Thank you so much I love these "Unprofessional" types of videos because they actually give you the way to do it unlike many professional companies that just talk about the product and all of the crazy things you need Very useful and helpful thank you sir
For those wondering about how to monitor the Logic mix, what we do is make an aggregate device in the 'Audio MIDI Setup' app made up of our A&H SQ6 USB output, and the built-in audio output (i.e. the headphone socket/internal speakers on an iMac/MacBook). This gives us a 34 channel device that we select as the audio output in Logic (where he showed selecting 'X-USB' in the video). The first 32 channels are what goes out over USB to the mixer (though you would only use two of these for your stereo mix, again as shown in the video), and channels 33-34 go to the headphones. Our mix bus is on an aux channel one stage before the actual Output channel, with a Send added which routes the mix audio to 33/34 and gives a separate output going to the headphone jack (or built-in speakers) that we can control the level of independently. The added benefit of this is that if you have a channel you don't want to go out to the live stream, say an MD or talkback mic, that you would still like to hear in your monitors, you can route that channel directly to Output 33/34 (in our case) and completely bypass the main mix bus. On another note, @PHED Church it's strange that your M1 Mac Mini struggles to record as well as process the mix-we're running a 10 year old iMac with an i5 and 8GB RAM, and it'll process 32 channels of audio from our SQ6 with a decent number of plugins (mostly stock with a couple of Waves) absolutely fine. We multitrack record simultaneously, and we have no issues during our livestream. We're probably pushing the limits a bit, but an M1 should be loads faster. Maybe the shared memory means that it really needs 16GB to have enough breathing room.
This was very helpful. One question: What is the advantage of routing the stereo mix from Logic back into the mixer vs just sending the stereo mix from the headphone jack directly to the Atem?
Good question. Why send it back to the X32? We send it out the M1’s headphone socket directly into the Atem. Works a treat - it is the mix you want Charles because you’ve told Logic to send it there and not back to the X-USB. So I’m genuinely curious if your way has benefits. Is it lower latency for example?
@@markwilliams4276 We tried a few different methods (including the simple headphone out) to route the audio from Logic back to the ATEM and have (at least for the moment) settled on sending the audio feed back into the mixer via USB and then out to the ATEM via a stereo aux mix. We found, at least in our situation, to eliminate all perceivable latency and enabled us to better monitor the Logic mix being sent to the ATEM.
This helped me. The Behringer X32 routing is pretty powerful but also can be confusing. With the change to X32 user input/outputs you can define each channel. I was struggling getting the card to the Aux out. As you demonstrated, just use a direct out.
No it is crystal clear.. however. If you are going into a atem mini… you have to go set the input from mic to line. If it is set to mic… you will have noise cause they apply 20db of gain…
@@JamespMusic that's not what he's explaining. the x32 is an audio interface on its own. he's simply explaining how you can use the Daw for broadcast mix, and sending it back to a video switcher
We are running an AH Qu32 board through a camera , sound card to Mac desktop to ECAMM live . Is it possible for me to add LOGIC pro as a DAW on teh same Mac and send the audio into ECAMM?
Hey, no you do not. IF you decide to record this will take a TON of processing power and may glitch depending on your computer. You DO have to have "record" enabled. This allows for live monitoring. hope that helps.
Hey, we don’t. The latency is so low we don’t notice it usually. If you do though, you can go to your settings on video switcher and add a little latency on the video. We use a black magic they now have that option.
Great question. We route to buses now.. in the video we were doing all stereo outs. We now have vocal, drum instruments buses with effects and such on each.
Are you using one computer to process in logic and another computer to stream? I would imagine it be intense on your pc to do everything (logic and obs)
We are using this method with Reaper and X32. Reaper and Vmix sit on the same Windows box. We don't have issues, but it is a pretty robust computer. You can record a session on Reaper and then set up your livestream mix. It is really hard to mix livestream when you are in the house. Sound just bleeds through the headphones and skews your mix.
We are using the board for house. And logic for livestream. We run the livestream back through the board on 2 channels for stereo. Not using the board to mix online. Only in house.
