el rifle de aire, pero son buenos plomos.
Awesome setup.
Thanks!
Excellent BC on them jsb beast pellets, I've used the JSB monster redesigned 25.39 and those have a BC around 0.042,and group excellent.
I haven't found the Monster Redesigned at the places I use to buy pellets, seems very promising.
What rifle are you shooting the JSB.22 monsters out of?
Thank you.
You're welcome!
Boa noite !! Minha gunpower sss agrupa muito bem com esse chumbo e consigo acertar alvos de 15x20 a uma distancia de 150 metros excelente chumbo recomendo para carabinas e rifles pcp de alta potencia!!
Tentei este chumbo na minha Kalibrgun cricket carbine e faz grupos razoavéis ate 50m.Mas para distancias longas,o chumbo destabilza muito!!
Também pesei estes mesmos chumbos e havia grandes diferenças nos pesos!!O chumbo preferido é o JSB 18.13gr🚀😎
Excellent informative video :) Perhaps you would like to try and measure the JSB Monsters Redesigned .22. They have the same shape and weigh 1.645 grams - a more suitable weight for the majority of .22 cal air rifles. For this they gain more and more popularity, even though they are still new to the market. I haven't seen any video reviews of them yet. Just ordered me a tin today and I'm pretty excited and can hardly wait to test them.
Thanks Alexander! They are not available at the shops where I usually buy pellets from, I have seen them available only in stores that don't ship pellets to Brazil (I will have to wait):(. I hope you get good results with the redesigned Monsters!
Although the HW100 loves the 18 gr pellet,it demonestrates great accuracy in the third group of 33 gr pellets.Great Job Antonio my friend
Thanks Eyad! It's not the best pellet for my HW100, but it would be good enough if it fitted in the magazine ... I think the second group was all my fault, it looks more like two groups, lol! I tested it with the BT65 also, but she didn't like it.
It usually loves the 15 gr ,mine in .22 loves the 15 gr jsb exact.
Mine has been having varied results with the 18gr JSBs and did not like the 15gr. I think it is related with pellet head sizes, and I intend to discover it if I find a good way to measure them.
Excelente vídeo!
Obrigado!
THX!!! what a job!!!!!!
Es muy difícil que ese pellett tan largo pueda ser estabilizado con los pasos de estría normales de aire comprimido, tendría que usarse pasos más cerrados, no se para que jsb comercializa ese engendro
Excellent job!
Thanks!!
а почему почти у всех пуль головка, как у гриба, а не острая, как у 7.62 например
Muy buen video amigo felicidades y siga así siempre
Gracias!
Excelente
Gran trabajo
Gracias!!
ah ok, so this way, polymer tip pellets like gamo red fire where predator polymag etc can be fired?!. the same with the HATSAN BT-65 elite?
Entran en la hatsan?en la hw no valen con el cargador?en calibres 25 los King heavy entran y van decentemente en las bt65,en 5.5 parecen muy largos,buen video
Grazas Batiste! O JSB Beast non encaixa no cargador, é moi longo para o cargador HW100 eo cargador BT65 .22, tiven que usar estes alicates... Os últimos tiros do video fixéronse co BT65 ( que non lle gustou a JSB Beast ).
Bel video,il pallino ogivale con le scanalature a sinistra del jumbo Exact che marca è?
Air guns just went nuke
Cool. If you have the audio recorder at 1000 meters and shoot at steel plate, you should hear the sound from the audio first before you hear the sound from the steel plate. Of course with an rifle caliber such as .223 and up, not air gun.
Would you not need to change the twist rate for heavier pellets or is it not like a real rifle? :)
I have increased the muzzle energy from 27 to 48 Joules (before, it had been adjusted for 14.66 grains Field Target Trophy pellets). Maybe the JSB Beast would perform better with some Joules more, but I don't want to mess with the regulator. Thinking about shooting real rifles and air rifles, the idea of "air guitars" came to my mind, lol!
If you stop the video at 6:44 under average energy I think it should be fpe not fps .
