Basic guide to pre-made rebuildable coils | Kanthal vs Ni80 vs SS vs Titanium & my preferences.
Вставка
- Опубліковано 15 жов 2024
- In this review, it is all about pre-made rebuildable coils & how to choose the right one for you.
Kanthal wire: is ferritic iron-chromium-aluminium alloy with good resistance to oxidation, and commonly used for vaping in straight wattage mode. It is extremely popular as a primary wire when building single-wire coils.
Pros:Variable wattage. Easy to work with. Holds shape. Wide availability. Inexpensive. Not compatible with TC.
Nichrome:A wire well suited for wattage & is an alloy composed of nickel and chromium, and may also contain other metals such as iron. Nichrome comes in a variety of “grades”, with ni80 (80% nickel and 20% chromium) being the most popular. Nichrome behaves very much like Kanthal, but has a lower resistance and heats faster. It is easy to coil and holds its shape well when wicking.
Pros: Faster ramp than Kanthal. Easy to work. Holds shape.
Cons: Nickel content.
Stainless steel: SS is the most unique of the common vaping wires. It can pull double duty and be used for straight wattage vaping or temp control vaping. SS wire is an alloy composed primarily of chromium, nickel, and carbon, nickel content is usually around 10% or so, which is not that high, but people with allergies should not take the risk. For coil building, SS316L is by far the most commonly used grade, followed by SS317L. Other grades like 304 and 430 are also used sometimes.
Pros: Does double duty: VW or TC (with compatible mod) Faster ramp time than Kanthal. Easy to work. Holds shape. Nickel content (low)
Cons: Shouldn’t be dry burnt at high wattages.
Nickel: Also referred to as ni200, is generally pure nickel. Nickel wire was the first wire used in temperature control, and is the first wire in this list that cannot be used in wattage mode.
Pros: Does TC.
Cons: Hard to form Doesn’t hold shape.Nickel content
Titanium: The last wire we will look at is titanium, which is another TC-only wire, composed of pure titanium. There is some controversy surrounding the safety of titanium wire when used for vaping. Heating it can release a toxic component (titanium dioxide) above 1200 ℉ (648 ℃). Also, like magnesium, if titanium ignites it is extremely difficult to extinguish. Note that vapers still commonly use it, and theoretically if your TC mod is doing its job, you should never have to worry about combustion or titanium dioxide poisoning. It should go without saying, do not dry burn Ti wire!
Pros: Does TC. Easy to work. Holds shape.
Cons: Can be toxic. Fire risk. May be hard to find locally.
What is a Clapton coil: A standard Clapton coil is a thinner gauge wire tightly wrapped around a thicker gauge core. Claptons have a slower ramp up time than round wire builds, but are considered more flavorful due to their increased texture and surface area.
What is a fused Clapton coil: A fused Clapton is a thinner gauge wire wrapped around two or more thicker gauge cores. The multiple cores give FC's a faster ramp up time and arguably better flavor than non FC's , due to the increase in surface area. FC's come in an array of resistances for both MTL and DL vaping & are available in diameters and resistances for most modern build decks & generally have a faster ramp-up time than standard Claptons of the same resistance.
What is a staggered fused Clapton: A staggered FC is a thinner gauge wire wrapped around a dual Clapton core. The Claptonized cores and staggered outer wrap create additional texture and surface area. This gives it a slower ramp-up time, but an edge in terms of flavor over the standard fused Clapton. SFC's come in low resistances for direct lung vaping.
What is an Alien Clapton: Usually referred to as an alien, is a de-cored Clapton, wrapped around a multi-strand core. It is similar to a fused Clapton, except the outer wrap has a very distinct texture. Aliens have a slower ramp-up time than fused Claptons due to their larger surface area. Alien claptons come in low resistances for sub ohm vaping.
