Cody-this was the video that I discovered your channel with. Been watching for 5 years now. Going back and re-watching it now...my how time has passed.
I think the best part of your channel is that you often show a way of doing things without expensive tools. It is really helpful for us folks who can't afford those kind of things.
Your ethis on repair/reuse/recycle is fantastic. Looking after your tools is something you rarely see now unfortunatlely - I have been guilty of doing such things, but in one short video, you have taught me many skills and techniques, which I hope I can use myself one day.
Hey Cody. I’ve been a subscriber for 7 years. This was the video that led me to your channel. I just re-watched it right now for nostalgia. I hope everything works out up in those fires your fighting in OR.
Hey Cody i know this is odd but you have really got my juices flowin with this channel of yours. I love it.! You and" The Boss of the Swamp" have brought me back to the center. Thank You.Yesterday i purchased a old axe at an estate sale for 10 dollars and spend a whole sunday restoring it. Probably not worth anything ,but to me it was.I appreciate all the effort you put into your videos and am grateful for the information you provide. Keep them things coming! I dropped cable TV cause you guys make better stuff.P.S.Boiled Linseed oil is the bomb for handles!!! No more varnish on my tools. God Bless.
Found a nice little W44 shovel cleaning out the shed at the family cabin after it sold. needed a handle. So glad I watched this video! Thank you so much, 100 stars. Peace be with you!
Thank you for these videos, doing my shovel I broke this morning as we speak! A whole 7 years after you posted this video. I cannot count how many times I've relied on your videos to tackle something I'm not familiar with. Thank you sir!
Only thing nicer than a newly finished Beloved tool is coming across a how to do video in time to get it done right!! Thanks and remember the basics!! 🙏
This is the video, I can not love it enough. I restored my shovels from this video- and will purchase a makers mark that I have designed. I believe that there is heart and skill in restoring rather than replacing- that and pride in quality is what being a craftsmen is all about. Really felt your emotion in that end conversation. A comment on how you make videos, Mr W. I love how this video went condensed information first then conversation. What would make it better is a voice over explaining what you are doing, why you are doing it, and what folks with less shop tools can do. I.e. explain vertical grain, why the bevel goes on top, thompsons water seal the handel, and where one could get a makers mark.
This is perfect. My grandfathers shovel just broke on me and I couldn’t bear thinking of replacing it. I wanted to learn how to restore it and this video will bring honor back to my grandfathers shovel. I’m keeping the old handle too, his sweat is in that handle.
You have again inspired me. After picking up a few old ax heads on Craigslist and putting new handles on them, I picked up two old US made shovel heads for free and will be embarking on that project next. Thanks for the info.
I will go one further with restoring older tools. Having inherited tools from two sets of parents, I have plenty of them, most I don't use. My son recently became a homeowner with few resources. I have been picking out many tools, restoring them to their former glory by cleaning, painting and lube, and giving to my son to use. Thanks for all that you do to help us restore stuff that most people throw away.
This came up as an auto play after your latest One Wheel video. The video and audio quality you’ve made in 8 years is incredible. This is still a great Wranglerstar tool review though. You had it from day one. 👍🏻
Thank-you for the audiobook recommendation. I found it, here on UA-cam. It may not last as long as your repair, but I just replaced the handle of a favorite, Amish made, forged hand cultivator tool. I packed the slightly cracked socket with wood putty and tapped it back in. I don't have the tools you do and needed to get it back in service. Once it sets up, I'll sand & oil it. I hope since it doesn't take the full weight that a shovel does, or the prying, that it will get me by, until I can find the right matching handle for it. I learned to love old tools, from my mom. Your craftsmanship is laudable. They look beautiful & most people I know, don't even know that a shovel is supposed to have an edge.
