Your video helped us so much. Thank you for explaining about the "1st" and "2nd". I thought it meant the 1st station, and the 2nd station and the 3rd and 4th stations, and I was going crazy trying to figure out how to add my 5th station, 6th, 7th and 8th. But YOU are the only one who explained that the 2nd and 3rd, etc, meant setting up additional times to start the watering a 2nd, 3rd time that same day. Thank you, thank you. You are a genius!
Your instructions were great. Showing what buttons do what, showing what you see in the screen as you made each entry, and telling me what you were going to do and then talking thru actually doing it while I watched. Extraordinarily well done!
Your tutorial is greatly appreciated! Thank you. I've never had an irrigation system. The Rain Bird manual just didn't make it easy to understand like watching your video.
Thanks for the explanation of this system, I was lost about the second start time on the same day, I was about to add program B and C for my second and third start times.
Hey man, just used your video to program my ESP-TM2 timer. It is a brilliant little video. I looked at 20 different ones and yours is THE VERY BEST. Thank you so much
What if I have two stations or zones that I want them to start at different time here there is only duration for zones but the start time is not for individual zone so how I would do it , let’s say I want a zone to start at 8:00 till 9:00 and the other zone start from 11:00 to 12:00 how to do it? Yes there is multiple start times but it’s not for specific zone I’m confused really, there was oldest version of this controller and I find it more easier when it comes to start time for zones individually
So I followed your steps, my program is running for the days I selected however, when I select manual watering my sprinklers don’t come on. The symbols show that it should be getting watered however they’re not producing water. Troubleshooting here for first time homeowner
How do I program my stations to run at different times? I only have 3 stations but it’s not enough water pressure so I have to alternate the times between stations. Thank you in advance
They don’t start at the same time if is set up to start at 5am - station 1 will come on 5am and station 2 will come on after 1 is done not at the same time
Mine was running ok, it started out with 6 zones, but only 5 zones were setup to water, for some reason only 4 are running, and I can’t find or even see the other 2 zones which is zone 5 and 6, so no w only zone 1 to 4 are watering and there should be 5 zone, and zone 6 was never setup from the start, but it was visible. So how do I get my zone 5 visible again up and running❓ Thank you‼️
Hallo mein Bester, ich habe mir RAIN BIRD ESP -TM2 (Mit Knopf) gekauft. Ich habe nur zwei wasser ventiele. benutze ich nur den A und B. Wie mache ich das in Program A ein mal am tag Gießen solte in Blumen feld 1, 45 min . und an den gleichen Tag in Feld 2 Beume Gießen solte in Program B 45 min. Aber am nächsten Tag die selbe Spiel aber pro feld 30 min. Danke
Usually programs don’t run at the same time if you set program A start time at 5am program B start time has to be different time. Program B and C is only use to water an e specific area less or more times
I beg to differ. Programming is logical and quick. forget the manual. Just follow these simple instructions and you are set. In my case, the Seasonal Adjust is an overkill but if you want to fiddle with it, just remember that you have done adjustments to it. Put a sticky note on the unit so that you can reset when you are finished with it.
I don't get what the Program A, B and C os for. I think they arw different prgrams that you can save, but not sure how to get the program to run which one you choos to run. For example, i want a program to run even days and then i want a program to run Tuesday and Saturdays, and then a program for everyday. It all depends on the seasons and water restrictions. This is hard to figure out.
I hate these things so much. I've had 2 of them, and neither one worked at all. so overly complex and finicky - total garbage. I know many of my neighbors have them too, so you can see them putting out a hose and sprinkler when their lawn needs water. Don't buy one of these. Complete garbage. They just don't work.
😂😂😂 Joe who installed them for you? My boss has one like this and its been three years and it's working,maybe the guy who installed did something wrong it can be tricky
i install 6 of them every day on new houses and never had any problems thay all been working for over a year now with no problems. but maybe yours was defective from the factory. cause its a good brand that has bedn here for years.
