Marty, you have reached a whole new level when it comes to creating content people care about. That was not just a masterful build, but a masterfully told story.
I just rewatched this for probably the 4th time. I finally built mine using an ascend fs12 kayak. It is so much fun and better than paddling to the fishing spots. Thankyou for your awesome videos!
@@ScottLiberty1110 look, another asshole that wants to make everything political. The thumbs down were for the lengthy intro and not seeing the motor run. But sure. Keep pushing your political bullshit everywhere
@@richardmyhan8755 It's actually much worse. When you register a vehicle or vessel, you literally hand ownership to the Queen of England. I thought it was a joke till I looked up my shit. There was my van, all my motorcycles (except track bikes never for the street) and my Gheenoe. Everything is a lie but people.
Inspiring to watch you living the dream! I'm hooked on your devotion to diy. This is only the 2nd video I've watched, beside your outstanding Pelican 12x3. Totally stoked!
You're a kayak modding Rock Star! I particularly liked the comment below about you being the "Diresta of kayak mods". I definitely agree! A pleasure to watch as always. : )
Just started watching your channel. Amazing stuff, Marty! I look forward to watching more of your content from past to present. I love your creativity!
I've been a follower since you first started this channel. And I'm still amazed at the things you put together. What an inventive mind. Congratulations on all your success.
Great Build, reminds me of myself outfitting a 15' Scot Canoe Kevlar squareback with a 6 hp Evinrude plus the 3 gallon tank. Made a cooler seat to adjust the trim by sliding back and forth to find the sweet spot. Also made a tiller extension with a internal button extension to kill the button on the end of handle. That was in 1986 when I was 36 years old. Forward 34 years just got another Kevlar squareback canoe and power it with a much tamer 3.5 Mercury which will hit 12 mph with me and my little grandma up front. Little boats with small motors will take you to some very magical spots. Always wear your jacket and kill switch please.
So much visible effort to making this video, and an obvious respect for the things that helped him make it. What a genuine guy, earned yourself a sub. Keep up the amazing content!
Fantastic build! And I must say, the way you film and edit your videos makes them a pleasure to watch. I usually just scroll through long videos, but not yours. Keep up the great work!
Cool video, I've wanted to hang a motor of the back of my kayak for a while, this is the best conversion video I've seen, makes the job look a lot easier.
Great video man! Glad it worked out. Your film crew and editors are awesome as well. The best part is how you thanked everyone in the end, truly humble and grateful. I believe you will continue to be blessed. New Sub Thumbs up.
superb job, I tried this with no success, one thing I suggest through my trials, is outrigger stabilizing pontoons in case of wave action from disrespectful boaters
Brother, i dont comment much on videos, but.....your work and creativity is just inspiring. I've see the "poor man's kayak" beginnings and glad to see you still have that creative drive even though you dont need the "poor man's" yak.
I respect a guy that can eye ball, free hand cut, and drill, and it all goes together not to mention card board blue prints. Amazing stuff! I wasted so much time learning Machine Shop. LOL Great job I enjoyed it a bunch.
hes the definition of a smart hold my beer florida man, crazy ideas that involve slapping a motor onto anything that floats but he uses actual science and makes an industrial level of quality build
It looks incredible man. Hard work very detailed and STURDY AS HELL LOL. When I think of something being professionally built, this is what I picture. Boat and kayak manufacturer's can't touch the job you just did. AWESOME MAN 👍
You are an amazing Kayak builder, designer, and visioner. I am very impressed with your skills, talents, and abilities. Anything is possible if you put your mind to it and not only that, you have all the tools and materials to complete the job. You made it look so easy when you put everything together and the tools you have really made the job done faster in less time and effort.
Cool! My first boat was a 17 ft fibreglass canoe with a 1948 6hp Johnson Seahorse on a side mount. Scary as heck on the St.Lawrence but bugs in my teeth smiling. Cheers
Very cool project. Lost track of you for a couple of years but two days ago I was watching a guy evaluate some kayaks and he mentioned your name. Was really happy to relocate you again. Keep it up.