Nice job on the video Cody. You are very through and there were many many tips in the vid. There are a lot of men that have not been exposed to what you have on your channel. I know you are making a difference in peoples life's. I think I will make my own makers mark, it adds something special to the work/project. Take care Dave
Just came across this video today. You just had your 1 million subscriber party. Congrats on the success! I've been watching for years now, probably since 2013/2014. Enjoy your content and it has helped me a lot
Now that was a great video! Not only the care you are taking to do it right, but the small learned stuff that you interject in teaching (sandpaper/paint tips etc..) are very much appreciated. Never looked for downloadable books from the library, so thanks for that tip as well.
I brought a brand new spade a few years ago, the first time I went to dig a hole in simple dirt, the blade bent. So now I only look for old spades and shovels, that have proven themselves with the test of time! Thanks for sharing another excellent video.
Cody, thank you so much for taking the time to do a process video about this...I am confident that the shovels I will be re-handling for my husband will come out great! I just have to do it when he's not around so the surprise won't be spoiled! Thanks again! I look forward to seeing the next ones! God Bless!
I've restored three shovels so far using this video as my coach. The bolt and nylock nut works great if you cant make rivets. I'll get a torch someday... Thanks, Cody (as usual).
This is fantastic information. For the last year I've wanted to rivet (rather than bolt) a shovel handle but didn't know how to do it. Truly appreciate your craftsmanship and philosophy.
Very good job!! Always enjoy your videos. They have helped me out alot over the years. Thanks for bringing the "Old Ways" that our grandfathers taught us back to the modern world we all know now. Cheers
Greetings from the UK and thank you for posting this useful video. Your method of using a belt sander to form the taper on the new handle is both simple and effective. I have an old fork, not sure what its proper job was but it's perfect for picking up privet hedge cuttings, and I was gutted when woodworm got at the handle and it broke. Now it has a new handle, I know I couldn't have bought a new tool half as good so I'm well pleased. I gave the new handle a few coats of clear preservative before applying linseed oil, hopefully that will keep the worm at bay. I also made rivets out of some large round nails I had, as these already had heads formed on them.
Nice work Cody, I like the little tips you give, like turning the paint can upside down, these seem to stick with me and have got me out of a jam now and again.Thanks for sharing
very useful, I have my grandparents old shovel heads. Thank you. Your calipers could be used to radius the tip of the original and then used as a compass to scratch out the the circumference on the new handle.
Really helpful! A little intimidating--wish I had all the right equipment! But really, you are clearly a true artist craftsman, committed to quality--and sadly that runs counter to our culture these days. Great to have inspirational examples of a better (and more sustainable) way.
Was a bit concerned we might not get to the point and get on with things when I saw how long the video was, but great content, to the point and great tips along the way. Especially love the hot rivets, was wondering how that was done.
This was the first video of yours that I watched. That was a few weeks ago. I enjoyed this video, especially how you went into great detail of the steps you took. Now I'm hooked. Thanks.
Great presentation on so many levels, including referral to why do it in the first place. Learned much. Adding this to my favorites so I don't lose track of it for future reference. It's time I order a makers mark as well. Shoulda done it a long time ago. Regardless of the quality that I do or don't achieve, I should be accountable for it. (Plus, where applicable recessing a penny for a date stamp.) Thanks for continued inspiration in faith, values, & technique.
Love hearing your confident opinions! Excellent instructional. I done broke my old landlords flat shovel that may be as old as me, see if I can wrangle me up a stick o wood to properly fit it. Likely a SS bolt for my procedure.
thanks for this interesting and well done presentation--I sure dont have the shop or tools you have but have been re-handling a certain type of shovel used in the commercial harvesting of an expensive sea food product. The American made shovel heads were discontinued in the late 1960s, but are still the industry standard-because of the high quality of the steel used in the post WWII era used in the manufacture. Once in a while you come across them in garage sales and junkstores-they have short handles which need to be replaced so the shovel can go in the deep water where the action is. Its all about the fitting--getting the taper on the wood right so its snug in the socket--I've used cold rivets when I can find them..have used heavy copper wire the kind used on telephone poles for rivets too...strrip the inuslation off and some of its thick enough and stiff enough to use as a rivet and its easy tap and file a nice neat head....
