Great first steps in bringing BF angle mode up to snuff! There is TONS of great things in Emuflight that we worked on and tested 1,000's of flights on that would improve it even more, reduce gimbal lock when reaching 90 degrees and smoothing out the whole angle system to give angle pilots tunable control and push the limits. Let's hope more advancements happen, but very happy to see Chris add some Angle Passion back to BF!
Mad props to Silver13 who first implemented all this over a decade ago in silverware and passed the knowledge and working example along for the rest of us to use in projects like quicksilver and betaflight. Great job getting BF up to speed!
Thank you Chris for what you do. FPV may be a small audience but you sir are very awesome. Thank you for helping us improve the world of FPV. Thank you
Is there an update to this? When I go into the 'Do you want to test this build' comment, the 'assets' link no longer works :😟 In addition, any ETA on when this will actually be in the standard build? Thanks Again.. great video! )👍👍
I don’t want to sound like I know what I’m talking about but I thought I would post this comment / question. I have not looked at the Betaflight code and my experience with digital filters is primitive at best. But… It seems like you are reinventing digital filters. And it seems like since a drone is physically not attached to anything else, it should be possible to get the precise mechanical response characteristics for the particular drone by inputting sin waves at various frequencies into the system to get the drone’s frequency response curve. Then use that curve to create a matching digital filter which will optimize (at least in theory), the responsiveness of that particular drone. The idea would be to first get the drone to hover. Then wobble it at different frequencies on the three axes to get the response curve for each axes. Then compute the optimum digital filter for the drone for each axes.
I'm visiting Bangkok and flew a 80mm quad with a Vista off a rooftop restaurant. I used angle mode because I wasn't too familiar with the fairly small area and it made my landing more controllable (no inadvertent drifting over the rooftop ledge..) Technically my wife was spotting but not reliably after a few glasses of wine 😄 So there are some benefits to angle mode but you have to fly it completely different to get proper cinematic footage.
Man... the amount of value and improvement you bring to this hobby is just amazing. First you fixed frames and tuning for us... and now that angle mode! When I learned FPV, I quickly moved away from angle mode to Acro with my Tinyhawk... it just didn't feel well. You explained quite well why! This is gonna be an interesting change!
Thank you Chris! As a almost daily fpv quad flyer for 10 years, I’m so satisfied/grateful with base/clean/Betaflight’s focused on 5 inch Rate/Acro mode all these years, as decent whoops only appear in the last 4 years…..And after 40+ years in this wonderful world of Land/air/sea R/C……the weakest link is still the Pilot…..get out and fly😎
Thanks for this info, updated my Holybro Kopis 2.5 whoop and it is much more responsive in angle now, had to adjust my rates a little but flies much better now 👍
Thank you so much for this Chris, this is exactly what I've been wanting the quad to feel like in angle mode! It is so much easier to fly now, so much faster as well. What a huge difference!
Hi, what FC youre using, haven't tried it yet, my Fc is betafpv F411 1s 12A aio, and my current Firmware is BF 4.3.0 will i able to flash this in my current Firmware?
Next betaflight will have a new mode: Acro, angle, horizon and Rosser mode! This looks so cool. I'm very interested in seeing how these changes would affect "level race mode"
Tested on a DIY 2" whoop, flying inside. STM32F411 on a Happymodel ELRS X1 AIO 2-4S (CRAZYBEEF4SX1280). Caddx Vista, so a bit heavy at 78 g without battery & the motors are too small; 1202 8420KV's. The only initial problem was the same as noted on comments in Github: ELRS was lost at first. In CLI, "get express" - the AU domain after flashing is probably wrong and needs to be set again. Diff did not fix this, had to be manually changed. Tested with the defaults (angle_feedforward = 50 and angle_earth_ref = 100). *Very nice behavior.* Finally this whoop runs OK in Angle mode. Was able to hit smaller gaps and fly much faster than with the regular 4.4.4 RC3 it had before this. Rapid turns in tight spaces feel much better. Will test with different values later. I really hope this gets into 4.4.0?
Also, thank you for explaining feed forward! I started flying in 2019 and got really interested in the technical side of things thanks to people like Joshua Bardwell. But NO ONE (no offense, UAV Tech :) could really explain the basics of tuning. They all tend to gloss over the most important concepts. In a matter of seconds, you just perfectly explained something that others have struggled to do.