Your video helped us so much. Thank you for explaining about the "1st" and "2nd". I thought it meant the 1st station, and the 2nd station and the 3rd and 4th stations, and I was going crazy trying to figure out how to add my 5th station, 6th, 7th and 8th. But YOU are the only one who explained that the 2nd and 3rd, etc, meant setting up additional times to start the watering a 2nd, 3rd time that same day. Thank you, thank you. You are a genius!
Exactly!
Same!!
Same here!
Same…
Your instructions were great. Showing what buttons do what, showing what you see in the screen as you made each entry, and telling me what you were going to do and then talking thru actually doing it while I watched. Extraordinarily well done!
Some of us get overwhelmed with this kind of technology, this tutorial is very well explained.
Thank you.
More thorough than a lot of other videos. Thank you sir.
Excellent tutorial. Just the facts spoken and illustrated as the presenter moves around the dial touching the relevant buttons.
My programmer, somehow, has a setting on program B. I already have program A set. How do I delete program B?
Thank you for this video, it was very helpful! Finally, I understand how this works.
Thank you, great explanation, I thought it was very complicated and was very stressed about it. Thank you for sharing with so much patience.
Thank you! This was very easy to understand and you gave the instructions very concise and I was able to manuever my system with your explanation!
These instructions were so clear and easy to follow. Thank you!
the most thorough tutoria;/ Thanks
Thank you for sharing. Bought a new built that has this exact irrigation system
You are a life saver……..I mistakenly set running time to run 3times a day. No wonder my bill has been crazy every month
Your tutorial is greatly appreciated! Thank you. I've never had an irrigation system. The Rain Bird manual just didn't make it easy to understand like watching your video.
Thank you for your video. You helped me a lot I just buy a new Home. This is new for me to appreciate it. thank you. 😅😅😅
Thanks for the explanation of this system, I was lost about the second start time on the same day, I was about to add program B and C for my second and third start times.
Hey man, just used your video to program my ESP-TM2 timer. It is a brilliant little video. I looked at 20 different ones and yours is THE VERY BEST. Thank you so much
Thanks for your tutorial, it was better than the Rainbird tutorial.
Thank you sharing. It was a great video and full of information.
THANK YOU, SIR! That really got me where I needed to be with my system.
Thank you very much for this!!! This is the best tutorial I’ve seen!
Super helpful; thanks for posting!!
So once you programmed to desired setting do you switch to auto or where do you leave the dial at?
So.. Do all the zones go off at once? Or does it go one at a time?
Your video helps me a lot Thank you
Thank you so much for this video. I misunderstood that you only need to set one start time.
Thanks very much for teaching ❤
Good video. Very informative!
Very helpful. Thank you!
Good suggest and tech❤
Thank you for making this video!!
Thank you. It was helpful.
Thanks alot it helps alot✅✅🙏🏻🙏🏻
What if I have two stations or zones that I want them to start at different time here there is only duration for zones but the start time is not for individual zone so how I would do it , let’s say I want a zone to start at 8:00 till 9:00 and the other zone start from 11:00 to 12:00 how to do it? Yes there is multiple start times but it’s not for specific zone I’m confused really, there was oldest version of this controller and I find it more easier when it comes to start time for zones individually
Great video helped a lot!
Thank you for the video. How do you know how many zones there are and where they are at?
Well said! Great tutorial
So I followed your steps, my program is running for the days I selected however, when I select manual watering my sprinklers don’t come on. The symbols show that it should be getting watered however they’re not producing water. Troubleshooting here for first time homeowner
Great video!
How do I know how many stations I have?
Once you program the watering cycle do you set back to auto ?
Yes, back to auto
For nevada in winter day is only 1 day a week for how many minutes do I program
Lifesaver!! ❤
Thanks
Thank you so much
Do all the stations cut on at the same time or one at a time?
