Oh bummer man! Well get some rest and heal up, don't rush it. We'll be here waiting for you. So close on getting that Taco running, must be patient. Take care!
That press is nice to have. Doing things right is so much better than not. Give yourself a few weeks to heal. I don't use Instagram so I didn't know what was up.
I hope you feel better soon and thank you for the guest appearance of Mr. Claw Hammer, I get the biggest kick out of those who hate Mr. C. Hammer :) I watched you open that transmission up and all the gear shafts and shifting shafts I was thinking way above my pay grade but you made it look easy as always. I really enjoy your videos.
Man the older ya get the more it hurts! I can only imagine you were wearing all you gear because ya head is still ok 👍 Get well mate the only chill out thing I have in lockdown is your videos !!!
Hey Austin. I saw on another channel where they used a 3 arm puller on the snap ring groove of the bearing to pull it off when they couldn’t get behind the bearing. It probably doesn’t apply in your situation but it might be useful some other time. I enjoy watching you work, you are always so careful and precise. Good luck.
I love your work id love to purchase this build after your finished I love your work and how thorough you are. Please message me if this goes for sale. I love Toyota truck and would love one you’ve rebuilt
I'm really curious about the condition of the old bearings. I have a 1996 Tacoma 5 speed manual with 322K and the transmission seems fine. It will occasionally pop out of 1st at take off but not very often. Austin, could you tell if any of the bearings were actually bad? Best wishes for speedy recovery!
I am really bummed you got injured dude! No more so, I suspect than you are! My family and I pray for your healing and recovery and the doctors will know just what to do! Now, if that doesn’t work, my dad always told me to rub some dirt on it, suck it up and drive on! This of course was horrible advice, so listen to your doc’s, not my dad and get well soon!!! 🙏🏼📖 ✝️
Take your time to heal properly man. We’ll be here when you’re ready to proceed with the build.
Get well soon. Don't rush it, we'll be here when you're ready!
I need me to find a mechanic like this guy that takes pride on his work! Great stuff man.
I know these are not how-to vids, but it still amazes me how you make this look so easy. Good stuff.
Im glad it's just a wing/back issue and not more serious than that. God bless get well soon.
Don't rush it. We'll wait... Get well soon
Get well soon man. Take your time and heal up.
Hope you get better soon just don’t rush things. We’ll be here when you get back to work.
Thank you!!
Great work, so happy for you that you finally got a lift and can upgrade your tools
Get well soon. Take the time to totally heal. I rushed my recovery several years ago and now I am paying for it.
Oh bummer man! Well get some rest and heal up, don't rush it. We'll be here waiting for you. So close on getting that Taco running, must be patient. Take care!
Nice..
Hope you recover quick and feel 100% better
That's terrible to hear Austin. I hope you heal up quick!
Hope you are healed up look forward to more rebuilds
Hope you heal up soon. Take care of yourself my friend
Hope your feeling better. Can’t wait until your back. You are definitely entertaining and enjoyable to watch. Take care
Feel better and take care. Hope to hear about the update. We can wait for a new video. Concentrate on getting better.
Well that sucks... Get better, speedy recovery!
Get a well deserved break Austin, we will be here when you get back👍
get wel soon brother. take the time to relax a bit.
Love your videos and you are in my prayers for a quick healing.
Take care of yourself.
Sorry you had the accedent hope your recovery goes well. Just do what ever the doc says useally thats the quickest way to recover.
Get well soon hope to see you swinging them spanners again soon so we can all hear that tdi spooling
Get well soon Austin
health is more important. Take your time to get better. Update can wait. cheers.
Oh man that sucks get better soon brother, that’s 2 of my favorite UA-camrs down you and Chris from b is for build
Get well soon.
Get well and strong Austin. We really appreciate the content you produce, but your health is more important.
get well soon
Get well soon!
That press is nice to have. Doing things right is so much better than not. Give yourself a few weeks to heal. I don't use Instagram so I didn't know what was up.
Get well soon ….Your content is best out their…💪💪💪💪
Thank you!!
Dam dude glad ur ok hope you heal up fast!
Hope you have a speedy recovery and no surprises from the ortho.
Thank you!! I’m hoping so!
I hope you feel better soon and thank you for the guest appearance of Mr. Claw Hammer, I get the biggest kick out of those who hate Mr. C. Hammer :) I watched you open that transmission up and all the gear shafts and shifting shafts I was thinking way above my pay grade but you made it look easy as always. I really enjoy your videos.
Thanks man!!
Get well soon... 👍💪
Take care of yourself. I just had my third back surgery shit sucks..
We need peeps like u
Cheers to a speedy recovery.
Heal up man, we will be here waiting for you when you feel up to it.
Thanks!!
Great content as always. Hope you have a quick road to recovery. We're all pulling for you and will be here when you get back!
Thank you!!!
Get better Austin!
Get well my friend!! Wait till you try to do things you enjoy at 50! Lol takes longer to heal! 😊👍🏻
Dude leaving us hanging! Sorry you got hurt, hope it's not serious and you are back finishing up the Toy soon! Get well!