What is a staple coil: A staple coil is a thinner gauge strand tightly wrapped around a stack of typically 8-10 flat ribbon wires. This variation of the fused Clapton has a quicker ramp-up time due to the stacked ribbon cores. The tiny grooves in between the wraps trap e-juice and contribute to its enhanced flavor. Staple coils come in low resistances for direct lung vaping. Staples have a quicker ramp-up time than fused Claptons of the same resistance.
What is a framed staple coil: The framed staple is a cross between the staple and the fused clapton. It consists of stacked ribbon wire framed by round wire, fused together, or “Claptonized” by thinner round wire. The different cores create spaces within the wire which gives it better flavor than a standard staple and actually decrease ramp-up time. Framed staple coils are low in resistances for direct lung vaping. Framed staple coils have a quicker ramp up time than regular staple coils of the same resistance
This is absolutely a great knowledge session. When I searched the topic, I found a very few videos but this is a very detailed version. You're really a subject matter expert. Thank you.
Thanks Alok. Glad it was helpful
Nathan, I've been lucky to have found you along my personal vapeing journey ❤️
Glad to be helpful😊 thanks for your kind words
must say on a practicality and advice view this channel is miles ahead of what they were 6 years ago when i started. But ofc you can't know everything unless you try it out
@cj18. Thanks
Great info for beginners looking to get into rebuildables... i even learnt a few new things..
Very Informative mate..👍🇦🇺👌
Thanks Vape Traffic
Thinner wire ramps up quicker, but requires less watts and so when less watts applied the ramp up is slower. In addition the wick has a cooling effect but struggles to cool thicker coils at higher watts and so when you have a thick wire build and are running the required extra watts to get any vape this year it does seem to ramp up quicker.
One important thing is, using extreme thick wire coils is to give your wick a chance to cool as the wire it's self takes a longer time to cool.
You are correct that mtl builds are for low watts and slow ramp up and that dtl builds are for high wattage quick ramp up, but the wire is actually working against you in both cases. The ohms and the wattage comes to the reacue however.
Thanks Adrian for the useful info.
Thanks for the information Net Vaper, I learned something new today
Thanks Mark
Thank you for your hard work NET Vaper, this video would be really helpful for beginners.
for me I found SS316L 28guage 10 wraps spaced is still my go to with MTL builds, I had the perfect throat hit when I had my eXpromizer v4 on the Innokin Adept but when I swapped the Adpet with another mod (Cold Steel) the throat hit got less, tried multiple wattages including TC but still not close, if the Adept didn't have the issues it has I would stick to it but sadly for now I'm playing around with different coil builds hopefully I can find my sweet throat hit spot.
Thank you Yousif I hope you find your perfect setup but if you where happy with the SS316 coil in the eX V4 what issues did you have with the innokin Adept
@@netvaper apperantly the Adept is mainly made for the zlide/zennith tanks, so it would randomly start trying to detect the coil by itself, also because it has 2 types of settings (the 1ohm< and the >1ohm) if my build was let's say 0.9ohms after a couple of pulls it the ohmage number would change to above 1 ohm for example and that would turn off the mod for a second to detect the other wattages that come with the above 1ohm, so basically the mod would shut on and off on me randomly is what really made me go for a normal mod.
I'm really sorry if I wasn't clear enough with my explanation my mind is kind of foggy right now.
Got it now thanks Yousif
@@yousifyahya9885 geht a Flash e vapor and you are set up if you are all about a hard throat hit and still keeping really good taste
Really Great info! Always something to learn or remember whether beginner or experienced. Ive not seen a video on the subject that explained so much, so well. Cheers. I have a few rolls of all the various coil materials but have only ever used Kanthal 2.5-3mm 26,27,28g wire.
Thanks Aubery I learned myself whilst searching the subject.
