Hey 👋 These are side steps not rock sliders to be clear 😄 I call them sliders but just so someone wondered they are not for bush bashing it is purely to get to the roof racks and if I go offroad it will offer more protection than the plastic steps in case I hit them 🤙🏼 if you do bush bashing get proper rock sliders 💯
Thanks for the vid mate. I'd seen these ages ago and wondered how they were. Seeing how far they hang down underneath the steps, they definitely look like they'd get ripped off pretty easily, or worse.
I put the Bushskinz ones on. Cost about $890 including delivery I think but really happy with them. Much better than the original plastic ones. Gives you a lot more confidence in the vehicle when going off road.
Hi Mate, Im looking at putting Bushskinz on an NX LWB but im worried that the mounting points on the vehicle look flimsy - what are your thoughts please
@@damion773 Never thought it was an issue. Seem to be nice and secure to me but I don't do any hard core off roading. One thing I can say is the Bushskinzs ones are a vast improvement over the crappy factory plastic side steps. PS if your factory side steps are in good order you can more than likely easily sell those on Market Place/Gumtree as they will fit straight on to earlier Paj models which had no steps at all. I was inundated with buyers when I advertised mine! Cheers.
They look neat and fairly priced for what they are. People need to understand you won't get comp quality rock sliders for half the price. It just defies logic. Jacking the car from the rock sliders is asking for trouble anyway and not recommended by any manufacturer.
@@dirtboy4x412 thanks mate Im glad you understand. Made the mistake of mentioning rock sliders yet it is only heavy duty or steel side steps really for me to get to the roof racks and worst case if I hit something offroad the sills will be ok. Not for bush bashing 🙂
Good budget protection but needs some more R&D I think. Looks too short (were these for the swb version?), needs grip tape on top, and also they aren't really sliders, you'll get hung up on the low hanging mounts and they'll bend up
@@fisherman6794 hey mate it may just be a little longer to the front but it is flush at the back. Not sliders they are heavy duty side steps rather 😃 and no they are for LWB only
they arent going to slide over anything with those brackets. Youd be far better off just attaching a sheet of flat steel, or a length of tube along the bottom of the factory ones to help it slide a bit better over obstacles. Cheaper too.
Hey 👋 These are side steps not rock sliders to be clear 😄 I call them sliders but just so someone wondered they are not for bush bashing it is purely to get to the roof racks and if I go offroad it will offer more protection than the plastic steps in case I hit them 🤙🏼 if you do bush bashing get proper rock sliders 💯
Thanks for the vid mate. I'd seen these ages ago and wondered how they were. Seeing how far they hang down underneath the steps, they definitely look like they'd get ripped off pretty easily, or worse.
It's really nice that you're on a LWB Pajero as it's way more relatable!
@@cowbee8865 loving it😍🔥
They look great! Enjoy the bucks trip 🔥
@@nicolepetzer4538 ❤️❤️
did you raised the suspension ? what size tires?
@@boogiedownbronx73 yes 2” and 32s
Since it doesnt have the diamond pattern wont this be super slippery when wet
@@TastyAzWhole yep will be
I put the Bushskinz ones on. Cost about $890 including delivery I think but really happy with them. Much better than the original plastic ones. Gives you a lot more confidence in the vehicle when going off road.
@@OzzyBattler4697 awesome mate 🙌🏼
Hi Mate, Im looking at putting Bushskinz on an NX LWB but im worried that the mounting points on the vehicle look flimsy - what are your thoughts please
@@damion773 Never thought it was an issue. Seem to be nice and secure to me but I don't do any hard core off roading. One thing I can say is the Bushskinzs ones are a vast improvement over the crappy factory plastic side steps. PS if your factory side steps are in good order you can more than likely easily sell those on Market Place/Gumtree as they will fit straight on to earlier Paj models which had no steps at all. I was inundated with buyers when I advertised mine! Cheers.
Is there a way to add a gas strut to the rear door?
@@piwi565 yep 🙂
@@budget4x4life waiting for you to show us how, master. Lol
What tools do I need for taking old ones off?
@@calumbarbour4953 watch the video again 😁
HI Thumb UP..Thanks
What site did you order these pedals from?
@@aymanalghahm228 budget4x4life.com
Hi are they strong enough to use hi-lift jack?
3mm single axis brackets. What do you think?
@@dirtboy4x412 Nope.
@@michal.mozdzierz nah mate🙂
They look neat and fairly priced for what they are. People need to understand you won't get comp quality rock sliders for half the price. It just defies logic. Jacking the car from the rock sliders is asking for trouble anyway and not recommended by any manufacturer.
@@dirtboy4x412 thanks mate Im glad you understand. Made the mistake of mentioning rock sliders yet it is only heavy duty or steel side steps really for me to get to the roof racks and worst case if I hit something offroad the sills will be ok. Not for bush bashing 🙂
You got your left and right brackets back to front. Drivers side is right hand side.
@@peterevans7364 if you have it like that you have your bolts exposed on the front so best this way so it has the metal lip that protects it 🙂
Do you sell rock sliders please? Like the Dirt Boy 4x4 units?
Only for SWB
Good budget protection but needs some more R&D I think. Looks too short (were these for the swb version?), needs grip tape on top, and also they aren't really sliders, you'll get hung up on the low hanging mounts and they'll bend up
@@fisherman6794 hey mate it may just be a little longer to the front but it is flush at the back. Not sliders they are heavy duty side steps rather 😃 and no they are for LWB only
they arent going to slide over anything with those brackets. Youd be far better off just attaching a sheet of flat steel, or a length of tube along the bottom of the factory ones to help it slide a bit better over obstacles. Cheaper too.
@@SouthlandFlyer not a slider mate just a side step cause ill be touring not bush bashing🙌🏼
Need these for the swb...
@@alwynvanderlinde9507 we custom make them for the swb 💯
@@budget4x4life available on website??.
Very clean install.
Pitty the ZAR is monopoly money.
$700 shipped. 😢
@@stephencelliers9127 eishhh
Hey, I would love to get the old one!
@@ibrahimwaizanii email us
Lekker Boet
@@briandp9535 dankie man