very good instructions, I repaired my notebook following these instructions and saved 300 euros. The replacement part cost 51 euros, the repair at the service center would have cost 350 according to an offer. For 10 minutes of work!
Thanks. I have the same laptop with a TN matrix (N140HGA-EA1). I ordered an IPS-ADS matrix (NV140FHM-N4C). I will change it myself. On my matrix, the interface type is eDP1.2. On the new matrix eDP1.3. I found on the forum that both interfaces are interchangeable.
Thank you, the black tape behind the led look hidden for me, I thought it was metal, until I try to pull it, it works flawless, kind of afraid it's gonna snap in the middle, the tape very strong Laptop type is IdeaPad 1 14AMN7 82VF
Hi, my laptop same model has been gradually appearing vertical violet lines could it be a connectivity issue or do i need to replace the screen entirely?
The bit in the video where you say this section can slide off I think its a hinge cover mine it more to the left and I have a bigger cap on the right how can I make it central please
For the sake of 10 minutes, disconnect the battery. The fuze blows by just looking at it. Your method to power down does not remove the power from the display backlight circuit, so my fuze got blown. Otherwise, good video.
@@rickstechrepairs major cracks sir or just small dents? and how to avoid damaging it sir? since I'm trying to open and replace my lcd by watching your video
Great video sir! I am wondering if it is possible to change from TN screen to IPS screen? I really like mine with i5 + Nvidia MX Graphic, but the only downside is the TN screen. Some online shop are selling it but I am afraid if the seller does not know the difference between TN and IPS.
very good instructions, I repaired my notebook following these instructions and saved 300 euros. The replacement part cost 51 euros, the repair at the service center would have cost 350 according to an offer. For 10 minutes of work!
Excellent! Good job, saved a fair bit of money there
Very well explained, great quality...followed step by step and no I feel accomplished, so Thank you!
Well done :)
Thank you very much sir. Really helpful. I appreciate your effort for this video
Thanks. I have the same laptop with a TN matrix (N140HGA-EA1). I ordered an IPS-ADS matrix (NV140FHM-N4C). I will change it myself. On my matrix, the interface type is eDP1.2. On the new matrix eDP1.3. I found on the forum that both interfaces are interchangeable.
i would usually expect eDP1.3 to also support earlier versions
Great video ! Super quality and well explained 👍
Cheers
Thank you,
the black tape behind the led look hidden for me, I thought it was metal, until I try to pull it, it works flawless, kind of afraid it's gonna snap in the middle, the tape very strong
Laptop type is IdeaPad 1 14AMN7 82VF
certainly is crazy strong tape
This was really helpful. Thanks mate.
your welcome :)
Thank you soo much! You literally saved me 🙏🏻
Glad I could help!
Hi i am same laptop, i am in United Kingdom Manchester... Where can I get the panel from with similar specs?
I did this without disconnecting the battery and have blown backlight fuse. How come yours didn’t blow fuse?
Hi, my laptop same model has been gradually appearing vertical violet lines could it be a connectivity issue or do i need to replace the screen entirely?
usually lines, is a damaged display
The bit in the video where you say this section can slide off I think its a hinge cover mine it more to the left and I have a bigger cap on the right how can I make it central please
not sure sorry
For the sake of 10 minutes, disconnect the battery. The fuze blows by just looking at it. Your method to power down does not remove the power from the display backlight circuit, so my fuze got blown. Otherwise, good video.
that can be done
I think I having this problem, the screen is not lighting up at all but I can tell it is connected. Where is this fuze located?
@@d.chaney8615 it is the motherboard very close to the screen connector. Marked FG3301.
Do you know where the fuse is? How will I recognize her?
I did this without disconnecting the battery and have blown backlight fuse. Where is the fuse ?
No idea
Hi, can you make a video on how to replace the keyboard for this Lenovo model?
Not a simple task, I don't recommend attempting t
sir does opening the back chasis cause minor dents? since using pry tool or guitar pick may seems cause dents since it uses force to open it?
yes its possible to damage the chassis when opening
@@rickstechrepairs major cracks sir or just small dents? and how to avoid damaging it sir? since I'm trying to open and replace my lcd by watching your video
Thanks for the video..
May i know, screen resolution of Ideapad slim 3 14ADA05?
Because in the market, there are 2 versions, 720p and 1080p
not sure, but you can upgrade to 1080P
@@rickstechrepairs ok thanks sir
is that okay replacement lc without double tip just like you did, bcuz i dont have that
that should be fine
Great video sir! I am wondering if it is possible to change from TN screen to IPS screen?
I really like mine with i5 + Nvidia MX Graphic, but the only downside is the TN screen. Some online shop are selling it but I am afraid if the seller does not know the difference between TN and IPS.
Changing panel should be possible, if you wanted to get fancy you could try a 144hz panel
@@rickstechrepairs thank you for the reply 🙌
@@nasgordude did you try this? I want to do the same to mine
I think I may have found an IPS screen for this laptop. Will order it, then install it and report back.
@@xpheonixgamingx325Did you order and replace the screen yet?
You are supposed to disconnect the battery first to prevent backlight problem. 75% of the case will result in backlight problem
true, personally yet to have an issue aslong as the device is powered off
Я не отключил батарею и у меня сгорел предохранитель подсветки. Почему вы не сказали об этом?
Can't read sorry
would it perhabs be possible to upgrade the screen to a better OLED or LED variant?
I don't think so. You could possibly get a higher resolution screen,
If you have a 720p display, you could upgrade to 1080
im trying this later today i will update you, my current screen is Innolux N156HGA-EA3, upgrading it to Innolux N156HCA-GA4
look it up on panelook.com
@@tanchunyong3418 let me know too bro i hhave a idepad 3 bro the screen si so horrendous
can i replace the lcd cable w/o removing the screen front?
No
What kind of 3M tape did you use for this?
Not sure
I think I may have found an IPS screen for this laptop. Will order it, then install it and report back.
Good luck
Thx, ill need thiz
Cheers