Reminds me of the old rate gyros vs heading hold. I believe the issue then was the wind up of the loop that happened the longer you held the stick. Feed forward sounds like some extra gain on the stick authority that happens depending on the rate of initial stick change and again rate that it slows.
Great! But what will happen, when the 4.4 is released? You will still have an option to download an automated build from this pull request with 4.4 and upcoming final releases?
Chris, this is awesome! Can't wait to give it a try, though I haven't flown angle mode in quite awhile. Hopefully this makes flying whoops in the house fun again, or at least a lot more fun!
Thanks to you Chris, this feature is already incorporated in Betaflight 4.5. However, I have a query. When I tested the angle mode in Betaflight 4.5, it performed amazingly well, especially with the ease of turns with only yaw inputs given. How can I achieve the same "integrated roll" behavior in the acro mode? I couldn't find any setting options for this. When I attempted a brief flight in acro trainer mode and tried a turn using only yaw inputs, the craft seemed to lose its orientation. It converted the forward pitch into roll, which is indeed the core issue you described in the beginning of this video.
I almost never use Angle/Horizon mode anymore even when flying inside but I found that Horizon mode and reducing the Horizon Strength gave me much better response. I've also played with Horizon Transition. I will certainly try this new setup to see if it's worth going back to self-leveling.
Okay, freeze frame at 1:50 -- I know we're talking about angle mode and all but HOLY BEJEEZUS I've never seen a quad tuned so well! The stops on those snaps are like punching a brick wall.
Thanks for all of the great content Chris! I tried getting this to work but it failed. I was able to upload what look like BF 4.5 and tried reinstalling my profile and things were a mess. I too knew to this to really troubleshoot. I re-flashed it to 4.4 and installed my profile and now back in business. I may give it another poke in a few days.
Dayum, the responsiveness in angle mode went through the roof! Thank you so much! Need to tune my Mob6 again with BF4.4, but I'll manage that somehow I guess.
I sold my 'proper' favs (protek 35 & Cinelog 25) because of the hassle of the way they flew in angle, bought the avata and its just as bad at times, but without the ability to configure. Thinking I'll be buying the Cinelog 20 soon
Gr8 video, didn't ever think about angle VS acro mode being so different in terms of fundamental axes controls, particularly pitch/roll VS yaw in angle mode 💪👍
I have several different frames of your design. I just did a comparison video of the 3.5 V2 and the 03 quite oblivious to the DJI 03 accomodation. I have another video about the colored carbon. I see the 03 UL5 is now a longer fuselage. I really like the UL5 with tight bracing.
Hello Chris! Thank you for your work! This is very interest improvment. I try to tune angle mode on my tiny whoop in BF 4.5 RC2 to follow your manuals in PR. I understand not full, how can i tune feedforward smoothing. Please, can you provide some screen shot from BlackBox explorer with good step response angle debug parameters. That will be very helpfull.
i fixed my angle mode whooping a while ago, i put it in acro mode lol! i only ever use angle mode when im flying LOS while walking back from where ever i crashed lol
I run angle mode mostly as acro flips gives me motion sickness and ruins the hobby for me so I just race around in angle doing fast smooth lines. I notice angle mode the faster you get the less predictable it gets so the racers would really like these new settings .I also noticed angle mode is just that it needs to be at an angle to work properly too flat and its kinda crap so hopefully this helps with that aswell
I’m not yet flying but I thought that this slower response was the whole purpose of angle mode. I’m going to watch this, though, because you’ve got a great way of explaining things!
I usually only fly acro in non windy conditions. So I mostly fly angle mode and have put up with the lack of responsiveness. The wobble explanation is pure gold and I never really understood why I got wobble in all my angle mode flying until viewing your details today on error's between the two co-ordinate systems. I hope enhanced/updated BF angle mode can make it to official BF release soon. Going to try this release on an F4 based whoop that I only fly indoors. Subbed!
Going to have to give this a go. I think the FF update will help dial in my whoop racing laps. Main issue I have though is flying micro whoops in angle mode and I bump into something, BF freaks out and tries to fly off in the opposite direction.
