This is fantastic and super educational. I have spent lots of time trying to locate root causes that prevented my 2011 328i passenger side low beam from operational. I do not know yet if I can solve the problem but do feel satisfied learning from you. Thank you.
Do they really run the high beam as a daytime running light in the US? Or is that duty cycle very low like on the scope for daytime running lights and full noise for high bean? Solid insight as always Sadel.
@DTEAuto otherwise you'd be driving around, pissing a lot of people off. Lol. Not sure why you would even have drl's option turned on with Halogens and auto-lights. Just burning expensive bulbs.
@ do you have a video of it by any Chance .. many thanks in advance. I’m hoping to install a fresh pair on my dads x3 when I go to Mexico 🇲🇽 for the holidays . I got a general idea of it but I just wanted to see if there is a shortcut or something to get those rear bracket screws that hold on to them
I have replaced a second-hand e90 frm module, same case. Different vin no, I don’t use read & write mcu, just use my 908s pro to do online coding, perfect done
I have a similar issue mines are hid when i turn the lights on only the passenger turns on unless I disconnect the connect for that headlight and wait 10 second then the driver will turn on . Reconnect it and both work i could turn the car off and on about 3 time before it stops working
Great video. Always learning here. Thanks for taking the time to share.
Glad it was helpful! and thank you for watching
This is fantastic and super educational. I have spent lots of time trying to locate root causes that prevented my 2011 328i passenger side low beam from operational. I do not know yet if I can solve the problem but do feel satisfied learning from you. Thank you.
Great to hear!
Sadel is the real deal!! Thanks for fixing my E83!
Thanks for entrusting me and glad it worked out!
Finally another video I get to learn something new! 🤟🏾😂
exelente diagnostico te felicito desde henderson texas
Do they really run the high beam as a daytime running light in the US?
Or is that duty cycle very low like on the scope for daytime running lights and full noise for high bean?
Solid insight as always Sadel.
I didn't get a chance to check but I'd say you are correct because that would be the only way to change the intensity
@DTEAuto otherwise you'd be driving around, pissing a lot of people off. Lol.
Not sure why you would even have drl's option turned on with Halogens and auto-lights. Just burning expensive bulbs.
Perfect diag .thank for this video.
Great job! Seems like you were able to remove the headlights without removing the bumper on this e83, or?
Yep, no bumper removal necessary on this model!
@@DTEAuto do you have a video of that ? I wanna replace them on my 2006 x3
Quick question… are you able to also take out the headlight without removing the bumper also on 2006 x3 model?
yes
@ do you have a video of it by any Chance .. many thanks in advance.
I’m hoping to install a fresh pair on my dads x3 when I go to Mexico 🇲🇽 for the holidays .
I got a general idea of it but I just wanted to see if there is a shortcut or something to get those rear bracket screws that hold on to them
good job , great video, thanks Sadel
Glad you enjoyed it
👍
Super job, Sadel!
Brilliant video
👍
CANNY, DTech Engineering Sadel
From Nick Ayivor from London England UK 🇬🇧 ⏰️ 22:05pm
thanks!
I have replaced a second-hand e90 frm module, same case. Different vin no, I don’t use read & write mcu, just use my 908s pro to do online coding, perfect done
this light module isn't able to be recovered that way like an frm
Got a 2004 x3 tryna turn off daylight..how
Flash and eeprom are two different chip !!!
Are you read and write both of them
?!!!
This is MC9S12XDP512 which is an mcu that has virtual eeprom in it and has flash as well
I have a similar issue mines are hid when i turn the lights on only the passenger turns on unless I disconnect the connect for that headlight and wait 10 second then the driver will turn on . Reconnect it and both work i could turn the car off and on about 3 time before it stops working
Best thing would be is if you can get it scanned for any related trouble codes