Lol, hit send by accident. Love watching you. I'm about to purchase my kayak for summer 2021, and will have some type of motor. Not a fisherman, but love being out in the water. You inspire so many people. God bless my friend. Love your "boat home" dog's, glad thing's have worked out for you. Be safe!🙏
Amazing! I'm hoping to strap a small outboard on a pair of old paddle boards. Your sliding chair is a genius solution to the problem of how to set the trim! You've got a new subscriber :-D
Nice work I just bought a Saturn "Kaboat" and that looks like just the motor I want. Looking forward to a sweet spring and summer and wish the same for you and all come by this way.
So cool man I enjoy watching a good invention/fabricating video like this, it got me excited👍 just picked up a new mercury 3.5 yesterday and I’m already getting ideas🤣
I once told a boss all the best jobs I ever had were ones I could do barefoot. Another perfect example,LOL. 14-16 mph has to feel like 30 when you sit so low , you did a great job especially with the sliding seat.
@@dylanzrim1011 yeah, he mounted his to his outrigger though. No where near as much effort or ingenuity as what Marty did. But still effective. That guy does some crazy stuff with that sea kayak, Off shore big time! Fishing. He's one of many I subscribe to.
Just make sure your kayak is rated for that much hp or your gonna have problems when checked by Coast guard, Marine Patrol, Sheriffs etc. Also in most states have yo be registered.
Man Marty, it is a pure pleasure watching your videos. I wish you were able to make video every day, but I will take what ever you have available. Take care Marty, good health, and much happiness. P.S. love your dogs.
Well, aside from the extraordinary imagination and frabrication skills Marty, the video kept me in stitches. Amazing editing, filming and well, Bill Dance got nutin on you.
Awesome video, tools, skills!! I felt awesome once when i cut my wife's plastic pail using scissors, failed my diy project and i didn't run when she got home.
When you were building it I was thinking “why does the seat need to move” and then later you explained why you did all the special things you did. That’s awesome.
Marty, you have reached a whole new level when it comes to creating content people care about. That was not just a masterful build, but a masterfully told story.
All those power tools and never a shoe worn. Amazing! Nice build sir
Darren V. Florida boy!
Florida mans getting the job done
Safety is for wimps.
I work alone on full remodels. My boot of choice are flip-flops. Florida will do that.
Just how it should be
I just rewatched this for probably the 4th time. I finally built mine using an ascend fs12 kayak. It is so much fun and better than paddling to the fishing spots. Thankyou for your awesome videos!
I can't believe some people actually got thumbs down this was an awesome original build
POS Libtards more than likely :)
Theyre just jealous
I agree. Most likely unhappy, grouchy and simply folks that absolutely nothing will please.
@@ScottLiberty1110 look, another asshole that wants to make everything political. The thumbs down were for the lengthy intro and not seeing the motor run. But sure. Keep pushing your political bullshit everywhere
@@ScottLiberty1110 Why would you bring politics into this..??
True artist with tools and with the camera. Thanks for another great video Marty!
Don’t let fwc catch you without registration.
@@jasonalred6012
Cuz the Gangsters want their cut!
@NPC #34254334 Response: if it has a motor in Florida you do have to register.
Jason Alred yep, feds have their hands in just about everything. I have to deal with Customs regularly with my job and the stories I could tell....
@@richardmyhan8755 It's actually much worse. When you register a vehicle or vessel, you literally hand ownership to the Queen of England. I thought it was a joke till I looked up my shit. There was my van, all my motorcycles (except track bikes never for the street) and my Gheenoe. Everything is a lie but people.
Inspiring to watch you living the dream! I'm hooked on your devotion to diy. This is only the 2nd video I've watched, beside your outstanding Pelican 12x3. Totally stoked!
