Idk why more people don’t watch this channel. An eclectic mix of Ford motors, educational stuff and ripping on many things. Channel deserves more viewers/subs.
I'd love to see an in depth 4.6 4v budget build, I've been looking to doing some fun stuff to my 3v, and the Frankenstein stuff is buried in the forums, aluminator block, 04-05 aviator 9 thread heads, cam choices, boss rods, budget forged pistons, all the things you would need like the termi timing cover, I love the down to earth builds, and the unique stuff from this channel. I was so excited for the 5.4 swap, until we learned the engine was trashed. 😂
Love The Terminator Content Andrew And I Do Miss The Old Red Terminator You Had, Sad That It Got Parted Out And Crushed SMH, Kinda Makes Me Happy That Turdzilla Is Still Around For You Enjoy Again Like You Did Back In The Day. That Old Yellow Terminator Was Pretty Cool Too. Anyway Love The Terminator Content And Looking Forward To Seeing The Old Silver One Back Up Running Once Again.
Been watching your channel for years now(Started when Scott was still on the channel and the Terminator still had an Eaton blower) super excited to see you build back a Terminator, and am extremely happy you made it this far! Hopefully when my Cobra is up and running again, I can come to you about getting it tuned 🤞
I agree man, I’m shocked this channel isn’t bigger! You definitely deserve it brother, you grind it out and have great content. To add, you’re a great dude- I used to come to ur Wednesday night meet ups when my schedule allowed it.
It would be great to see you get a Sonic Blue coupe at some point. After getting one myself I love how the shade of blue looks lighter / darker depending on the lighting. This build now will be really cool can’t wait to see what it does on the dyno with the planed build. I knew previously that the red fire coupe was long gone for good but still sucks as these cobras are getter lower in numbers quite frequently
Not sure if you got that stud out of the block yet or not. Last year I snapped a Coyote crank puller bolt off in the end of the crank. Then engine was still in the car and I managed to get it out. It was so far down the hole in the end of the crank I had to use a borescope to see if I was making any drilling progress. In the end I got it out and I didn't have to pull the motor. Lesson learned, don't waste your time with anything other than a Tungsten drill bit and you need to make a bushing that goes around the bit to keep it centered in the hole that keeps the bit from wandering. Once I got a hole drilled it came right out with an easy out. Best of luck.
@@MustangLifestyleTV you might have heard this already but ive seen from about 13 different people warning to stay away from apex head studs. The horror stories from people talking about them is unreal. From everything ive seen which is a lot you had that issue from using those headstuds. Ive also personally seen 4 people post head gasket failures and other issues from these studs.
Love your channel. Anyway you can do a complete parts list for getting that predator blower to work? I am trying to put that blower on a gen 2 in a foxbody.
Since the motor is out I think it would be a good video to point everything out since there aren't too many videos walking you through this blower swap.
I’ve seen head studs snapping on coyotes a surprising amount recently. Like 3 witching the last 2 weeks. They’ve all been delayed breaks too. I wanted to tear my motor down and do head studs but now I don’t know that I will 😅
Been watching for a while, great content in terms of educating and still having fun. On another note, just flip it upside down and shake it and your head stud will fall out 😂
weld a 1/8'' rod to a 1/8'' drill bit, make a brass puck that goes over the drill bit and fits snug in the head stud bore, drop the two in and ... that has to be a cobalt carbide tungsten 1/8th endmill bit because its a ARP stud. power drill high speed very light contact force like combing hair "no ouch tugs". then file the broken shank into a screw extractor by grinding one end into a square point heating and hardening it then hammering it in lightly so it turns the 1/8th hole into a square by shearing corners into the center of the 1/8 hole, then that's 1/8'' in on a 1/8th square so its a 2400 pound tensile point to turn it out 300 inch pounds. 2 hours
I have only seen studs break when reusing tourqe to yield fasteners, just using cheap components or some of the counterfeit copies of quality components.
maybe try uploading shorts! cant hurt to try... really shocking how low ur subs and view count are it feels like your channel is a lot bigger. i love the content man wish i could do more
I like these more average Joe type builds. The GT350 and GT500 content is cool but so beyond anything I'll acquire any time soon. These Terminator and turbo Coyote new edge and fox cars are way more my speed and interest 🤷
Man can't stand the New Edge Mustangs, it's not like I have a black 04 GT that I daily drive everyday, so click bait back at you, Always love the content, more so the New edge stuff, they are my favorite. Man that broken head stud sucks, looks like everything looked great in the motor and a part failure like that is a hard one. Head bolt/stud are extremely hard material, are how far down in the block make it very hard as well. Wish you all the luck bud, on getting it out.
