Peugeot 107 Fitting Alloy Wheels, How To Get The Size Right, Lowering Springs Toyota AYGO Citroen C1
Вставка
- Опубліковано 15 кві 2018
- This video is showing how to fit alloy wheels, How to check measurements to get the correct size, how big can you fit, the best size for road holding and handling.
Different tyre sizes, also we try different spring heights, eibach pro kit, 25MM , and Apex 35MM lowering springs.
Link to lowering springs on amazon amzn.to/35VhXYw
Replacement Wheel bolts M12 35MM thread Domed heads to fit the ATS Cup Junior Wheels
15” 6j Et35
All the same as Toyota AYGO and Citroen c1
These cars all have a PCD if 100 although the width is different, but now you can check to see what will fit after watching the video.
BMW series 3 (E30)
CHEVROLET Aveo, Spark (only 4x100)
CITROEN C1, C-Zero
DAEWOO Espero, Kalos, Lanos, Nexia, Nubira J200
DAIHATSU Applause, Charade, Cuore, Grand Move, Materia, Pyzar, Sirion, Trevis, YRV
FIAT Grande Punto, Punto Evo
HONDA Accord ( -1989), City, Civic, Concerto, CRX, CRX Del Sol, Insight, Integra, Jazz, Logo, Prelude (1978-1991)
HYUNDAI Accent (2000- ), Atos, Getz, i10, i20
KIA Picanto, Rio, Sephia, Shuma
MAZDA 121(1991-1996), 2 (2007-), 323 (1989-1998), 323 Protege, Demio, MX-3, MX-5
MINI ONE Cooper, Cooper S, Clubman, Cabrio, Coupe
MITSUBISHI Attrage, Colt, Crisma (1.6i-1.9TD 1995-1999), Lancer (1992-2003), Space Star (2013-)
VAUXHALL / OPEL Adam, Agila, Ascona, Astra I, II, III, Calibra, Combo, Corsa, Kadett, Meriva, Tigra, Tigra Twin Top, Vectra A, B (4stud only)
PEUGEOT 107, 108
PROTON 300, 400
ROVER 200, 25, 400, 45
SEAT Arosa, Cordoba, Ibiza I, II, Inca, Mii, Toledo I
SKODA Citigo, Felicja
SMART ForTwo (2014-), ForFour (2014-)
SUZUKI Alto, Baleno, Ignis, Liana, Splash, Swift, Swift AWD, Wagon R+
TOYOTA Aygo, Carina, Corolla, IQ, MR2, Paseo, Starlet, Yaris, Yaris TS, Yaris Verso
VOLVO 340, 440, 460, 480
VW Caddy ( -2003), Golf I, II, III, Corrado, e-UP, Jetta, Lupo
I think the optimum size is a 15” Wheel with a offset et of 35, width of 6j , with 175 50 15 Tyre.
You can fit a 16” Wheel but then drop the side wall down to a 45 to get the he same look.
17” A’s far as I can work out will rub. I would love to know if anyone had done this with a standard set up.
The highest Et is 38, on a 6j rim ET40 will touch the suspension leg.
Remember the lower the ET the more the wheel sticks out.
Link to ATS Wheels
www.wheelbasealloys.com/alloy...
Wheel bolts extended 16 x M12 x 1.5, 35mm Thread, Radius Wheel Bolts (Silver)
eBay seller alloy-wheel-solutions.co.uk
#citybug #peugeot107 #toyotaaygo #citroenc1 - Авто та транспорт
That was great, you detailed everything with reasons. Safety first and the rules of the road are there to protect us. Love your channel!!!
Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠
Enjoying all your vids, learning stuff every one cheers
Awesome, thank you! & Thanks for the great comments👍🏻👍🏻🛠
Thanks for the review! Recently I've got the Alutec Grip 15*5.5 et 36 dia 54.1 with the 175/50 r15 dunlop tyres for my 107, and it fits like original part
Good choice! They will look great, Thanks for the great comments👍🏻👍🏻🛠
Glad to see our bolts there!
