Dude, awesome! Waiting for my Sunray atm. My Dealer will do the lowering of the front for me (; I‘ll plastidip all silver/crome parts in black, wrap the pipe and add a grill to the frontlight. Tank will be bare metal with clear epoxy as protection 🙌
hey! greetings from malaysia :) i have a brixton 125 as well. and i've done pretty much custom myself. brixton 125 is quite famous in malaysia custom world. the seat that you made with the fiberglass is a absolute masterpiece ! i would really appreciate if you could make a review on it about the diameter and the idea of the build.
Same bike as mine, but yours looks way cooler now! Great job! Mine has trouble starting on occasion when cold, but not always. Sometimes takes 3 or 4 attempts to stop if from stalling after starting. Any ideas?! It can be fine for a week and bad the week after for a few days. Totally intermittent.
I had a same issue with my first bike (low-end brand) but turn out to be a battery problem - it basically depends on where you live in - Winters in Poland can be truly cold up to -20/30 C degrees and in this conditions it can be hard - my Brixton works perfectly sometimes I'm back after a 2 weeks trip because I travel a lot in my day job and it starts right away maybe it is your sparkplug these are the two most often issues in my opinion
Custom Guy thanks for swift reply! Spark plug is new. I thought it may be the temperature sensor in the engine, but too intermittent for that at a guess. Weather has been mild in the U.K. when it starts and dies again after a few seconds. I will check battery again. Keep up the good work anyway. 👍🏻
@@MrJmawiseman I would ask around or read about if it can be a "air humidity thing" I've spent some time there and I know that it can be an issue haha I'm not on that level yet but thanks for a good word!
Yeap I was pretty amazed with the outcome quality - there is one place where i know that I would do it better but it is not visible because its under the sit :) but overall yeah it looks like it would be done by a proffesional - and maybe it is because my friend painted it in the proffesional workshop for me :)
It is actually custom made - I found a company that is specializing in laser cutting - cut it out of the metal - chrome it and stick it to the tank with some 3M tape so a lot of small steps to make it happened
@@stephan7011 It was some random local company from Poland just type 'CNC laser cutting company name/branding/logotype' I basically sent a PSD project with measures and ask around 10 different companies for the pricing for just 2 pieces and pick the cheapest one because with such a small thing (and cheap service) like this I was sure that it won't look perfect and that's why I was sure that I'm going to paint it chrome anyway
I love the seat!
I ordert my Sunray today. Hopefully it will come in Feb. 2021.
Best regards from Germany, Ivo
thanks a lot!
Dude, awesome! Waiting for my Sunray atm. My Dealer will do the lowering of the front for me (;
I‘ll plastidip all silver/crome parts in black, wrap the pipe and add a grill to the frontlight. Tank will be bare metal with clear epoxy as protection 🙌
sounds cool! you will have to sent me some pics when you will done it!
@@blackwoodYT absolutely! Thanks for the input
I am loving this bike. I think I have to buy one now and call you to help me with the customisations. Would you be up for it? Paid!
surely im open for it! haha wold be such a pleasure to do some project like this again!
Wow, Good Job👍🏼🏍
thanks mate!
Great video
hey! greetings from malaysia :) i have a brixton 125 as well. and i've done pretty much custom myself. brixton 125 is quite famous in malaysia custom world. the seat that you made with the fiberglass is a absolute masterpiece ! i would really appreciate if you could make a review on it about the diameter and the idea of the build.
Did you change the rear set(the gear shifter)?
Same bike as mine, but yours looks way cooler now! Great job! Mine has trouble starting on occasion when cold, but not always. Sometimes takes 3 or 4 attempts to stop if from stalling after starting. Any ideas?! It can be fine for a week and bad the week after for a few days. Totally intermittent.
I had a same issue with my first bike (low-end brand) but turn out to be a battery problem - it basically depends on where you live in - Winters in Poland can be truly cold up to -20/30 C degrees and in this conditions it can be hard - my Brixton works perfectly sometimes I'm back after a 2 weeks trip because I travel a lot in my day job and it starts right away maybe it is your sparkplug these are the two most often issues in my opinion
Custom Guy thanks for swift reply! Spark plug is new. I thought it may be the temperature sensor in the engine, but too intermittent for that at a guess. Weather has been mild in the U.K. when it starts and dies again after a few seconds. I will check battery again. Keep up the good work anyway. 👍🏻
@@MrJmawiseman I would ask around or read about if it can be a "air humidity thing" I've spent some time there and I know that it can be an issue haha I'm not on that level yet but thanks for a good word!
@@blackwoodYT haha 😁
hello, where is the license plate holder from?
Cool Bike and cool Video - thanks for that! Are you happy with the build quality?
Yeap I was pretty amazed with the outcome quality - there is one place where i know that I would do it better but it is not visible because its under the sit :) but overall yeah it looks like it would be done by a proffesional - and maybe it is because my friend painted it in the proffesional workshop for me :)
Where is the tank emblem from?
It is actually custom made - I found a company that is specializing in laser cutting - cut it out of the metal - chrome it and stick it to the tank with some 3M tape so a lot of small steps to make it happened
Thanks for the answer! Which company is it? Can you post a link? The price is pretty good for so much individual work...
@@stephan7011 It was some random local company from Poland just type 'CNC laser cutting company name/branding/logotype' I basically sent a PSD project with measures and ask around 10 different companies for the pricing for just 2 pieces and pick the cheapest one because with such a small thing (and cheap service) like this I was sure that it won't look perfect and that's why I was sure that I'm going to paint it chrome anyway
Custom Guy And would you be OK to send us the psd ? :)
how low did you lower the front clip?
do you know where i can buy a compatible luggage rack
here: www.brixton-motorcycles.com/parts/ it contains parts that are compatibile with all of the 125cc brixton bikes
hey brother nice review. I was looking at this bike before I purchased my Monkey bike.
nice bike and nice videos! gonna subscribe you for sure! Im starting my new project so there will be new bikes on my channel soon!
You just have it, for sell?
unfortunatelly i sold it!
🤘🏻👑🎶🙏
Tak długo myślałem czy kupić i się sprzedał. Szkoda!
Nie sprzedał się - aukcję ściągnąłem - wypolerowany stoi w salonie i jeszcze go dopieszczam ale dalej dostępny na sprzedaż! :D
Jak chcesz pogadać o motocyklu czy coś sie wiecej dowiedzieć to możemy się jakoś złapać przez Martynę :P
@@blackwoodYT Napisałem na Fb! :)
Sayangnya motor brixton tdk pakai kick starter
Unfortunatly it does not but have many other features!