Dodge Third Gen | Synergy Track Bar Install Guide + First Impressions
Вставка
- Опубліковано 9 вер 2024
- I walk you through the installation of the synergy track bar for Dodge 3rd gen trucks. I believe the same unit works on some 4th gen models. this bar has polyurethane bushings and a threaded sleeve that lets you adjust the length without uninstalling it. this will work on trucks with up to a 6 inch lift. I believe mine is just leveled so mine is nearly at the bottom of the threads. The tools you need will vary but for my 2005 I needed an 18 mm half inch drive socket, and a 21 mm wrench for the nut on the other side. You will need a 19 mm wrench and socket to tighten the aluminum sleeve which bolts up near the frame. a really nice crowbar wouldn't hurt either because it just barely fits into the axle. of course this is intentional because you don't want that to move around...
Great tips! When instructions just aren't good enough!
It's called a flag nut