The Science Behind Cold Air Intakes!!
Вставка
- Опубліковано 18 кві 2021
- Performance - bit.ly/3laNYDa
Sign up for our Newsletter! - bit.ly/3k7GNuX
Wheels + Tires! - bit.ly/2ZQ5pxw
Lift Your Truck! - bit.ly/3gKTI43
Accessories + Gear! - bit.ly/2xfBy4T
There seems to be a lot of debate on whether or not a cold air intake ACTUALLY improves your truck. today nick sits down to bust some myths surrounding the performance mod!
#customoffsets #Coldairintake #truckperformance - Авто та транспорт
Performance - bit.ly/3laNYDa
Sign up for our Newsletter! - bit.ly/3k7GNuX
Wheels + Tires! - bit.ly/2ZQ5pxw
Lift Your Truck! - bit.ly/3gKTI43
Accessories + Gear! - bit.ly/2xfBy4T
"if you're into stock, then you should buy a Prius!" Had me rolling, 🤣🤣🤣
When I purchased my '17 GMC Canyon SLE new many years ago I didn't like the engine hesitation. Manufacturers restrict engines so much with their lame intake setups and inferior stock exhaust systems. Installed K&N air intake and that install alone did make a difference. Coupled with a dual catback exhaust upgrade it gained around 30HP and eliminated the hesitation/stall when accelerating to higher speeds. Well worth the investment and were both easy installs even though I had never installed either system like those before.
I’ve got an S&B CAI and it’s awesome! Very easy to Install, looks great and did make a difference for sure. Teamed it up with an exhaust and pedal commander and the truck sounds mean and performs great! Definitely worth the money!
Does it help with gas?
I have an S&B on my 07 tundra 5.7l and I am very happy with it. I like how they have the optional plate you can remove or put back depending on the weather. Next I would like to plumb in a functional air louver from the fender for looks and giggles. Be safe and be blessed
I put a K&N on my 3.6L V6 and it was too loud when towing anything. But I put one on my wife's Crosstour 3.5L V6 and it sounds very nice and you only hear it when you want.
I like modified trucks to some degree. But the older I get the less I modify. All the years and trucks past I had all I'm remembering is more problems with mods than there worth. I did just order a new 2500HD and I'm leaving that one bone stock except for rims and tires. Great informative video!
I hear ya..I have a 2018 2500 HD... The throttle response is terrible compared to my 07.. Only upgrade ill do is a cold air intake..
@@tray8411 may I make a suggestion? Do You have the 6.0l in that?
@@judee00 6.6
@@tray8411 I'm not sure a cold air intake will help your throttle response. There is a throttle response improver but I have no personal experience with that and don't know anyone who uses one. It's a 6.6 diesel so it's going to be laggy anyway. Other than heavily modified, I'm not sure it's worth spending the money to get better throttle response. My buddies with diesels with tuners say throttle response is improved but, most of them drive gas motors now.
I did get my new 2500 in the gas 6.6
@@judee00 Ill take your advice.. So bummed they ruined a great engine.. I loved my 07 duramax.. Thnks for the response
I have the K&N cold air intake and snorkel combo on my jeep rubicon unlimited, paired with a magma flow 4 wheeling cat back exhaust that dumps right behind the rear passenger seat on the driver’s side and it is amazing. Slight increase in mpg when cruising around, but more hp, and torque improvement than I expected. It also sounds great.
Great video! Last weekend I installed a Banks intake on my 2019 L5P Duramax and wow what a difference! I could immediately tell a difference in throttle response and power! Also probably the best part is I can now hear my turbo whistle when I’m driving with my windows down! Totally worth it I highly recommend it! 👍🏼
Have you serviced the filter yet, you will discover you have to remove the whole system to get at the filter, now that's some engineering
I installed a Banks CAI on our 2020. Love it! For John Osborne-it only takes five minutes to replace the filter. Actually, made a video on how to replace.
Monster peddle works better
@@johnosbourne5089 whow
I have 2016 Ram 1500 Sport 4x4 5.7 Hemi and S&B CAI, mileage and performance went up, Top of Line!
I installed the Mishimoto CAI for a Ranger 2019. Big increase in throttle response in low rpms.
I have an S&B intake on my 2019 Cummins, sounds great, looks great, and has increased my usable power. And if I can manage to stay off the accelerator 😅 better mpg's
Does it really make that much of a difference? Without the baffle my turbo sounds pretty good already.