Hello there!i was scroling through ure videos and i found this one.its a great video imo full of important notes for beginner vapers.me personal i use ka1 and ni80 for mtl.i found that in certain attys simple round wire a 26 awg works better than a complex coil.of course it subjective because some of us like a warm vapor some like a cooler vapor.but what i tend to use most is a simple 27 round wire.in my prime for me simple 26 or27 awg round wire work better than a fused mtl build,but on my old fev a fused mtl build was a must because the atty was a long one.i tend to find that a ka1 build gives me a better th than a ni80 wich has a mild th .but flavourwise if a attty is well made than u will have a great vape experience even with round wire.well i hope that i didnt bored other people with my opinions and i wish best and waitting for new videos from you
Thank you Emanual for your informative comment. On the contrary I do very much like reading comments like yours with information that can be useful to me & to others.
never had any issues dry firing SS316L didnt even know it could damage the coil.
i pulse at like 20% of the normal wattage but still fire it red.
@Azra Sashima. Thanks for your input
Just watched this as I'm a newbie. Great info brother. I have the tauren 1.5 and pandora v2 and looking at the bishop hopefully next week. I have round wire kanthal for rdl and ni80 claptons 4 mtl also from nature vape. Love this channel. Good job 👏
Thanks Dave. Welcome to the channel😊
Hi Mr NET great advice and help.I use 26g round wire as for your help to build are own coils which I am more than happy with.Keep up the good work take care Chat soon 👍🏻👍🏻
Thanks John
I like this topic. There are lot of posibilities by playing around with your coils. I usually use Ni80 because just like you said, it has faster ramp up so I can take a shorter puff and still get nice flavor. From my experience, thin gauge wire tends to boost sweetness while thick gauge decreases it but creates bolder flavor. It applies with round wires and prebuilds.
As for my favorite setup for now is Ni80 alien clapton with three 29 awg cores and 36 awg outer. Single coil, coil position a little above airhole, 0.39 ohm, playing at 40-43 watts. Mostly use DTL for creamy or creamy-fruity liquids.
Great review as always sir, I'm looking forward for this kind of topic in the future. It's kind of neverending because every person tastes differently. 😁
Thanks Aditya for you input. Like you I use alien coils on one of my RTA’s they are very good and last ages.
@@netvaper True, even at 3-4 weeks of use there's no degradation of flavor if cleaned and treated properly. 😃
@@PrdnAditya my personal favourite is a 4 core clapton 4x 28g nichrome wrapped in 38g nichrome, normally comes out between .25 and .3 for me on a single coil depending how many wraps I use, and it's a really nice warm flavourful vape in my billet box. If dual coiling an RDA I usually use 3x 28g nichrome wrapped in 38g nichrome which comes out around .2 ish for my hexohm and usually use my twisted messes pro RDA, though I have loads of different rdas to choose from I just tend to use the twisted messes more, with the dead rabbit V2 and the nitrous RDA being close seconds, the nitrous is a truly great RDA for single coils especially.
Great video as usual. Your channel is my go to when I need advice on vaping. I got a limitless plus RDTA which was a bargain at ten quid! When I start making my own coils, is plus ohm wire more geared to MTL? As my preference is DTL, BUT I think if anyone can answer this, you can. I am a big fan of NET liquids, so do you get a better flavor with MTL than DTL?
When it comes to NET’s the lower wattage allows you to taste the delicate nuances that where present in the tobacco leaf and transferred to the liquid during the process of extraction. High wattage DTL would deliver a general taste of tobacco but MTL on 14-18w delivers a cooler vape and you would taste the tobacco flavours much sharper & defined. but if you like it DTL that is no problem either. My suggestion try MTL on low wattage and decide which is better to your personal preference. For me personally it is Only MTL😊
Now I get it. My new coils arrived a few minutes ago, I wicked with a 0.8ohm coil, so I am guessing this is for MTL, but would 2 coils improve this, though this is delicous!
yes 0.8ohm is for MTL. i am not sure what you mean by "2 coils improving"
i just wanted to add that i love my vaporesso revenger for tc vaping with ss316l, setting tcr to 88-92(depending on how big chamber is, fev 92 tauren 90 kayfun 88). but it only works with spaced coils. currently using coilology fused clapton0.7Ohm(+1 turn to 0.85Ohm) and round wire(0.9Ohm) both 2,5mm diameter. successfully tested in kayfun lite 2021, tauren mtl and flash e vapor. very restricted mtl but fast and short inhale works but tested it also with slow long draw.