Should I ask for some commission😂 Do you have a direct link I can add to the description for the bolts? Thanks for the great comments👍🏻👍🏻🛠
Very useful video, thank you !
Thanks for watching 👍🏻
Great video, SO useful.....
Thank you mate!
Thanks for watching 👍🏻👍🏻
After 3 months, i keep watching your video almost every day, haha :)
Im looking every day for a set of a 6j wheels, but luck is not with me, so im thinking of a set up of 15x7 ET30 which is a very common size, plenty of sets for sale with these specs, plenty of designs as well! I will use 175/50 with the 7"s, i believe it wont stretch much and will be safe.
Will a slight fender rolling help to fit 15x7 Et30? Whats your opinion? Thank you !
so all the wheels you mention will fit great video also thanks for making
No problem 👍 Thanks for the great comments👍🏻👍🏻🛠
Thank you very much, saved hours and hours of diving in and out of forums
Thanks for the great comments👍🏻👍🏻🛠
a trick : watch movies on flixzone. I've been using it for watching all kinds of movies recently.
@Tony Bowen yea, have been watching on flixzone for months myself :D
@Tony Bowen Yea, I have been watching on flixzone for months myself :)
A very informative review....thanks .
Thanks for the great comments👍🏻👍🏻🛠
Nice vid, fancy dropping some springs on mine 😀 👍🏼
Give it a bash full video here ua-cam.com/video/GAsWu2Vlbf4/v-deo.html Thanks for the great comments👍🏻👍🏻🛠
I actually prefer steel wheels with wheel trims. There are two reasons. Firstly we all kerb wheels and scuff them eventually or they get ratty because of crappy potholes and unmade laybys. Alloys look scabby after a while and it's expensive and inconvenient having them restored. They also end up getting brake dust baked in and they look manky. With steel wheels you just replace the trims every few years and you're done. Far cheaper and easier. I'm looking forward to getting a 107 with steels rather than alloys which I have on my current car. Good video though because I do want a spare set of wheels with winter tyres fitted.
Each to their own, some steels look very nice, Thanks for the great comments👍🏻👍🏻🛠
Useful info thanks. Looking at getting a Citroen C1, possibly tomorrow. Would like to put some alloys on, and maybe lower it at some point, so it's good to have the info to hand. I'll probably stick to 14" wheels, depending if I can find something I like.
sounds great, Thanks for the great comments👍🏻👍🏻🛠
Hi, your gearbox and clutch replacement videos helped me immensely (understatement) with the clutch replacement on my Wife's Aygo. Thank you for this. I was hoping you could direct me to a resource for timing belt/chain replacement?
Wow, I have never had a issue with a timing chain on this engine, what issues are you having 🧐👍🏻
@@aaanton11 no issue, just asking as normally on cars the belt gets changed around 80000km, unless this car has a chain and not a belt?
It’s a chain, and they are fantastic 👍🏻👍🏻
Brilliant
Thanks for the great comments👍🏻👍🏻🛠
The Peugeot 206 GTi (138bhp) Nimrod alloys I think would look good, They come in 15'' and 16''
I had the 16'' Nimrods, good looking wheel.
I think they would look great, Thanks for the great comments👍🏻👍🏻🛠
I'm considering buying C1/107/Aygo soon as a "city ride" and the first thing to do for me is lowering it reasonably and fitting some nice wheels (btw these look properly cool :D) That is one awesome video about all info I need ;)
Thanks mate, also for other stuff about this car. Useful channel for me in the near future. Cheers ;)
Thanks for the great comments 👍🏻👍🏻🛠
107 it is more nice design then c1 and aygo. All have same Toyota engine I have one and i love the car and some times i drive on autostrada and run ok with 130 km/h. Top speed it is 160
Heyy been watching your videos and found out that you are super genius person and i am here i am unemployed but i have experience in car field so if u have any job for me let me know pal
Thanks for the great comments usman 👍🏻👍🏻🛠
The MK2 Golf GT Special has 185/55/15 with the BBS RA375(6X15 ET35) from the Factory. I think it can be fit on the C1, Aygo and 107 ;)
Thanks for the great information👍🏻👍🏻🛠
Those wheels are heavy af. Had a set of those once.
