Thank you so much for this tutorial! Quick question: After creating the pattern pieces, will I still need to add in seam allowances around the whole pattern? I wasn't sure if the seam allowances were already taken into account when first drafting.
Hey! Seam allowance needs to be added to the center front, center back, neckline and the princess line. No need to add seam allowance on the side seam and armhole.
@@JenniferAnidu The shoulder strap doesn’t go till the edge of the shoulders for a sleeveless blouse like this. Hence the 5.5” measurement instead of the regular half of the shoulder width measurement.
Amazing video, keep it up. Also if u dont mind, can you do a video of how to take measurements on an actual body, I'm new in the sewing stuff so I dont know how to do measurements on a body, it will be really helpful. Thank you.....
What are the measurements from shoulder to shoulder? I think having that piece of information omitted is really confusing me, because I'm working with a measurement of 11 inches from shoulder to shoulder and so if I draw a line of 5.5 inches, of which two inches of that is the shoulder strap, then the shoulder strap will be cutting into her neck. If you could clarify the shoulder-shoulder measurements, that will help. Also, how come you went down the back six inches in the step before drawing the bust line instead of the neck length? In the measurements for my dress, the neck to bust measurement is five inches and so how do I adjust the six-inch line in your video at the 1:12 mark to accommodate the measurements I took off my model? Lastly, how did you determine the lengths of the diagonal lines in your video?
Hi! I made the pattern yesterday. It came out perfect but i was curious about the straight line from shoulder for the arm hole. You measured it at 6” (1:09). Is that a standard measurement for 32 bust? Or calculated from something? For my pattern, i simply took 0.5” more than shoulder. Was i right?
Thank you very much, it is easy to understand even without someone talking and it is simple. I watched other video but your video made me understand it in a very easy way, thank you
Hi, I need to make a princess bodice for my grandchild. She is 11 years old; how do I know the length of the lines as I noted that you use your own measurements. Are there some areas I must know of except the body measurements?
Hey! Are you talking about the slant line I drew on the shoulder? It’s drawn because our shoulders are not straight. Draw a slant line 1cm down from the shoulder
Unfortunately, I don't understand where some numbers come from. it would be great if I knew where, for example, the 10" at 5:31 and then the 4" came from. where does this come from? And the first number of 5.5". And then +2" or +1". Why?
5.5" is half of shoulder width measurement. 1" at 1:32 is seam allowance. 1" at 1:48 is for ease. 1" at 2:05 is for seam allowance. 10" at 5:31 is to mark the apex point (shoulder to nipple).
At the back part u took 1/4of waist+1+1.. i can understand 1for seam allowance bt can't understand what for the other (+1)...so plz can u tell me the reason ❤
आप इतनी अच्छे तरिके से सिखाते हो और मेहनत करके इतनी अच्छी व्हिडिओ अपलोड करती हो लेकिन व्हिडिओ मे बॅकग्राऊंड म्युझिक मिक्स करके अपनेही हाथो से व्हिडिओ को खराब करती हो... क्या जरूरत और क्या समंध है आप जो बता रही हो और इस म्युझिक का? जायज है की आपका व्हिडिओ देखनेवाला कोई म्युझिक सूनने के लिए तो यह व्हिडिओ देख नही रहा, है ना? ज्यादातर युट्युबर्स अपने व्हिडिओ को आकर्षक बनाने की चक्कर मे म्युझिक मिक्स करते है लेकिन वह उलटा अपने व्हिडिओज को खराब कर रहे होते है.. यह बात पर कोई कॉमेंट मे नही करता, म्युझिक मिक्स है तो तुरंत व्हिडिओ बंद करके दुसरा व्हिडिओ देखता है...हेडसेट लगाकर देखते समय कानो को बहोत तखलीफ होती है और जो व्हिडिओ मे सिखाया है उसके तरफ ध्यान नही रहता है। इसके बाद आप जो ठीक समझे 🙏🏻 👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻 सिर्फ म्युझिक की वजह से...
Dear friend, thanks! Let know this truth to all youtubers those mixing music in thier video unnecessarily and those youtubers you have already subscribed and mixing music in video's. So write a comment... 🙏🏻👍🏻
Thank you so much for this tutorial! Quick question: After creating the pattern pieces, will I still need to add in seam allowances around the whole pattern? I wasn't sure if the seam allowances were already taken into account when first drafting.