What kind of wire are you using for the aux? I tried this last night and couldn't get a signal when we sent to aux on the board (we use a M32 at my church) -- please help fast. We have a conference Friday -Sunday and have to fix our stream audio. God bless
Hey sorry just seen this… we just used a cable that went 2 ts 1/4 to 1/8.. and we have the audio going into our atem . The problem is probably more likely your routing.. you have to route the output of whatever channels you are using to go out those aux ports.
Currently I’m using logic on my laptop, and feeding my black magic through the laptop stereo headphones jack with a 3.5mm aux cable. Am I getting max quality, or do I have to feed back to mixer to the black magic to get max quality?
Is this set up working for you (headphone jack to Atem)?? I'm working on set this up and this seems like it could be the simplest way to do it. Though, like you, I'm wondering if it compromises the quality at all.
I followed the steps but I am not getting a signal in 29 & 30 for some reason. Everything is set correctly but no signal. Am I missing something? Do I need to update the mixer?
Thanks for replying so quickly! You are awesome! Unfortunately, it looks like I have everything routed correctly… we are using the x32 digital snakes. Not sure if that would be a problem.. but I went into routing and under the user I went to Card in and selected 29 and 30. And then I went to the ox out one and two and changed the Direct out to 29 and 30 as well and switched the tap to the same setting that you had, but for some reason I can’t seem to get anything back to the board that is coming through logic.
Hey great question: we use the headphones we already have for the soundboard. So the R and L coming back to sound board from stereo out we just “solo” that and that is the feed. :) for our we have the stereo out coming back to 29/30 as a stereo channel which we send to live stream. To set this you go into preferences, audio, and then stereo output you can select a return channel. Hope that helps.
@@JamespMusic Also you could sit another room / building with a computer listening to the livestream. Remote to the box and adjust as needed. Really hard to mix livestream when you are in the house as sound will leak through the headphones.
hey if you're running the Logic Project stereo outputs back into the mixer, then how are you listening to the logic project at all?? for example the output could be external headphones and connect headphones to the mac, but since the output is the X32, how are you doing it ?
Hey great question.. so we just use the board. We “solo” the 2 channels. We currently have one guy mixing both so this is good for him. When he wants to adjust the live stream just hit solo on mixer. Other thing you could do is plug headphones, directly into the Mac computer.
@@phedchurch when he solos , it doesn’t effect anything on FOH or any monitor system outside right ? Just solos into the headphones connected in the mixer ? And if you connect headphones in to the mac you would have to change the output on logic to hear it though
@@KennySalamanca yes I believe that is true. The soloing doesn’t affect the main mix. No, you can set up your board so when you solo it’s almost main mix, but this is a setting in your X 32 a default is through headphones only. I’m sure there’s another way to maybe set up a second output I’m not positive on that there may be another way to more efficiently send the sound to a live stream as well. We were using another interface to do this however, we experienced extreme latency when doing that.
@@phedchurch alright , thank you and one more question , sorry I’m asking a lot but , how is it on time with video ?? What’s the process from there. So audio and video match , is there latency ?
@@KennySalamanca You have to delay the audio coming into your switcher, as video is always slower than audio. Simply find the audio delay setting in the input you are bringing the audio into the switcher.
I'm having a hard time getting a signal to come into channels 31 & 32 which I have designated as the two channels that will receive audio from Logic. Please help
Thank you for the video, I’ve been considering trying this for a few months now. To get the sound back to the board can you use the same usb connection that gets the signal from the board to the computer or do you go through an interface. Much appreciated.
Hey, yes use the same one. You can use an interface.. however when we tried this we had about 3 seconds of latency. Wasn’t good. So we run the main stereo out back through the usb and assign it to 2 channels. Then send the output of those two channels to an aux or something
@@JamespMusic actually I figured it out yes you can use the faders as well to get a post fader but still use logic EQ ua-cam.com/video/b_CbqDq61CQ/v-deo.html
Hey, did you change your routing? Go to routing page and the set accordingly. Another issue may be the “output” on your logic channels. You have to set the output on there as well.
