I’ve watched a lot of these types of repairs and you can understandably still see something under the lights when finished. This though is insane. Awesome result. Good work.
You can still see the whole line he filled in when he gets up and moves the angle @ 14:02. Also a tiny spot the paint didn't fill made it to the end. But honestly that's about as good as you can get these spot fills. The goal is to make it so that your eye doesn't get drawn to it and you don't notice it unless you already knew it was there
@@Amddetailing I’ve been interior detailing for about a year, and that’s no problem for me, exterior isn’t too bad either, but paint correction is a whole other story, I knew the way I’ve been shown wasn’t the best, people saying “there’s nothing you can do without repainting the whole panel”.. I admire this and will look into bettering my work.
That is the best scratch removal demo I’ve ever seen. I have one of those pens for filling stone chips and always felt it could be taken further for even better results. Great work!
I’m learning from this guy since I buy and resell cars. I tried on a black Honda accord and not perfect but I did a great job for my first time. I will continue to practice on more vehicles until I get to his level, thank you.
@@Amddetailing Hey, considering metallic paints are harder to fill in due to the metallic itself, wouldn't be be also viable to spray with air brush and then fill with clear?
It's always such a treat to watch a pro work. You know what tools and materials you will need, it's not your first rodeo that is obvious. I want to thank you for sharing just a bit of your talents, sir. This is quite helpful.
I stumbled upon one of your videos over 4 months ago and was impressed by the techniques. Yesterday, after spending so many hours searching for your video in the history and almost giving up, there it was just a few seconds ago in the suggestions while looking for scratch removal. Unfortunately, the new year fireworks chipped my new car paint 😢, and I need to try to repair it. If I were anywhere close to you, I would have brought it for you to repair, but I am in Prague. I have ordered the Mirka tool, airbrush, and all the sanding papers. Wish me luck 🤞🍀 and thanks for the great content and your videos! Very relaxing, lol. 🚗✨🛠️
the channel was unavailable for 12 hours because it was hacked, but we managed to get it back like all the videos on it, I hope you will succeed in your work, I wish you good luck
Lots of great stuff in this video, especially when you mixed the clear coat and base paint and applied it to the scratch with your pen. What a result. Thanks
You see how detailed he is even when filming. Not to many detailed people out there. Im 40 and without any experience just my attention to detail and not to brag either but when i was 16 someone keyed my car. And i taught myself this method by using touchup paint. Tho i wish i would have had this video to reference to i managed to use compound to get rid of all the extra touchup which made it level enough for me being 16 and then, I polished and waxed and barely seen the scratch that was deep in my primer. All said and done i am as good as this man!
Undoubtedly this is the best job done very well on your channel. Appreciate if you do the same procedure on Japanese vehicle which has much thinner paint and soft clear coats than BMW, Merc etc etc as their paint quality gives lot of room to play with. This will help lot of your audience to learn and how to tackle a similar job on Japanese paints. Thanks
mate, every time i see your work im blown away . i am going to have to master this method for touch ups mate. its good to see you back with a video again and i wait with excitement for the video on the new compound. thanks again for a great video much appreciated and keep up the great work my friend.
WOW! You are amazing Sir. To make those type of deep scratches disappear like that you must be a magician! And you make it look so easy as well. Absolutely amazing.👏
Beautiful results once again and step-by-step instruction really help me fix most rock chips and small nicks on my black paint thank you so much for sharing your method appreciated
This channel is a goldmine just saying. The skills being showed in the vids are incredible. Thank you very much for sharing all the info. You go straight to the point and exactly show what the title says . Keep up the good work and please keep the vids coming. Subscribed!
When I follow those exact instructions for a scratch, I end up with a sanded area around the scratch but the scratch still visible. If I sand further, it removes the touch-up paint I added.
Finally a new video, I am so impressed with your knowledge and the jobs you do. Keep sharing your projects. Greetings from Sweden! Konačno novi video, tako sam impresioniran vašim znanjem i poslovima koje radite. Nastavite dijeliti svoje projekte. Pozdrav iz Svedske!
I like to tackle all my repairs myself , especially mechanical stuff , I’ve had a few goes at paint chips scratches and similar & do a bloody good job or so I thought …. After watching this I need to go back to school 😮
Wow, this is unbelievable, excellent and finished with a rotary tool, great job, thanks for sharing!!! Would be nice to put links of the products you used on the video.
Absolutely the best video, its not completecated excellent work thanks for sharing your knowledge and skills with us you are an absolute legend. Thankyou Sir.
My sons very similar coloured VW polo has a scratch like that on one of its doors. The video makes it look so easy but not sure I'm brave enough to start into it like this.
