2014 Camaro Quarter Panel Replacement Pt.1
Вставка
- Опубліковано 11 вер 2024
- Replacing the quarter panel on a 2014 Chevy Camaro... I hope you like the video don't forget to leave some feedback and subscribe for the finished product.
#CamaroQuarterRemoval
As someone who’s not a mechanic or nowhere in this field, 5/10. (10/10)
As a professional technician that has been doing this for over 20 years is that youngster did a pretty good job as he continues to do this profession he will learn to do it faster and less cutting and welding at his sectioning points he only needed to have 2 sectioning points not three and I highly recommend not to glue panels I know 3M backs it up but I usually you want to weld your vertical areas like at the b-pillar and around the quarter glass and back glass preferably with a pro-spot machine if the shop doesn't have one then yes a mig-welder will work that's just the way I would have done it but overall not bad for a youngster good job keep up the good work!!!👍
Thanks brother , appreciate the positive feedback 😀
I love this video. I too, learned from my Dad and work as a body man. It’s refreshing to see other young men doing the same work. Keep it up man.
Nice!! Pops knows best lol it can be tough working with your dad but at the end of the day they mean the best for us 🙏 thanks for watching 😃
Yeah, me 3. lol l'm42 he is 70 and we just quit this year. But are going to do personal cars and flip some. But the bodywork beat is over. Good luck, great video. You did a nice job imo.
All I can say at the moment is Awesome job, and usually I cannot tolerate music or background noises but in your case for this one, it was nice mild and not annoying at all. Keep up the good work.
Thank You bro , I appreciate it
Thanks for doing such a good job editing. I was going to buy a 2012 SS camaro with the exact same damage, thinking it be a couple of weekends and a couple of welds to cut and bolts on the rest. I was going to do it in my garage but clearly you need alot of equipment and tools. The car would sit for 10 years before I got it done.
Thanatos for watching , glad you found this helpful
Just a couple critiques. A good spot weld cutter will work much better than grinding them. It will cut them out cleanly and uniformly, making it much easier to pull the panel. The less you have to yank and twist, the less you are deforming the structure underneath. And, at least in my opinion, a sawzall has little to no place in a body shop. Use an air saw. It has a MUCH faster and shorter stroke, and can be controlled with near surgical precision.
ua-cam.com/video/I3X9t5GSDRM/v-deo.html
Where did you get the replacement quarter panel? The only ones I can find are either the entire side of the car (from Classic Industries) or they are much shorter going up the pillars.
I love those jack stands!! Those would make me feel much safer!
For sure , and they're very handy when trying to work all in the wheel well
Imagine you forgot to pull the e brake
Your dad taught you well,all the techniques you do are I-carr certified procedures.
Filiberto Barrera Thanks brother he's a certified tech, he's been to multiple Icar classes over his lifetime and I'm lucky enough to have him share his knowledge with me
My pops also passed some knowledge before I move on to dealerships and production shops. I now own my shop with the knowledge and experience i have gained over the past 12 yrs. I do my own thing and enjoy helping people, moral here is keep at it and if u want it as if you need it you can attain it.
Oh WOW!!!! This was awesome!!!!!!!
Thank you I’m glad you enjoyed the video
awesome videos brother!
Thanks bro! I’m glad you enjoyed the videos!
Que calidad d trabajo ..Aprendan los envidiosos eso no tiene otro nombre q ESPECIAL TRABAJO
Gracias 😁 me da gusto que le gusto El video
Great Job !! Your dad did a great job teaching u! Got yourself a New Sub Brother!
Thanks man I'm glad you like the content
Do the replacement panel have spot welds and channel that for a lack of better terminology panel lines up or has reference point to give idea on placement, also if I were to put the trunk lid back on wouldn’t that be a better way to get gaps/ alignment, I’ve changed front ends etc at 16yrs old so I’ve got 37yrs working experience I’ve just never replaced rear quarters.
I appreciate your videos,Thank you
Lol I wish brother, you have to prefit and align it yourself, you have to remove and install the trunk to get the gaps right, thanks for watching I'm glad you're enjoying the channel
Não precisa demorar tanto. É só cortar perto de onde vai fazer a emenda da solda com a Mig ou cola 3M. riscar as duas chapas e cortar ajustar e soldar. Deste aí , faço 3,ou mais por dia.🏚🚘🙄😎
I find it better to drill the tack welds off first and then cut. But great video
Most body shop drill hole and pull
The dent out hammer the spot are out to much then Bondo it but you did
Good job it fix good that quarter panel is after market
That chisel is no joke. Nice one!
br1an419 lol they'll cut thru metal like butter
Nice work bro, I’m thinking about doing my drivers side on my 2010 model. But I’ve never done anything this intense. I’m a little intimidated
Anything is possible, keep in mind I have all the tools needed and 10 years doing this
GOOD JOB THERE ARE MANY WAYS TO DO THIS YOU HAVE UR WAY AND IT LOOKS GREAT .IVE SEEN SOME JAKED UP WORK IN MY DAYS BELIEVE ME LOL GOOD JOB 👍 COULD USE A GUY LIKE U IN MY SHOP!!!