Hey! Seam allowance needs to be added to the center front, center back, neckline and the princess line. No need to add seam allowance on the side seam and armhole.
@@BrownGirlDIYs Got it! Thanks again! ❤️
How 5.5 instead of the full shoulder measurement?
@@JenniferAnidu
The shoulder strap doesn’t go till the edge of the shoulders for a sleeveless blouse like this. Hence the 5.5” measurement instead of the regular half of the shoulder width measurement.
Blessings to you
If I’m cutting the center front on a fold do I still need to add a seam allowance?
Now it makes sense why we created a new hemline for the princess cut! Thank you for the detailed video.
Thanks now i understand princess line drafting
Learnin’ how to draft princess bodice and dancing at the same time! Happy New Year!
Haha! Happy New Year🥳♥️
Thank you is my first time trying this and understanding very well thans
That’s good to hear! Thank you❤️
Simple and easy, I will try to draft pattern for me
Very perfect way of explaining..
Kindly make more videos .
Ur way of explaining..this way is very gud...❤
Thank you❤️
❤❤❤very clear and precise
Thank you so much this tutorial is so easy to follow and understand ❤
Thank you! Glad to hear that❤️
Thanks ❤❤❤
😇😇👌👌👌
❤
Nice
Amazing video, keep it up.
Also if u dont mind, can you do a video of how to take measurements on an actual body, I'm new in the sewing stuff so I dont know how to do measurements on a body, it will be really helpful. Thank you.....
Sure! Will make a video on it.
@@BrownGirlDIYs
Looking forward to it maam, thank you. 💜💜💜
Thank you , am trying out and will give feedback❤️
What are the measurements from shoulder to shoulder? I think having that piece of information omitted is really confusing me, because I'm working with a measurement of 11 inches from shoulder to shoulder and so if I draw a line of 5.5 inches, of which two inches of that is the shoulder strap, then the shoulder strap will be cutting into her neck. If you could clarify the shoulder-shoulder measurements, that will help. Also, how come you went down the back six inches in the step before drawing the bust line instead of the neck length? In the measurements for my dress, the neck to bust measurement is five inches and so how do I adjust the six-inch line in your video at the 1:12 mark to accommodate the measurements I took off my model? Lastly, how did you determine the lengths of the diagonal lines in your video?
Hi! I made the pattern yesterday. It came out perfect but i was curious about the straight line from shoulder for the arm hole. You measured it at 6” (1:09). Is that a standard measurement for 32 bust? Or calculated from something? For my pattern, i simply took 0.5” more than shoulder. Was i right?
Hey! This pattern is based on 32” bust size. On your body, measure from shoulder to armhole, that should give you the measurement.
Plzz make one tutorial on basic bodice pattern drafting
Okay👍🏽
Very very very 😘😘😘😘😘😘😘 osm dear
Thank you♥️
@@BrownGirlDIYs plz made by full princesse cut gown mam🥰🥰🥰
@@kanikaverma3699 okay👍🏽
Keep darts backside so that the dress will sit very correctly
Thank you very much, it is easy to understand even without someone talking and it is simple. I watched other video but your video made me understand it in a very easy way, thank you
Thank you! Happy to hear that❤️
Thank you so much for your video.
Thank you for watching♥️
Hi, I need to make a princess bodice for my grandchild. She is 11 years old; how do I know the length of the lines as I noted that you use your own measurements. Are there some areas I must know of except the body measurements?
❤thank u
Hi thanks for the tutorial. Do you have a video of you creating something with this pattern?
Yes! You can watch it here: ua-cam.com/video/OPAU0RlEbNs/v-deo.html
Hello how are you doing? Do you have custom pattern manufacturing service
It's clear and easy to understand. Thanks for making this video. Can you make a video on basic bodice with waist dart?
Okayy👍🏽👍🏽
Nice job👌🙏
Thank you❤️
Is this UK 10 size
Please also show how to draft bottom umbrella
After watching so mny of the diys pattern tutorials i landed here explained so well n understandable tysm ❤
So happy to hear that!❤️
Back neck width...?
I make one of this but its not good at the armhole is too loose😢 i dont know why i just follow the video but it turns out failed😢
I’m not sure I understand. How do I measure bodice length?