You never fail to amaze...great job...I learn a lot from seeing how you engineer things...thanks
Very well done and you respect the safety aspects of your build. Love your innovative ideas and we can all learn from this.
Man, I’ll bet that Pelican management gets a kick out of seeing you turn the Catch 120 into a mini skiff....clever idea Marty.
You're a kayak modding Rock Star! I particularly liked the comment below about you being the "Diresta of kayak mods". I definitely agree! A pleasure to watch as always. : )
A+ Cinematography!
Haha! I have that Costco pool table too!
You're driving like a Cambodian needle boat boss! Now lets work on getting it up to 25mph!
@@philais aaand a steering wheel
Just started watching your channel. Amazing stuff, Marty! I look forward to watching more of your content from past to present. I love your creativity!
Who else wishes this guy was your brother so you could hang out with him all the time😂😂
Me too!
me lol
🙋♂️
Me
GreenMountainKid28 UA-cam comments might not be the place to find comfort.
Great video. I especially like the fast forward parts it keeps the video interesting throughout the entire build.
I've been a follower since you first started this channel. And I'm still amazed at the things you put together. What an inventive mind. Congratulations on all your success.
14:17 The other boater says, "I just crossed the wake of a ... Kayak??"
🤣🤣🤣🤣
Great video man always a joy watching you work and having fun on the water
Some serious: camera handling, video editing, imagination, designing, tools handling.
Subbed+liked
@Luke Colwell ok
That dude is serious! What a talented rigger. Great concept! Very informative, inspiring . Lots of smiles watching this presentation.
whoa
Amazing footage, really appreciate how much work goes into your videos
Great Build, reminds me of myself outfitting a 15' Scot Canoe Kevlar squareback with a 6 hp Evinrude plus the 3 gallon tank. Made a cooler seat to adjust the trim by sliding back and forth to find the sweet spot. Also made a tiller extension with a internal button extension to kill the button on the end of handle. That was in 1986 when I was 36 years old. Forward 34 years just got another Kevlar squareback canoe and power it with a much tamer 3.5 Mercury which will hit 12 mph with me and my little grandma up front. Little boats with small motors will take you to some very magical spots. Always wear your jacket and kill switch please.
So much visible effort to making this video, and an obvious respect for the things that helped him make it. What a genuine guy, earned yourself a sub. Keep up the amazing content!
Wow, you're the "McGyver" of kayaks!! Appreciate the ingenuity and love the creative ways you fine tune these yaks.
your videos are always so zen and wholesome and inspiring. Thanks man
Fantastic build! And I must say, the way you film and edit your videos makes them a pleasure to watch. I usually just scroll through long videos, but not yours. Keep up the great work!
The Jimmy DiResta of Kayak mods. I like it!
@Tyler Studstill - different guy. There are a few of us out there. :)
Dude you are a damn genius! No half ass here, this was a legit build. Awesome video....
absolutely excellent work mate . Thanks
from Australia
Your attention to detail and craftsmanship are amazing
Cool video, I've wanted to hang a motor of the back of my kayak for a while, this is the best conversion video I've seen, makes the job look a lot easier.
PPX websites for
Why would you buy a kayak and want to put a motor on it? Why not just buy a flat back canoe or a jonboat?
Rattlerjake1 because my yak runs in 6 inches of water, and my long tail runs in 7. I’ve been places no boat has even dreamed of.
Love it!! U make it look so easy and just so simple to add things on lol
Great video man! Glad it worked out. Your film crew and editors are awesome as well. The best part is how you thanked everyone in the end, truly humble and grateful. I believe you will continue to be blessed. New Sub Thumbs up.
superb job, I tried this with no success, one thing I suggest through my trials, is outrigger stabilizing pontoons in case of wave action from disrespectful boaters
Brother, i dont comment much on videos, but.....your work and creativity is just inspiring. I've see the "poor man's kayak" beginnings and glad to see you still have that creative drive even though you dont need the "poor man's" yak.