Rob Heine lol, it wasnt like it was a permanent fix--handles were swapped fequently--best thing abot it was that it worked -one thing we dont do is put paint--if you use a shovel as a tool and not a wall mount paint wont stay on the blade or handle
It's an older but still very helpful video! I just bought my first house, and I'm starting from scratch with tools. I was cleaning some things out and found the remnants of an old shove, with a rotted off handle. The shank is bent, and there's a decent bit of surface rust. This shovel was literally buried in the fire pit, but once I clean it up and replace the handle it will be perfectly serviceable. Any advice on removing what's left of a soggy old handle?
@@JonnyDIY It won't budge, and that's why I asked. I've mostly put it aside as it's not a really high priority project, but both rivets have been removed, and the handle will not move whatsoever.
Was just thinking again. Could probably drive a small chisel or flat head screwdriver with the grain of wood and split the wood a few times and then remove smaller pieces. One you get a couple chunks out should all come out 👍🏻
Great tutorial! Thanks for the plug for library downloadable audio books! I'm looking for a tip on how to remove a handle on a digging fork that broke off right where the metal shaft ends. I am guessing it needs to be partially drilled out, which means no template to use for the replacement handle.
Cody, around SC, very few stores are selling replacement handles for the smaller tools. I am rebuilding some hatchets and couldn't find any handles in the area. I finally ordered them from Bailey's. The larger items such as sledges, axes, and picks are available, but nothing for the smaller tool such as shovels, rakes, hoes, or hatchets.
I really want a workshop so I can do things like this. It just looks enjoyable. I am planning for next Spring to get one built with a bit of luck and savings.
I jus bought one of those angle grinders. I haven't had a chance to use it yet. What do you mean by a proper air compressor? I like your videos. Very educational.
Thanks good video. I am pepairing old broken tools for a charity project, didn't think of heating the rivet so very helpful video, looks almost better than new, I stand it upright after the oil so some tracks down into the socket, if you canoot source rivets 50r 6inch nails work too but you do need to anneal them.
Watched your channel for many years, W. I’ll be honest with you: the past couple of months I’ve started thinking you’d gone a bit arrogant. I don’t even know why specifically, truth be known. I clicked on this video due to the age of it alone and was reminded why I started watching your content in the first place. Refreshing “retro0 Wranglerstar. I’m still here and still a fan, brother. Hope you and your family have a good one!
Hi great video! I my rake handle and head just came apart. I can't seem to find a good video on how to fix a rake. Do you by chance have a video or plan to make one? Thanks.
For when I do wood working and making tables, chairs, shelves, etc, I have discovered all that you need is a 100 and a 220 grit paper. After I put my first layer of varnish down I take my used 220 and go over and over again, I repeat it until it is my satisfaction. Then my final is a light sand with 600 grit, most of the time you don't need it though. Just a thought!
Luv the video, just one small point if you have gone to all the trouble of rubbing the handle down to rid it of varnish doesn't it defeat the object by spray painting the top?
Great video, I have always refurbished my own tools etc. Relatives always ask, why am I so cheap? I'm not, when you work hard for something take care of it. Thank you for posting this informative video. Peace!
Very good instructions. I have a boar spear head that I need to attach to a shaft/handle. It is very similar in design to a shovel. I don't have any shop equipment to forge my own rivets. Don't want a bolt/nut sticking out either. Do you have any suggestions? Thanks.
I have a very old offset shovel similar to the one in this video, but the end of the handle is curved and goes very deep into the socket, nearly to the step. Where can I get such a handle?