درود بر شما ❤ هرکسی کار زیبای خودش را به این واضحی به نمایش نمیگذاره ، پس کار شما خیلی ارزشمنده. فقط بعضی از خراش ها با یکبار رنگ زدن ، پر نمیشه و باید دو الی سه بار رنگ داخل خراش زده بشه تا پر بشه ، بعد از آن سنباده و پولیش انجام بشه نتیجه مطلوبی خواهد داشت. مرحبا به شما استاد گرامی👏🏼👏🏼❤
@ 13:47 where we see the two light bar reflections on the door, where the left lower reflection is, the scratch becomes visible when moving from top to bottom. It is not as visible as before but the scratch remains. Same with the smaller scratch underneeth the door handle. But I must add that (without seeing it with the naked eye) it looks very close to perfect and makes selling a whole lot easier. Good job!
if i have small deep scratch like the scratch you had to fill in but much shorter, can i do the polishing by hand because such a small area? or do i need a rotary also? such a great video thanks so much!
I appreciate the video, just having an impossible time finding "UV Clear Coat" anywhere.. you have any brand or a shop that carries something you would recommend? I have everything except for that. EDIT: Also having a hard time finding a comparable cutting compound. I have options for 400, 1000, 2500, 3800.. there's quite a lot of options out there.
This is amazing. I thought I would have to paint the whole door cause I have a long scratch like that. However I am not good enough to do it myself how can I find someone qualified to do this for me?
Masterwork 💯, can I do it on my white VW Polo as I have the same kind of scratch on the right front driver side door. How can I proceed ? Do I have to get paint (the base coat and clear coat mixed from the Sikkens mixing plant at the VW authorised body shop) ? Where can I find such paint pen. I live in India.
This diy was nice and very well explained. Just so I understand it correctly, you don't need other then dry 1500 and wet 1500 for the scratches, because on some other videos I've been told to use up to P5000?
Hi There 🖐 Another great and very interesting and informative video. I really enjoy watching your work. I do miss the opening: “hello boys and girls” Cheers!!..😎
Another great video!! For those small spots I’m thinking to get a mirka deros 350 to use with the kovax discs. What do you think? Also the Festool carbide blade to remove the excess. I got the EWOCAR heavy compound, love it, but the delivery is complicated to USA, is there another compound alike that I can get here? Thank you
That's was an Amazing scratch repair I'm gona give it a go on my van few deep scratches . Thanks .. what grade was the first round sand paper disc you used.. ?
Amazing work, great start and finish. Can you give me list of what need for the deep key scratch have same scratch on my car want to give it a try with your tactics
Fantastic work. What I'm curious about is repairing stone damage. Are you thinking about making a recording about this. Or is it the same way to fill stone damage with paint pen and then wet sand. Thank you very much for your answer
Hello. Excellent job and excellent channel that's why I subscribed !!! But I have a couple of questions: 1. In this video you used UV clear coat mixing the base color and in another similar repair you used hardener. What's the best option ? And what are the proper way for 2K and 1K Colours? Hardener in dilluted color or UV clear coat in base color? 2. Here you began sanding with 1500 grit and in another repair you began with 800 grit. It depends on the scratch or something else? Thanks a lot and I;m waiting for your answer
Have seen hundreds of videos of people repairing chips on paint work. You leave everyone for dead, by far the best results I have seen.👍
Tnx my friend and enjoy
I’ve watched a lot of these types of repairs and you can understandably still see something under the lights when finished. This though is insane. Awesome result. Good work.
Tnx my friend
You can still see the whole line he filled in when he gets up and moves the angle @ 14:02. Also a tiny spot the paint didn't fill made it to the end. But honestly that's about as good as you can get these spot fills. The goal is to make it so that your eye doesn't get drawn to it and you don't notice it unless you already knew it was there
@@Amddetailing I’ve been interior detailing for about a year, and that’s no problem for me, exterior isn’t too bad either, but paint correction is a whole other story, I knew the way I’ve been shown wasn’t the best, people saying “there’s nothing you can do without repainting the whole panel”.. I admire this and will look into bettering my work.
That is the best scratch removal demo I’ve ever seen. I have one of those pens for filling stone chips and always felt it could be taken further for even better results. Great work!
I’ve not ever seen a paint pen like that, having the proper kit makes all the difference, excellent work
Very likely one of the best scratch repair videos i have ever seen!
I’m learning from this guy since I buy and resell cars. I tried on a black Honda accord and not perfect but I did a great job for my first time. I will continue to practice on more vehicles until I get to his level, thank you.
