I though that might be true too, but it's just a bit of extra glue was holding it down. China glue usually has more surface area to help hold stuff like this together, but since I was being impatient, it was hard to show this clearly.
My brand-new Avanti burned out its ESC. Rather than take the time to order a new one, I replaced it with another 30A ESC. However, I don't recall how it connects to the flight controller. Can you help!
Hey! ive gotten my plane and flown it and so far i am very happy with the way it flys, the only concern i have is while taxying, it dosent seem to want to turn. @@BrianPhillipsRC
LOL - We are CUTTING STEAKS right now - LOL LOL LOL - Thank you Steve! P.S. Our amazing grill is quite literally falling apart, and now I will think of you every time I try to use it - LOL ;) It's not your fault, but it's still hilarious to me
You mean this one - bprc.me/FMS_Avanti - ;) I'm surprised you got my "super secret message" - LOL ;) But seriously, it is still DOUBLE the price of this model, then if you get that, you're looking at about double the price for the Rx, if you setup AS3X and SAFE (which would be a bit superior to the Reflex or the Vector anyway, if you ask me). Then you'll have the 6S power - you have it already, then no problemo...but if it's your FIRST one, then you might need a charger and batteries - you're looking at a $800-1000 bill. Not in the same echelon here...which is why it's so HARD for me to keep that straight. Why not just put a rudder servo in for like $10 (which would be less if you follow our link...we shared one that was like $8ish with an ~450mm lead - AKA long enough to reach the Vector) + the AR620, which would add another $15ish dollars to what we picked....so for about $35 more, and lets say, an afternoon worth of effort, which would be wrapped up in the unbox, build, and radio setup if it was when you first got it...you'll be in a plane that will perform similar to the 70mm (A GREAT PLANE, as you said) for WELL less than half the price. It's not going to be the same, since there's not retracts, and flaps, etc...but it'll hit a lower price point. MY ISSUE IS - why not just put in a rudder at the factory? This would solve all the issue I had with this plane. Some of the OTHER 50mm Arrows planes are similar, but others are GOOD without a rudder. The rudder would be "nice" but it doesn't make or break the plane...with this one, I just think it kinda DOES make or break it. Here's why I'm a bad guy to ask - I know better ;) - LOL Anyway, thanks for being here, and happy flying!
Don't yah love those buggers Brian ? Love your video's . : } lol
They are delicious - YUMMMY IN MY TUMMY - professionalism, it's WHAT you get, on BRIAN PHILLIPS RC ;)
What were your hi rates for ail and elevator? On my bae hawk i set them to 125 after 100 wasnt enough authority 😅 i dont wanna ruin my avanti
How about bateries 4s 1500mah... it is work ??
Looks like the cap with the magnets is in the wrong direction ?
I though that might be true too, but it's just a bit of extra glue was holding it down. China glue usually has more surface area to help hold stuff like this together, but since I was being impatient, it was hard to show this clearly.
My brand-new Avanti burned out its ESC. Rather than take the time to order a new one, I replaced it with another 30A ESC. However, I don't recall how it connects to the flight controller. Can you help!
Hey Y'alls I'm #1 Again! 🤣🤣😁😎
Avanti I wanty
0:42 🎉 need
brian i got my 2nd plane and its coming tomorow i got a carbon cub s2
Congrats! Enjoy!!! Good luck. We have loads of videos on that, so make sure you check them out, when and if you come up with questions
Hey! ive gotten my plane and flown it and so far i am very happy with the way it flys, the only concern i have is while taxying, it dosent seem to want to turn. @@BrianPhillipsRC
Let the glue dry 😂😂😂
si
Hey! I cut a steak right there! (What could this secret code mean??)
LOL - We are CUTTING STEAKS right now - LOL LOL LOL - Thank you Steve!
P.S. Our amazing grill is quite literally falling apart, and now I will think of you every time I try to use it - LOL ;) It's not your fault, but it's still hilarious to me
The FMS 70 MM Avanti is one of the best flying and Quality models that there is . Very easy to assemble and fly . Just buy the FMS 70 Avanti instead .
You mean this one - bprc.me/FMS_Avanti - ;)
I'm surprised you got my "super secret message" - LOL ;) But seriously, it is still DOUBLE the price of this model, then if you get that, you're looking at about double the price for the Rx, if you setup AS3X and SAFE (which would be a bit superior to the Reflex or the Vector anyway, if you ask me). Then you'll have the 6S power - you have it already, then no problemo...but if it's your FIRST one, then you might need a charger and batteries - you're looking at a $800-1000 bill. Not in the same echelon here...which is why it's so HARD for me to keep that straight. Why not just put a rudder servo in for like $10 (which would be less if you follow our link...we shared one that was like $8ish with an ~450mm lead - AKA long enough to reach the Vector) + the AR620, which would add another $15ish dollars to what we picked....so for about $35 more, and lets say, an afternoon worth of effort, which would be wrapped up in the unbox, build, and radio setup if it was when you first got it...you'll be in a plane that will perform similar to the 70mm (A GREAT PLANE, as you said) for WELL less than half the price. It's not going to be the same, since there's not retracts, and flaps, etc...but it'll hit a lower price point.
MY ISSUE IS - why not just put in a rudder at the factory? This would solve all the issue I had with this plane. Some of the OTHER 50mm Arrows planes are similar, but others are GOOD without a rudder. The rudder would be "nice" but it doesn't make or break the plane...with this one, I just think it kinda DOES make or break it.
Here's why I'm a bad guy to ask - I know better ;) - LOL
Anyway, thanks for being here, and happy flying!