@fabrestervis. Thanks for your feedback
i still prefer 28g kanthal. easy to work with. few loops and im at 1ohm. ramps up well, battery lasts far longer than lower ohm builds. its also easy on juice consumption. very cost efficient imo.
@am game. Thanks for your feedback
As a newbie who never trying TC because I only know about wattage mode (honestly, I don't know if Centaurus M200 has it mode or no). But, in last 6 months of using it, I only use ni80 coil. I want to try Ti coil but I don't know is it safe as ni80 or not. Because many content creator says that Ti coil, isn't need to dry burn first, so after you build it in the deck, you can go directly to wicking steps. Could you give me suggestions to use coil to maximize the flavor and cloud? I only use cold liquid like Bequ, Minus Two, Tickets Xtra Ice, etc.
Sorry for my bad grammar 😅.
I only use Ni80 coils and it takes seconds to dry burn besides you want to know the coil is working properly before you put it all together
@@netvaper alright, Sir. So basically, Ti still not safe if we didn't know how to deal with it right? Now, just staying enjoy with Ni80 is the best choice if I don't want to take risks right?
@@Kurumi_PinkNekoo77 there is no risk with titanium coils but nickel coils can cause a reaction to those who are allergic to nickel. If you think you have an allergy to nickel use titanium or Kanthal or stainless steel I just use Ni80 which is 80% nickel & 20% chrom because they are good quality fused wire coils and easy to find everywhere
I’ve probably used the lot and nature vape 1ohm nicrm were a game changer for me
Yes Mark’s coil are excellent
Thank you for the great info!!
You are welcome😊
Hi Nathan, great review! Been trying to find reviews like this for weeks now lol.
May I know if you have tried the MTL ni80 Alien coil from Coilology? I just purchased one and it’s on it’s way.
Just want to know your opinion now vs 2yrs ago, if this kind of coil is suitable for MTL or just RDL. Most of my liquids are Tabacco and cream.
The RTAs I have are the Pioneer V1.5 and the Bishop. Decided to purchase these because of your reviews.
Many thanks! 😊
Hi Onins. Thanks. I use the Alien MTL 1.0ohm as well it is a good coil for any liquid including tobacco hybrids perfect for your Pioneer & Bishop
Great job done again, thank you! 👍🏽
Thanks System Booms.
Thank you for these fruitful informations🌳, usually I use mtl fused Clapton ni80 by vandy vape.
Thank you Marwan. Good choice of coil.
Hi very educational review thank you. I’m in the market for a portable AIO. What is the name of the little black AIO you demonstrated. Where would you recommend purchasing. Thank you for your great review on coil types.
Hi Michael. That was the Druga Narada Pro with the RBA deck full review link here ua-cam.com/video/H7RGPacdKVA/v-deo.html. These days you can buy much more modern AIO’s like the DotAIO and other RBA’s that I reviewed. Check out the AIO / RBA / Bridge playlist on the channel
Apologies. Another quick question. Core Clapton coils you recommend, what material and inner diameter? Thank you again
No problem Michael. It is 1.0ohm Ni80 2.5mm ID you can find it on naturevape website
Thank you for the review! I've just recently bough the Kayfun lite 24mm. But i'm not sure what coils to use with it? any recommendations? Many thanks
@Beat89. I mainly use with the Kayfun a pre-made core Clapton 1.0ohm by naturevape in the UK. It is definitely a recommended coil to use
Great! Thanks so much @@netvaper
Hey, what would be the best wire and way to wrap for sub-ohm DL?
I never made my own DTL coils I am quite happy with the pre-made variety
Hello, what do you think about this coil: Superfine MTL Fused Clapton wire ni 80, 30gaX2 + 38ga Vandy Vape, is it good for mtl?? Or you recomend another one from vandy vape, i cant find 26ga fused clapton
The higher the gauge the thinner wire so 30ga is very thin wire but certainly is good for a lower wattage MTL coil. I used Vandy Vape in the past they are good for MTL.