Great video.👍 The alloys you have fitted look well cool.😎 Would 175/50 tyres fit on a 6.5x15 inch rim?
They should, full list of fitments in the video description Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Thanks for the reply.👍👍👍
I've just bought a wee Toyota Aygo 2009, 80k, when pulling away from start, upon releasing clutch, it only bites near when the pedal is fully deingaged, coupled with judder & a whine noise? Is the clutch needing manually adjusted or worse, sorry, it's a 5speed manual, no service history! Cheers x
I have a video on the clutch adjustment, and also one replacing the clutch, sounds like the release bearing might be worn, but worth trying to adjust it first thanks for the great comments 👍🏻👍🏻🛠
Them wheels remind me of the 205 1.9 GTi wheels, the 15'' Speedlines.
Love the look proper 80s vibe Thanks for the great comments👍🏻👍🏻🛠
Great video silly questions to remove wheel nuts are they clockwise or anticlockwise on the 107 thanks
anti clockwise to remove on all wheels, Thanks for the great comments👍🏻👍🏻🛠
Hi just wondering did you put lowered shocks on or atill standards?? Also if they are standard how is the ride with the lowering springs aa i want to lower mine a touch just to make it more stable but i dont want it to be banging down the road as i quite like the comfortable ride
I recommend these eibach springs amzn.to/2VUitm2 top quality ride and stance, Thanks for the great comments👍🏻👍🏻🛠
I want to buy some new alloys for my 107 because I don’t like the width of the standard wheels. Iv had a black wheel trim added to the standard ones but I don’t like it anymore. Can I ask for your help and advice if you don’t mind. I’m sure you are very busy helping many people. I used your fuse board video to fix my radio that stopped working so your videos are very helpful.
What would you like to know ?, Thanks for the great comments👍🏻👍🏻🛠
Thanks for all your help, I got a c1, but the dimensions should be all the same.?
I believe so, Thanks for the great comments👍🏻👍🏻🛠
hi. nice video. can you tell me what is the biggest wheel you can put on the aygon?
Some have fitted 17" but the drive is not as good, 15" with 175 tyres like in the video is best in my opinion Thanks for the great comments👍🏻👍🏻🛠
Very nice video... What is your opinion about 15 but 7 inches wheels? Is it possible to fit?
Everything is possible, but you might need wheel spacers to avoid rubbing Thanks for the great comments👍🏻👍🏻🛠
Thanks for the video, extremely insightful and inspiring! Just for my reference, do you reckon I could get a 7J rim at 195/45/15 offset 35 in without catching the suspension or sticking too far out from the fender? Thanks again for the great video!
I don't think a 195 will fit, Thanks for the great comments👍🏻👍🏻🛠
I have same size tyres on my 107, mine are 6.5j though but they fit fine, with no rubbing at all! Unsure with the 7j!
Do you know where i can find a short shifter for the mk1 aygo? Or fic the sloppy sideways movement on the gear knob
you can cut down the gear knob, altho the selector bushes might be worn Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 ive been looking everywhere for shifter bushings but cannot find them anywhere
Hi I’ve always watched your videos iim going to change my standard wheels on my citroen c1, I got the 16” 7J 40 offset do you think they’ll be alright?
Wow🧐 That will be close to the strut, I would love to know how you get on, worst scenario would be to use some wheel spacers, I think you might just get away with it, really hope they look the business thanks for your great comments👍🏻👍🏻
Did it fit?
I've ordered 16" 6.5J ET 40 with tyre 195/45 R16
And planning to lower the car with coillovers it's a 108
But so now and then I'm not sure it will all fit?
Ordered everything already.
@@Lonewolf_rider did it fit?
@@mcbueni9444 yes it did.
Lowered the car with ST coillovers all works perfectly well!