Looks like a blast! Marty plus an unlimited supply of Starboard is a dangerous thing!
I respect a guy that can eye ball, free hand cut, and drill, and it all goes together not to mention card board blue prints. Amazing stuff! I wasted so much time learning Machine Shop. LOL Great job I enjoyed it a bunch.
hes the definition of a smart hold my beer florida man, crazy ideas that involve slapping a motor onto anything that floats but he uses actual science and makes an industrial level of quality build
Your skills are remarkable. 14 to 16 mph in a kayak is flying! Well done.
the footage quality and editing of this video is genuinely worldclass
IS F@UCKEN NOT
@Luke Colwell It's bloody beltin actually.😁🤸🍾
@Luke Colwell need a Tampax?
@Luke Colwell why are you two speds even having this argument lmao
It looks incredible man. Hard work very detailed and STURDY AS HELL LOL. When I think of something being professionally built, this is what I picture. Boat and kayak manufacturer's can't touch the job you just did. AWESOME MAN 👍
Blessed and Living ... This video was Amazing!!.. Thank you so much .. Sweet build.. That's talent!!
Another great video Marty, love the content
The cinematography on this is SO GOOD
very cool ! Your a real Artisan, Thanks for all your hard work and sharing with us.
You are an amazing Kayak builder, designer, and visioner. I am very impressed with your skills, talents, and abilities. Anything is possible if you put your mind to it and not only that, you have all the tools and materials to complete the job. You made it look so easy when you put everything together and the tools you have really made the job done faster in less time and effort.
Zoffinger back at it again with a great build. One of the finest Artist innovator's in the kayak world.
I did stuff like that in my teens, boy do I miss those days. Keep living man, you rock
AWESOME build! Such creativity that went into this as well! KUDOS!
I just saw this. My man you are a genius. Truly. With this you earned my respect. And I subbed. Truly ballsy to have 5hp on a small craft. Awesome
I clicked on this thinking it’d be a motor slapped on a kayak but no. It was way more then that
Ya those are glorified paddle boards.
Than
@@bipedalhominid6815 To fair there were a lot of things that happened, then a motor was slapped on at 10:56...
The transom itself was pretty impressive
WOW That is the fastest Yak I have ever seen. You come up with some crazy stuff.
Probably the best video I’ve seen on the internet. Thank you!
i love an inventive mind together with construction ability. Great video. Thankyou for posting.
As a carpenter craftsmen myself I'm amazed at the ingenuity you have this isnt something average Joe is going to create great work man true craftsman!
That looks like a blast! Good stuff as always.
Dude that came out awesome!!! very genius. I'm about to buy my 1st kayak and I'd love to do exactly the same.
I had no problem imagining that would operate well with the kayak being that long. Nicely done.
Tune in next week when Marty upcycles an old paraglider motor onto a kayak, creating the world's first airboat-yak!
Are you trying to get the man killed? STOP!
Great! My son and I were just planning this idea this morning. 👍
Always enjoy your videos, that’s why I have now subscribed! I also love messing around in workshops!
This was very cool! Nice build😉👍
Man I love your operating table! Genius!
Cool! My first boat was a 17 ft fibreglass canoe with a 1948 6hp Johnson Seahorse on a side mount. Scary as heck on the St.Lawrence but bugs in my teeth smiling. Cheers
Very cool project. Lost track of you for a couple of years but two days ago I was watching a guy evaluate some kayaks and he mentioned your name. Was really happy to relocate you again. Keep it up.
Lol, hit send by accident. Love watching you. I'm about to purchase my kayak for summer 2021, and will have some type of motor. Not a fisherman, but love being out in the water. You inspire so many people. God bless my friend. Love your "boat home" dog's, glad thing's have worked out for you. Be safe!🙏
A+ for Craftsmanship, A+ for Creativity!
That grin when you first twisted the throttle was priceless!
One of my all-time favorites! Very entertaining!