Denada amigo
Hola buenas tardes quisiera saber si me podes decir cual es la aplicacion que utilizas para las fotos de los grupos. muchas gracias
Hola, es el OnTarget Precision Calculator V1.11
hello Antonio
what regulator pressure are you running these 33 gr pellets?
thanks
Hi, I did not change the regulator pressure to shot them, so it should be near the original (maybe around 90~110 bar). The hammer spring tension was very high, though. You are welcome.
@@unrelatedactivities hi
I shot recently h@n 21 gr slugs .They are amazingly accurate .I raised the reg pressure to 130 bar but managed to get it run at 860 fps with the hammer tension to its maximum .I expected it to shoot around 900 with this setting !! I am not sure why it is ? !
So which one is better? No comment saying which is better? Sorry I am brand new to this air rifle world. Thx
Speed them up to at least 850/900fps
You should practice some more, those flyers are usual when hold is not consistent but this pellet show potential
You're right, the second group demonstrates what you said. I think what happened was this: the table top bends a little when I place my arms on it, particularly under the right elbow. As I had to stand up to load the pellet for each shot, probably my position changed a little for each shot. For the third group I tried to barely touch the table top with my right arm. Not sure, but could be that the cause.
Opa, você sabe me dizer o coeficiente balístico do JSB de 34 .22 a 1000 FPS?
Não sei, teoricamente deveria ser o mesmo do apresentado neste vídeo.
Vc acha que esse chumbo é bom pra nitro x 1000?
Creio que seja um tanto pesado.
A velocidade média da minha nitro é 305 m/s o gás dela é de 80 kg mesmo assim vc me indicaria outro?
Uma Dione Rossi,ele aclopa bem também.
I really like your videos. Very informative....creepy af tho hahaha
Thanks!!
Too much talking on this video!!!! :-) :-)
On a more serious note, they are huge!!!
Ship Việt nam?
how many fps would be throwing these pellets at hatsan bt65 in stock, the answer would be very useful, Thanks!!!
With 5 turns from minimum on the hammer spring screw, and without regulator it can reach 80 Joules (886 fps):
ua-cam.com/video/QJdgiab7ohE/v-deo.html
Airgun Shooting And Related Activities thanks for the information, I was trying to buy in .25 or in .22, but I decided for the 25cal, it is really powerful, much more than my bullboss .22, thanks for the video link
I am assuming these pellets, like most of the 'big' pellets will no fit in the mag of the Hatsan BT65?
Riccardo Rasberry no fit on the magazine, would need to put them one at a time
I used to get this with my HW100, it wouldn’t shoot straight no matter what pellet I tried, absolute rubbish in FAC.
ua-cam.com/video/UpmIweTPIBE/v-deo.html
Será q da dá na hatsan ht80?
Não sei, não conheço a HT80. Acredito que sim, porém ele é bem pesado (2,2g).
Vai só guspir do cano ht80 máximo 22 grens
Show! Poderia entrar em contato?
can you speak Chinese ? or you use translator ?
I have used Google Translator, hope it got it right...
@@unrelatedactivities I almost think you are learning Chinese~i got wrong,
i am the staff of DISCOVERY OPTICS in China, the translated sentences have some problems that make me a bit confused. Anyway
Do you know how to "custom drag model"? G1 or GA is not suitable for slug/bullet, I can't find out the correct BC for special slug .
I've never tried using Hawke Chairgun custom drag model, but I think one way to do it is to first create a table with
the POI at various distances to define the actual trajectory, then try to fit the model with the trajectory. Probably very time consuming.
esse chumbo da na at4410 ?
Acho que o espaço no magazine é idêntico ao da BT65, só carregando um a um direto no cano.
ok
so what's with the one that looks like a Phillips screwdriver head finding yourself needing to do a job but don't have the right tools or what looks worthless to me not a jab at you just at the pellet
Hades
5.5模具图纸
求
??
..look like a gamo pellets.
Непонял, а шо це за отрывы...!!! 🇺🇦
起码270+初速,这初速感觉低
谢谢!! 是的,我观察到我的Hatsan BT65:
ua-cam.com/video/kKhQ0RdVtnU/v-deo.html
ua-cam.com/video/X_LL4ot32RM/v-deo.html
si mal no recuerdo son los que empleo en mi 460 magnum target
Lol!!!