I’m getting sound from the the x32 to logic, but when sending it back to the X32 I get no sound. I’m not very tech savage, but I’m sure it’s something to do with the card routining… idk
Thank you so much I love these "Unprofessional" types of videos because they actually give you the way to do it unlike many professional companies that just talk about the product and all of the crazy things you need Very useful and helpful thank you sir
You should select I for input monitor instead of R for recording. This way your faders will display level outputs not recording level inputs.
I was going to say the same thing lol. they probably learned by now, Hosana
My first thought
Yep
This is amazing !!! I will be using waves bundle plugins as well !!!
For those wondering about how to monitor the Logic mix, what we do is make an aggregate device in the 'Audio MIDI Setup' app made up of our A&H SQ6 USB output, and the built-in audio output (i.e. the headphone socket/internal speakers on an iMac/MacBook). This gives us a 34 channel device that we select as the audio output in Logic (where he showed selecting 'X-USB' in the video). The first 32 channels are what goes out over USB to the mixer (though you would only use two of these for your stereo mix, again as shown in the video), and channels 33-34 go to the headphones. Our mix bus is on an aux channel one stage before the actual Output channel, with a Send added which routes the mix audio to 33/34 and gives a separate output going to the headphone jack (or built-in speakers) that we can control the level of independently. The added benefit of this is that if you have a channel you don't want to go out to the live stream, say an MD or talkback mic, that you would still like to hear in your monitors, you can route that channel directly to Output 33/34 (in our case) and completely bypass the main mix bus.
On another note, @PHED Church it's strange that your M1 Mac Mini struggles to record as well as process the mix-we're running a 10 year old iMac with an i5 and 8GB RAM, and it'll process 32 channels of audio from our SQ6 with a decent number of plugins (mostly stock with a couple of Waves) absolutely fine. We multitrack record simultaneously, and we have no issues during our livestream. We're probably pushing the limits a bit, but an M1 should be loads faster. Maybe the shared memory means that it really needs 16GB to have enough breathing room.
Hi I'm new to broadcast mixing but do you know how to set up a studiolive 32 console for broadcast mixing
@@thomasricks5737 sorry but I've no experience with that console.
@@thomasricks5737that console is old gen and don’t support usb connection. They don’t update either. Get an x32 or similar.
YOU ARE AMAZING!!!!!!! I knew there had to be something simple that I was doing wrong in this set up, and it was the I/O setting! THANK YOU SO MUCH!!
Did it fix it? I can’t seem to get it going, can’t get logic on the live without it sounding terrible…
How is they sync between the camera's and the audio? Does this not create enough latency that the audio comes after the image?
Great explanation!
Thank you sir for such simple video with clear process.
This is very useful information
This was very helpful. One question: What is the advantage of routing the stereo mix from Logic back into the mixer vs just sending the stereo mix from the headphone jack directly to the Atem?
this!
You won’t get the mix you want and it’ll be very unbalanced
@@charleshogue7302 How so? Does the headphone jack reduce audio fidelity and quality?
Good question. Why send it back to the X32? We send it out the M1’s headphone socket directly into the Atem. Works a treat - it is the mix you want Charles because you’ve told Logic to send it there and not back to the X-USB. So I’m genuinely curious if your way has benefits. Is it lower latency for example?
@@markwilliams4276 We tried a few different methods (including the simple headphone out) to route the audio from Logic back to the ATEM and have (at least for the moment) settled on sending the audio feed back into the mixer via USB and then out to the ATEM via a stereo aux mix. We found, at least in our situation, to eliminate all perceivable latency and enabled us to better monitor the Logic mix being sent to the ATEM.
To bad you couldn't visit my church and get us all set up and give us a training session. Have you ever thought of doing this via facetime?
Great video. God bless
This helped me. The Behringer X32 routing is pretty powerful but also can be confusing. With the change to X32 user input/outputs you can define each channel. I was struggling getting the card to the Aux out. As you demonstrated, just use a direct out.
Thank you!!
So is it possible to have my logic mic sent to the house as well as the livestream?
Merci d'avoir la réponse à ma prière ! 🙏🏽
thank you, brother, which church live stream i want to listen GOD BLESS YOU
How are you dealing with latency? Seems like there’s some on your live stream
What camera did you use to record this video?