Thanks brother and honestly I had just bought that sawzall and you know when you get a new tool you want to use it everywhere and plus the panel is getting replaced so why do I need to take it out like I'm going to use it again
Auto Wizard lol I know what u mean with new tools I love new tools.But for shur u do some good work much respect ✊
Thanks, I'm glad you enjoyed the video I'm trying to get more consistent with my uploading and having quality content with voice overs and all stay tuned brother 😀
Good job young man!!
Thank you brother! 🤙
Was curious how you get the quarter window off, I’m replacing mine
You need a set of different tools we have a glad company that does that for us
What shop is this need this done to mine
Im from Houston
Nice job bro! l've worked with my dad for about 3 decades. l don't know how old you are but you are doing very well. My best advice to fixing any wreck is pull and hammer and get the areas where fenders bolt on etc. as close as possible before moving on. lt's much easier to spend the day getting things right than pulling your hair out all day cheating to make up for a hack job and it will show in the end no doubt. There is so much more to all of this than people may think and it's not over until the paint comes out well.... idk that l'm going to miss the hustle. l like the work but not the money or deadlines. Good luck young man! Your patients and learning ability along with respect for your father have already gotten you further than most guys l have met who have been in the biz all their lives.
Thanks bro means a lot ! ☺️ it can be tough at times working with your pops , things can get pretty heated . It’s been a good five years can’t complain he’s taught me a lot and like anything else I continue to learn . Thanks for the tip I’ll keep that in mind, i agree so much work and detail to get a final product but once you see it back to normal it’s almost unbelievable, especially the bigger the hit 👍 I understand, at times I wonder if the hustle is even worth it at times 🤔 got a bunch of older wiser techs that have been doing this since I was a baby telling me if I’m sure I want to do this and that there is still time to do something else
Where i can find this quarter panel for my chevrolet aveo 2007 ?
We usually buy our original manufacturer parts from other dealerships and we also sometimes buy from junk yards !
Goonzquad needs that cutting tool
It's a great tool slices through metal like butter any kind of metal 🤘
How did you remove the quarter glass and rear window?
We call a glass company out
When cutting off the quarter panel, how do you know where to cut? When you masked off the section of the panel 3:17
Dedric Blowe that’s the first initial cut , I’m basically removing as much of the old quarter panel off I look at my new part and cut way below then I overlap my new quarter with the roof rail then cut again to get a even section .
What do you use to cut and how could we set something up? I have the parts and what not...just dont know how to do any of this
I use a sawzall that I bought from Home Depot , an air hammer some grinders. You just need a garage with a capable compressor . There isn’t much to it , your cutting out an old or damaged part and putting a new one back on. I have another video on replacing or quarter panel where I do a voice over maybe that can help some too
I will watch it for sure. I know nothing about welding, cutting, or bondo ...just learned what all that was yesterday ...
Auto Wizard which type of welding technique are you using when you are welding in the quarter panel? Looking at my cars rear body in (inside the trunk) I see that it was welded and place together by some white material, do you know what that is?
Great video question did u make that stand to hold vehicle up in place of wheel
It's a universal wheel stand allows the car to be dropped back down and mimic the wheel being on there a keep the cars regular stance and be able to work in it
Did u fix old quarter panel or took it off from another car?
New OEM panel
Where you buy the panel from? I need the driver side of my car
We usually buy them from other dealerships who have them in stock
𝑶𝒉 𝒐𝒌 𝒂𝒓𝒆 𝒚𝒐𝒖 𝒍𝒐𝒄𝒂𝒕𝒆𝒅 𝒊𝒏 𝑳𝒐𝒔 𝒂𝒏𝒈𝒆𝒍𝒆𝒔?
Hello I was wondering where did you buy that rear quarter panel? Thank you
Jovany Garcia ya me to do you know
Good I can follow a video on mute while reading written procedure below a video and concetrate more on a nice job!
Thanks 🙏 I’m glad you enjoyed the video
Hey what is that jack stand called. Like is it called something specific?
I believe it's a universal wheel stand by chief
Yea I screenshoted that was cool
Where did you get quarter panel I need to buy one
We have a parts department that does that for us
Hey I stay close to Houston
I have the same exact problem on mines
Except the door part
How much would you charge
Where to find a 2013 Camro rear quarter panel
Go to the dealership and their parts department can get them ordered for you
Me gustó tu excelente trabajo apoyando mi canal.
Muchas Gracias Amigo
how much would you charge someone to fix a quarter panel and a door panel ?
Depends , how much the parts cost and how bad the accident is. Hard to give a price without looking at the car
@@AutoWizard94if it was the same amount of damage as the car in this video about how much would you have charged?
👍👍👍
Good job
Hey man. Just had a very similar accident in my Camaro. Did this total that car at the time?
That sucks to hear bro , but this repair didn't total the car when I was doing it
Auto Wizard oh good to hear. Hopefully it’s the same with me.