Thanks Chris, I'm a bit late to the party on this great idea. Iv'e just tried this update on my mob6, it update fine, loaded the correct assets, when it tries to take off, it yaw spins and stops.... what have I missed or how to I get back to the original assets please. Thanks in advance. EDIT - the motors reversed tab needed clicking on... school boy error.....
Okay, so I installed 4.4, and I gotta say, it is indeed all that 'n' a bag o' crisps. Chris, my Man, you are indeed of Merlin-grade wizard stock. Angle Mode is at least a couple of orders of magnitude better now. I can do things with ease that took some effort before. And this after only flying a handful of packs so far. The switch was easy as cake, with no issues on either upgrade. Thanks much, Good Sir. Once again you've helped majik my little dudes into something wonderful.
So now that 10.9 is no longer in beta, does that mean I don't have to download the nightly Hex File anymore? (What I'm asking if it's now built into betaflight 10.9 full release?)
Hey Chris, I stumbled across this video for angle mode, searching for something different, and it's incredible insight into this mode! Great work! I learned a lot here, except I'm currently struggling with one aspect of the angle mode for cinewhoop filming. Everything is flying really slow and smooth in angle mode with the added ff feature but I have tried many setting changes to keep my throttle from bobbing up and down including the reference from your video pertaining to the throttle curve and expo. No matter what I do, I still have a slight movement up and down and can't seem to relax the throttle. It really comes through on the naked go pro footage as the horizon of an indoor atmosphere is moving up and down even after stabilization. Are there any extra tips you have that I can mess around with to get the perfect flight feel. Thanks in advance and for all you do for our hobby!
Very interesting and informative video. I still fly angle mode on whoops indoors. This looks like it will be very helpful. My favorite whoop to fly was the Alienwhoop Zero running NotFastEnuf Silverware. It was a ripper. 😎
holy whoop batman - I didn't realize this! I've been flying the baby nano 20 and was trying angled for the first time since I learned how to fly.. I abandoned it cause I thought I just got too good for it. lol Thanks Chris for letting me know it was betaflight and not me flying brilliant. lol
This is awesome. Were the root causes (lack of feed forward, and yaw/roll using different control mechanisms) of these issues known ... or did you discover these through experimentation? Great job.
Interesting content, thank you for sharing 👍 Does this update also reduce the gimbal lock problem (which occures in angle-mode, when the pitch angle is 90 deg)? I wonder, if there is a flight mode built with quaternions (where there is never a gimbal lock possible).
Mmmmkay. I stopped this a minute in to say this should be good. I fly Angle exclusively, and I have my BF 4.3.2 rigs tuned to what I consider nigh-on perfect. I can't wait to see what else I can learn from Mister Wizard here. Teach me, my Sensei. . . your pupil abides.
I have been using your v4.0 file on my 4" LR and have been very happy with the improvement in the way it flies in angle mode, I am about to replace the Vista on this quad with the DJI 03 air unit and would like to update to Betaflight 4.4 to get the latest OSD improvements, can I do this in a way without losing the angle mode improvements ?
Isn't what betaflight put in pretty much identical to the Emuflight angle code that's been around for over a year? A lot of things sound the same to me. In my opinion, angle mode is a very useful mode and is now very underestimated by new pilots. I know one reason is that people would rather commit to one flight mode for all quads. I can understand that, but especially with a micro whoop which flies significantly different to larger copters, I think you can also fly with different flight modes. Especially in whoop racing, angle racing makes progress very quickly. Of course, the skill cap of acro is higher, however it requires a lot of time and practice on the small whoops on tide tracks. Racing at a high level in angle is still hard enough and not easy. So try it! I also use angle on my cinewhoops in many situations.
So if i have 4.4 i have this already? Before a watch the video. Acro snapping because the roll and pitch rate u enter. Make it 100 and it's slow to roll. I usually up my angle mode to 80 strength and max angle 80 or max angle quad can do before falling out the sky at full throttle. After watching. So this adds feedforward and more p to get rid of delay
after i installed this to my 2.5 4s its kinda acting like desyncing mot not shuts down. but one of the motors trying to spin faster with no reason. this can be the cause?
Looks promising, but I'm going to wait until 4.4 comes out as a proper release. All the issues Chris mentioned I seem to have well in hand, as my rigs already behave with alacrity and precision. I can wait, but I am keen to see what's next in 4.4. . .