Idk why more people don’t watch this channel. An eclectic mix of Ford motors, educational stuff and ripping on many things. Channel deserves more viewers/subs.
I agree i don’t know why more people don’t watch this video!
Can't believe your channel isn't more popular! I've been here for a long while and won't be going anywhere. I can't wait on all the builds, mainly OG.
I like 3v stuff, mainly cause I'm building one as we speak, but I'll take anything mustang related. Keep up the great work brother.
I'd love to see an in depth 4.6 4v budget build, I've been looking to doing some fun stuff to my 3v, and the Frankenstein stuff is buried in the forums, aluminator block, 04-05 aviator 9 thread heads, cam choices, boss rods, budget forged pistons, all the things you would need like the termi timing cover, I love the down to earth builds, and the unique stuff from this channel. I was so excited for the 5.4 swap, until we learned the engine was trashed. 😂
I love your channel Andrew I can't believe more people aren't watching it!
Appreciate that!
Glad i came back definitely watching the old videos! Bummer about the silver cobra! Hopefully fingers crossed it’s an easy fix!
Love The Terminator Content Andrew And I Do Miss The Old Red Terminator You Had, Sad That It Got Parted Out And Crushed SMH, Kinda Makes Me Happy That Turdzilla Is Still Around For You Enjoy Again Like You Did Back In The Day. That Old Yellow Terminator Was Pretty Cool Too. Anyway Love The Terminator Content And Looking Forward To Seeing The Old Silver One Back Up Running Once Again.
Been watching your channel for years now(Started when Scott was still on the channel and the Terminator still had an Eaton blower) super excited to see you build back a Terminator, and am extremely happy you made it this far! Hopefully when my Cobra is up and running again, I can come to you about getting it tuned 🤞
Great content as always! What a pita job getting that broken stud out. I'm looking forward to the Terminator rebirth!
I agree man, I’m shocked this channel isn’t bigger! You definitely deserve it brother, you grind it out and have great content. To add, you’re a great dude- I used to come to ur Wednesday night meet ups when my schedule allowed it.
It would be great to see you get a Sonic Blue coupe at some point. After getting one myself I love how the shade of blue looks lighter / darker depending on the lighting. This build now will be really cool can’t wait to see what it does on the dyno with the planed build.
I knew previously that the red fire coupe was long gone for good but still sucks as these cobras are getter lower in numbers quite frequently
Wow this will be cool video series,I have a 03 cobra and Eaton for life 💪🏻
Great content as always! What a pita job getting that broken stud out. I'm looking forward to the Terminator rebirth. New Edges Rock!
Not sure if you got that stud out of the block yet or not. Last year I snapped a Coyote crank puller bolt off in the end of the crank. Then engine was still in the car and I managed to get it out. It was so far down the hole in the end of the crank I had to use a borescope to see if I was making any drilling progress. In the end I got it out and I didn't have to pull the motor. Lesson learned, don't waste your time with anything other than a Tungsten drill bit and you need to make a bushing that goes around the bit to keep it centered in the hole that keeps the bit from wandering. Once I got a hole drilled it came right out with an easy out. Best of luck.
I loved the predator setup but I know you’re excited to have a screaming Eaton Terminator again. I’m excited to see it back on the road again
Still planning for the predator setup to go on OG
@@MustangLifestyleTVoh I know. OG’s return is gonna be insane
@@MustangLifestyleTV were these the apex head studs?
@@Hardwaretuned yes
@@MustangLifestyleTV you might have heard this already but ive seen from about 13 different people warning to stay away from apex head studs. The horror stories from people talking about them is unreal. From everything ive seen which is a lot you had that issue from using those headstuds. Ive also personally seen 4 people post head gasket failures and other issues from these studs.
You did an excellent job with tuning my 02 gt kenne bell ms3
Love your channel. Anyway you can do a complete parts list for getting that predator blower to work? I am trying to put that blower on a gen 2 in a foxbody.
Since the motor is out I think it would be a good video to point everything out since there aren't too many videos walking you through this blower swap.