@@Sameres123 I don't think it should the car is pretty new
Is it just me or is a lot of undamaged panel being removed ? Couldn't just the damaged section be removed and then a patch panel be used ? I'm not a pro body man so maybe I'm wrong, but all the the way up that sail panel ? Seems excessive..
dennis jump no because that wouldn’t be a proper repair, it would take longer to do and also to get the patch covered with bondo/filler would be killer. Trust me its not as bad as it seems changing the whole panel would make the car look like nothing happened if done correctly
Just cutting out the area and patching it would take more welding and filler to smooth the warped metal from welding the patched area I would have only have section 2 areas not three that's less welding and filler
Good job! u got it done. Many ways to skin a cat, you will find your groove n with time experience will come also.
Thank you brother appreciate the positive feedback, honestly I had just purchased that sawzall and just wanted to try it out. Stay tuned for more , I'll keep refining my videos as I move forward
Great video. What are all the tools you used??
Thanx
Which ones?
@@AutoWizard94 Basically almost all of them!
@@elijahkyallo4996 lol
Cut off wheel
Angle die grinder
Belt Sander
Sawzall
Orbital sander
Air Hammer
Yea that’s why I put concrete in my quarter panels because they are a pain to fix
😂😂😂 hella of a lot easier
Where did u purchase your quarter panel from ?
We get our parts from dealerships all around whoever has a better deal
I’m in Houston can you replace mines ?$$$
Amator ?
Бред какой то!Артур бы вытянул это крыло спокойно!
I don't understand friend, sorry.
Eugeny told about Artur Tussik. Hi is car repairer from Lietuva. Visit to his youtube channel, please. It's very useful car repair resource.
@@CPCI_Entwickler ua-cam.com/video/I3X9t5GSDRM/v-deo.html
@@AutoWizard94 ua-cam.com/video/I3X9t5GSDRM/v-deo.html
This is more like how the manufacturer recommends repairing damage. Arthur uses some procedures that wouldn't be insurance or manufacturer approved.
Na luzie dalo sie to wyprowadzic bez wycinania i takiej ingerencji
GJ. Looking forward for part 2. When it's going to be uploaded?
Antonín Bláha Hey brother thanks for watching my videos , I'm looking to have the video up in a week or so
I hate cutting in pieces. By the time I sit there and air hammer around everything I could grind ALL the weld sand slip it right off.
Luis Paniagua I’ve never really tried just cutting the spot welds , I was taught to just cut everything in the way I’m gonna try that
I take it you are not flat rate?
Cutting out holes with air hammer is a waste of time. Put a 1/2in thick cutoff wheel on your cutoff wheel and grind the spot welds down then go around with your seam buster to pop it off. I heat up any glued areas with a propane torch to soften it. Weld thru primer already ground down spot weld areas, pull out the pro spot and spot weld away...silicone bronze section areas or mig whatever it calls for. Quarter pays what 16hrs why waste 2hrs cutting little pieces out with a air hammer.
the panel was fixable , why he changed it?
Теперь не бита,не крашена и без пробега по СНГ)))
too much work for something you do not have to replace
Це просто провал. Я б таким механікам не дав і лампочку поміняти в задньому стоп сигналі
Где этот сервис с дебилами находится интересно. Что он мучается сразу новый кузов заказал бы.
Сразу видно не Русский 😂
Where are you located bro?
I stay close to Houston , Texas
У нас бы вытянули и задули бы по заводу
Isso sim é funilaria !!!
Your learning kid you want to pick up some good pointers on body work watch Arthur tussik. You can learn alot from him I'm 47 and I'm picking up ideas from his videos.
For sure , everyone I come in contact always has something to teach , I know what I know and know that I don’t know much at the same time lol 😂 I follow Arthur’s Channel and also blue collar Kyle and both have great tips
Arthur Tussik is an excellent master but his videos and his texts are going too fast you barely can catch any details
Пипец . Я не имея особого опыта , вытянул бы крыло без проблем . Рукожопы , старое снять , новое поставить , только это не ремонт , а замена деталей.
Dude, I need to get in contact with you asap! How can I???
How can I contact you?
Instagram ian_j5 or email iansjohnson97@gmail.com, it's auto body related haha
Hi can you please get in touch with me as well. daniel.novotny.x@gmail.com
Auto Wizard same here bro I got some questions on my 2013 camaro
Kristapherm92@icloud.com
Ian Johnson x
Top
один я думаю что он онанист ??)))
lol i have that same shirt wtf
Bad ass shirt lol
@@AutoWizard94 hey how much do you guys usually charge for what u did here in the video??
look at the area of cutting and welding,for me it is not worth cutting the panel.i will rather repair the damage panel and send to pro painter.
Poor Camaro. :(
Lol I know man that sucks but there's always a fix 😃
I saw the part two and the Camaro looks awesome.
Cool lol better than what it came in looking like
Yep.
Jajajja no sabes lo que haces
0699235199 سمكرة
change parts
👍
How did you remove the quarter window??
It has a glue like mixture behind the glass they remove the trim panel and remove the glue with a tool that’s required