S&B on my L50 with a bigger turbo horn and I hear much more airflow thru the cab turbo is a lot louder great upgrade. S&B has a great product for a great price.
Tacomas have come with cold air intakes, it comes right from under the fender and above the wheel arch. I can't say the plastics and rubber fittings can resist heat better than say K&N but the air is cold.
My honest opinion is aftermarket cold air intake didn't do much except mess with the ecm and the fuel trims I think stock just leave it factory unless you get the motor built
Great content! Thanks!
My truck is the LQ9 6.0L and I installed a cold air intake I thought it wasn't gonna make a difference but it kind of did it sounds way nicer and it gives it more throttle response it's not the fastest but I like it
Like this new guy. Keep up the good vids CO
Just swapped out my K&N cold air intake for something that won't rattle off the throttle body on my '97 Chevy I love the air filters, but I hate how cheap they went with the whole intake assembly.
I have the s&b Cai w/scoop and banks intercooler kit on my 04 ram 2500
Day 18 of asking custom offsets for a "Rating your OBS Fords" episode
Hecks yeah!
Many thanks for your informative video. I'd be very grateful for your opinion on a cool air intake modification I'm thinking of making. I have a Hilux SW4 diesel 2008. The air filter is like a drum on the right and it receives air from under the wheel arch, which, even if the ill-fitting plastic liner with its fragile fasteners provided reasonable protection from dirt and rain thrown up by the wheel, I'd like to shift the air intake to inside the engine bay at the coolest, most protected spot. My idea is to block the orginal entry tube and fit another of the same diameter either forward to just behind the headlamp or at the right back corner of the engine compartment. Can you tell me which would be the cooler position and least likely to suck in dust and rain. Incidentally, I'm againt schnorkels for varios reasons, although they do look "sexy". I'd be extremely grateful for your expert advice on this project.
I got an AFE 3.5” Magnum Stage 2 cold air intake for my F-150 3.5L Ecoboost. Now my turbos sing to me.
Same. I got one for my 13 screw. Hearing the turbo noise is so addicting!
can you make me a cold air intake for a 2021 Prius. Meep, Meep. I have a K&N on my 13 chevy, I can tell the difference. I get 20 mpg, on the highway at 75mph. Duramax.
Purchased a roush cold air intake for my f150. Cant wait to hook it up
Funny that you show a K&N dyno and mention them. Because I was in contact with K&N R&D a few years back when they borrowed my car for a week to develop an intake, and they said they don't really make CAI's because gains are negligible over short ram intakes. And no, your intake with a heat shield is not a CAI. It's a short ram with a heat shield. A short ram intake with a good heat shield or air box with good flow is the best option.
Can anybody tell me of a cold air intake that I can put on a 2018 Hyundai Sonata 2.4. I’ve been looking n there ain’t that many options
Y’all guys need to get some 1 gen tundra performance parts !!!
Yesss man! I love mine and there isnt much love for them in the upgrade/performance. Ive been scraping parts up that fit from all over. All I can get from them is a smallish lift kit and some wheels.
What for? Nobody drives those... lol j/k 😏
Might be stupid question but can I install if my truck is not deleted ?
Has anyone tried the cheaper rough country CAI, it retails for about $149, and looks to be a pretty good one for the money. Just curious how it compares to the more expensive k&n or SB?
It looks like a good deal. Probably a re branded K&N
S&b open style, the filter is HUGE. I know I know its not closed so blah blah blah, I got a powerstroke so the air gets charged from the intercooler regardless of weather or not the air is cold. Made a massive difference on the bottom end for sure.
I have put cold air intakes on all my vehicles since I was 16! Gas and Diesel engines too. Always gain some fuel economy, usually adds for a nice/cool intake sound, and usually adds some noticeable power/acceleration gains! Have ran K&N in the past, but more so sold on the S&B systems the last few years!
you can clearly see this video shows its a "cold" air intake, all that means is its not sucking air from the engine compartment. the duramax diesel in chevy/gmc all have the "cold" air intake system from the factory, theres just no other way.