I don't think I would have got into fpv if it wasn't for the slow responsive angle mode. Now I rarely use angle mode and always fly Acro Acro but it was a beginning for me little over a year ago.......
Hey Chris, crackin video! Great explanations and solutions. Never even thoughts about these angle mode handling issues, just thought it’s angle mode… but these improvements are great, I gotta setup my tiny quad like this. Thanks for the video, Cheers!
Hi Chris, sorry for the dumb question but I'm getting a "Failed to generate URL to download artifact." error when I click on the "Assets" link. Do you have a suggestion ?
Keeping yaw rotation around the earth’s vertical/z-axis (rather than the quad’s) is something that silverware has been doing for years. Imo that was the huge draw of NFE Silverware’s angle mode for brushed builds back in the day, and remains one of the main draws of modern day quicksilver. Here’s hoping BF crash recovery and the gyro wind-up issue (not sure that’s the right term, but the thing where it doesn’t fly straight for a few seconds after hard crashes) are improved as well. Quicksilver still handles clipped gates/obstacles better than BF in whoops, imo.
It will be interesting to see how beta flights whoop Code stands against emuflight. With Dual Axis Steering they have other nice things done to the angel mode
I appreciate the explanation and work that went into this, but I can not imagine ever flying anything other than acro - I've been flying micros indoors for the past 4 years.
We are so lucky to have smart people like Chris in our hobby 🙌 great work Chris I’m going to give this a try.
this opinion is so disrespectfull to all those who developed BF before Chriss appears...
@@mikenomatter disrespectful??? 🤦♂️
@@mikenomatter He said LIKE Chris, not ONLY Chris.
@@mikenomatter Lol, is the woke mentality also hitting fpv now?
You're going to enjoy it, it is awesome!
Great first steps in bringing BF angle mode up to snuff! There is TONS of great things in Emuflight that we worked on and tested 1,000's of flights on that would improve it even more, reduce gimbal lock when reaching 90 degrees and smoothing out the whole angle system to give angle pilots tunable control and push the limits. Let's hope more advancements happen, but very happy to see Chris add some Angle Passion back to BF!
Mad props to Silver13 who first implemented all this over a decade ago in silverware and passed the knowledge and working example along for the rest of us to use in projects like quicksilver and betaflight. Great job getting BF up to speed!
Yep, bf has been behind the curve on this for a good while, good to see them getting up to speed.
Thank you Chris for what you do. FPV may be a small audience but you sir are very awesome. Thank you for helping us improve the world of FPV.
Thank you
Is there an update to this? When I go into the 'Do you want to test this build' comment, the 'assets' link no longer works :😟 In addition, any ETA on when this will actually be in the standard build? Thanks Again.. great video! )👍👍
I don’t want to sound like I know what I’m talking about but I thought I would post this comment / question. I have not looked at the Betaflight code and my experience with digital filters is primitive at best. But…
It seems like you are reinventing digital filters. And it seems like since a drone is physically not attached to anything else, it should be possible to get the precise mechanical response characteristics for the particular drone by inputting sin waves at various frequencies into the system to get the drone’s frequency response curve. Then use that curve to create a matching digital filter which will optimize (at least in theory), the responsiveness of that particular drone.
The idea would be to first get the drone to hover. Then wobble it at different frequencies on the three axes to get the response curve for each axes. Then compute the optimum digital filter for the drone for each axes.
hi,
every time I click the assets in github I get the message "Failed to generate URL to download artifact."I would appreciate any help.
I'm visiting Bangkok and flew a 80mm quad with a Vista off a rooftop restaurant. I used angle mode because I wasn't too familiar with the fairly small area and it made my landing more controllable (no inadvertent drifting over the rooftop ledge..)
Technically my wife was spotting but not reliably after a few glasses of wine 😄
So there are some benefits to angle mode but you have to fly it completely different to get proper cinematic footage.
I can't see this new parameters in the final 4.4. Do you have any information about when it's going to be part of the final version?
Man... the amount of value and improvement you bring to this hobby is just amazing. First you fixed frames and tuning for us... and now that angle mode! When I learned FPV, I quickly moved away from angle mode to Acro with my Tinyhawk... it just didn't feel well. You explained quite well why! This is gonna be an interesting change!