Cody, I have two questions not addressed in your video. First is how to get the broken shovel handle out of the shovel head? Yours came out very easily in your video, but I spent well over an hour trying to get mine out and I broke the tip off of one of my favorite flat screw drivers trying to pry the handle open in order to get a punch out that was stuck inside in the wood of the old handle. I was using the punch to try and drive the broken handle out, but it would not budge. It was very difficult and frustrating and the whole time I kept thinking that there must be a trick to it. My second question is how to get the new handle to bend inside the shovel as it begins to curve towards the shovel head itself? My old handle actually bent and went deep into the shovel handle shaft. Sorry for my poor description as I obviously do not know the proper terminology. Thank you, Cody.
Rick Pittser I've had good luck burning out he hold handle if it broke off too close to the shovel head to get a good grip on the old wood. Don't need to burn the whole thing to ash, just scorch it some and it'll loosen up. Maybe not ideal, pumping that much heat into the metal, but I'm not dealing with vintage or FS tools, just box store shovels. As for the curve, if it is a gradual enough curve you may be able to hand shape the new handle to follow the curve. Otherwise you might be stuck buying a pre-curved handled and try to find one that has decent grain orientation. There's also the option of steam-curving a handle end to fit, but I'm not sure how that would affect the strength of the socket end.
Enjoyed the clearly explained, well depicted video. Why not treat the handle at the shovel end? Doesn't it take the most abuse? It has two holes allowing water intrusion, is repeatedly stressed, and is exposed to various conditions and substances. Thanks.
Hi Cody, Huge fan of your work. Wonder if you might tell us about your branding tool? I've been searching for a couple weeks now to no avail. In one of your videos you made reference to a bread brand and only doing work you are willing to brand. That has stuck with me ever since.
Cody-this was the video that I discovered your channel with.
Been watching for 5 years now.
Going back and re-watching it now...my how time has passed.
I think the best part of your channel is that you often show a way of doing things without expensive tools. It is really helpful for us folks who can't afford those kind of things.
I'm a Librarian, and your PSA about the audiobooks was wonderful. I was feeling like kin with you before this, but you just settled the deal. Awesome.
Came back to this and it reminded me of better days.
Your ethis on repair/reuse/recycle is fantastic. Looking after your tools is something you rarely see now unfortunatlely - I have been guilty of doing such things, but in one short video, you have taught me many skills and techniques, which I hope I can use myself one day.
Hey Cody. I’ve been a subscriber for 7 years. This was the video that led me to your channel. I just re-watched it right now for nostalgia. I hope everything works out up in those fires your fighting in OR.
A classic wranglerstar video. These are the reason why I subscribed, love them.
Hey Cody i know this is odd but you have really got my juices flowin with this channel of yours. I love it.! You and" The Boss of the Swamp" have brought me back to the center. Thank You.Yesterday i purchased a old axe at an estate sale for 10 dollars and spend a whole sunday restoring it. Probably not worth anything ,but to me it was.I appreciate all the effort you put into your videos and am grateful for the information you provide. Keep them things coming! I dropped cable TV cause you guys make better stuff.P.S.Boiled Linseed oil is the bomb for handles!!! No more varnish on my tools.
God Bless.
+corey gillum Thank you Corey.
+Wranglerstar what would you suggest to do to a shovel if you have a lot a clay in the soil where you live
more like a knife
With what handle the chovels
Found a nice little W44 shovel cleaning out the shed at the family cabin after it sold. needed a handle. So glad I watched this video! Thank you so much, 100 stars. Peace be with you!
Thank you for these videos, doing my shovel I broke this morning as we speak! A whole 7 years after you posted this video. I cannot count how many times I've relied on your videos to tackle something I'm not familiar with. Thank you sir!
Only thing nicer than a newly finished Beloved tool is coming across a how to do video in time to get it done right!! Thanks and remember the basics!! 🙏
This is the video, I can not love it enough. I restored my shovels from this video- and will purchase a makers mark that I have designed. I believe that there is heart and skill in restoring rather than replacing- that and pride in quality is what being a craftsmen is all about. Really felt your emotion in that end conversation.
