I'm a proud owner of a 2000 black Firehawk and I love your car bud. Such an amazing time for that set up... I'm into autoX not qm runs but big props to you guys...
This gives me hope I can get mine in the 9's. I have a 6.0/80e etc.. built. I just need to do the turbo. Just crazy all the extra weight. I weighed 3680 with my set up and me in it. lol. I haven't gotten my cage in yet though.
Impressive numbers for that setup. Love the Trans Am content, keep it coming. Hopefully I'll get to see you one day at Capitol. Going to pickup my single turbo Trans Am 26 February 2022. Cars been in the shop for 15 months so I'm very excited.
There's a couple of guys who do head porting on the ol gen 2 LT1's. Lloyd Elliott I believe is one, I can't remember the other right now. Check out the grubworm Camaro, it holds the H pattern stick shift record. Some guys convert them to ls throttle body, and swap 1.7 rocker arms, and a cam of your choice, preferably a good custom grind. Have the bottom end drilled and tapped for splayed 4 bolt main caps, etc.
Congratulations on the personal best. You hit it out the park with the track having street cars running test & tune not laying the rubber that some cars need for maximum traction (like mine) 😂 I really wanted to get a good run when we lined up just to see how my car would fair hoping my MPH would keep it interesting. See you around ✌🏽
Thanks man! Yeah it always sucks having street tire cars tearing up the amazing prep Kyle lays down but it is what it is. Can’t be mad for people trying to join in on the fun. Can’t wait to be back at capitol again! This time with the Foxbody! 😈 see you soon! Next time say what’s up! 🤘
Hi there = I'm very impressed with times your TA was running = Did you change the Transmission & Rear-end in you hot rod = l was thinking these are a must when you have these kind of strip numbers = l have 1998 mostly stock TA = headers and ibac lowering kit = it has 30,000 miles on it VGC = Its not as Quick as I would like = But I'm not a motor head = Can a super charger & Cam & heads = be put into this stock engine without alot of other work ? I could see getting maybe 450 hp = with that being done = l dont Drag race = 95 percent ot the time I'm rolling 20 to 40 mph before I drill it = would you think the stock rear end and Transmission = would hold up to this kind of Driving ? Let me know what your opinion is Please = thank you Paul M.
Yeah this car has upgraded trans & rear end. But for what you’re doing the stock stuff with handle it, especially from a roll & not a hard launch on a sticky track. That’s what breaks drivetrain parts.
Hey bro is this stock bottom end correct? How much power was it running on this boost setting? Also you guys don't worry about rim spinning in the tire? I heard it slows it down a lot no?
I'm a proud owner of a 2000 black Firehawk and I love your car bud. Such an amazing time for that set up... I'm into autoX not qm runs but big props to you guys...
Thank you!
"Trans Am, what's your pleasures?" Quote from the movie that started my T/A connection. 😆
This gives me hope I can get mine in the 9's. I have a 6.0/80e etc.. built. I just need to do the turbo. Just crazy all the extra weight. I weighed 3680 with my set up and me in it. lol. I haven't gotten my cage in yet though.
How did you make it weigh so much? Stock is like 3400
Impressive numbers for that setup. Love the Trans Am content, keep it coming. Hopefully I'll get to see you one day at Capitol. Going to pickup my single turbo Trans Am 26 February 2022. Cars been in the shop for 15 months so I'm very excited.
Wow that’s a long time! Glad you like the videos. I’m sure we’ll cross paths sooner or later. Just make sure you come say hey!
Don’t blame other cars for not a good run on your part please. Drag racing is a brotherhood everyone is out there too have fun!!
my transmission guy looked back at me watching the video when he heard the oldsmobile take off, says he might need to fix that lol
Dang they let you run 9s with a roll cage? That track is lenient. Beautiful T/A nice work!
They’ll let you run 7s lol
@@BmoreFox sheeeeeesh 😅😅😅😅
The camera went bye bye on that first in car pass lol. Would love to see more in car passes. Love the stock gauge set up.
Same here! Gonna have to get some more in car shots!
Just got a 94 formula 6 speed with the lt1
Do you know any easy and beneficial mods for them? Love your car btw!
Probably heads & cam is a start.
@@BmoreFox yeah I’m planning on that and supporting mods, but I don’t wanna go too far in since it’s my daily lol
Yeah deff don’t want to over do the daily lol
There's a couple of guys who do head porting on the ol gen 2 LT1's. Lloyd Elliott I believe is one, I can't remember the other right now. Check out the grubworm Camaro, it holds the H pattern stick shift record. Some guys convert them to ls throttle body, and swap 1.7 rocker arms, and a cam of your choice, preferably a good custom grind. Have the bottom end drilled and tapped for splayed 4 bolt main caps, etc.
147 is movin!