@@Lonewolf_rider will a rim with an et20 fit ?
An old video I know, but. I was going to remove the rear seat on my C1 and was told it would make my insurance void as it was classed as a "modification". Rang my insurance and after a 30 minute wait while it was looked into, the answer came back, removing the seat backs or the full seat was a modification and would make my insurance null and void, a bit of a surprise to say the least.
So my question would be, what would lowering the suspension and fitting oversize wheels do to the insurance, I could only guess.
In my experience most insurance assessors I’ve dealt with don’t even look for modifications, they just look at the damage or the issue the insurance claim is about,
so it’s up to you, if you want to take the chance not declaring any modifications you make.
if you don’t declare you are always running the risk of a claim being made in valid, but like I say it is very rare for any modifications to be investigated following an accident unless its fatal. Thanks for the great comments👍🏻👍🏻🛠
Lovely wheels. What effect, if any, did it have on your insurance premiums?
No difference, Thanks for the great comments👍🏻👍🏻🛠
You say at the start of the vid that the wheels are ATS Cup Juniors? I can only find ATS Cups when doing a search. They look the same to me so what's the difference between the Juniors and non-Juniors?
Juniors being the smaller offset, and j
Thanks for the great comments 👍🏻👍🏻🛠
I'm after a more smoother ride, and slightly higher... how big can the wheels be on a Peugeot 107 2014?
And any recommendations on shock absorbers?
Bigger wheels tend to rub, but watch this video might help ua-cam.com/video/LYpPsNsA2uw/v-deo.html Thanks for the great comments👍🏻👍🏻🛠
hello, nice video , still confusing :-D, want to change my wheels , in your opinion currently i have ET38 41/2Jx14H2 with tyres 155/65/14 and found nice wheels but they are ET38, 6Jx14h2 with tyres 185/60/14 ? Thanks.
I don’t see why they won’t fit as long as the pcd is correct, ie the bolt spacing, thanks for the great comments 👍🏻👍🏻🛠
Did you only changes the springs for the ones from Eibach to lower the vehicle?
Yes to lower the car and improve handling the link to the springs is, amzn.to/35VhXYw Thanks for the great comments👍🏻👍🏻🛠
Are there any alloys from another car that would fit on without any modifications? I was looking at the Toyota Yaris alloys but I understand they don’t fit either?
The list is in the description of wheels that will fit, Thanks for the great comments👍🏻👍🏻🛠
Hi there pal, i have a few questions about the wheels and suspension mentioned in this video, anyway i can message you to have a chat and get some help? Thanks
yes just message on here, might help someone else too, Thanks for the great comments👍🏻👍🏻🛠
Hi. Any chance you still have the link for the wheel nuts ? Thank you
Ebay M12 x 1.5 Radius Alloy Wheel Bolt Short to Extra Long Extended Thread Length 35 mm length, Thanks for the great comments👍🏻👍🏻🛠
Hello,
This is a really great channel.👍
I own a 2012 C1 with steel wheels. I have bought an orginal set of five spoke alloys from a peugeot107. Can I use the bolts that are on the car or do i need to change them? Thank you.
The bolts should fit, just check they are long enough at least 10mm thread poking out the back of the wheel, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Thanks for the info.👍
Hi, great channel with good information, just after some info, i have a 107 56plate. I have got a set of mx5 mk2 alloys 15x6JJ 4x100 ET40 54.1 they are currently on 195-50-15, will they fit on the 107 or will i need some spacers? Any help is much appreciated 👍
Also how do you work out how long the wheel bolts need to be? Thanks
You will need to look at the holes where the bolts go some are domed holes and some are tapered, if you have the new wheels just offer them up to the hubs and see how much clearance you have, Thanks for the great comments👍🏻👍🏻🛠
Would you be able to run et20 offset seen a nice set of alloys on Facebook marketplace
depends on the size of the wheels, diameter & J Thanks for the great comments👍🏻👍🏻🛠
I would like to know what’s the biggest alloys I can get without it rubbing on the wheel arches?