Thank you Chris!
As a almost daily fpv quad flyer for 10 years, I’m so satisfied/grateful with base/clean/Betaflight’s focused on 5 inch Rate/Acro mode all these years, as decent whoops only appear in the last 4 years…..And after 40+ years in this wonderful world of Land/air/sea R/C……the weakest link is still the Pilot…..get out and fly😎
Thanks for this info, updated my Holybro Kopis 2.5 whoop and it is much more responsive in angle now, had to adjust my rates a little but flies much better now 👍
Thank you so much for this Chris, this is exactly what I've been wanting the quad to feel like in angle mode! It is so much easier to fly now, so much faster as well. What a huge difference!
I gave it a try today, and I definitely like the improvement! I am able to fly into tighter gaps at home. Thanks for the great work, Chris!
Hi, what FC youre using, haven't tried it yet, my Fc is betafpv F411 1s 12A aio, and my current Firmware is BF 4.3.0 will i able to flash this in my current Firmware?
Next betaflight will have a new mode:
Acro, angle, horizon and Rosser mode! This looks so cool. I'm very interested in seeing how these changes would affect "level race mode"
Tested on a DIY 2" whoop, flying inside.
STM32F411 on a Happymodel ELRS X1 AIO 2-4S (CRAZYBEEF4SX1280). Caddx Vista, so a bit heavy at 78 g without battery & the motors are too small; 1202 8420KV's.
The only initial problem was the same as noted on comments in Github: ELRS was lost at first.
In CLI, "get express" - the AU domain after flashing is probably wrong and needs to be set again. Diff did not fix this, had to be manually changed.
Tested with the defaults (angle_feedforward = 50 and angle_earth_ref = 100).
*Very nice behavior.*
Finally this whoop runs OK in Angle mode. Was able to hit smaller gaps and fly much faster than with the regular 4.4.4 RC3 it had before this.
Rapid turns in tight spaces feel much better. Will test with different values later.
I really hope this gets into 4.4.0?
Also, thank you for explaining feed forward! I started flying in 2019 and got really interested in the technical side of things thanks to people like Joshua Bardwell. But NO ONE (no offense, UAV Tech :) could really explain the basics of tuning. They all tend to gloss over the most important concepts. In a matter of seconds, you just perfectly explained something that others have struggled to do.
Reminds me of the old rate gyros vs heading hold. I believe the issue then was the wind up of the loop that happened the longer you held the stick. Feed forward sounds like some extra gain on the stick authority that happens depending on the rate of initial stick change and again rate that it slows.
Someone really analyze something and is smart enough to change it :) GOOD JOB
Great! But what will happen, when the 4.4 is released? You will still have an option to download an automated build from this pull request with 4.4 and upcoming final releases?
Chris, this is awesome! Can't wait to give it a try, though I haven't flown angle mode in quite awhile. Hopefully this makes flying whoops in the house fun again, or at least a lot more fun!
'dump all' / 'diff all' are better for a config backup than just 'dump' / 'diff' as the 'all' backs up every profile not just the active one.
Tested it today, and I must say that Im very impressed. Its compleatly new mode... Its finaly usable as it should be
Thanks to you Chris, this feature is already incorporated in Betaflight 4.5. However, I have a query. When I tested the angle mode in Betaflight 4.5, it performed amazingly well, especially with the ease of turns with only yaw inputs given. How can I achieve the same "integrated roll" behavior in the acro mode? I couldn't find any setting options for this. When I attempted a brief flight in acro trainer mode and tried a turn using only yaw inputs, the craft seemed to lose its orientation. It converted the forward pitch into roll, which is indeed the core issue you described in the beginning of this video.
I only use angle mode on a temp switch on the right. If I ever get in a bind I can hit the switch and it levels out perfect.
I almost never use Angle/Horizon mode anymore even when flying inside but I found that Horizon mode and reducing the Horizon Strength gave me much better response. I've also played with Horizon Transition. I will certainly try this new setup to see if it's worth going back to self-leveling.