For being a pig lol imagine the set up in something 1200lbs lighter lol
@@BmoreFox I did it with 2.0 it was nuts! Lol
@@BmoreFox Whatdya mean, pig? I prefer TANK...LOL
Congratulations on the personal best. You hit it out the park with the track having street cars running test & tune not laying the rubber that some cars need for maximum traction (like mine) 😂 I really wanted to get a good run when we lined up just to see how my car would fair hoping my MPH would keep it interesting. See you around ✌🏽
Thanks man! Yeah it always sucks having street tire cars tearing up the amazing prep Kyle lays down but it is what it is. Can’t be mad for people trying to join in on the fun. Can’t wait to be back at capitol again! This time with the Foxbody! 😈 see you soon! Next time say what’s up! 🤘
@@BmoreFox is there any way I could talk to you and get a little info on this build I’ll compensate for your time
Sure
Or message my dad on IG @71chevelle427
Hello one question? How many cfm is your electric fan? I have a configuration like your car but the temperature rises too much!
Hi there = I'm very impressed with times your TA was running = Did you change the Transmission & Rear-end in you hot rod = l was thinking these are a must when you have these kind of strip numbers = l have 1998 mostly stock TA = headers and ibac lowering kit = it has 30,000 miles on it VGC = Its not as Quick as I would like = But I'm not a motor head = Can a super charger & Cam & heads = be put into this stock engine without alot of other work ? I could see getting maybe 450 hp = with that being done = l dont Drag race = 95 percent ot the time I'm rolling 20 to 40 mph before I drill it = would you think the stock rear end and Transmission = would hold up to this kind of Driving ? Let me know what your opinion is Please = thank you Paul M.
Yeah this car has upgraded trans & rear end. But for what you’re doing the stock stuff with handle it, especially from a roll & not a hard launch on a sticky track. That’s what breaks drivetrain parts.
Is the 6.0 a stock bottom end? Is it ring gapped? I hear you have to gap the rings.
Yeah gapping the rings is a must for me. Some people let it slide though.
Do you just pull the pistons gap the rings and put it back all the same bearings and gaskets?
That slip looks great and that krinkle in the back is😍. I appreciate the shout out
I wish you got the good pass bro for your video! If you have an iPhone I’ll message it to you or email!
sick ride bro
Thanks man
Hey bro is this stock bottom end correct? How much power was it running on this boost setting? Also you guys don't worry about rim spinning in the tire? I heard it slows it down a lot no?
What cam and convertor combo do you guys run
Sloppy stage 2 cam, Jake’s lock up converter
Go Guido go Guido Go!
Movin! In the future will you make more no limit vids?
Hopefully soon bc I miss them!
Are you interested in selling your tune files for this build
I can make you one
@@BmoreFox how do I get in contact with you I'm really interested
Facebook/IG
How much boost? What's fuel system setup?
High teens. Dual 340 pumps & bosch 210s
@@BmoreFoxActually has dual 450LPH Walbros now.
great video, good stuff.
What’s the quickest mph you’ve gone?
It’s been 148 I believe
How much boost do you launch with?
Usually low like 3-5lbs
Looks like a fun car for sure, nice results as well💪🏻
Yeah deff can’t wait to see it turned up
Is this track in Louisiana ?
Nope Maryland
How much power is he making
Never been on a dyno but I’d guess 800ish
Nice!! Stock bottom end?? Also you know the torque converter setup?
@@rynoasphalt4172 It's forged bottom end LQ4. Triple Disc Jake's Lock-Up, 3200-ish stall
Is this 4200 with driver?
Yup
Do you want to sell the ECM from ws6?
Still runs on it lol
Foot brake?
Sometimes but not on these runs
Look good and run good 👍 👌
what weight? turbo? whp? building a 2002 Camaro curious on you setup!!
4200lbs
Forged 6.0
Vs next gen 7875
Maybe 750-800whp (never been on dyno)
@@BmoreFox thats moving for 4200lbs. Using the next gen 7875 myself! Good build man!
This is my dads. Follow more of it on IG @71chevelle427
@@BmoreFox how is that fbody 4200lbs?
@@Ws6Ms how is it not?
🔥🔥🔥
Damn that battery
Can't believe they won't take it as a core, LOL.
It’s seen better days lol
how in the shit does that car weigh 4200. curb weight stock is 3500
Read the comments
Iron block 6.0? 4000 pounds 😬
Yes sir
4200lbs lol how
Read comments above. I’m not repeating it again lol. Idk how y’all think 4200 is crazy when its 3700 or whatever from factory.
@@BmoreFox mine was 3400 with gas m6. So 800lbs am be a bit of weight lol
Well like I said read the comments. Everything done added weight to the car. Iron block, heavy 4l80, 9inch. All the stock stuff is half the weight lol
🤔 Promo'SM!!