What a satisfying video watching the build in Fast forward, I loved it !!
Amazing!
I'm hoping to strap a small outboard on a pair of old paddle boards. Your sliding chair is a genius solution to the problem of how to set the trim! You've got a new subscriber :-D
Just a thought....
Pedal steering, and squeeze throttle.
Great build, thanks for sharing 👍
Nice work I just bought a Saturn "Kaboat" and that looks like just the motor I want. Looking forward to a sweet spring and summer and wish the same for you and all come by this way.
Awesome build! Looks like a lot of fun
If I put as much effort into my life as Marty does into each project I’d be a lot better off right now...
Ha ha ha ha ha ha! Me to!
Amen
Guy H. But hole
The shots from the circlular saw POV - effing genius!
So cool man I enjoy watching a good invention/fabricating video like this, it got me excited👍
just picked up a new mercury 3.5 yesterday and I’m already getting ideas🤣
You are quite the inventor, I am just crazy enough to try that one out. Great video.
8 days later and I still haven't picked my jaw up off the floor...amazing!
6:51 had me laughing out loud. Too funny, you got my sub!
Agree with Hank on that one. That's some awesome stuff you got going on. Well done!
i just love it when thrs more work showcase and less words.. very nice
I once told a boss all the best jobs I ever had were ones I could do barefoot. Another perfect example,LOL. 14-16 mph has to feel like 30 when you sit so low , you did a great job especially with the sliding seat.
Hey kids! It’s still a really good idea to wear closed toed shoes when using a circular saw!!
MARTY "BECAUSE I CAN" ZOFFINGER DOES IT AGAIN
Awesome video brother ! Even more awesomer build!!
Amazing building ideas. Keep up the great work
That opens up a TON of new fishing areas to explore!
14-16 mph can cross some serious water quick
Key west kayak fishing did it to a hobie
@@dylanzrim1011 yeah, he mounted his to his outrigger though. No where near as much effort or ingenuity as what Marty did. But still effective. That guy does some crazy stuff with that sea kayak, Off shore big time! Fishing. He's one of many I subscribe to.
Just make sure your kayak is rated for that much hp or your gonna have problems when checked by Coast guard, Marine Patrol, Sheriffs etc. Also in most states have yo be registered.
I'm 5 minutes into my first zoffinger video. I'm partly amused, partly intrigued and (I think) addicted!
same thing happened to me, literally stumbled onto this video. marty grabs your attention and holds it , not unlike a cold beer. cheers.
dude you are awesome. fantastic work my man!
You did a really good job designing this modification. Definitely seems more involved than a hold my beer production.
Man Marty, it is a pure pleasure watching your videos. I wish you were able to make video every day, but I will take what ever you have available. Take care Marty, good health, and much happiness. P.S. love your dogs.
Next... pls do a 15hp or 25hp 👍🏽 You could add a couple of short outriggers down back for stability and ballast 👌🏼
I am a kayak bass fisher. My head just exploded seeing the 5hp motor on there. Wonderful. Just fun. You keep doing you.
Great workmanship ,what a great talent you have!!!💪💪
While your video project isn't a how to, it's still interesting to see that adding a motor can be done with a little elbow grease and creativity.
Well, aside from the extraordinary imagination and frabrication skills Marty, the video kept me in stitches. Amazing editing, filming and well, Bill Dance got nutin on you.
Awesome video, tools, skills!!
I felt awesome once when i cut my wife's plastic pail using scissors, failed my diy project and i didn't run when she got home.
Insane build, great job!!
When you were building it I was thinking “why does the seat need to move” and then later you explained why you did all the special things you did. That’s awesome.
That is freakin awesome, i saw your vid with the stabilizer and am planning on getting some and a 1.2 hp motor for my 2 man inflatable
Man that's just plum awesome, thumbs-up, I really enjoyed that video.
I don't know how I came across your videos but I'm glad I did keep up the good work