The cold air intake I got for my truck increased the noise, gave noticeably more torque around 2000-2700rpm, and has caused my truck's MPG to go up by 1 gallon to 17mpg. Also, people don't say this but engine response is increased. When I am parking in a hard area or getting onto the concrete slab of my garage, the engine does not lag as much and is more responsive, which in my opinion is a good thing.
At least this guy isn't claiming 25 mpg lol
3:44 best part of the whole video
I made a pretty cheap cold air intake, it made a very big difference, but also made it a lot louder lol
I'm here early cause I accidentally pushed the notification while pushing something else, but I suppose I'll stay and learn 🤣
Great vid
From what I've researched, it depends what you have for a cold air intake to actually do anything. In regards to trucks, if you have a gas engine, it's not really going to do much. Your engine is already breathing relatively easy from factory. If you're driving a diesel, you'll usually see an actual improvement in power and MPG (depending how you drive). Diesels , especially on trucks, are turbocharged and further choked by EPA regulations, hence why cold air intakes are more effective on diesel engines
I have a K&N on my 05 cat eye and when I first installed it I definitely noticed an increase in power as well as definitely some extra sound but I think it was definitely worth it
Same on my ‘15 LML. Definitely worth it 👍🏻
Definitely.
Just ordered my BORLA S serious for my 2019 Chevy Silverado 1500 5.3 and thinking of getting a cold air intake probably going with COLD AIR INDUCTION . had to order from 4 wheel parts saved $300 and don't have to wait 6 weeks will ship May 20th
That's a PART AVAILABLE FOR PURCHASE it would fit a truck
We offer performance products with a near 4 business day turnaround for delivery 👀
Check your website out. Says 4-6 week back order.
@@CustomOffsetsTV 😅👃
Good info thanks! Here is a question for you though....can you explain the science behind why your website doesn't list ANY wheel weights? whats the deal? don't you have an intern that could knock that out?
Thanks
Not to say "the weight of a wheel doesn't matter" but thats typically something that a car owner would be more concerned about when going for more of a track oriented build persay. As for trucks its kind of not a crucial thing, although would be nice to know!
@@CustomOffsetsTV What?! Thats your answer? unsprung weight is SUPER important... and the word "weight" is shown on the spec list, but you never actually say what the weight is. I was kind of joking with my question, but I'm shocked at how terrible you answer is. There is a massive difference between a 22lb wheel and 45lb wheel. The fact that you think truck owners don't care is actually insulting and gives some interesting insight into your marketing strategy. ie...go after people who only care about looking cool and don't give shit about performance... LOL
It also just breaks down to that being a lot of information to be uploaded/updated to the site! We are rolling it out now with our in house brands like ARKON however for other brands I am not 100% sure when that information will be available but it definitely something that we have talked about and do want on the site for all wheels in time!
@@chadron44 Truck owners don’t care about wheel weight. “What’s the weight of that wheel” said no truck owner ever.
@@johnnydough8841 When I made this comment(a year ago) Custom Offsets had the "Weight:" on the list of specifications for every wheel on their site. But, there was no actual weight figures for like 95% of the wheels on the website. Why did they have weight listed and not put the figures on there? Fast forward to today... and most of the wheels do have the weight listed. Good work, Custom Offets. You are right though, most truck owners don't care, they just want to look cool. The ones who care are the ones with purpose-built rigs.
Does it help with gas?
I just like how they clean up the engine bay
What about “banks power”?
I was literally in summit racing looking at cold air intakes wondering if they are worth it when this video popped up on my phone
Hi, this is your personal NSA agent. 😂
Does a cold air intake work in hot areas like the desert of Arizona?
No
I have an S&B CAI. I like it. I’ve had it for over 5 years now and it hasn’t let me down. I love the turbo noise in my 5.9l Cummins with this intake on it.
Are all cold air intake inspection rated?
Nope. Better stick to your Prius.
Day 3 of asking Custom offsets to do"rating your obs Fords"
Rate welder rigs !!
This guy is funny put him in more videos
I just ordered a CAI for my silverado build.
Who makes the best intake for performance or is this too broad of a question???
When are yall gonna start selling cams, and other go fast parts??
We're looking into avenues we can branch down and fulfill!