A comment on how you make videos, Mr W. I love how this video went condensed information first then conversation. What would make it better is a voice over explaining what you are doing, why you are doing it, and what folks with less shop tools can do. I.e. explain vertical grain, why the bevel goes on top, thompsons water seal the handel, and where one could get a makers mark.
This is perfect. My grandfathers shovel just broke on me and I couldn’t bear thinking of replacing it. I wanted to learn how to restore it and this video will bring honor back to my grandfathers shovel. I’m keeping the old handle too, his sweat is in that handle.
Kid broke the shovel today. Somehow I knew you'd come through for me. Thanks again!
You have again inspired me. After picking up a few old ax heads on Craigslist and putting new handles on them, I picked up two old US made shovel heads for free and will be embarking on that project next. Thanks for the info.
I will go one further with restoring older tools. Having inherited tools from two sets of parents, I have plenty of them, most I don't use. My son recently became a homeowner with few resources. I have been picking out many tools, restoring them to their former glory by cleaning, painting and lube, and giving to my son to use. Thanks for all that you do to help us restore stuff that most people throw away.
This came up as an auto play after your latest One Wheel video. The video and audio quality you’ve made in 8 years is incredible. This is still a great Wranglerstar tool review though. You had it from day one. 👍🏻
Thank-you for the audiobook recommendation. I found it, here on UA-cam. It may not last as long as your repair, but I just replaced the handle of a favorite, Amish made, forged hand cultivator tool. I packed the slightly cracked socket with wood putty and tapped it back in. I don't have the tools you do and needed to get it back in service. Once it sets up, I'll sand & oil it. I hope since it doesn't take the full weight that a shovel does, or the prying, that it will get me by, until I can find the right matching handle for it. I learned to love old tools, from my mom. Your craftsmanship is laudable. They look beautiful & most people I know, don't even know that a shovel is supposed to have an edge.
Nice job on the video Cody. You are very through and there were many many tips in the vid. There are a lot of men that have not been exposed to what you have on your channel. I know you are making a difference in peoples life's.
I think I will make my own makers mark, it adds something special to the work/project.
Take care Dave
Just came across this video today. You just had your 1 million subscriber party. Congrats on the success! I've been watching for years now, probably since 2013/2014. Enjoy your content and it has helped me a lot
This job was crying out for a spokeshave having said that you always have something good to teach. Thank you.
Miss the good ole days @Wranglerstar
Nothing feels nicer than holding a freshly resorted quality tool in your hands
Now that was a great video! Not only the care you are taking to do it right, but the small learned stuff that you interject in teaching (sandpaper/paint tips etc..) are very much appreciated. Never looked for downloadable books from the library, so thanks for that tip as well.
I ,love the quality , the attention you give to what you do. Proud & honour. Thank you.
This is an excellent video. My old shovel's handle needs replacing and I'm going to take a shot at it, thanks to you.
never knew there was so much in installing a shovel handle. Thanks for you time in teaching up the finer things in keeping our tools in working order.
I brought a brand new spade a few years ago, the first time I went to dig a hole in simple dirt, the blade bent. So now I only look for old spades and shovels, that have proven themselves with the test of time! Thanks for sharing another excellent video.
Cody, thank you so much for taking the time to do a process video about this...I am confident that the shovels I will be re-handling for my husband will come out great! I just have to do it when he's not around so the surprise won't be spoiled! Thanks again! I look forward to seeing the next ones! God Bless!
You have a very well equipped workshop there. How about a video for mortals with hand tools?
I've restored three shovels so far using this video as my coach. The bolt and nylock nut works great if you cant make rivets. I'll get a torch someday... Thanks, Cody (as usual).
This is fantastic information. For the last year I've wanted to rivet (rather than bolt) a shovel handle but didn't know how to do it. Truly appreciate your craftsmanship and philosophy.
+Greg T. Duym glad this helps.
Thanks again for another great video. Appreciate your perspective on "restoring" rather than "replacing".