Yup, horizon mode loosened up ftw
I fly my cinewhoop indoors with angle strength at 10: it flies smooth, precise and awesome
Its great, but for me the biggest problem in angle mode is angle drift over time and after hitting gates, we need to rearm again to recalibrate angle.
turn on crash recovery
@@knightdeluxegaming it doesn't help with angle drift.
For racing with this it seems like you should put yaw on the right stick and only use that for turns.
Okay, freeze frame at 1:50 -- I know we're talking about angle mode and all but HOLY BEJEEZUS I've never seen a quad tuned so well! The stops on those snaps are like punching a brick wall.
Thanks for all of the great content Chris! I tried getting this to work but it failed. I was able to upload what look like BF 4.5 and tried reinstalling my profile and things were a mess. I too knew to this to really troubleshoot. I re-flashed it to 4.4 and installed my profile and now back in business. I may give it another poke in a few days.
Will these improvements be applied to Horizon mode as well?
Dayum, the responsiveness in angle mode went through the roof! Thank you so much!
Need to tune my Mob6 again with BF4.4, but I'll manage that somehow I guess.
The question I have is, can we put that yaw code on acro mode. It would be awesome to have lazy inverted yaw spins.
Like Always, the best explaining of PID Loops and the internals of an FC. 👍
But when will it make official release 4.5 or later? (To late for 4.4 I guess)
Thanks Chris, this will help newbie and tinywhoop a lot.
Awesome! I only use angle for take off in small areas
I sold my 'proper' favs (protek 35 & Cinelog 25) because of the hassle of the way they flew in angle, bought the avata and its just as bad at times, but without the ability to configure. Thinking I'll be buying the Cinelog 20 soon
Gr8 video, didn't ever think about angle VS acro mode being so different in terms of fundamental axes controls, particularly pitch/roll VS yaw in angle mode 💪👍
I have several different frames of your design.
I just did a comparison video of the 3.5 V2 and the 03 quite oblivious to the DJI 03 accomodation.
I have another video about the colored carbon. I see the 03 UL5 is now a longer fuselage. I really like the UL5 with tight bracing.
Hello Chris! Thank you for your work! This is very interest improvment.
I try to tune angle mode on my tiny whoop in BF 4.5 RC2 to follow your manuals in PR.
I understand not full, how can i tune feedforward smoothing.
Please, can you provide some screen shot from BlackBox explorer with good step response
angle debug parameters. That will be very helpfull.
i fixed my angle mode whooping a while ago, i put it in acro mode lol! i only ever use angle mode when im flying LOS while walking back from where ever i crashed lol
I run angle mode mostly as acro flips gives me motion sickness and ruins the hobby for me so I just race around in angle doing fast smooth lines. I notice angle mode the faster you get the less predictable it gets so the racers would really like these new settings .I also noticed angle mode is just that it needs to be at an angle to work properly too flat and its kinda crap so hopefully this helps with that aswell
I’m not yet flying but I thought that this slower response was the whole purpose of angle mode. I’m going to watch this, though, because you’ve got a great way of explaining things!
awesome change in angle mode Chris! this will be awesome for cinewhoops!
Rosser or Thompson?? lol. How about both!
I usually only fly acro in non windy conditions. So I mostly fly angle mode and have put up with the lack of responsiveness. The wobble explanation is pure gold and I never really understood why I got wobble in all my angle mode flying until viewing your details today on error's between the two co-ordinate systems. I hope enhanced/updated BF angle mode can make it to official BF release soon. Going to try this release on an F4 based whoop that I only fly indoors. Subbed!
Going to have to give this a go. I think the FF update will help dial in my whoop racing laps. Main issue I have though is flying micro whoops in angle mode and I bump into something, BF freaks out and tries to fly off in the opposite direction.
This sounds great. Which version of Betaflight will this be in? I don't see it in the release notes for 4.3, thanks.
Hello,does it work in horizon mode also ?........asking for a friend
betaflight showing video transmitter current values device ready says false....what to do? Please help....
Thanks Chris, I'm a bit late to the party on this great idea. Iv'e just tried this update on my mob6, it update fine, loaded the correct assets, when it tries to take off, it yaw spins and stops.... what have I missed or how to I get back to the original assets please. Thanks in advance. EDIT - the motors reversed tab needed clicking on... school boy error.....
