Broken Shovel Handle Replaced, Repair

Поділитися
Вставка
  • Опубліковано 15 січ 2025

КОМЕНТАРІ • 38

  • @Doris-y5v
    @Doris-y5v 5 місяців тому +4

    this man is typical 'old school'' the way he communicates

  • @gaylemcgee2221
    @gaylemcgee2221 Рік тому +3

    I don't blame you for repairing that well made shovel. I'd do the same thing.

  • @richardnoel5962
    @richardnoel5962 2 місяці тому

    While I had an idea on how to perform this task, you provided the motivation to combine two shovels - one with a broken handle and the other with a damaged/cracked blade that had been sitting in my garage for probably 20 years, may be more ... Thanks ! ;-)

  • @hudson8865
    @hudson8865 2 місяці тому

    Thank you very much Mr. Hardware.

  • @chrisberentson9602
    @chrisberentson9602 Рік тому +1

    Thanks so much for this great tutorial!

  • @kenrandall4753
    @kenrandall4753 6 місяців тому

    One of the most informational video on this topic. Great Job!

  • @rickyserna1787
    @rickyserna1787 11 місяців тому +4

    Thank you👍, also for the TIP of the ALL-GRAINS GO FACING UP,
    so it does not brake again.
    NOTE: the reason not to use screws is because vibrations unscrew all screws (physics 101)

    • @elvism684
      @elvism684 10 місяців тому +2

      Stainless Bolt and Nut with blue lock tite A little more pricey but easier to change the handle when needed.

  • @mikeforster8798
    @mikeforster8798 9 місяців тому +1

    Excellent instruction and video. Thanks for showing how to do this repair

  • @BugBrand
    @BugBrand 10 місяців тому

    Great video - detailed but concise - thanks!

  • @tonyholt90
    @tonyholt90 8 місяців тому

    Thanks I had a rough idea but watching your video was really really useful, many thanks 👍

  • @SanDunn9122
    @SanDunn9122 Місяць тому

    great video!!

  • @sasquatchtv4157
    @sasquatchtv4157 6 місяців тому +2

    That’s a Jackson pony shovel I believe, that’s a great store too.

  • @Gkimble
    @Gkimble 6 днів тому

    Thank you sir

  • @Ryan-dk9sn
    @Ryan-dk9sn 8 місяців тому

    Thanks for the video - definitely appreciated several of the tips!

  • @patribtr
    @patribtr 4 місяці тому

    very helpful, thank you

  • @leepiper4621
    @leepiper4621 Рік тому +1

    Excellent

  • @mikmmahon2231
    @mikmmahon2231 3 місяці тому

    Brilliant.

  • @moogman5
    @moogman5 4 місяці тому

    Great , helpful video...Thank you sir!

  • @phillyfathead
    @phillyfathead Рік тому +1

    Yes, a good tip !!!

  • @Fundaykidzz
    @Fundaykidzz 2 місяці тому

    Great video great job

  • @tzee7945
    @tzee7945 4 місяці тому

    Great video Thanks for the pro tip! I was just wondering if there's any way to get the rivet off 🎉🎉

    • @MrHardware1
      @MrHardware1  4 місяці тому

      @@tzee7945 try this video, ua-cam.com/video/oSq_D0pY6JM/v-deo.htmlsi=EiTbDkGLV8zCvPa8

  • @ricknelms
    @ricknelms 5 місяців тому

    excellent

  • @jrod1077
    @jrod1077 9 місяців тому

    What if you have an older tool that only has a rivet hole on one side, versus going all the way through like the one in your video. I have an old cultivator with a rivet hole on the top and one on only one side. Do you use some form of blind riveting technique?

    • @MrHardware1
      @MrHardware1  9 місяців тому

      That’s when I use a 1 inch by number 10 Panhead sheet metal screw. I put them, with small pilot holes so it doesn’t split the wood, to secure the shovel. That should be all you need.

    • @jrod1077
      @jrod1077 9 місяців тому

      @@MrHardware1Appreciate the reply...thanks. Just curious - I have an old hoe that has the same configuration and it has rivets versus screws. Any idea how they did that type of riveting back in the day?

    • @MrHardware1
      @MrHardware1  9 місяців тому +3

      @@jrod1077 in the old days you took a mild steel rod, clamped it in a vise, pounded on the end until it mushroomed and created a head. The cut it 3/16 longer than the
      Length required, placed the mushroom head against the vise or an anvil and then pounded a mushroom head on the end of the rod. 5 minutes to create and install a rivet.

  • @AIJohnsen
    @AIJohnsen Рік тому +5

    Can you put a washer on the rivet before you peen it over?

    • @MrHardware1
      @MrHardware1  Рік тому +3

      I’ve had to do that when the shovel had an oversized hole.

  • @axminsters
    @axminsters 21 день тому

    why not just put screw and bit of wood pull it out..instead of drilling

    • @MrHardware1
      @MrHardware1  20 днів тому

      @@axminsters sometimes the wood has adhered to the steel in such a way that it does not break free. Drilling the holes, loosens the grip of the wood on the steel and then makes it easier to get the rest of the wood out.

    • @axminsters
      @axminsters 20 днів тому

      @@MrHardware1 well heat up the metal with blowtorch

    • @MrHardware1
      @MrHardware1  19 днів тому

      @@axminsters I’ll try that on the next one

  • @cathyharder6546
    @cathyharder6546 5 місяців тому

    You need a better camera person.

  • @davidsauerwrx7460
    @davidsauerwrx7460 3 місяці тому

    Excellent! Wow, I learned a few good tricks, Thanks! Dave WRØX