Here in Portugal i can only find 28ga kanthal A1 from vandy vape 🤦 26ga is rare.
Sad to say but since that ban problem almost everyone left vaping for IQOs, im trying to stay firm with vaping but we have not so many variety like UK , even la tabacheria , drakes and cabin juice i cant find nowhere, only black note, and comercial juices with added tobacco.
I only love tobaco juices xD
Is this pre-built coils same like your coils, is it good for MTL vaping on RIPLEY, BERSERKER V3, PIONEER V1.5?
VandyVape Super Fine MTL Fused Klepton Ni80 coils?
Yes and the VandyVape are Perfect MTL coils. Btw I also use mostly pre-build Ni8O core or fused clapton coils
@@netvaper Tnx a lot... I have another question about my next purchase, I wanna buy RIPLEY or PIONEER RTA MTL ATY, and which of this MOD's will be perfect for my new ATY:
1. Lost Vape Thelema Solo DNA100C
2. Yihi SXmini SL Class V2
3. Lost Vape Hyperion DNA100C?
Tnx a lot...
(I'm choose thus MOD's because they are aviable to buy in my lical store and country at all)...
@@balkanvaping you have expensive taste😊 all 3 mods are perfect but bare in mind MTL RTA’s need max 16-18w so the Thelema 200w is a bit of a over kill.
The Hyperion & SX mini are better suited for MTL. Both are excellent DNA chip Vs Yihi chip is a known argument😊
@@netvaper Tnx a lot. Then to go with YIHI SXMINI CLASS V2 MOD (Gunmetal) or some smaller MOD like:
1. Eleaf iStick PICO 2 75W
2. Thelema Solo non DNA 100W
3. VAPORESSO TARGET 100?
I'm just wanna ask you will be look nice this MTL RTA ATY on YIHI SXMINI CLASS V2 which have a big (30 or 28mm diameter) for the TANK. For my personal opinion, this is nice looking MOD for me too, but RIPLEY & PIONEER V1.5 are only 22mm, how will that looks on first sight??? Sorry for bothering you, but I really need a help because I'm new in this vaping world, and it goes well for me, I have Eleaf iStick Power 2 MOD and Berserker V3 MTL (BLACK color both) and is going fine, except sometime when I wanna refill my Berserker with other liquid (than is it in TANK) it leaks through both air hole downside... I'm learn to not do that, but also sometimes when I refill TANK with same NET liquid it leaks again through that two air holes downside. Maybe I put too many liquid in the TANK, and maybe I must wait some time, after refill it to start vaping... Sorry, but your opinion is worth a lot for me...
Thank you i learn a lot, is there any video about comparing premade coil that u use?
Im using freebase 9mg liquid, 12mg to strong troat hit for me
I still thinking to buy
Wotofo 0.62 or vandyvape 0.7, or maybe geekvape coil
Can you gave me advice?
Thank you sir
When it comes to pre-made coil there are 2 options. 1st option, mainstream companies like Wotofo & vandy vape & coilology etc. 2nd is specifically hand made coil made by a few coil makers. They are much more expensive and last longer. I personally buy mainly from naturevape or the mainstream companies mentioned that I happy with their performance & they last me for weeks, or I make my own from Kanthal round wire 26g 6-7 wrap at 0.8-1.0 ohm for my MTL RTA’s
Nice video ty for making this!
I have a question though. My tank has opposite posts so my coil needs to be different then most pre made coils. My coils legs cant be next to each other, but need to be facing out if u know what i mean. When looking at an 1 ohm mtl Clapton coil from nature vape, would u suggest giving it an extra half wrap so to speak or half a wrap less ? (Using neeko mtl rta) Also would u suggest the Ni80 or A1 kanthal version ?
Thank bryan. I always add a half rap so the ohms will go a bit higher rather then lower. Mind you adding a half rap does not always change any noticeable ohms read but if it does I want it to go upwards
@@netvaper i see. Thnx for the fast reply. Much appreciated !