Very good job!! Always enjoy your videos. They have helped me out alot over the years. Thanks for bringing the "Old Ways" that our grandfathers taught us back to the modern world we all know now. Cheers
Block sand when possible for straight sanding. Love the care to detail you have in all aspects from film to work. " See you on the next video"
Great video, sharp insights. Love the philosophie of restoring old hand tools to avoid constantly bying! Respect!
Lots of great stuff, I remember my dad showing me a lot around sandpaper and so forth. You explain things so well, and have great recommendations.
Thank you so much, Cody. Your channel means the world to me. Greetings from Holland.
Fascinating process. Been meaning to rehandle one as soon as I got a round tuit. I already have a square and a triangle tuit. Just need the round one.
Beautiful job! And smart tip about the orientation of the grain 👍🏻
Greetings from the UK and thank you for posting this useful video. Your method of using a belt sander to form the taper on the new handle is both simple and effective. I have an old fork, not sure what its proper job was but it's perfect for picking up privet hedge cuttings, and I was gutted when woodworm got at the handle and it broke. Now it has a new handle, I know I couldn't have bought a new tool half as good so I'm well pleased.
I gave the new handle a few coats of clear preservative before applying linseed oil, hopefully that will keep the worm at bay. I also made rivets out of some large round nails I had, as these already had heads formed on them.
Nice work Cody, I like the little tips you give, like turning the paint can upside down, these seem to stick with me and have got me out of a jam now and again.Thanks for sharing
very useful, I have my grandparents old shovel heads. Thank you. Your calipers could be used to radius the tip of the original and then used as a compass to scratch out the the circumference on the new handle.
Great work. Kudos for repairing ya old tools and promoting US gear. Cheers form Bathurst NSW Australia.
Really helpful! A little intimidating--wish I had all the right equipment! But really, you are clearly a true artist craftsman, committed to quality--and sadly that runs counter to our culture these days. Great to have inspirational examples of a better (and more sustainable) way.
Was a bit concerned we might not get to the point and get on with things when I saw how long the video was, but great content, to the point and great tips along the way. Especially love the hot rivets, was wondering how that was done.
This was the first video of yours that I watched. That was a few weeks ago. I enjoyed this video, especially how you went into great detail of the steps you took. Now I'm hooked. Thanks.
changed my first shovel handle! thanks so much for the video! love all your stuff!
Great presentation on so many levels, including referral to why do it in the first place.
Learned much. Adding this to my favorites so I don't lose track of it for future reference.
It's time I order a makers mark as well. Shoulda done it a long time ago. Regardless of the quality that I do or don't achieve, I should be accountable for it. (Plus, where applicable recessing a penny for a date stamp.)
Thanks for continued inspiration in faith, values, & technique.
Man, that shovel looks so clean now. I can't wait to redo mine. And nice touch with the makers mark.
Love hearing your confident opinions! Excellent instructional. I done broke my old landlords flat shovel that may be as old as me, see if I can wrangle me up a stick o wood to properly fit it. Likely a SS bolt for my procedure.
thanks for this interesting and well done presentation--I sure dont have the shop or tools you have but have been re-handling a certain type of shovel used in the commercial harvesting of an expensive sea food product. The American made shovel heads were discontinued in the late 1960s, but are still the industry standard-because of the high quality of the steel used in the post WWII era used in the manufacture. Once in a while you come across them in garage sales and junkstores-they have short handles which need to be replaced so the shovel can go in the deep water where the action is. Its all about the fitting--getting the taper on the wood right so its snug in the socket--I've used cold rivets when I can find them..have used heavy copper wire the kind used on telephone poles for rivets too...strrip the inuslation off and some of its thick enough and stiff enough to use as a rivet and its easy tap and file a nice neat head....
Rob Heine
lol, it wasnt like it was a permanent fix--handles were swapped fequently--best thing abot it was that it worked
-one thing we dont do is put paint--if you use a shovel as a tool and not a wall mount paint wont stay on the blade or handle
very good....just broke my shovel handle....this is a big help...cheers from donegal,,,,,
Real nice. I would love to hang with this guy for a week. I would learn so much.