@@CustomOffsetsTV sounds awesome
I just recently bought a lowered truck and was wondering on ways to lift it. Do you have to find factory parts or? I need help
Check our store out here for lift kits Vbxl - customoffsets.com/lifts
K&N makes one for my truck but I can’t get it because I’m in California.....and the company is in Riverside, CALIFORNIA like an hour away from me?!?! WTF
California gets weird with everything now a days unfortunately =/
Cold air intake ain’t worth the $ unless your running other after market goodies. Like a MPD piping kit. I’ve had one before putting compound turbos on my f250 noticed no difference. I’ve had both S&B and now I have the No Limit because it fits my MPD piping kit on my compound setup
Lol you're like only person to say that
@@malcolmn.5222 how many compound setups have you had on your diesel? Ill wait……. I do this Malcolm i multiple f250’s Goodluck kid
Nick looks like Donnie Whalberg in the sixth sense 🤣
More noise for more power doesn’t sound like a trade more like a win win
Do these intakes void warranties?
That is dealer discretion
Look up he Magnuson-Moss act. If your stealer ever gives you any crap, recite that law to him, offer to have your attorney recite it for him if he can’t hear you very well.
2:30 I cry now
So I installed my cold air intake and now my truck cranks then immediately dies. Wtf is going on? Can anyone maybe tell me?
Probably got a vacuum leak which means the engine isn’t getting enough air to idle.
Day 1 of asking custom offsets to rate obs Broncos. Maybe you’ll finally get mine in there
day 13 of asking for a viewer's import truck rating video 🔥🔥🔥
I can’t order cuz I live in Cali 😢
day one of asking to do a rating your "most popular diesels aka 6.0, lbz, 5.9
I try to thank a Prius driver everyday... because they're saving the fuel that I'm gonna burn. Thank you Prius' drivers!
day 19 of asking for a video of top hybrid wheels
I want a cold air intake, but for what they do it’s really just not worth the $400 in my opinion
Some this are just made to make money
@@youngboomerragevictim8857 well, these days with Biden screwing us all over, it'll probably be easier to justify dropping 370 after taxes if some mpg gains are to be made.
CAI does make a small difference
Day 11 of asking for the top 5 dually wheels
Nissan nismo cold air intake 👍🏾
Sounds hard to find and expensive
@@CustomOffsetsTV easy to find for the Nissan Titan 5.6 endurance',
Day 2 of asking co to build a preruner ranger
Pavement princesses 😭
Mall crawl what up
Of you're driving a truck for MPG... Then you're always going to be dissatisfied. It's a truck! It's meant to tow and haul!
Unless you have your tube hooked into an ice box it's not a cold air intake. It's just an ambient air intake system
Dry ice, you dont want regular ice it will have less oxygen.
Says dyno proven, doesn't show any dyno results. Most dyno-improvement runs are from a dirty stock filter to a new system. Not from clean stock to new.
Go watch street speed 717 put a cai on a brand new truck that was just broken in. Well engineered cai will give you 15-20 hp/tq gains. It's simple, if it's piped right with better heat shielding the air going into the engine is cooler and denser giving you more power. A keyboard mechanic can tell you all about how they don't work but when Gale Banks tells you it works, it bloody works. May not be worth the 350-400 but the claims that S&B, Cold Air Inductions and other reputable manufacturers make (within reason) are accurate. Otherwise they would get done for false advertising.
LIMITEDDDDDD
Where’s dusty 😕
He's still here!
Day 6️⃣9️⃣of asking Custom Offsets to build a Monsterjam Monster Truck with 66x43 tires.
Ill always trust the OEM. Im not smart enough to overide the engineers
day 8 of asking custom offsets to do a “rating your single cab diesels”
Oh this outta be interesting. Like Delta Bravos putting loud exhaust on their trucks. Just don't. Don't.
Y’all need diesel performance parts
Workin on it, because I agree! - Rainey
@@CustomOffsetsTV start with getting ez lynks
That, hair, cut,
Howdy🤠🇺🇸
K&N is definitely the best. I swear by K&N I have a cold air intake. Oil filter and fuel filter. Would use their new oil but it only comes in synthetic... boo
K and n oil filters are sketchy
@@matthenry9385 really? How’s come
@@KD-ls8nn They don't really filter much of anything. Pretty much the same as just removing the filter altogether.
Mobile 1 or Purolator
Tune with a programmer
howdy i don’t know what it is about everyone wanting to be first but i was not first and i don’t care😐
First?????
Lol. Buy a Prius
God damn the new chevys are hideous
Not useful information