You can see the scratch becasue applied paint is softer then what is on panel. So when you sand it down smooth, you will remove "new" paint quicker during polishing becasue it is softer. In good light and viewing angle you can see how light reflects in the groove. Anyway - its a good job, and much better than having scratched car and cheaper than paining whole panels.
Lo ripeto ancora, sei molto ma molto bravo, immagino quanti anni di esperienza hai per questi risultati eccellenti. Ti abbraccio fratello, Saluti dall'Italia
Brilliant work. Very well explained. Saved the customer a fortune. We have learned loads from you. We even purchased a uv scangrip lamp and uv lacquer after 1 of your videos. Well done, keep the videos coming
I have a same problem with more difficult paint condition (17yrs old paint), when i polish it some of clear coat going bad, i think cant do same repairing job like the video
@@RakicFarbanjeKlavijatura da uzeo sam nesto od alata i zavrsavam tu obuku pa cu gledati i to predstavljati na kanalu da olaksam ljudima kojibse mislie ovim baviti
super work but can you please explain us why this time you dont use the Micra yellow scrap tool ? you use directly and only sand paper. thank you for your answer :)
@@Amddetailing can you please explain for what reason is better ? I dont notice an explanation in the video why scraping with micra is less good in comparaison of wet sanding :)
When the lines are shallow and thin, the Mirka scraper knows how to take out the color you filled and you have to repeat everything, Mirka is a good thing and I use it, but when the lines are wide and there is more material to sand
@@Amddetailing when the ligne are more deeper with more material to put the risk to use a Micra scraper can remove the paint ? This why you use sand paper ? Thank you ;)
Great result. I have an touareg also with same damage on fender and i want to do it by myself. Because your videos i start to polish/repair my cars and buy a lot of staff for it 😅 I have some problems in purchase the paint. What should i buy? 1k or 2k paint?i need to use thinner? Thank you!
Hello. Very nice vid. I use 1 part base 1 part clear 1 part quick hardener Most of the times i cant fill the scratch fully on 1st go. When it dries, i can see how the color settled down. I'm applying maximum amount. If i add more, it would spill. The paint is thin after some time on the open. Shall i wait longer for thicker substance? Thank you :)
It is always filled thicker, from the first time, it is never directly touched to the damage, when the paint is applied to the damage, you have to remove a few millimeters and let the paint fill it by itself. I always leave it to dry for at least 4 to 6 hours
Nice upload as always! One question, why didn't you used the UV Clear Coat this time? I've noticed the repairs with the UV Clear are usually better than with standard clear and hardner combo. Cheers
I could do with that too, but since it's currently autumn and there's less sun, it's immediately more difficult to dry with a UV coating, and it takes a long time to dry with a lamp because the damage is quantitatively large
it's not a problem, the problem is that people don't want to paint the entire element and spoil the factory coating, because later they have a problem when the car is sold, because more and more customers think that the car was in a big accident as soon as it was painted. Put yourself in a situation when you are buying a car and you see that something has been painted, you immediately have doubts and avoid such a car.
Kudos for trying, but this really needs 320g, sealer, blender, 2BC, 1 orientation, 3 CC to look right. The scratches are extremely obvious and jump out. Cheers
yes, it can be seen from 5 centimeters from the car and it looks like a scratch made of wood and because that side is polished and there are no scratches on the coating caused by washing and the color is refreshed, but after a few washes it will all blend together and not be noticeable
Great to see an upload from you again
Tnx
Tim klošarima što grebu aute ključevima treba lomit ruke javno nasred trga.. svaka čast na poslu 👌
Dzaba toga uvijek ima
You can see the scratch becasue applied paint is softer then what is on panel. So when you sand it down smooth, you will remove "new" paint quicker during polishing becasue it is softer. In good light and viewing angle you can see how light reflects in the groove. Anyway - its a good job, and much better than having scratched car and cheaper than paining whole panels.
Use a tungsten block to cut bach the paint initially. Theyre specifically designed to knock back paint runs without taking off so much clear around it
Keep uploading these amazing vids please. I've learned so much already. Your skills are from another level as it seems
Tnx my friend
Lo ripeto ancora, sei molto ma molto bravo, immagino quanti anni di esperienza hai per questi risultati eccellenti. Ti abbraccio fratello, Saluti dall'Italia
Brilliant work.
Very well explained.
Saved the customer a fortune.
We have learned loads from you.
We even purchased a uv scangrip lamp and uv lacquer after 1 of your videos.
Well done, keep the videos coming
I am glad that you are another one of my followers who have been helped by my videos
keep it up
Great work from a professional!!
Tnx
You are the best!👏😲💪
Great job master Alan ..you are 👑
Tnx my friend
I have a same problem with more difficult paint condition (17yrs old paint), when i polish it some of clear coat going bad, i think cant do same repairing job like the video
Another great job!
Tnx
Great video.. what's the ratio on the mixing of hardener and paint and clear all together ?
Your video is great , very informative , Thanks!!!
Link to the needle paint tool plz.