Nice
I didn’t realize you can add clear coat to paint! Well done!!!🔥🔥🔥
me either, makes you wonder why isnt it added any ways? Maybe it clogs the sprayer or something.
Best scratch removal I have ever seen, I wish this guy was in my country.
Tnx bro
You are a master craftsman. Immaculate work. Very satisfying to watch. I must get a paint pen 😀👍
Tnx my friend
@@Amddetailing Hey, considering metallic paints are harder to fill in due to the metallic itself, wouldn't be be also viable to spray with air brush and then fill with clear?
It's always such a treat to watch a pro work. You know what tools and materials you will need, it's not your first rodeo that is obvious. I want to thank you for sharing just a bit of your talents, sir. This is quite helpful.
Tnx bro
I stumbled upon one of your videos over 4 months ago and was impressed by the techniques. Yesterday, after spending so many hours searching for your video in the history and almost giving up, there it was just a few seconds ago in the suggestions while looking for scratch removal. Unfortunately, the new year fireworks chipped my new car paint 😢, and I need to try to repair it. If I were anywhere close to you, I would have brought it for you to repair, but I am in Prague. I have ordered the Mirka tool, airbrush, and all the sanding papers. Wish me luck 🤞🍀 and thanks for the great content and your videos! Very relaxing, lol. 🚗✨🛠️
the channel was unavailable for 12 hours because it was hacked, but we managed to get it back like all the videos on it, I hope you will succeed in your work, I wish you good luck
Absolute master at work. The combination of skills shows so many years of experience. Great job.
Tnx bro and enjoy
Amazing results, especially with all the bright lights to show any flaws. Really well done - best I've ever seen without a respray of a panel!
Lots of great stuff in this video, especially when you mixed the clear coat and base paint and applied it to the scratch with your pen. What a result. Thanks
You see how detailed he is even when filming. Not to many detailed people out there. Im 40 and without any experience just my attention to detail and not to brag either but when i was 16 someone keyed my car. And i taught myself this method by using touchup paint. Tho i wish i would have had this video to reference to i managed to use compound to get rid of all the extra touchup which made it level enough for me being 16 and then, I polished and waxed and barely seen the scratch that was deep in my primer. All said and done i am as good as this man!
Thank you, with a little effort and knowledge, sw can be done and reduced by about 90%, while remaining a factory paint
This is the best repair of scratch on UA-cam. You are amazing 😉
Tnx bro and enjoy
Iv done a fair bit of scratch fill , but iv just learnd a lot from you , this go's in my fav bar . Awesome work, Many thanks.
Tnx bro
Undoubtedly this is the best job done very well on your channel. Appreciate if you do the same procedure on Japanese vehicle which has much thinner paint and soft clear coats than BMW, Merc etc etc as their paint quality gives lot of room to play with. This will help lot of your audience to learn and how to tackle a similar job on Japanese paints. Thanks
Agreed. European cars have a lot to work with. Interested to see thinner paint fixes.
Amazing. This is not a scratch removal procedure, this is an ART. Congratulations👏👏👏👏👏👏
Tnx friend
Thanks AMD, your videos are excellent. I've learned from you and saved thousands in body paint repair and detailing.
I'm glad to hear that
Phenomenal work as usual, one of the best detailers I've seen on the Tube... true talent and inspiration...
tnx my friend
Good job! It's nice that the video showed the tools, the materials and the whole process in detail. I'm just an amateur, but I enjoyed. Odlican 5.
mate, every time i see your work im blown away . i am going to have to master this method for touch ups mate. its good to see you back with a video again and i wait with excitement for the video on the new compound. thanks again for a great video much appreciated and keep up the great work my friend.
Tnx my friend at the end of the week there is a new video
@@Amddetailing just a quick question for you mate. will this touch up method work on all colours?
While dry sanding at the beginning what was the grade of the paper ? Amazing job by the way
So far this is the best job I have ever seen
Tnx
An excellent job, professionalism, well done.😊👏👏
Technology keeps making it easier
That stuff on the bottle is awesome
WOW! You are amazing Sir. To make those type of deep scratches disappear like that you must be a magician! And you make it look so easy as well. Absolutely amazing.👏
Beautiful results once again and step-by-step instruction really help me fix most rock chips and small nicks on my black paint thank you so much for sharing your method appreciated
Real PRO ❤❤
Its like the first video you actualy cant say where the damage was, briliant work, amazing skill
This channel is a goldmine just saying. The skills being showed in the vids are incredible. Thank you very much for sharing all the info. You go straight to the point and exactly show what the title says . Keep up the good work and please keep the vids coming. Subscribed!