For bodice length, measure from neck to waist (or required length of top/bodice)
I want to learn sewing patterns from you.
More tutorials coming soon♥️
42and44 best
Hi, just one doubt…in this video while making the pattern,you have never mentioned the front neck depth. Can i know the reason please
Can you say it what is for the measurements and the lines your making? I want to hear what is that for 7:31 than reading it
Hey! Are you talking about the slant line I drew on the shoulder? It’s drawn because our shoulders are not straight. Draw a slant line 1cm down from the shoulder
Hello, please upload more pattern making videos....
Sure! Will do
Please explain cutting in fabric and how to stitch pricess blouse
Hey! You can watch it here: ua-cam.com/video/OPAU0RlEbNs/v-deo.html
34/36 cutting plz
Ma'am where is back dart ?
Hey! It’s a dartless pattern
What sheet you use for pattern making ?
Hey! Here i have used A3 size drawing sheet. You can use any paper
How to CORSET pattern making
Will make a tutorial on it soon!
44 beden ..patrone plase ölçüler kalıp yaparmisiniz .!?🥰
Bhai kuchh bologe nhi to kaise samjh aayega
Excellent
Thank you♥️
Unfortunately, I don't understand where some numbers come from. it would be great if I knew where, for example, the 10" at 5:31 and then the 4" came from. where does this come from? And the first number of 5.5". And then +2" or +1". Why?
5.5" is half of shoulder width measurement. 1" at 1:32 is seam allowance. 1" at 1:48 is for ease. 1" at 2:05 is for seam allowance. 10" at 5:31 is to mark the apex point (shoulder to nipple).
@@BrownGirlDIYs ahh thank you so much!
How come the back doesn’t have dart
Hey! It’s a dartless pattern
Why there is no marking of shoulder slope at all ???
7:37
im sorry cant understand
Probably you don't know how to sewing
At the back part u took 1/4of waist+1+1.. i can understand 1for seam allowance bt can't understand what for the other (+1)...so plz can u tell me the reason ❤
Hey! 1” for ease and the other 1” for seam allowance
❤thnx
Unfortunately this worked disastrously when I tried it on a big bust gal. It's probably good for thin people though
I don't understand.
Not clear
Can you show us the result for using this pattern, please 🙏
Hey! You can watch it here ua-cam.com/video/OPAU0RlEbNs/v-deo.htmlsi=nPbWumWGsVQd60_M
به زبان فارسی هم بگذارید
आप इतनी अच्छे तरिके से सिखाते हो और मेहनत करके इतनी अच्छी व्हिडिओ अपलोड करती हो लेकिन व्हिडिओ मे बॅकग्राऊंड म्युझिक मिक्स करके अपनेही हाथो से व्हिडिओ को खराब करती हो... क्या जरूरत और क्या समंध है आप जो बता रही हो और इस म्युझिक का? जायज है की आपका व्हिडिओ देखनेवाला कोई म्युझिक सूनने के लिए तो यह व्हिडिओ देख नही रहा, है ना? ज्यादातर युट्युबर्स अपने व्हिडिओ को आकर्षक बनाने की चक्कर मे म्युझिक मिक्स करते है लेकिन वह उलटा अपने व्हिडिओज को खराब कर रहे होते है.. यह बात पर कोई कॉमेंट मे नही करता, म्युझिक मिक्स है तो तुरंत व्हिडिओ बंद करके दुसरा व्हिडिओ देखता है...हेडसेट लगाकर देखते समय कानो को बहोत तखलीफ होती है और जो व्हिडिओ मे सिखाया है उसके तरफ ध्यान नही रहता है। इसके बाद आप जो ठीक समझे 🙏🏻
👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻 सिर्फ म्युझिक की वजह से...
exactly
Dear friend, thanks!
Let know this truth to all youtubers those mixing music in thier video unnecessarily and those youtubers you have already subscribed and mixing music in video's. So write a comment... 🙏🏻👍🏻
Désolée je ne m’abonne pas je ne comprends rien dommage c,est du charabia, je vais m’abonnée aux chaînes qui ont une traduction au revoir..😮
Instructions could have been better
Hey very nice explanation. Do you have stitching tutorial for same
Hey! Thank you! You can watch the stitching tutorial here: ua-cam.com/video/OPAU0RlEbNs/v-deo.html