What actually size alloys do you recommend?
Apart from the standard places like eBay do you recommend another place I can get some second hand alloys from?
Thanks.
Personally I think the size I have fitted is the perfect combination of looks vs performance, but it is all about what you like. Thanks for the great comments👍🏻👍🏻🛠
Can you give me the information on the wheels you fitted? Is the width of the new ones wider than the factory ones?
Hi Anton, interesting video. Are you on c1oc forum? I wanted to ask you for your thoughts on these gold alloys apparently from a Mini One/Cooper R56 : it's this thread - forum/viewtopic.php?f=3&t=12305 (add it to the end of c1oc.co.uk). If you can't find it search for posts by member AygoRacing dated 12 Dec 2018. He mentions that they need 3 mm spacers but I really like the look of them. Would they affect the handling? I don't know what width they are but he says the tyres are 175/50/15s so should be the same as yours. I have a 2010 C1 Splash in that nice metallic blue and I think those wheels would be sweet on it. A couple of Ebay ads for the wheel I've found says they are 4.09mm 5.5J ET45 if that helps you figure it out. Thanks.:)
I will have a look and get back to you 👍🏻👍🏻🛠
hi buddy love all your vids, i just brought some 15's 6.5j for my pug 107 will 175 50 15 still be good on these as i wont be lowering my springs too many sleeping policemen where i am! one love
should be fine,Thanks for the great comments👍🏻👍🏻🛠
Hi there, what is the biggest alloy size THAT CAN FIT an aygo MK1?
Its all in the video, Thanks for the great comments👍🏻👍🏻🛠
Can you do a video showing how you fit the apex lowering springs plz 😁
I will do, next time I fit some 👍🏻 thanks for the great comments 👍🏻🚘
Do you still have these alloys on your car ? If ya dont mind me asking how much did you pay for them ?
As i am wanting smaller alloys on mine as i have lowerd it and its rubbin on arch
Currently running 195/45/15
But wanting 14” inch alloys
Thanks for the comments, cost of wheels £230 tyres £208, you should only need to change your tyres to a 175 50 15 👍🏻👍🏻
Would you be interested in selling? I know it’s not best place to ask and btw loved the jacket wawaw
Sorry only just bought them, but thanks for asking 👍🏻👍🏻
Do I need to glue the spigot rings or just pop it in?
Just pop it in , Thanks for the great comments👍🏻👍🏻🛠
Some notes worth mention. ALWAYS clean the matting surfaces of the wheel and respective hub prior to assemble. The sheer amount of corrosion, debris, etc. will ALWAYS produce unnecessary vibrations. Introducing wobble precisely where you don't want it! Observe, on this same video (3:05), the condition of both surfaces and it will be crystal clear what I just mentioned.
Wire brush and some elbow grease will set you back on track right away. Since I prefer to spare my sweat. The use of a cheap "mouse sander" turn it into an easy 30 second job! ;-)
Wheels and tires As usual choice is based on how it "looks". While on the looks department there's not much to say... On EVERYTHING else, it's simply a ridiculous choice!
You end up loosing on weight, drivability, performance, consumption, emissions... AND on top you have to pay for it! Let's face it, it's a laughable case! LOL 😂
Something to think about. Cheers
Thanks for the great information👍🏻👍🏻🛠
I would like to go to 185/55r14 on 5,5J but i'm not sure if it will fit and cant find any reference of that size on the triplets
might be ok, worst case you might need some small wheel spacers, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 yeah, probably not gonna do that then. I think I'll stick to 155 or 165 (read that the diesel versions had 165)
Hi thanks for your vids majic could you help just seen a set of alloys 15" 4x100 4 stud come of a vauxhall corsa would they fit the 107 ??if they do i wil jump at them £150 thanks Pete He just came back to me with there 6,5JX15H2 ? now realy lost :(
it all depends on the offset, the et, and the centre bore diameter, from what I can see the corsa runs wheels which are et39-40 and centre bore is 65.2mm so I think wheel spacers and extended nuts would also be needed, Thanks for the great comments👍🏻👍🏻🛠
Do you need to recalibrate the speedometer now you have bigger diameter wheels?