One at a time.
Thank you so much.
How do I program my stations to run at different times? I only have 3 stations but it’s not enough water pressure so I have to alternate the times between stations. Thank you in advance
They don’t start at the same time if is set up to start at 5am - station 1 will come on 5am and station 2 will come on after 1 is done not at the same time
Small correction., off is during winter where we no need to water. Since the sensor is onn it won’t water during rainy days.
Exactly. Mine doesn’t have a sensor, so I have to use the OFF indicator 😊.
Mine was running ok, it started out with 6 zones, but only 5 zones were setup to water, for some reason only 4 are running, and I can’t find or even see the other 2 zones which is zone 5 and 6, so no w only zone 1 to 4 are watering and there should be 5 zone,
and zone 6 was never setup from the start, but it was visible.
So how do I get my zone 5 visible again up and running❓
Thank you‼️
Did you ever figure it out?
How do you turn off interval skip days?
Thank you!!
how to make other station work and other times
I only want A program. How do I make sure the B & C programs are off
Swing to program B & Cand make sure the start time has no time and the stations has no time
Hallo mein Bester,
ich habe mir RAIN BIRD ESP -TM2 (Mit Knopf) gekauft.
Ich habe nur zwei wasser ventiele. benutze ich nur den A und B.
Wie mache ich das in Program A ein mal am tag Gießen solte in Blumen feld 1, 45 min . und an den gleichen Tag in Feld 2 Beume Gießen solte in Program B 45 min.
Aber am nächsten Tag die selbe Spiel aber pro feld 30 min.
Danke
How do I get the AM to come up it just keeps saying 24hr. Other wise it’s great please help. Thank you.
Watch the video again. He shows how is done.
Why when I have reset it does it keep doing the previous schedules.
What press this button divided by your Area code, minus your street address. How simple is that? 😢
My rainbird dosnt start automatically. I dont no why?
Probably a pressure switch problem
Thank you!
helpful!
When we add a new program…it runs both programs at the same time. how do we fix that
Usually programs don’t run at the same time if you set program A start time at 5am program B start time has to be different time. Program B and C is only use to water an e specific area less or more times
Hi, do you accept business cooperation? About testing our smart sprinkler controller and making a video.
Sure. I can do that. I install and program a lot controllers throughout the year
@@Irrigationplus what's your contact information?
irrigacionyjardin@gmail.com
@@Irrigationplus I have emailed you
I beg to differ. Programming is logical and quick. forget the manual. Just follow these simple instructions and you are set. In my case, the Seasonal Adjust is an overkill but if you want to fiddle with it, just remember that you have done adjustments to it. Put a sticky note on the unit so that you can reset when you are finished with it.
I don't get what the Program A, B and C os for.
I think they arw different prgrams that you can save, but not sure how to get the program to run which one you choos to run. For example, i want a program to run even days and then i want a program to run Tuesday and Saturdays, and then a program for everyday. It all depends on the seasons and water restrictions. This is hard to figure out.
Mine works fine, but I have to watch a video each time I make an adjustment. No big deal
Thank you.....the rain bird videos are worthless.
I hate these things so much. I've had 2 of them, and neither one worked at all. so overly complex and finicky - total garbage. I know many of my neighbors have them too, so you can see them putting out a hose and sprinkler when their lawn needs water. Don't buy one of these. Complete garbage. They just don't work.
😂😂😂 Joe who installed them for you? My boss has one like this and its been three years and it's working,maybe the guy who installed did something wrong it can be tricky
I have a rain bird and mine works just fine.
i install 6 of them every day on new houses and never had any problems thay all been working for over a year now with no problems. but maybe yours was defective from the factory. cause its a good brand that has bedn here for years.
@@jorgetorres7381 Maybe I got a bad one, or it was installed improperly.
I TOTALLY agree with you!!!
Very helpful, thank you!
Thank you!
Thank you!!!