Okay, so I installed 4.4, and I gotta say, it is indeed all that 'n' a bag o' crisps. Chris, my Man, you are indeed of Merlin-grade wizard stock. Angle Mode is at least a couple of orders of magnitude better now. I can do things with ease that took some effort before. And this after only flying a handful of packs so far. The switch was easy as cake, with no issues on either upgrade. Thanks much, Good Sir. Once again you've helped majik my little dudes into something wonderful.
So now that 10.9 is no longer in beta, does that mean I don't have to download the nightly Hex File anymore? (What I'm asking if it's now built into betaflight 10.9 full release?)
Thank you for your genius idea, uncle temperatur 😍👍🏻
As of late I have been trying to tune those exact things out of my TinyHawk2! Hope this works!
Hey Chris, I stumbled across this video for angle mode, searching for something different, and it's incredible insight into this mode! Great work! I learned a lot here, except I'm currently struggling with one aspect of the angle mode for cinewhoop filming. Everything is flying really slow and smooth in angle mode with the added ff feature but I have tried many setting changes to keep my throttle from bobbing up and down including the reference from your video pertaining to the throttle curve and expo. No matter what I do, I still have a slight movement up and down and can't seem to relax the throttle. It really comes through on the naked go pro footage as the horizon of an indoor atmosphere is moving up and down even after stabilization. Are there any extra tips you have that I can mess around with to get the perfect flight feel. Thanks in advance and for all you do for our hobby!
Since rescue mode uses angle mode this will help there too!
This feature would be nice for RTH and also for position hold.
This is really brilliant. Thank you, Chris
Can't seem to find a working assets link anymore...
Hello... no more links to assets! Please can you back it to working ❤
Never thought I'd see fuzzy logic applied in my favorite hobby
Very interesting and informative video. I still fly angle mode on whoops indoors. This looks like it will be very helpful. My favorite whoop to fly was the Alienwhoop Zero running NotFastEnuf Silverware. It was a ripper. 😎
Silverware is amazing. I have a brushed whoop running it, so smooth. Only my Mobula 6 has better handling
holy whoop batman - I didn't realize this! I've been flying the baby nano 20 and was trying angled for the first time since I learned how to fly.. I abandoned it cause I thought I just got too good for it. lol Thanks Chris for letting me know it was betaflight and not me flying brilliant. lol
This is awesome. Were the root causes (lack of feed forward, and yaw/roll using different control mechanisms) of these issues known ... or did you discover these through experimentation? Great job.
I "discovered" the issue or at least was the first to do work to improve the poor angle mode performance.
Hi thanks for the video, but I can't find the assets anymore, in the link, I'am using betaflight F41s12A aio
Interesting content, thank you for sharing 👍
Does this update also reduce the gimbal lock problem (which occures in angle-mode, when the pitch angle is 90 deg)?
I wonder, if there is a flight mode built with quaternions (where there is never a gimbal lock possible).
This is brilliant, going to try this! How does this compare with the mockingbird project work? Very interesting!
no more files i see, all closed up. Got a mobula 8 on 4.4.2 and Angle mode is rubbish. Acro is amazing. Any suggestions except wait for 4.5?
Do you think it could mess up GPS Rescue if it's set to initiate
Mmmmkay. I stopped this a minute in to say this should be good. I fly Angle exclusively, and I have my BF 4.3.2 rigs tuned to what I consider nigh-on perfect. I can't wait to see what else I can learn from Mister Wizard here. Teach me, my Sensei. . . your pupil abides.
Do you think this would be beneficial for 3.5" Cinewhoops and those few times I use angle mode for small spaces?
Should make a big improvement!
I have been using your v4.0 file on my 4" LR and have been very happy with the improvement in the way it flies in angle mode, I am about to replace the Vista on this quad with the DJI 03 air unit and would like to update to Betaflight 4.4 to get the latest OSD improvements, can I do this in a way without losing the angle mode improvements ?
Isn't what betaflight put in pretty much identical to the Emuflight angle code that's been around for over a year? A lot of things sound the same to me. In my opinion, angle mode is a very useful mode and is now very underestimated by new pilots. I know one reason is that people would rather commit to one flight mode for all quads. I can understand that, but especially with a micro whoop which flies significantly different to larger copters, I think you can also fly with different flight modes. Especially in whoop racing, angle racing makes progress very quickly. Of course, the skill cap of acro is higher, however it requires a lot of time and practice on the small whoops on tide tracks. Racing at a high level in angle is still hard enough and not easy. So try it! I also use angle on my cinewhoops in many situations.
btw: Isn't feedforward active in angle mode since 4.3?