You cant alter the speedo readings, the diameter on this tyre size is almost identical so no need, Thanks for the great comments👍🏻👍🏻🛠
So the weels are 4X100. So i can put weels from vectra b 1996. I have some nice weels 15'. You think i can put 195 50 15 tire?
Don't forget about the offset ET & centrebore Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 i know, this weel are much langer and i must try to see if arch will be ok. ET
Will 16" rims fit on my Peugeot 107 or are they to big?
you can fit 16" but you will also need skinny low profile tyres,Thanks for the great comments👍🏻👍🏻🛠
Do you know if Peugeot 206 alloy wheels would fit the 107 model, The wheels were 15 inches and good quality so i was easy prey for this garage that runs a criminal racket.
is it the thread that's 35mm or the whole bolt itself? i can't seem to find any bolts with m12 35mm at all. all i find is m12 28m,m
Are you fitting the same wheels, ats cups, if you are fitting a different brand they may need different bolts, the 35mm is the thread length Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 it has the same offset, but i cant find the bolts. my rims are 185 r15 with a 35 ET
The list in the description of all the cars. Is that a list saying the wheels on those cars will fit the c1/106/aygo ?
The list shows the cars with the same fitment, but as in the video you need to get tyre size and wheel spacing correct, thanks for the great comments 👍🏻👍🏻🛠
aaanton11 thanks 😁 great help
I have a set of alloys off a Corsa 185/55/15 can I put there on a 107 ?
They might work, give it a go, let us know how you get on Thanks for the great comments👍🏻👍🏻🛠
Hello mate, probably you the only experience person that can help me right now. I’m buying an aftermarket alloy wheels that has fitment as follow:
Wheel Size: 15x7
Color: Flat Black
Bolt Pattern: 4x100
Offset: +35mm
Centerbore: 73.1mm
Would that fit my Aygo 2006!?🙏🏻🙏🏻🙏🏻
It will be close to the suspension leg, if too close a small spacer could be used so no big issues Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 thanks
Iv got the c1
Nice!!! Thanks for the great comments👍🏻👍🏻🛠
Do you still have the apex 35 mm lowering springs fitted? Wondering how they hold up after 5 years? Still going good? Any issues?
good as gold love them, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 : Thanks again. The handling got visibly better. How is your experience with uneven roads, potholes, and speed bumps? Did you observe a significant difference?
@@sayanpal9491 Potholes are the reason I'm considering a larger wheel. Did they help in this respect?
@@BrownDaddy007 :Not really. Small wheels which thicker tyres are better to handle potholes
@@sayanpal9491 Yes, this is what I want, a thicker tyre on my wheel. If I could fit them on my original 14R wheel, I would. I have some concerns about mpg, and speedometer inaccuracies in such an event, however.
Hello...... do you think these cars can take 13" wheels?
yes definitely, they look great eurostyle, Thanks for the great comments👍🏻👍🏻🛠
could u do a video on how to change the bushings in the gear shifter, mine wobbles about like fuck
Ok will do when one arises 👍🏻👍🏻🚘
hi it's possible i'm using tire of 175/65R 14 for my puegeot 107 2013
Thanks for the great information👍🏻👍🏻🛠
Hi mate, do you know if the c2 vts alloys will fit my daughters c1 please
I think they are different, double check the pcd and et Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Gutted they are a different pcd c1 is 4x100 and c2 is 4x108
That was a great video and the editing 👌 to see the difference in ride height 👏
One other thing : are you sure you have those wheel dimensions correct in the later part of the video? I emailed ATS as I can't find any 6Js in a 15". They replied that they never made the Cup in 6J 15", the 6J is only on a 14" wheel with an ET33 offset and 57.1 mm bore. The 15" is a 7J with an ET28 offset and 57.1 mm bore. There is no ET35 Cup.
???
