Yes, this was originally (when it came in) a job for a client but they decided to instead go with data-recovery only, so I acquired the unit and tried my luck.
Just started watching your channel last week. I an a fan of Louis Rossmann and I kept wondering who is this "Paul Daniels" that he keeps referring to. I got a copy of your OpenBoard view software and was blown away by it. I am a retired System Administrator and Exchange server administrator, now I spend my time watching UA-cam videos on car repairs and computer repairs. Keep up the great videos.
No no no, know you as you are! No need to please others. Unless you really want a change,but do what you think is right! Oh yeah your video is fine as usual and very informative! Cheers Paul!
@@pldaniels bah, keep the hair and beard. save more money that way. trust me i have saved thousands. not cut my hair since i was 11 and not shaved since well it could grow.
Another vote for not conforming ;) I use Kapton tape , a cut out for the component being worked - to shield heat to other components , ya I know more hassle . Thanks again
Usually if it's crucial, I have sheets of metal, about the same as iPhone shields, which I fold up to make a nice shield; makes it easier for when I have to do it again. Real trick is making sure that metal doesn't touch anything else with a low melting point, else "oops"
Smashing job :-D. Nasty pcb, it looked like it needed a jetwash :) Some of the one's i've seen louis have in for repair needed toilet bleach sprayed over them, food/drink and unknown deposits, yuck yuck :-(. So far i've only seen thick dust on laptop boards, and a dust duvet's in main machines.
i have problem in macbook pro A1278 there is vertical dark and coloured band on display sometimes its change its position so how can i overcome or solved this problem
i have a a1278 early macbook pro 13" that has dead usb ports, when i took the bottom off the u4600 chip i think is hot, very hot, you can't touch it for very long, any ideas?
If it's not from a donor board, then it'll be just from my collection of spares that I buy from the electronics supplier ( Farnell / Element14 / Mouser / Digikey ). If you want a broad spread of parts, you can get 'books' of 0402, 0201 resistors from places like eBay or AliExpress.
I think some people are predisposed to being an ESD hazard (my wife is certainly one). Approaching 40 years now with various electronics, including the incredibly sensitive 4000 series CMOS chips from the 80s, and to date, no issues. Possibly good luck, yes. The other key thing though is that once parts are assembled on to a board, it's quite difficult to do any sort of ESD damage with the human discharge.
There's some boardviews for phones available but overall the quality is sub-par. FlexBV/OBV can read several formats ( and we're always trying to add more ) but at this point for some reason the array of phone boardviews are locked up by the likes of ZXW/EasyDraw/Phoneboard
how do these boards look so gross. its really puzzling me all the time its like once it gets wet once or any kind of moisture in general it starts to look like a cat lmao.
Donor boards in my workship will definitely turn in to cat-like critters over time, just simply from the strands of hair that slip in on the air alone (cats aren't permitted in this room). Still, not much point me USC'ing donors :D
Hi. I have same board and a little problem. Two tracks are burned by water damage and I need help finding where to connect them. Machine is booting and working but i would like to repair these two tracks. Video: ua-cam.com/video/m7WsbHuLqVw/v-deo.html
Nice to see a repair result in a success rather than go to waste due to endless rabbit holes. A good way to celebrate 10k+ subs
Yes, this was originally (when it came in) a job for a client but they decided to instead go with data-recovery only, so I acquired the unit and tried my luck.
Just started watching your channel last week. I an a fan of Louis Rossmann and I kept wondering who is this "Paul Daniels" that he keeps referring to. I got a copy of your OpenBoard view software and was blown away by it. I am a retired System Administrator and Exchange server administrator, now I spend my time watching UA-cam videos on car repairs and computer repairs. Keep up the great videos.
Thanks Bob, appreciated. Enjoy the more 'casual' time in life.
No no no, know you as you are! No need to please others. Unless you really want a change,but do what you think is right! Oh yeah your video is fine as usual and very informative! Cheers Paul!
I'm due for my annual haircut anyhow, it's getting a bit long and uses more shampoo & conditioner :D
Paul Daniels Good on ya! Just don't watch those Gillette commercials. Especially if you decide to shave! Ha ha! I,m sure you,be seen them!
@@pldaniels bah, keep the hair and beard. save more money that way. trust me i have saved thousands. not cut my hair since i was 11 and not shaved since well it could grow.
Congratulations on 10k subscribers.....great job as usual and good luck in your future Paul Daniels 👍
Thanks Dan, appreciated.
Congratulations on reaching the 10,000 subscribers Paul.
It is all down to your own special "Magic" :) Cheers.
Big boy pants. Wow I dream of that. Well done again Paul
Training wheels come off next, at 100,000.
You are the most beautiful man in this planet my friend, you are also a very smart person.
Another great video! Good job on the repair and Congrats on reaching 10K subs!!
Excellent job...I enjoyed to watch it
Paul, you can always use huge amount of flux as your hair conditioner, thus you can become equal to Louis' amount of flux used!
congrats Paul way to go ive been watching love your vids
10K - well done Paul - onward and upward. Regards, Dave
Thank you David, appreciated.
