Macbook Pro No Light on Magsafe Repair on 13" Mid 2012 820-3115

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 34

  • @JonTrott
    @JonTrott Рік тому +1

    Great video. I have repaired a number of old MacBook Pro 2009-2012 laptops, but not with soldering involved (except once, just to disable the bad gpu on a MacBook 2011). This was soothing to watch... dunno if I'll ever attempt the above, but really enjoyed the succinct way you have of making the arcane understandable.

  • @BTBAB-yj1cn
    @BTBAB-yj1cn 5 років тому

    Thanks so much for faithfully contributing, I only wish it was more frequent (actually I could watch everyday)!! I am sure posting to UA-cam is quite time consuming. I am always eagerly looking forward to your next video to help me expand my knowledge and skills in electronic repairs. I love your step by step approach, diagnosis, explanation along with schematics, and I have learned so much from your videos. Thanks again and keep up the great work!! Regards

    • @PowerbookMedic
      @PowerbookMedic  5 років тому

      Thanks for the support. We will try to post videos more frequently. Usually when we don't post for a week or two it means we're inundated with repairs and we prioritize customer repairs over videos.

    • @BTBAB-yj1cn
      @BTBAB-yj1cn 5 років тому

      Understandable, thanks again for everything!

  • @harhar4607
    @harhar4607 5 років тому

    As usual, clear, concise & easy listening video.
    All details precise & presented in a nice relaxed manner.
    Kind regards

  • @MOHAMED-qh3px
    @MOHAMED-qh3px 5 років тому +1

    i like all your videos Sir thank u very much

  • @agersoncruz
    @agersoncruz 5 років тому +2

    Another great video. Pretty didactic. Congrats!

  • @deedeelowe9231
    @deedeelowe9231 Рік тому

    Great video! I learned a lot.. you're a great teacher... you get to the point with what you're doing. Now I wanna be a Mac repair girl. LOL

  • @RobertsSouza
    @RobertsSouza 3 роки тому +1

    What is the liquid you used to find the hot component that evaporates quickly? It is not alcohol, is it?

  • @linksrepair2851
    @linksrepair2851 5 років тому

    nice video and thanks for sharing also nice to see you back.

  • @rayshowalter6265
    @rayshowalter6265 3 роки тому

    Thank you very much, Your a wealth of knowledge and greatly appreciated.

  • @milthonurregozipa1683
    @milthonurregozipa1683 4 роки тому

    Muy buen video, gracias por tus enseñanzas, que clase o que marca de flux utilizas?

  • @unseenviews745
    @unseenviews745 4 роки тому +1

    very nice video. but sound is little low.

  • @rjt4020
    @rjt4020 4 роки тому +1

    Hi great vid. Have subbed & liked. Trying to fix my old MacBook 13" mid 2012. Had boot loop issue, put new keyboard in, boot loop fixed. Tested my patience, hahah. Now charging issue, disconnected battery & all ok, strong green light on magsafe & booted up great, no probs. But when battery is connected have initial strong green light for a few seconds then goes to weak orange light & won't charge! Any chance you can help please?

  • @788bong
    @788bong 3 роки тому

    Hi what software you are running to see the service manual?
    Thank yoy.

  • @computersrepaircotesaint-l7407
    @computersrepaircotesaint-l7407 4 роки тому

    Nice vid save me the time to check which coil making 3.42

  • @hardenufftv9040
    @hardenufftv9040 4 роки тому

    Hi good video but what if all the readings on the one wire circuit are correct and there is no short to ground, the voltages are present on the board, yet the tested and working magsafe still has no green light ,no charging light , and won't power on but it still charges the battery ?

  • @midodido1941
    @midodido1941 5 років тому +1

    GOOD JOB BRO

  • @janaram6118
    @janaram6118 3 роки тому

    dude i have a mcbook pro a1278. . i think the replacement charger is faulty so i try to plug in , in my dc power supply it works and everything. but the current amps is 3.60 and its getting crazy hot. why is it drawing 3 amps? is it because of my dc power supply?

  • @ELMACODOMREP
    @ELMACODOMREP 4 роки тому

    hello the usb you use for test what kind the os or software you are using on it's

  • @ooh1972
    @ooh1972 3 місяці тому

    Hello my MacBook pro 2011 can't not see battery ,how do I can fix it?

  • @heinzsugiarto3861
    @heinzsugiarto3861 5 років тому +1

    nice..great..manteb bro

  • @unqx
    @unqx 2 роки тому

    Schematic which Company

  • @trxxtinnxr2673
    @trxxtinnxr2673 6 місяців тому

    My charger gets really hot and burns me at the touch and hardly ever charges. When it does charge it gets abnormally hot and can cause damage to the skin. When it does charge it shows either a very dim Orange light or a bright green light what could this be??? I’ve been through way too many chargers and cleaned the contacts and still no charge?

  • @GNegasi
    @GNegasi 4 роки тому

    I have similar problem instead of no power ,I have very dim green light on the charger but there is no power to start the laptop or to charge the battery.
    I have 2010 mac book pro 13 a1278
    Please help

  • @dacostamartindale2287
    @dacostamartindale2287 3 роки тому

    hi......if i am getting a green magsafe light and machine not powering up?

  • @powerblaze2u
    @powerblaze2u 4 роки тому

    My macbook early 2011 15" chargers for few minutes and then stops. Light goes off.. and the fan starts spinning high .. could it be the same problem?

  • @albywahyu7021
    @albywahyu7021 4 роки тому

    Great

  • @hazem-B-hamada
    @hazem-B-hamada 3 роки тому

    hi sir ,
    please could you please let me know the digram program which you are using !!!
    all the best

  • @rjt4020
    @rjt4020 4 роки тому

    BTW. Im in UK.