I’ve seen head studs snapping on coyotes a surprising amount recently. Like 3 witching the last 2 weeks. They’ve all been delayed breaks too. I wanted to tear my motor down and do head studs but now I don’t know that I will 😅
Best of success for you and the Terminator 💪
🐍
Very much excited to see all the gear bangin to come, Its hard finding some good drivermod nowadays on yt lol
Been watching for a while, great content in terms of educating and still having fun. On another note, just flip it upside down and shake it and your head stud will fall out 😂
Wish I lived in Florida man. I would let you tune my 3v in a heartbeat
I tune remote
weld a 1/8'' rod to a 1/8'' drill bit, make a brass puck that goes over the drill bit and fits snug in the head stud bore, drop the two in and ... that has to be a cobalt carbide tungsten 1/8th endmill bit because its a ARP stud. power drill high speed very light contact force like combing hair "no ouch tugs". then file the broken shank into a screw extractor by grinding one end into a square point heating and hardening it then hammering it in lightly so it turns the 1/8th hole into a square by shearing corners into the center of the 1/8 hole, then that's 1/8'' in on a 1/8th square so its a 2400 pound tensile point to turn it out 300 inch pounds. 2 hours
Ever figure out what exactly happened to your redfire car? Like how they wrecked it? Sucks what happened that was such a nice car
Yeah I made a video on it. One of the new owners took it out in the rain and lost control
If you tell which video it is I'll watch it. That'll improve your view count.@@MustangLifestyleTV
@@bowlinglefty New Owner of my Cobra Totaled it within 24 Hours of Ownership...
ua-cam.com/video/3Pq1dB3qr7E/v-deo.html
So andrew which one of these good ol new edges are going to get voodoo swapped? Set it up like a fathouse fab twin turbo kit
Drill the center with long Cobolt bit then easy out or left hand drill to remove it pice of cake I did the same thing on my motor I broke 2 studs
This is precisely why it is recommended to NOT run studs to the bottom of blind holes.
I love Terminators. ❤
Good stuff! Keep it coming
Also can you post more 3v stuff if possible
Turdzilla has some tricks in the works
What’s the company name to call you have a question about you tuning my car remote
Reach out to me on Facebook or my number is listed on my Mustang Lifestyle website
I have only seen studs break when reusing tourqe to yield fasteners, just using cheap components or some of the counterfeit copies of quality components.
Was about to say that, if I had to put money in it he reused the studs which is a big no no, but sometimes you can’t fix stupid Lol
arp or apex head studs?
Hey man. Sorry for the bad luck. Hope it smooths out.
We got a plan
Thanks for the info
Nothing some helicoil can’t fix 😂
Will the blower kit on the GT work for my Gen3 10r80 coyote swap foxbody? Im interested. Thanks
Predator blower won't work without a spacer because of the di if you had a cowl or something to clear you can do it.
Works with a space to clear di and hood clearance will become an issue. Otherwise no problems
@@MustangLifestyleTV What about the procharger kit you said you might sell is what I'm talking about. Thanks
@@AADmrstangerbanger procharger kit will fit. It’s for sale as well
@@MustangLifestyleTV how much also need a tune for my car if I get it. Thanks
Good luck getting the stud out what a headache
I purchased shirts back in January I’m still waiting on them to ship
damn thats wild!
Send me a text or email we can see what happened
@@MustangLifestyleTV I sent message on your Facebook messenger my guy.
Andrew is the man. Problem solved!
maybe try uploading shorts! cant hurt to try... really shocking how low ur subs and view count are it feels like your channel is a lot bigger. i love the content man wish i could do more
No offense but that guy has bad track record of OPG failures, now head studs....Glad he helped out a little for what its worth.
truth
ARP studs only
Never quit there always a solution and a resolution you doing it.👏🇨🇦😎👍
I like these more average Joe type builds. The GT350 and GT500 content is cool but so beyond anything I'll acquire any time soon. These Terminator and turbo Coyote new edge and fox cars are way more my speed and interest 🤷
Man can't stand the New Edge Mustangs, it's not like I have a black 04 GT that I daily drive everyday, so click
bait back at you, Always love the content, more so the New edge stuff, they are my favorite. Man that broken
head stud sucks, looks like everything looked great in the motor and a part failure like that is a hard one.
Head bolt/stud are extremely hard material, are how far down in the block make it very hard as well. Wish
you all the luck bud, on getting it out.
Whoop whoop
Man there’s no worse way to have a bolt break
Bummer…
🇺🇸
Since you’re being transparent, where’s Ashley?
Ashley and I are married and very happy with our daughter. She just doesn’t end up in videos often.
@@MustangLifestyleTV
Dude I’m so glad to hear it and I’m so happy for you both. Keep up the great work and let’s see some pictures of your family!!!
❤
People really interested in the Dinosaur stuff ?
Yea he is and alot of us feel the same. We happen to like our "dinosaur stuff"
I am!!! I own dinosaur stuff!!!
Better than boring plastic motors...
I have a dinosaur motor also. 69 fast back. I was just messing with him.