Input monitor is what you were looking for
Hey Short question is it possible to send the busses back to the x 32 and Not just the Main Output? We would need that for pur Setup in the church
Do you get any electric/RF noise using the 3.5mm jack from the Aux 1/2?
No it is crystal clear.. however. If you are going into a atem mini… you have to go set the input from mic to line. If it is set to mic… you will have noise cause they apply 20db of gain…
Do i have to do this for the presonus studiolive 32 board
Just get an Audio Interface, and send the audio through the monitor outs into your video switcher.
I think you are missing the point. :)
@@JamespMusic I don't think so,
Just making it easier,
@@JamespMusic that's not what he's explaining. the x32 is an audio interface on its own. he's simply explaining how you can use the Daw for broadcast mix, and sending it back to a video switcher
I agree with you tht will be easier. So tht you can save up the output port behind the console for other thing. ❤
Is it possible to use the mixers scene to record? Cause I've been trying to record with the mix I have on my x32 but it comes out raw
We are running an AH Qu32 board through a camera , sound card to Mac desktop to ECAMM live . Is it possible for me to add LOGIC pro as a DAW on teh same Mac and send the audio into ECAMM?
You don’t have to press Record for the session to have it working ?
Hey, no you do not. IF you decide to record this will take a TON of processing power and may glitch depending on your computer. You DO have to have "record" enabled. This allows for live monitoring. hope that helps.
Er, can this be done with Ableton Live?
How does the routing look like on CARD, USER (output and input)
Having trouble getting signal
Me too, have you solved it?
Great video sir, how do you compensate for the latency on the returning audio feed sent to the switcher
Hey, we don’t. The latency is so low we don’t notice it usually. If you do though, you can go to your settings on video switcher and add a little latency on the video. We use a black magic they now have that option.
@@JamespMusic oh thanks, i have the Atem extreme, ill check through the software. thanks
how is the latency for monitors
Really straight to the point. As far as processing go, do you process individual tracks or you route to a bus?
Great question. We route to buses now.. in the video we were doing all stereo outs.
We now have vocal, drum instruments buses with effects and such on each.
How do you send the audio from two channel to live stream computer? And are you also using pro pre that will play video to the foh?
Do you know how to do it on a presonus board
You didn’t cover how do you hear what’s going on in your mix?
Thank you bro, keep on showing us. God bless
What are the Mac specs that are needed for running this please?
Hi when we try running our audio through the DAW mid stream the audio will start a hard lag we are not recording just running audio through
Hey, so go to your setting in logic, and you want to set the processing to higher bit rate. That sometimes helps. But there is always some lag.
Are you using one computer to process in logic and another computer to stream? I would imagine it be intense on your pc to do everything (logic and obs)
Same question here
We are using this method with Reaper and X32. Reaper and Vmix sit on the same Windows box. We don't have issues, but it is a pretty robust computer. You can record a session on Reaper and then set up your livestream mix. It is really hard to mix livestream when you are in the house. Sound just bleeds through the headphones and skews your mix.
In their setup the streaming is on the Atem box, no not on the Mac that runs Logic.
Hey ! Are you using one board for the live stream and the house mix ?
We are using the board for house. And logic for livestream. We run the livestream back through the board on 2 channels for stereo. Not using the board to mix online. Only in house.
What kind of wire are you using for the aux? I tried this last night and couldn't get a signal when we sent to aux on the board (we use a M32 at my church) -- please help fast. We have a conference Friday -Sunday and have to fix our stream audio. God bless
Hey sorry just seen this… we just used a cable that went 2 ts 1/4 to 1/8.. and we have the audio going into our atem .
The problem is probably more likely your routing.. you have to route the output of whatever channels you are using to go out those aux ports.
Currently I’m using logic on my laptop, and feeding my black magic through the laptop stereo headphones jack with a 3.5mm aux cable. Am I getting max quality, or do I have to feed back to mixer to the black magic to get max quality?
Is this set up working for you (headphone jack to Atem)?? I'm working on set this up and this seems like it could be the simplest way to do it. Though, like you, I'm wondering if it compromises the quality at all.
We do this and have no quality issues.
