How to Change Rear Fog Light Bulb (Avant) - Audi RS6 A6 - C5 - 1997-2005 - TOTAL TECHNIK
Вставка
- Опубліковано 10 вер 2024
- This video will show you how to change your Rear Fog Light Bulb (Avant version) on your Audi A6, S6 or RS6 (C5) 1997-2005.
Looking for tools?
www.totaltechn...
USEFUL LINKS:
1) How to remove your Interior Tailgate Panel:
• How to Remove Rear Tai...
Video by TOTAL TECHNIK
Looking for tools?
www.totaltechnik.com/selectstore
Enjoy the video! BTW, in many countries your car will likely only have ONE fog light bulb, even though there are two housings (i.e. red sections) visible on the outside black handle panel. The second one is usually a dummy one with no hole!
Look carefully inside the bulb housing from the outside, and you'll see that one likely does not actually have a bulb inside. So that's why only one of your rear fog lights works ;-)
Actually yes, I'd think it was very possible to do. The same 12v feed could be taken across to the other side. It may be tricky to make the dummy housing secure the bulb properly, but if you had a spare donor panel you could cut out the socket and graft it on to the original panel.
I can't remember offhand if canbus checks the rear fog bulb on the RS6, but wiring in both MIGHT cause an issue in that regard. If it's a path to travel down I'd try adding a couple of wires to the existing bulb and run two bulbs at the time time (one just dangling next to the other to test) and see if it works and you get no warnings when you put the key in etc, if all good then go ahead and start making the housing etc to mount the bulb proper, and put in some tidy wiring.
Best of luck!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Please ensure you subscribe to our UA-cam channel.
2) Please give our video's the Thumbs Up on UA-cam.
3) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
4) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to your PayPal account and select the Send Money option and send any donations to: donate@totaltechnik.com
Thank you for your support!
Thank you for taking your time to show us
Glad you enjoyed the video :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
just bought an allroad, checking the lights I noticed that only one rear fog lamp was lighting up.(US car) the hatch rear trim was broken so I removed everything, because it is better to see the metal panels rather than broken plastic panels. this allroad only has a harness for one fog lamp. didn't they come with dual rear fog lamps???
thank you
Glad it was useful :-) www.paypal.me/totaltechnik
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
can help me on the right fog there is no such plastic but the metal inside I do not know how to remove it I tried with pliers it does not go can
Only one side usually has a bulb on these, as covered in the video.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Hello. How can I remove the number plate holder? is there a link for it? I want to remove the key lock barrel. thanks for your help
Hey there! Actually we have definitely filmed this, and it's due to be going up on to UA-cam over the next 4-5 videos scheduled I believe. So should be appearing here before too long!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
So what do i do if i have changed the bulb, and it still dont work?
Hey there! Next stage would be to check if the bulb holder is receiving a 12V signal ok using a multi-meter. If yes, likely both bulbs are bad or a dirty connection. If no, you'll need to trace it back to where the signal is dropping - maybe a corroded wire somewhere. It's a s tage by stage eliminatin process :-)
Best of luck!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Please ensure you subscribe to our UA-cam channel.
2) Please give our video's the Thumbs Up on UA-cam.
3) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
4) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to your PayPal account and select the Send Money option and send any donations to: donate@totaltechnik.com
Thank you for your support!
Hi can you make a video of how to remove the radiator on the rs6 c5?
Hey there! We will be producing a slam panel removal video for the RS6 soon, but not specifically a single radiator.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Please ensure you subscribe to our UA-cam channel.
2) Please give our video's the Thumbs Up on UA-cam.
3) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
4) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to your PayPal account and select the Send Money option and send any donations to: donate@totaltechnik.com
Thank you for your support!
Hi. But how to access second bulb?
Hey there! Actually in these units the second one is usually a dummy with no bulb. They put it there so it looks balanced, but in most cases you will find you cannot access the second one as it's a dummy and has no bulb. Hope that helps!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
I have a RS6 C5. It gives me lot of problems. Then there is power and other day feels like there is no turbos.
Yes, RS6 ownership can unfortunately be very expensive! But that's the price you pay to have a high end performance car unfortunately :-(
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
its an 2001, its supposed to be like that for that year. LMAO!
Yes, that's right :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
This dudes voice does NOT match his physical appearance! Hahahs
Thank you, I think :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!