Alright people, I got it, didn’t use jack stands. Not everyone and their mom has to comment it, I obviously would have used them if they were available to me, calm down and stop getting your little panties in a bunch. And if you still comment it, well hey thanks for the view and the comment.
Hey guys I have a quick question I buy a kit for 2014 ram 4×4, same as yours but my is 2wd so I buy it wrong can I used it that 2014 2wd? Did you guys think is ok to used it, can you let me know if I can use it before I put it on my truck thanks
This vid convinced me to just crack open my wallet and have my mechanic level my truck as i sit home on the couch and watch more UA-cam vids of what he will be doing next on my truck for me.
man i got 37" tires iam hope this leveling kit work for my ram ...because the shop guys say i need to do 6" lift on the whole truck iam not paying no 2000 for a 6 inch lift ... we just gonna have to do some cutting and make it work
I saw someone asked about your exhaust. Did you say, you just removed the stock muffler all together? If not, what muffler are you using? Any issues with inspection or check engine lights?
Yup, just removed the stock muffler is all, and had pipe put in place of it to still exit out the rear. No check engine light or nothing, only thing you will for sure notice when deleting the muffler or getting a louder exhaust is the 4 cylinder mode gets drony, either you can live with it or delete it lol but I’d doesn’t effect anything at all with how the truck runs
Buddy if you would have pulled the nut for the cv axle it would have given you more room and less strain to push down the lower control arm . Good job thought
at what heights are the ball joint sitting after the leveling kit ? i've ordered the same one and i was wondering cause i've seen another video of a guy discouraging to install those as will worn out the ball joint super fast.. have you had any issue so far ? also since i will be installing the same one pretty soon do you have any suggestion about the installation ? thanks and great video !
As far as I know it didn’t change them that much, and as of now being on this since September my ball joints are still good, and as far as installing, really wasn’t that bad, just pretty much I had to damn near remove the entire sway bar cuz she didn’t wanna move, and you’re gonna need a LOT of force to put the strut back in, so either two people or a big ass bar to hold down the lower control arm. Let me know how it goes for ya! If you have any questions during, just DM on Instagram or something. Hope you like it! And thanks for watching!
@@bulletman4512 you're 100% correct. You can see the tire is tipped out, a new upper control arm that has angle compensation for a lift corrects that. They come in different angles depending on how much lift you go. Keeps the front tire flat on the ground.
Tire is tipping out because you change the camber when you install the kit and the kit and need an alignment to bring back camber. Going on year three with these control arms and they are still perfectly fine
Should have loosened the upper control arm bolts to make it easier on yourself to get it back together in the hub. I learned that the hard way on my ford. Not making that mistake on my Dodge.
Do the same thing that I did find your channel UA-cam brother I would sit here and text and explain it but it’s kind of silly you’ll see what I’m talking about once you do it it’s super easy though like I said
Over all are u happy with this kit does it ride good? I wanna get it but for 60 bucks it has my nervous like there’s a severe compromise made somewhere 😂
I haven’t had one issue with this kit yet, and I love it. Pretty solid, only thing you have to do is get it aligned. Otherwise everything works just as it should no issues, and I just checked all my ball joints and bearings and everything’s still solid
Do you like having those shiny chrome finish rims, or are you going to paint or plasti-dip them? Seems like I seen more ass in this video then the work being done, lmao.
carbuff81 I will never plastidip wheels I think it looks worse in my opinion, but that’s just me. I like either shiney/chrome or painted correctly black or whatever color
You are one of the few people that actually like the look of shiny chrome, most people I know cover up the chrome trim with black or carbon fiber. Now my Audi had gloss black/piano black trim on the windows and door pillars, they were fingerprint and scratch magnets, so I ordered stainless steel pillar posts and window trim that stick on right over the existing factory trim. Like yourself, I too prefer shiny/chrome/stainless steel over black.
carbuff81 oh I was just talking about wheels. Anything else I like black or color matched on the car. Actually is the reason I bought this specific truck is because it had color matched bumpers and grill. I don’t like chrome bumpers or accents at all. Those I prefer color matched. Only thing I absolutely love chrome on a vehicle is the wheels
My brothers 2018 Ram Laramie has chrome bumpers and chrome mirrors and a chrome grille, chrome rims too! There is a ton of chrome on the Laramie edition Dodge Ram. Will send you pictures of his on instagram. On my vehicle if I don't do chrome, I would prefer to do carbon over over a glossy black trim. I just don't like the factory pillars that comes on a car because once they scratch, you really can't fix it. So mine had a blemish, so I bought overlays to cover up the blemished area, lol.