Good information. I used this video to replace the broken handle in my old shovel. Thanks for the help.
great work as usual Cody....can't wait to graduate and settle down some where and have a shop of my own.
It's an older but still very helpful video!
I just bought my first house, and I'm starting from scratch with tools. I was cleaning some things out and found the remnants of an old shove, with a rotted off handle. The shank is bent, and there's a decent bit of surface rust. This shovel was literally buried in the fire pit, but once I clean it up and replace the handle it will be perfectly serviceable.
Any advice on removing what's left of a soggy old handle?
Once you grind off rivets, old remnants will slide right out 👍🏻
@@JonnyDIY It won't budge, and that's why I asked. I've mostly put it aside as it's not a really high priority project, but both rivets have been removed, and the handle will not move whatsoever.
Was just thinking again. Could probably drive a small chisel or flat head screwdriver with the grain of wood and split the wood a few times and then remove smaller pieces. One you get a couple chunks out should all come out 👍🏻
What paint do you use on the handle that adheres to the oiled surface?
Your videos are such a blessing! Thanks for your hard work and effort, I always learn so much. ;)
Great tutorial! Thanks for the plug for library downloadable audio books! I'm looking for a tip on how to remove a handle on a digging fork that broke off right where the metal shaft ends. I am guessing it needs to be partially drilled out, which means no template to use for the replacement handle.
Cody, around SC, very few stores are selling replacement handles for the smaller tools. I am rebuilding some hatchets and couldn't find any handles in the area. I finally ordered them from Bailey's. The larger items such as sledges, axes, and picks are available, but nothing for the smaller tool such as shovels, rakes, hoes, or hatchets.
I really want a workshop so I can do things like this. It just looks enjoyable. I am planning for next Spring to get one built with a bit of luck and savings.
I saw this vid uploaded right after after i found a broken shovel! Thanks very much for the tips.
Thanks for showing us how to break a shovel handle.
I have not had any trouble cold forging rivets when I replace handles on shovels...it just takes a little more hammering.
Cody, how much rivet protrudes when you cut it to length? I broke my shovel a couple weeks ago so your video has perfect timing! Thanks!
"People who buy things are suckers."
- Ron Swanson
I jus bought one of those angle grinders. I haven't had a chance to use it yet. What do you mean by a proper air compressor?
I like your videos. Very educational.
Thanks good video. I am pepairing old broken tools for a charity project, didn't think of heating the rivet so very helpful video, looks almost better than new, I stand it upright after the oil so some tracks down into the socket, if you canoot source rivets 50r 6inch nails work too but you do need to anneal them.
Our society has been taught to throw away, buy new...great point... We need to learn more hands-on...
Excellent video, great lesson...
I've listened to hundreds upon hundreds of audiobooks while working, and I still associate some completed projects with certain books I enjoyed.
Watched your channel for many years, W. I’ll be honest with you: the past couple of months I’ve started thinking you’d gone a bit arrogant. I don’t even know why specifically, truth be known. I clicked on this video due to the age of it alone and was reminded why I started watching your content in the first place. Refreshing “retro0 Wranglerstar. I’m still here and still a fan, brother. Hope you and your family have a good one!
Hi great video! I my rake handle and head just came apart. I can't seem to find a good video on how to fix a rake. Do you by chance have a video or plan to make one? Thanks.
Restored shovel is nice work, saves a little cash.... Experiencing the presence of God is priceless....l
Love these types of videos,, motivates me to get in the shop with my tools!
Thanks Cody, God bless
This is still one of my favorite videos.
Great video, as usual Mr. C. I'd like to hear your thoughts about Boiled Linseed Oil vs unboiled or Raw Linseed Oil. Thanks for your great work!
Thanks for the video. I was wondering why you removed the varnish finish?