@@SNELLExSLAK I find nichrome better flavour and faster ramp up being lower resistance for the same thickness of wire, which for me makes for a better mtl where you don't need to pre puff it it get it going as it heats up quick enough to just get a full drag off the bat with a high enough wattage. And don't worry about the ohms so much, people always aim for 1 ohm because of habit but it's not necessary, it's just from the mechanical mod days when most people preferred 1 ohm at unregulated voltages, but personally I build my mtl builds for mechanicals around .8 and with a variable wattage device it really doesn't matter as you can change the settings to suit the coil whatever the ohms may be. For reference I mix my mtl juices at 22mg freebase nicotine and usually set my mods to around 18 watts with a 26g nichrome coil around .7-.8 ohm.
@@MDM1992 interesting ty :)
thank you very much 👍🏻
You are welcome 🙏
I know this video is quite old but I'm hoping I'll get a reply. I recently purchased the Vandy Vape Pulse AIO V2 Kit & I've been struggling with what type of coil to buy. I want a good mtl coil & a good dtl coil. I'm looking for very flavourful coils that also produce nice clouds but will also fit onto the small build deck of the pulse aio v2s build deck.
I don’t know where you live. I buy all my coils from naturevape. His alien & core & fused Clapton MTL coils are the best. You need 2.5mm ID coils for MTL & 3mm for DTL
@@netvaper awesome. Have you tried any of vandy vape coils? And I live in the US currently in CA. Not sure if that seller sells to US or if not if you happen to have any US recommendations.
I was thinking of just going with a fused Clapton for my dtl or would core Clapton be wiser?
I recommend fused Clapton coil for DTL & for MTL use either. Any mainstream vape vendors have a good selection of coils. Vandy vape coils are as good as any other. Btw coilology sell a box called performance coil 7in1 3mm ID, 42 DTL coils of all types for very reasonable price worth checking.
Thank you for the time you put in very helpful 😊 can u use 2 zero point 1 coils in a mech mod
@zavalas butt cheeks r blu. On a mech, resistance is your power setting, except in reverse. The higher the resistance (higher ohms) the Mech delivers lower power the lower the resistance (lower ohms) the mech will deliver more power. The lowest ohms recommended is 0.2 ohm. If you are asking on a 2.01 ohm coil that will be a thin wire (high resistance / low power) therefore the power will be low 8-10w & very cool vape with not much vapour, also thinner wire will heat faster but cool quicker with airflow. Finding the right balance between wire gauge, resistance and airflow is key. I personally never use on a mech a coil higher them 1.0 ohm and no lower then 2.0ohm. It is very important to follow battery safety.
Excellent information, thankyou.
Thank you Frank.
i have the the brunhilde mtl and i dont know yet what are the best coils to use, can you tell me what type of wire i can use for it ???
If you buy Pre-made then I would suggest the 1.ohm core clapton coil fro Naturevape
@@netvaper okay , then what about super fine fused clapton mtl ni80 ?
I’m using the Brunhilde mtl with a kanthol fused Clapton coil...0.7 ohms....it’s a nice warm vape...
Is there a difference between Chinese wires and American wires like Twisited Messes or Kidney Puncher In flavour ?
I am not an expert on coil wire but honestly I doubt if you will notice any difference in flavour. Nowadays Chinese made is nearly all we use😊
@@netvaper Okay then thank you
Thank you - very informative
Thanks Jordi
For mtl: ni80 or ka1? 27 or 28 gauge? 2 or 2.5 id? THANK ❤
I prefer Ni80 2.5 ID as for the gauge I buy them ready made on naturevape and they are 28+38ga Core Clapton 1.0ohm
@@netvaperthank ❤
When we should replace the old KA1 into new KA1 at atomizer deck? Thank you 🙏
Well Vasily if you mean to ask when to change the coil the answer is either the flavour is not the best even after changing the cotton or if you see blacken liquid seeping out from the juice wells or if the coil looks brittle and oddly looking. Either one of the above it time to change the coil. I change every 4 weeks on average but I do clean my coil every time I re-wick
@@netvaper Thank you so much 🙏
i need suggestion please :
i want to vape at 8-10watts
mtl
tobacco and tobacco/with
prefer fast ramp
i need suggestion for both round wire and prebuild coils please
I use Kanthal round wire 26g 6-7 raps 2.5ID and for pre-build i use nature vape Core Clapton 1.0ohm MTL coils
@@netvaper kanthal what type? normal, clapton, fused clapton?