@@Shooff3.4 don't worry if it falls on you it will happen so fast you won't even know what happened just hope it gets you quick and doesn't just crush you in a way that your there for hours crying for help
Alright people, I got it, didn’t use jack stands. Not everyone and their mom has to comment it, I obviously would have used them if they were available to me, calm down and stop getting your little panties in a bunch. And if you still comment it, well hey thanks for the view and the comment.
Shooff3.4 you are a moron
chronic hulk cool bro
Use jack stands
Hey guys I have a quick question I buy a kit for 2014 ram 4×4, same as yours but my is 2wd so I buy it wrong can I used it that 2014 2wd? Did you guys think is ok to used it, can you let me know if I can use it before I put it on my truck thanks
It’s soo nice to have buddies who lend a hand. Or get in your way.
Use jack stands I learned the hard way, jack gave out and had a 2007 suburban fall on me. Do not skip on using jack stands. Safety IS important
Whole lotta trust in that jack lol
Don't EVER work under a vehicle without jack stands dude...
This vid convinced me to just crack open my wallet and have my mechanic level my truck as i sit home on the couch and watch more UA-cam vids of what he will be doing next on my truck for me.
Yeah except now groceries and gas have doubled in price... LGB
Not that hard brother loosen the upper control arm bolts loosen the spindle nut and loosen the lower control arm bolts goes a lot easier
man i got 37" tires iam hope this leveling kit work for my ram ...because the shop guys say i need to do 6" lift on the whole truck iam not paying no 2000 for a 6 inch lift ... we just gonna have to do some cutting and make it work
Well other than the Jack stands,...you put the bolt for the lower control arm in backwards on the drinkers side. Nut goes towards the front.
Well done guys 👍👍
Me:Torque spec?
Them: Tight af
I saw someone asked about your exhaust. Did you say, you just removed the stock muffler all together? If not, what muffler are you using? Any issues with inspection or check engine lights?
Yup, just removed the stock muffler is all, and had pipe put in place of it to still exit out the rear. No check engine light or nothing, only thing you will for sure notice when deleting the muffler or getting a louder exhaust is the 4 cylinder mode gets drony, either you can live with it or delete it lol but I’d doesn’t effect anything at all with how the truck runs
Buddy if you would have pulled the nut for the cv axle it would have given you more room and less strain to push down the lower control arm . Good job thought
Was that the 2 inch level or the 2.5 inch?
at what heights are the ball joint sitting after the leveling kit ? i've ordered the same one and i was wondering cause i've seen another video of a guy discouraging to install those as will worn out the ball joint super fast.. have you had any issue so far ? also since i will be installing the same one pretty soon do you have any suggestion about the installation ? thanks and great video !
As far as I know it didn’t change them that much, and as of now being on this since September my ball joints are still good, and as far as installing, really wasn’t that bad, just pretty much I had to damn near remove the entire sway bar cuz she didn’t wanna move, and you’re gonna need a LOT of force to put the strut back in, so either two people or a big ass bar to hold down the lower control arm. Let me know how it goes for ya! If you have any questions during, just DM on Instagram or something. Hope you like it! And thanks for watching!
Alessandro DO.... NOT.... run this kit without new fitting control arms.
@@bulletman4512 you're 100% correct. You can see the tire is tipped out, a new upper control arm that has angle compensation for a lift corrects that. They come in different angles depending on how much lift you go. Keeps the front tire flat on the ground.
Tire is tipping out because you change the camber when you install the kit and the kit and need an alignment to bring back camber. Going on year three with these control arms and they are still perfectly fine
What size of spacer did you get ? Looking at doing mine but dint want to end up noise high and look stupid lol
How the upper control arms doing ? Thinking bout throwing the 2.5 on mine but in the debate of doing 2” because of the uca...