The super slick surface of varnish will give you blisters. Always sand off on new wood handled tools. Hammers, post hole diggers etc. 👍🏻
Thanks for another great tutorial Cody.
The handle can absorb the boiled lindseed oil through the black paint on the shovel handle?
Excellent tutorial 10/10 from Perth Western Australia
It's heartening to see you're not opposed to reading spiritual works from Catholic writers. I'm going to have to listen to it myself now.
Hey what kind of paint do you ise on the shovel head anf the handle? Is it just run of the mill black paint or something special?
For when I do wood working and making tables, chairs, shelves, etc, I have discovered all that you need is a 100 and a 220 grit paper. After I put my first layer of varnish down I take my used 220 and go over and over again, I repeat it until it is my satisfaction. Then my final is a light sand with 600 grit, most of the time you don't need it though. Just a thought!
Excellent job on the shovel handle! Thanks
I have watched both videos on this topic but I do have one question, what roll pin stock are you using for the actual rivets?
Did the SEM Bumper Coater paint adhere to the Boiled Linseed Oil on the handle?
Luv the video, just one small point if you have gone to all the trouble of rubbing the handle down to rid it of varnish doesn't it defeat the object by spray painting the top?
Great video, I have always refurbished my own tools etc. Relatives always ask, why am I so cheap? I'm not, when you work hard for something take care of it. Thank you for posting this informative video. Peace!
What kind of sandblaster cabinet do you recommend?
Cody you have so much interesting knowledge!
Very good instructions. I have a boar spear head that I need to attach to a shaft/handle. It is very similar in design to a shovel. I don't have any shop equipment to forge my own rivets. Don't want a bolt/nut sticking out either. Do you have any suggestions? Thanks.
How did you do the second rivet, where there was steel only on one side?
I have a very old offset shovel similar to the one in this video, but the end of the handle is curved and goes very deep into the socket, nearly to the step. Where can I get such a handle?
Cody, I have two questions not addressed in your video. First is how to get the broken shovel handle out of the shovel head? Yours came out very easily in your video, but I spent well over an hour trying to get mine out and I broke the tip off of one of my favorite flat screw drivers trying to pry the handle open in order to get a punch out that was stuck inside in the wood of the old handle. I was using the punch to try and drive the broken handle out, but it would not budge. It was very difficult and frustrating and the whole time I kept thinking that there must be a trick to it. My second question is how to get the new handle to bend inside the shovel as it begins to curve towards the shovel head itself? My old handle actually bent and went deep into the shovel handle shaft. Sorry for my poor description as I obviously do not know the proper terminology.
Thank you, Cody.
Rick Pittser I've had good luck burning out he hold handle if it broke off too close to the shovel head to get a good grip on the old wood. Don't need to burn the whole thing to ash, just scorch it some and it'll loosen up. Maybe not ideal, pumping that much heat into the metal, but I'm not dealing with vintage or FS tools, just box store shovels.
As for the curve, if it is a gradual enough curve you may be able to hand shape the new handle to follow the curve. Otherwise you might be stuck buying a pre-curved handled and try to find one that has decent grain orientation. There's also the option of steam-curving a handle end to fit, but I'm not sure how that would affect the strength of the socket end.
Good idea, Russell. Thanks for the tip.
Enjoyed the clearly explained, well depicted video. Why not treat the handle at the shovel end? Doesn't it take the most abuse? It has two holes allowing water intrusion, is repeatedly stressed, and is exposed to various conditions and substances. Thanks.
...and he carries a handgun! I agree with your philosophy. I'm sold. Subscribed!
Needs to where he lives. Its like the old west up there
always great videos friend! God bless you and your family
Looks so good after you're all done. I love air angle grinders.
Hi Cody,
Huge fan of your work. Wonder if you might tell us about your branding tool? I've been searching for a couple weeks now to no avail. In one of your videos you made reference to a bread brand and only doing work you are willing to brand. That has stuck with me ever since.