what about Ni80 should be faster? target watt is 8-10watts
@@omaremad1691 the Kanthal I use is a round wire. I prefer Ni80 core clapton or fused clapton I find them to be more flavourful. I am not into the ramp speed factor as I vape low wattage 14-16w it does not make a real difference
I don't know what I can do with mtl coil to use it for (rba coil *lost vape ultra boost regular rba not the pro* ) im soo worry about spend my money to trying a lot of tank to choose the best one or the best for me
i prefer to use "above one ohm" clapton coil
*I only vape tobacco flavors*
Rba can hold coil with :
2.5 mm diameter
5 mm width
Not sure what are you asking. Are you looking for a good quality MTL coil
@@netvaper
Asking for Best mtl coil to use with : rba coil
I highly recommend naturevape 1.0ohm 2.5mm core Clapton MTL coils. Suited for RTA & RBA’s.
Why not to dry burn Ss316l? Thanks
Stainless steel wire burns very hot and it is a delicate wire and can be damaged by overheat.
Hi Net Vaper what is you're everyday net juice that you use everyday , I would
I swap & change Mark but during the working hours I prefer Virginias and in the morning & evening bolder net’s. All the net’s I vape I reviewed and some more to come.
Hey sir, i want to buy wottofo mtl coils are they any good for flavour?
@Avon Barksdale. If you are asking on Wotofo rebuildable coils yes they are good for flavour
Thank you sir i always have faith in your opinion like for the ares 2 and pioneer tank's
Thanks enjoy them both
Can we use nichrome coil..?
@Chongshen Chang. Yes of course Ni80 is most popular coils. Nichrome comes in a variety of “grades”, with Ni80 (80% nickel and 20% chromium) being the most popular. In brief, Nichrome behaves very much like Kanthal, but has lower resistance and heats faster. It is easy to coil (for DIY) and holds its shape well when wicking. Nichrome has a lower melting temperature than Kanthal, so you need to be careful when dry burning your coils-they will burn open if you aren’t careful. Start low and pulse the coils. Don’t rush into it and hit them with max wattage while dry. One other possible downside of nichrome wire is the nickel content. Folks with nickel allergies may want to avoid using nichrome for obvious reasons.
Clapton for MTL is for higher wattage 16 watts to 20 watts
Thanks M K
I've never understood people's reservations with ni80, I've tried pretty much every wire out there and have always preferred nichrome to everything else, I find I just get far better flavour out of it and the lower resistance is a nice addition also. Whether I'm using large complex coils or 26g mtl coils I always prefer nichrome for some reason and have never had/noticed any negative effects from using it.
@MDM. On the contrary most do use Ni80 coils including me only those who are allergic to nickel as Ni80 is 80% nickel and 20% chromium use Kanthal or Stainless steel.
Thank you.
Thanks Amir
I have a true mouth to lung tank, it's great but I wish they would make a stainless steel part where the glass is because my glass tank is always breaking on me and with the metal tank I can always taste when i need a refill,
And Thanks for always responding to me net vapor
Do you mean EHpro true tank
@@netvaper yes that's the one
A V2 of the true tank is coming soon.