Great videos as always. I hope you have a speedy recovery.
Get better soon!
They don’t call em hurtBikes for nothing haha. Get well soon brother! Hoping for a full recovery.
Man the older ya get the more it hurts!
I can only imagine you were wearing all you gear because ya head is still ok 👍
Get well mate the only chill out thing I have in lockdown is your videos !!!
Get better fast buddy, best wishes!
Get well soon bro, rest up!
Will do! Thanks
Pretty good excuse. Get better!
Great job, hope you get better soon!
Get better man!
Glad your ok mate, hope you have a speedy recovery!!
Get well soon Austin 🤞
Feel better man!
Speedy recovery buddy..
Hey Austin. I saw on another channel where they used a 3 arm puller on the snap ring groove of the bearing to pull it off when they couldn’t get behind the bearing. It probably doesn’t apply in your situation but it might be useful some other time. I enjoy watching you work, you are always so careful and precise. Good luck.
That might work if the press isn’t too tight!
Get well man! Your videos are amazing. Cheers from Perú.
Thank you!!
This one time, at Dirt Bike camp, i was all Braap...then i was all Snapped!
Get well soon, Austin!
Wishing you a speedy recovery bro. Good video by the way
Thank you!!
Shit dude, sorry to hear you took a spill. Hopefully you have a quick recovery.
Thanks I’m hoping that too!
Get better quick man
Get well soon man!! I love your trucks and videos man!!!
I appreciate it!
@@austinniemela
I've been meaning to ask, what do you do for work man? Are you a mechanic?
Pneumatic press upgrade should be your next investment. It'll save you a bunch of time cranking down on that handle lol
Get well soon ✌️✌️✌️✌️We can wait 😉🙃
Hope you’re recovery goes quick and smooth Austin. Can’t wait to continue watching your great work 💪🏽
Thank you!!
Fuck the builds man just get better. We'll still be here after brother
great videos as always bro..get better soon
Great video hope you get better soon💪🏻
Thanks!
Get well soon brother ...or maybe I can take over the channel
Forgive me father,
For I have sinned,
I hit a 3rd gear jump,
5th gear pinned!
Yeah.. Been there, done that. Good luck on the recovery!
Thanks!! It happens!
Awesome vid, it was pretty cool watching you do a rebuild on that transmission. Hope your arm gets better.
Thanks!
Need to find less aggressive fun, Austin. I for one will wait patiently for your return !
These videos are so good man, keep it up!
Thanks will do!
Great video as always Bro get well soon 💪
How did the quality look on the Cobra rebuild kit? All OEM parts hopefully? Sourcing rebuild kits for these later R150F transmissions isn't easy...
Dam man get better I watch ur videos at work lol now what am i gunna do
I love your work id love to purchase this build after your finished I love your work and how thorough you are. Please message me if this goes for sale. I love Toyota truck and would love one you’ve rebuilt
damn. heal up ya legend 🍻
I’m tryin!!
hello great job would you please send me a link where i buy a set of gearbox bearings for land cruiser 70 year 1991 2.4 td. thank you very much
this is R150F transmission ,,,,,, can you tell me where is this model number punched on the body of this transmission ?
My 2004 Tacoma is stuck in fifth gear. Is there a way to release it without disassembling the tranny?
@ 5:41, Is that a new bearing retainer plate? if so, did it come with the kit? where was the kit from?
I have a link for the kit in description. It’s from cobra transmission
No rush bro , work on a merch drop ...
Funny thing, the Europeans are doing petrol swaps, and the Americans are doing diesel swaps... Go figure man, but your videos rock!
I'm really curious about the condition of the old bearings. I have a 1996 Tacoma 5 speed manual with 322K and the transmission seems fine. It will occasionally pop out of 1st at take off but not very often. Austin, could you tell if any of the bearings were actually bad? Best wishes for speedy recovery!
Actually these bearings feel really good!!
What the hell man?? I hope you get better fast. Ya, give us an update.
Yea it sucks! Broken bones take a bit to heal too 😡😡
@@austinniemela dang. Well get better. If I was closer to spokompton I would help you out!
I am really bummed you got injured dude! No more so, I suspect than you are! My family and I pray for your healing and recovery and the doctors will know just what to do! Now, if that doesn’t work, my dad always told me to rub some dirt on it, suck it up and drive on! This of course was horrible advice, so listen to your doc’s, not my dad and get well soon!!! 🙏🏼📖 ✝️
Thanks man!! Ill try the dirt haha
You probably get asked this a lot but are you related to Cameron Niemela that re-builds dirt bikes on UA-cam?
Yes we are brothers!
Just wondering if your family has any connections to Finland, because Niemela/Niemelä is finnish last name
Yes we are Finn!
🤩🥰😍😍🤩🥰😍
Where you out of? I would like to send you my 1992 toyota,
Doesn't need much work
Que estés mejor
Stop fuckin' around with them dirt bikes, man.
Get better Heath first.
+
Get well soon.
Get well soon