Tnx bro
Nema boljeg majstora za poliranje! Svaka cast! Nema te nesto u grupi Lakiranja na fb? 😀
Heheh hvala ti ,a nemam vremena iskreno zavrsavam obuku za PDR pa sam slabo aktivan
@@Amddetailing primetio sam alat na zidu.. super, jedva cekamo snimke i za to 😀
@@RakicFarbanjeKlavijatura da uzeo sam nesto od alata i zavrsavam tu obuku pa cu gledati i to predstavljati na kanalu da olaksam ljudima kojibse mislie ovim baviti
Where do you buy acrylic lacquer basecoat?
super work but can you please explain us why this time you dont use the Micra yellow scrap tool ? you use directly and only sand paper. thank you for your answer :)
Yeah, I like to know the same
it is explained in the video that it turned out to be much better to remove the filled case with water paper when it is done
@@Amddetailing can you please explain for what reason is better ? I dont notice an explanation in the video why scraping with micra is less good in comparaison of wet sanding :)
When the lines are shallow and thin, the Mirka scraper knows how to take out the color you filled and you have to repeat everything, Mirka is a good thing and I use it, but when the lines are wide and there is more material to sand
@@Amddetailing when the ligne are more deeper with more material to put the risk to use a Micra scraper can remove the paint ? This why you use sand paper ? Thank you ;)
Subscribed to learn more
Tnx my friend and enjoy
Wowww awesome I wish you were close by me
Tnx my friend
Great result. I have an touareg also with same damage on fender and i want to do it by myself.
Because your videos i start to polish/repair my cars and buy a lot of staff for it 😅
I have some problems in purchase the paint.
What should i buy? 1k or 2k paint?i need to use thinner?
Thank you!
the base is used 2k, it is diluted with an acrylic thinner, if you use an acrylic base, then the absorbent goes into it and that's it
Thank you!
This is the notorious deep key scratch caused by cheating lovers or hateful neighbors. Sometimes this damage is done to the wrong car.
Hehehhee
Great job can I do this with spray paint from a can?
you can't spray
Odličan posao odrađen. Radiš li lakiranje komplet branika ili samo parcijalne ispravke ovakve vrste?
Pozz
Hvala ti,ne bavim se lakiranjem
very good job you mix the base with the varnish directly?
I'm curious to know too
Yes
Doktor 👊💪☝️🥇🏆
😘😘😘
Hello. Very nice vid.
I use 1 part base
1 part clear
1 part quick hardener
Most of the times i cant fill the scratch fully on 1st go. When it dries, i can see how the color settled down. I'm applying maximum amount. If i add more, it would spill.
The paint is thin after some time on the open. Shall i wait longer for thicker substance?
Thank you :)
It is always filled thicker, from the first time, it is never directly touched to the damage, when the paint is applied to the damage, you have to remove a few millimeters and let the paint fill it by itself.
I always leave it to dry for at least 4 to 6 hours
Nice upload as always! One question, why didn't you used the UV Clear Coat this time? I've noticed the repairs with the UV Clear are usually better than with standard clear and hardner combo. Cheers
I've tried locating UV cured clear in the USA to no avail. I've asked major suppliers personally, nope.
I could do with that too, but since it's currently autumn and there's less sun, it's immediately more difficult to dry with a UV coating, and it takes a long time to dry with a lamp because the damage is quantitatively large
Clean job 🖖🖖🖖🖖🖖
tnx bro ad enjoy
What is the professor dye mixing ratio
Looking for Pdr on door edge
This is Korea. I want to learn the skills of the teacher. What should I do? Please teach me.
You have a lot of videos on my channel and in each one it is explained how to do what
@@Amddetailing Thank you for
why no clearcoat ?
everything is mixed together, follow the video carefully, everything is explained in it
Sto znaci PDR ? ( X DENT REMOVAL ) . Tata mata ko i uvijek
Paintlless Dent Removal ili uklanjanje udubljenja bez farbanja
how much do you charge for this kind of job?
400 euro
@@Amddetailing Roughly about the same money would cost to paint the two doors and fenders in Greece where I live.
it's not a problem, the problem is that people don't want to paint the entire element and spoil the factory coating, because later they have a problem when the car is sold, because more and more customers think that the car was in a big accident as soon as it was painted.
Put yourself in a situation when you are buying a car and you see that something has been painted, you immediately have doubts and avoid such a car.
Vi ste rođeni na balkanu haha ?
Da sto
@@Amddetailing negdje sam vidio komentar na nasem jeziku pa gledam jel translate ili hahahaha
Do you have an email address I would like some advice I have with my Honda odyssey ?
Yes tataragicalen@gmail.com or fb page Alen Tataragic
Kudos for trying, but this really needs 320g, sealer, blender, 2BC, 1 orientation, 3 CC to look right. The scratches are extremely obvious and jump out. Cheers
@@chops6474 what’s all that?
yes, it can be seen from 5 centimeters from the car and it looks like a scratch made of wood and because that side is polished and there are no scratches on the coating caused by washing and the color is refreshed, but after a few washes it will all blend together and not be noticeable
Next time, use less paint! Maybe 10% of what you showed. I do it in 2 steps, first colour paint, than clear