@@netvaper when it does I want to get one cause I have the true by eh pro and I have a mini berserker, and they both work great but the true is easier to wick to me because it's a gt type where the mini berserker I have to tuck the cotton in to the small holes but the mini berserker has an all steel tank where the glass usually goes or it can take glass to but I use the metal because I always drop them sooner or later lol, I have a kayfun but the very 1st one they made and I have to take the screw out to fill it so i cleaned it out and put it away but I had also a kangertech tank to after the kafun but on its smallest holes it's still a loose mouth to lung but I would also like to get the new innokin that pbesardo and Dimitri I guess worked with inokin to make, i hear it's a real mouth to lung with a gt style deck to build on, Thanks Net Vapor
I am impressed with your efforts getting your ideal vape setup. I reviewed the innokin Ares V2 very good & easy to live with RTA
I find 26 is not as good as 28, great video
Noted. Thanks M K
You're in a minority there, the vast majority prefer 26g, I personally prefer 25g myself but it's extremely hard to find.
I'm allergic to nickel I never knew until I started vaping 10 years ago although at first for maybe the first 5 years always used K1 but boy what a bad experience I had after using Ni80 and the thing is I never knew what was causing the problem for over 3 months never again I would rather dry hit on mesh everyday for the 3 months than go through what I went through
Very interesting. I gathered by reading your comment the allergic reaction to nickel was severe. Lucky you found the culprit
I’m allergic to nickel too. Also the aluminium coils made me feel sick. I’ve been making titanium coils for a few years and they have been working very well for me but it’s getting harder and harder to find titanium wire so I’m thinking I might need to try stainless steel. Bit scared to be honest!
@@moniquem783 titanium is mostly for temp control and it's far from the best temp control wire so didn't really sell that well, now stainless steel and nife and ni200 are the temp control go to, I never actually tried titanium wire myself even when people used it more it was always hard to get your hands on and I heard from others it was extremely springy and hard to make coils with for that reason.
@@MDM1992 I never really had any issues making titanium coils. I wasn’t doing anything fancy though. Just 9 wraps, flip it and straighten the end I was holding. Did the trick. I have pretty much switched to stainless steel now. It’s okay. Tastes vile for about the first 40 hits so I now sit here pushing the fire button and wasting juice until that settles so I don’t have to taste it. Other than that it’s fine though. I didn’t react to the small amount of nickel in it. I have kept a little stash of titanium wire for in case I have a flare up of my regular symptoms which could make me more sensitive to that little bit of nickel, and if I’m buying anything from a vape shop I always check if they have titanium and if they do I grab it, but it is very nice to no longer be worried that I won’t be able to get what I need and to not keep coils in far too long in an effort to ration my wire. I will never try the higher nickel content wires though. I don’t care if they’re considered better vaping, I only do this to get my nicotine without smoking. As long as it tastes okay and has the level of throat hit I like them I’m happy. I’m not chasing clouds or flavours or anything like that.
@@PS-cq3lq with earrings. Every time I wore earrings my ear lobes would get red hot and really painful. I have lots of issues with metals, but am still coping with stainless steel coils. I’ve now learned to dry fire them so I don’t have to taste that vile-ness.
The best coil is the handmade ni80 aliens for dl and mtl
Indeed Ayad I use the pre-made coilology 1.0ohm MTL Alien & naturevape 0.32ohm Alien for DTL both are very good coils.
ive vaped mesh RTAs for over 3 years now and ive never had a dry hit in my life. People just don't know how to wick them!
@SNOBYMILLS yes i agree.
Lol this guy had to stop mid sentence an say one minute I just need a vape. Like it was a fart or something lmao
😂
For me SS 316 28ga .
Thanks for the feedback
nickel is a water soluble toxic metal. I am shocked it is used in vaping; especially a could that's 80% nickel.
I am more shocked how can someone inhale smoke into his lungs😊 seriously though the absolute minute if any metal particles enter the liquid when vaporising as the coil does not burn red hot it is nearly heating up the liquid causing vapour but never reaching the temperature in which any metal particles can be separated from the wire. There are tons of chemicals in each burning cigarette that is way more harmful when inhaled
If I take a nickel wire or a nickel coil and get it wet it will dissolve?