DO NOT CUT YOUR HAIR PAUL!
Congratulations on the 10k subs. Tell that bloody Rossmann he's just jealous of us hairy Aussie blokes ;)
much better soldering than Louis' :)
Congratulations on 10,000 👍
Hello my aussie friend. New sub. I shall call you the black haired Julian Assange :D. Cudos to Louis for the constant PaulD brag lol.
Another vote for not conforming ;)
I use Kapton tape , a cut out for the component being worked - to shield heat to other components , ya I know more hassle .
Thanks again
Usually if it's crucial, I have sheets of metal, about the same as iPhone shields, which I fold up to make a nice shield; makes it easier for when I have to do it again. Real trick is making sure that metal doesn't touch anything else with a low melting point, else "oops"
Congratulations on 10k subs, I should try and get Louis to push my channel... only 4000 to go.
Smashing job :-D.
Nasty pcb, it looked like it needed a jetwash :)
Some of the one's i've seen louis have in for repair needed toilet bleach sprayed over them, food/drink and unknown deposits, yuck yuck :-(.
So far i've only seen thick dust on laptop boards, and a dust duvet's in main machines.
Hello Paul !!! I have my microscope stand full of parts as well 😂 👍
Whre can i get the board view and schematics ?
i have problem in macbook pro A1278 there is vertical dark and coloured band on display sometimes its change its position so how can i overcome or solved this problem
i have a a1278 early macbook pro 13" that has dead usb ports, when i took the bottom off the u4600 chip i think is hot, very hot, you can't touch it for very long, any ideas?
Do you sell the exact same logic board?
If so do you think you can ship to South Africa?
@Paul Daniels where do you get those spare capacitors and resistors? thanks in advance and keep on the good job and streams!!
If it's not from a donor board, then it'll be just from my collection of spares that I buy from the electronics supplier ( Farnell / Element14 / Mouser / Digikey ). If you want a broad spread of parts, you can get 'books' of 0402, 0201 resistors from places like eBay or AliExpress.
Thanks👍❤❤
sorry, it's a early 2011 i5 CPU EMC 2419 820-2936
Never seen such big globs used on this stream
aren't you worried about ESD? no gloves, no ESD mat, no ground? Just curious:) great vid!
I think some people are predisposed to being an ESD hazard (my wife is certainly one). Approaching 40 years now with various electronics, including the incredibly sensitive 4000 series CMOS chips from the 80s, and to date, no issues. Possibly good luck, yes.
The other key thing though is that once parts are assembled on to a board, it's quite difficult to do any sort of ESD damage with the human discharge.
Hi Paul, the FlexBV software also works for mac on Mojave?
Hello Paul, can you tell me what commands are you running in the terminal before the Mac Os X installation?
I was setting the date on the system (using 'date') so that the installer wouldn't fail.
@@pldaniels than you.
Hi Paul, how your FlexBV sales going ? Is the Mac OS version of the software fully functional ?
Going well thank you. Yes, the macOS version has all the functionality.
Have you ever replaced memory slot - just curious
No. Easier/simpler to just cram a 4GB SODIMM in there instead. From what I've seen, trying to fix one results in two broken slots.
keep them coming mate, by the way is your software also works for phones?
There's some boardviews for phones available but overall the quality is sub-par. FlexBV/OBV can read several formats ( and we're always trying to add more ) but at this point for some reason the array of phone boardviews are locked up by the likes of ZXW/EasyDraw/Phoneboard
Good morning sir what software you are using for schematic.
FlexBV - pldaniels.com/flexbv
Nice job, nasty bug. Please add the subtitles, the non English speakers will aprecciate it.
Are you using fluxbox as your window manager? If so i'm very impressed :)
Yes. Not real keen on having a full DM, so sticking with a lightweight WM is far more my preference.
Hi Paul. Great video. What was that boardview software you were using btw ?
That's FlexBV, which is my commercial boardview software.
pldaniels.com/flexbv
now lets do 100k paul :)
Found it, it is a r5410 to u5410(ina213) track. ISNS_HS_OTHER_N and ISNS_HS_OTHER_P.
congrats for the 10k and next time give us blood lol that was close :-) with those twizers lol
Is that a mechanical HDD in 2019? I am perplexed. 🤔 😕
way better than that potty mouth new york guy... thank you!
You will find when you stop fixing that model you will have all these spare boards left.
I don't care about you C-ism in OBV, but the beard must stay or it won't make sense anymore!
So long as you don't call me Stallmann.
Nice to watching your channel but sometimes cant understand what you are saying, can u pls speak more clearly?
how do these boards look so gross. its really puzzling me all the time its like once it gets wet once or any kind of moisture in general it starts to look like a cat lmao.
Donor boards in my workship will definitely turn in to cat-like critters over time, just simply from the strands of hair that slip in on the air alone (cats aren't permitted in this room). Still, not much point me USC'ing donors :D
lmao ahaha i see
Hi. I have same board and a little problem. Two tracks are burned by water damage and I need help finding where to connect them. Machine is booting and working but i would like to repair these two tracks. Video: ua-cam.com/video/m7WsbHuLqVw/v-deo.html
text