Hello, this test no longer works today?, how can this be achieved today?, thanks
"asset" link is dead for me . Anyway thanks a lor for your knowledge
Just create an account
Any way to control the copter with angle commands via MSP from companion comouter?
I might be wrong but Emuflight has both Feedforward and DAS (dual a is steering) for a while now. Are these the same things you mention in this video?
Is this updated in the new version of BF 4.5?
The "Assets" link no longer works. And loading the GA 4.4 release doesn't have the options. Any idea how to get the new stuff now?
Nevermind. Didn't realize you had to be logged in. Would help if their error message said that rather than page not found,....
This was awesome Chris, I can't wait until this is included in the release.
This link is no longer available for download. Is there a newer version?
These changes have now been merged so the latest BF release has them
With this I lose some gps rescue features, this firmware does not include that.
Should we expect this in 4.5?
Yes, should be in there.
So if i have 4.4 i have this already? Before a watch the video. Acro snapping because the roll and pitch rate u enter. Make it 100 and it's slow to roll.
I usually up my angle mode to 80 strength and max angle 80 or max angle quad can do before falling out the sky at full throttle.
After watching. So this adds feedforward and more p to get rid of delay
Great new feature. Thank you so much.
after i installed this to my 2.5 4s its kinda acting like desyncing mot not shuts down. but one of the motors trying to spin faster with no reason. this can be the cause?
Looks promising, but I'm going to wait until 4.4 comes out as a proper release. All the issues Chris mentioned I seem to have well in hand, as my rigs already behave with alacrity and precision. I can wait, but I am keen to see what's next in 4.4. . .
Seems very worthy update for home whooping :) Will try when it will get released in official release.
Not sure if the files are removed they arent available
Just create an account
Hey Chris i am trying to flash my F722 board but i dont know what hex i should use.
Is it the F7X2 hex file?
I don't think I would have got into fpv if it wasn't for the slow responsive angle mode. Now I rarely use angle mode and always fly Acro
Acro but it was a beginning for me little over a year ago.......
Hey Chris, crackin video! Great explanations and solutions. Never even thoughts about these angle mode handling issues, just thought it’s angle mode… but these improvements are great, I gotta setup my tiny quad like this. Thanks for the video, Cheers!
Great work! The only sad thing is that it won't be shipped in 4.4 :)
Hi Chris, sorry for the dumb question but I'm getting a "Failed to generate URL to download artifact." error when I click on the "Assets" link. Do you have a suggestion ?
Found the answer to my question above. Looks like BF 4.4 needs Expresslrs v3.
@@kevinb6072 im getting the same issue. how did you solve the "Failed to generate URL to download artifact." issue?
Keeping yaw rotation around the earth’s vertical/z-axis (rather than the quad’s) is something that silverware has been doing for years. Imo that was the huge draw of NFE Silverware’s angle mode for brushed builds back in the day, and remains one of the main draws of modern day quicksilver.
Here’s hoping BF crash recovery and the gyro wind-up issue (not sure that’s the right term, but the thing where it doesn’t fly straight for a few seconds after hard crashes) are improved as well. Quicksilver still handles clipped gates/obstacles better than BF in whoops, imo.
It will be interesting to see how beta flights whoop Code stands against emuflight. With Dual Axis Steering they have other nice things done to the angel mode
Does the Aos5 v2 fit the o3 camera? Wanna buy one if it does!
I appreciate the explanation and work that went into this, but I can not imagine ever flying anything other than acro - I've been flying micros indoors for the past 4 years.
Tried flashing and it said "Firmware image contains addresses not found on target device" what did I do wrong?
Not sure. Make sure the hex is correct for the chip (F405, F722 etc.)
@@ChrisRosser Its a happymodel diamond f4 so it should be an f405 right?
@@-FARKI It's an F411
@@skree_fpv436 thanks now it worked! Im pretty dumb I guess.
@@-FARKI No problem. Glad you got it working.