I followed the steps but I am not getting a signal in 29 & 30 for some reason. Everything is set correctly but no signal. Am I missing something? Do I need to update the mixer?
Hey, so you probably need to go to routing and update your routing.
Needs to be “card” into 29-30.
Over usb. Hope that helps.
Thanks for replying so quickly! You are awesome! Unfortunately, it looks like I have everything routed correctly… we are using the x32 digital snakes. Not sure if that would be a problem.. but I went into routing and under the user I went to Card in and selected 29 and 30. And then I went to the ox out one and two and changed the Direct out to 29 and 30 as well and switched the tap to the same setting that you had, but for some reason I can’t seem to get anything back to the board that is coming through logic.
How would you monitor that feed?? Through headphones or monitors??? Can someone explain that plz
Hey great question: we use the headphones we already have for the soundboard. So the R and L coming back to sound board from stereo out we just “solo” that and that is the feed. :) for our we have the stereo out coming back to 29/30 as a stereo channel which we send to live stream.
To set this you go into preferences, audio, and then stereo output you can select a return channel.
Hope that helps.
@@JamespMusic Also you could sit another room / building with a computer listening to the livestream. Remote to the box and adjust as needed. Really hard to mix livestream when you are in the house as sound will leak through the headphones.
hey if you're running the Logic Project stereo outputs back into the mixer, then how are you listening to the logic project at all?? for example the output could be external headphones and connect headphones to the mac, but since the output is the X32, how are you doing it ?
Hey great question.. so we just use the board. We “solo” the 2 channels. We currently have one guy mixing both so this is good for him. When he wants to adjust the live stream just hit solo on mixer. Other thing you could do is plug headphones, directly into the Mac computer.
@@phedchurch when he solos , it doesn’t effect anything on FOH or any monitor system outside right ? Just solos into the headphones connected in the mixer ? And if you connect headphones in to the mac you would have to change the output on logic to hear it though
@@KennySalamanca yes I believe that is true. The soloing doesn’t affect the main mix. No, you can set up your board so when you solo it’s almost main mix, but this is a setting in your X 32 a default is through headphones only. I’m sure there’s another way to maybe set up a second output I’m not positive on that there may be another way to more efficiently send the sound to a live stream as well. We were using another interface to do this however, we experienced extreme latency when doing that.
@@phedchurch alright , thank you and one more question , sorry I’m asking a lot but , how is it on time with video ?? What’s the process from there. So audio and video match , is there latency ?
@@KennySalamanca You have to delay the audio coming into your switcher, as video is always slower than audio. Simply find the audio delay setting in the input you are bringing the audio into the switcher.
I'm having a hard time getting a signal to come into channels 31 & 32 which I have designated as the two channels that will receive audio from Logic. Please help
Hey, you have to go into your x32 and go to routing… user… and the. Assign 31 and 32 to be “card in” 31 and 32z
Hope that helps.
@@JamespMusic I’ve already done that
I have the same problem
i have the same issue as yours.. have you been able to find a solution? i urgently need one
@@danelle_santoss no I wish I have
💕💕😍😍💗💗
Thank you for the video, I’ve been considering trying this for a few months now. To get the sound back to the board can you use the same usb connection that gets the signal from the board to the computer or do you go through an interface. Much appreciated.
Hey, yes use the same one. You can use an interface.. however when we tried this we had about 3 seconds of latency. Wasn’t good. So we run the main stereo out back through the usb and assign it to 2 channels. Then send the output of those two channels to an aux or something
hey is there a way to mute on x32 and it mutes in logic
Hey, not that I am aware of.
@@JamespMusic actually I figured it out yes you can use the faders as well to get a post fader but still use logic EQ
ua-cam.com/video/b_CbqDq61CQ/v-deo.html
It didn’t work. I don’t get signal back into the x32. I followed everything
Hey, did you change your routing? Go to routing page and the set accordingly.
Another issue may be the “output” on your logic channels. You have to set the output on there as well.
I’m getting sound from the the x32 to logic, but when sending it back to the X32 I get no sound. I’m not very tech savage, but I’m sure it’s something to do with the card routining… idk