Tnx bro and enjoy
When I follow those exact instructions for a scratch, I end up with a sanded area around the scratch but the scratch still visible. If I sand further, it removes the touch-up paint I added.
this is brilliant... I have some scratch mark on my car. definitely doing this my own.
To fill the scrach with ink, i like to use a "liner brush", like Virus N'1. Good control and easy to use.
great work...did you mix the colour and clearcoat before painting?...not first colour and after clearcoat?
Awesome video, gives good understanding how a deep scratch is repaired. Thanks for sharing your skills.
Great work. I would have loved to see the car owner's reaction.
That’s is amazing work, thanks you for recording your work and sharing the details.
Tnx and enjoy
Someone keyed my entire Explorer while out with my family and there is no way I am having it repainted. This just gave me hope 😅
try
VERY insightful video! Thank you for sharing
Tnx and enjoy
Finally a new video, I am so impressed with your knowledge and the jobs you do. Keep sharing your projects. Greetings from Sweden!
Konačno novi video, tako sam impresioniran vašim znanjem i poslovima koje radite. Nastavite dijeliti svoje projekte. Pozdrav iz Svedske!
Tnx my friend and enjoy
This is a complete video about different kinds of scratches, very good work, thank you
I like to tackle all my repairs myself , especially mechanical stuff , I’ve had a few goes at paint chips scratches and similar & do a bloody good job or so I thought …. After watching this I need to go back to school 😮
The most important thing is patience and not staring
Wow, this is unbelievable, excellent and finished with a rotary tool, great job, thanks for sharing!!!
Would be nice to put links of the products you used on the video.
Absolutely the best video, its not completecated excellent work thanks for sharing your knowledge and skills with us you are an absolute legend. Thankyou Sir.
Tnx and enjoy in the channel
Thanks for the video! Very very good information.
I have no idea how you can work in that area with such intense squeaking when you walk hahaha
You are creative and your work is true magic
Tnx bro
A master at his job. Amazing. 👌
Very nice done ! Thank you for the teaching, I am gonna try that tomorrow in my car side
My sons very similar coloured VW polo has a scratch like that on one of its doors. The video makes it look so easy but not sure I'm brave enough to start into it like this.
درود بر شما ❤
هرکسی کار زیبای خودش را به این واضحی به نمایش نمیگذاره ، پس کار شما خیلی ارزشمنده.
فقط بعضی از خراش ها با یکبار رنگ زدن ، پر نمیشه و باید دو الی سه بار رنگ داخل خراش زده بشه تا پر بشه ، بعد از آن سنباده و پولیش انجام بشه نتیجه مطلوبی خواهد داشت. مرحبا به شما استاد گرامی👏🏼👏🏼❤
Fantastic workmanship
Tnx bro
@ 13:47 where we see the two light bar reflections on the door, where the left lower reflection is, the scratch becomes visible when moving from top to bottom. It is not as visible as before but the scratch remains. Same with the smaller scratch underneeth the door handle.
But I must add that (without seeing it with the naked eye) it looks very close to perfect and makes selling a whole lot easier.
Good job!
the damage will always be visible under led lights, but outside in the sun it is not noticeable, about 90% of the scratch is covered
You are so skillful, fabulous work
tnx
Absolutely masterpiece. Beyond impeccable!
Great job. I have a similar Deep scratch on my car although the garage says the whole door needs spraying for £250
best video i've ever seen, awesome work
tnx my friend
if i have small deep scratch like the scratch you had to fill in but much shorter, can i do the polishing by hand because such a small area? or do i need a rotary also?
such a great video thanks so much!
OMG
Them squeaky trainers 😂
You are truly talented. Love these videos.
Tnx my friend
I haven't seen such a informative video before.
Le travail accompli est tout simplement magnifique 💪💪💪💪
I appreciate the video, just having an impossible time finding "UV Clear Coat" anywhere.. you have any brand or a shop that carries something you would recommend? I have everything except for that. EDIT: Also having a hard time finding a comparable cutting compound. I have options for 400, 1000, 2500, 3800.. there's quite a lot of options out there.
De mir reci gdje budes? Imam dvije ogrebotine na vratima jednu duga 35-40 cm i na blatobranu duga oko 25 cm, ma ti si majstora za sviju! Svaka ti cast
Pisi na instagram @ tataragic
@@Amddetailing imas PN
This is amazing. I thought I would have to paint the whole door cause I have a long scratch like that. However I am not good enough to do it myself how can I find someone qualified to do this for me?
Find some good detailers near you and ask them.
But new paintjob is good solution if dont need the cheapest way.