The dimensions are correct, the wheels are ATS cup juniors, and they are no longer available. I found another set on eBay last week, so they are about still.
Thanks for the great comments 👍🏻👍🏻🛠
@@aaanton11 fyi I've since received a follow up email from a Johann Schmidt at ATS. Upon further investigation they did indeed make a Cup in 6x15 ET35 but "it's been out of production for decades, but we never sold it as a Cup "Junior", it has always been just "ATS Cup"" . So the wheel does exist (apologies for earlier comment, although in my defence it was based on their initial reply from a different staff member), however it still remains that there is no such thing as an ATS Cup Junior, so that may have just been something that some random guy made up years ago and it's been reposted as fact ever since. Just thought I'd clarify for the benefit of anyone reading who may be looking for these ficticious Cup Juniors.
That is cheap for those bolts.I'd go with the 25mm lowering springs,just for the hassle of speed bumps out there.
They were a great buy, and fantastic quality, Thanks for the great comments👍🏻👍🏻🛠
The same engine goes for peugeot, aygo, and C1?
yes, they are the same car just body shaped different, Thanks for the great comments👍🏻👍🏻🛠
How cheap is the cost of running and reliability?
I think for money, the AYGO/c1/107 are the cheapest most reliable car on the road. Thanks for the great comments 👍🏻👍🏻
Should my Clio 15 alloys fit my c1
They might, you need to check the numbers on the wheels, like in the video and the information comments, thanks for watching 👍🏻👍🏻
Does this not evaluate insurance as a modification?
You can inform your insurance if you wish, but as some models came with alloy wheels, I have never had an issue Thanks for the great comments👍🏻👍🏻🛠
195/45/16 tyre's and wheels off a civic and idea if they will fit?
It depends on the et, it would be really close with the 195 tyres, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 after a bit of research considering the roads I drive I have found 14 inch to be more suitable 6j et38, I'm going to have a go at hydro dipping them soon. 👍
would 175 55 15 on
5.50 Jx 15
4x100
ET 45
fit the 107 ??
I think it might be close, nothing that a small spacer would sort out, it’s the et 45 might be close to the front strut, 👍🏻👍🏻let me know if you get them and they fit👍🏻👍🏻
R15-50-175
Did you have to buy tyre pressure monitor sensors for the new alloys or do C1’s work off of the ABS indirectly instead?
They don’t have tyre pressure sensors, not on this year 👍🏻👍🏻Thanks for watching 🚘🚘
aaanton11 Great Thanks!
Tire pressure sensors!! In a car many times sold without power windows, AC, electric mirrors. heated seats and a vast, etc. If course tire pressure sensors would be the first choice! LOL 😂
mate where do u live i will pay u to work on my c1 hahaha
Thanks for watching, 👍🏻👍🏻🚘🚘
do you do work for people, think i need a clutch :)
Thanks for your comments, I am sorry I am too busy to take on any more work 👍🏻👍🏻
So you actually fitted the eibach and the apex springs?
Thanks for the comments, no I did not fit the springs, just compressed the car down to the stated ride heights, to allow you to see what you prefer. 👍🏻👍🏻
aaanton11 how?
350kg of weights 😂
Who was the eBay seller again?? 👍🏻🚙
Wheel bolts extended 16 x M12 x 1.5, 35mm Thread, Radius Wheel Bolts (Silver)
eBay seller alloy-wheel-solutions.co.uk
Thanks for the great comments👍🏻👍🏻🛠
did you mention this on your insurance?
Its up to you, most don't in my experience, Thanks for the great comments👍🏻👍🏻🛠
THE GRAY WITH 7 ARMS ARE MORE PRETTY .... SEEN IN OTHER VIDEOS
Thanks for the great comments👍🏻👍🏻🛠
They're wheel bolts, not nuts!
😂 sorry, Thanks for the great comments👍🏻👍🏻🛠
🇺🇦👍👏😃
Thanks for the great comments👍🏻👍🏻🛠
I am an anti wheel nut user 😂
Thanks for the great comments👍🏻👍🏻🛠