Till this day I still don’t have any issues or problems with the ucas
Shooff3.4 thanks bud
this is compatible with a Three Stooges movie
Should have loosened the upper control arm bolts to make it easier on yourself to get it back together in the hub. I learned that the hard way on my ford. Not making that mistake on my Dodge.
What size puck did you use 2 inch or 2.5
Just 2. Still had a minor rake to it
What size kit did you use
Looks good. Thinking about doing the same thing to my baby.
Ps you should Disable the seatbelt chime Super easy to do
How? Because it is super annoying I agree!
Do the same thing that I did find your channel UA-cam brother I would sit here and text and explain it but it’s kind of silly you’ll see what I’m talking about once you do it it’s super easy though like I said
Over all are u happy with this kit does it ride good? I wanna get it but for 60 bucks it has my nervous like there’s a severe compromise made somewhere 😂
Also did u have any issues wit the 4x4 axles being angered to much or any issues when the truck is in 4 wheel?
I haven’t had one issue with this kit yet, and I love it. Pretty solid, only thing you have to do is get it aligned. Otherwise everything works just as it should no issues, and I just checked all my ball joints and bearings and everything’s still solid
any alignment issues afterwards?
Just gained a very very small amount on positive camber
I would of replaced them with coil overs and be done, FOX shocks would of been done.
I know you act country but use jacks.
Loosen lower control arm bolts and nut
Remove spindle nut goes a lot easier
Link to the product?
good job but u guys need to use jack stands just saying
And Safety Glasses !!!
Don’t ruin your eyes 👀 !!!
Spring compressor would’ve saved you a lot of time
We didn't see you work on it to honest
Should have used a spring compressor, did not need to remove all the other items.. You made a big job out of what was really easy task.
Good way to to get injured or worse!!
Holy shit, you put your legs under a truck on just jacks, and no jack stands....
*first reaction* I hope no one dies! I should suggest jack stands and wheel chucks.
*reads pinned reply* well f**k me for caring....
The Bone!!!! Good creeper!
Dj Neese sure is!
Good job super crew lol
Do you like having those shiny chrome finish rims, or are you going to paint or plasti-dip them? Seems like I seen more ass in this video then the work being done, lmao.
carbuff81 I will never plastidip wheels I think it looks worse in my opinion, but that’s just me. I like either shiney/chrome or painted correctly black or whatever color
You are one of the few people that actually like the look of shiny chrome, most people I know cover up the chrome trim with black or carbon fiber. Now my Audi had gloss black/piano black trim on the windows and door pillars, they were fingerprint and scratch magnets, so I ordered stainless steel pillar posts and window trim that stick on right over the existing factory trim. Like yourself, I too prefer shiny/chrome/stainless steel over black.
carbuff81 oh I was just talking about wheels. Anything else I like black or color matched on the car. Actually is the reason I bought this specific truck is because it had color matched bumpers and grill. I don’t like chrome bumpers or accents at all. Those I prefer color matched. Only thing I absolutely love chrome on a vehicle is the wheels
My brothers 2018 Ram Laramie has chrome bumpers and chrome mirrors and a chrome grille, chrome rims too! There is a ton of chrome on the Laramie edition Dodge Ram. Will send you pictures of his on instagram. On my vehicle if I don't do chrome, I would prefer to do carbon over over a glossy black trim. I just don't like the factory pillars that comes on a car because once they scratch, you really can't fix it. So mine had a blemish, so I bought overlays to cover up the blemished area, lol.
carbuff81 I don’t mind the chrome rams, just think it looks more luxurious than sporty
You didn't show the work just posted the results
1:50 in and no jack stands I am out
North dakota shit lol
Jesus I'm half into the video and I'm out, isn't there an app for this s***
For christ sake use jack stands your trusting your life to a hydraulic seal
For Christ sake shut the hell up you act like you’re the first person to say that
@@Shooff3.4 don't worry if it falls on you it will happen so fast you won't even know what happened just hope it gets you quick and doesn't just crush you in a way that your there for hours crying for help
@@Shooff3.4 Gee you could have at least put your tire under the truck.😂
You didn't even reassemble it correctly...
Oh yeah? Been like that for a year and a half and she’s still working perfect no problems?
Improper use of government facility!,,
So unprofessional work
your quad cab made me unintall this video
What exhaust do you have ?
American Rifleman96 just a muffler delete