Yet again fantastic work. So enjoy watching the channel. One question:- Why did you wet sand this instead of Dry sand? Keep up the good work 👏
for the finish, water sanding and bringing the filled part to "zero" turned out to be a little better.
Masterwork 💯, can I do it on my white VW Polo as I have the same kind of scratch on the right front driver side door. How can I proceed ?
Do I have to get paint (the base coat and clear coat mixed from the Sikkens mixing plant at the VW authorised body shop) ?
Where can I find such paint pen. I live in India.
Awesome video, got some deep scratch to work on and this was the perfect video to replicate. , how long did the whole project take you?
One day
Excellent work sir, where or when you used a clear coat? Thanks 😊
Wonderful. Would it work on silver metallic as well?
No
Nice job. Ever sand or buff through the clear, How do you fix that without a paint shop?
many times you have a lot of videos on my channel about it
Hello, did you use the clear coat for the deep scratch? Or only filled with color paint?
totally amazing work done simple, or he made it look simple anyway, awesome job!
Another perfect work, very well done.
Tnx bro
Looks great. I'd love to see it in person or in direct sunlight on video, just to be as realistic as possible.
Believe that it is more noticeable under led lights than when the car is outside in the sun, that's why it was filmed under led lights
This diy was nice and very well explained. Just so I understand it correctly, you don't need other then dry 1500 and wet 1500 for the scratches, because on some other videos I've been told to use up to P5000?
p5000 is insane :P 1500 is enough, because the polish machine can remove those scratches easy :)
Beautiful work, but I’m curious about the clear coat thickness after the sanding and polishing. Ever measured before and after?
Before
So the paint has a mixture of paint an clearcoat ? When I do touch-ups, I put paint then clearcoat on top. Is yours mixed in?
Yes
Amazing work! Will this method work on a pearl finish, like Toyota Pearl Red?
that color is difficult to do, but it can be done
Hi There 🖐
Another great and very interesting and informative video. I really enjoy watching your work.
I do miss the opening: “hello boys and girls”
Cheers!!..😎
Tnx my friend
Why don't you use Mirka's Shark Blade to further remove excess paint? Thank you for sharing your knowledge.
What paint is that, just base and fast hardener separate?
Do you need to put some clear coat in the pain or is not need.
GREAT WORK!!! 👍
There is no need for a coating because even the hardener has a shine when it dries, it will not be matte
Thanks a lot!
What a nice job👍👌👏👏.
Another subscriber here.
Tnx my friend
Beautiful job!👏👏👏
what kind of paint do you use? solvent paint? what is de mix?
thank you👍👍👍
Чиройли чикибть маладес
Amazing work! 👍
Tnx
Amazing i can't believe how great it looks
Will the dull sanded patch come back after the polish wears off?
Another great video!! For those small spots I’m thinking to get a mirka deros 350 to use with the kovax discs. What do you think? Also the Festool carbide blade to remove the excess.
I got the EWOCAR heavy compound, love it, but the delivery is complicated to USA, is there another compound alike that I can get here?
Thank you
Also I have no found the UV clear. Any suggestions?
you can also use 350, it is for fine works, I prefer this one because it is more durable
Awesome work my friend 🤩🤩
Tnx bro
Thanks for not putting any annoying sounds or music 😅
That's was an Amazing scratch repair I'm gona give it a go on my van few deep scratches . Thanks .. what grade was the first round sand paper disc you used.. ?
Tnx 1500 paper
Amazing work, great start and finish. Can you give me list of what need for the deep key scratch have same scratch on my car want to give it a try with your tactics
what did you used to dilute the paint?
That is a crazy good result ...
tnx
Fantastic work. What I'm curious about is repairing stone damage. Are you thinking about making a recording about this. Or is it the same way to fill stone damage with paint pen and then wet sand. Thank you very much for your answer
ua-cam.com/video/oWgxSgDEvzo/v-deo.html
🗣 Great job. Matter of fact, superb job!
Great work! Just out of my curiosity, what thickness will bring the paint down to?😮
on orginal 180 micron
Hello. Excellent job and excellent channel that's why I subscribed !!! But I have a couple of questions:
1. In this video you used UV clear coat mixing the base color and in another similar repair you used hardener. What's the best option ? And what are the proper way for 2K and 1K Colours? Hardener in dilluted color or UV clear coat in base color?
2. Here you began sanding with 1500 grit and in another repair you began with 800 grit. It depends on the scratch or something else?
Thanks a lot and I;m waiting for your answer
uv coating is only better if it dries quickly (5 to 10 min)
sanding depends on the thickness you applied when filling (mostly goes with 1500)
Amazing video and really helpfull with a lot off details..... thnx a million times ...... my friend
Tnx bro