How to Replace Hood Lift Support 2010-2015 Lexus RX350
Вставка
- Опубліковано 28 сер 2024
- Buy Now!
New Lift Support Set from 1AAuto.com 1aau.to/ib/1ALS...
This video shows you how to install a hood lift support on your 2010-2015 Lexus RX350.
This process should be similar on the following vehicles:
2010 Lexus RX350
2011 Lexus RX350
2012 Lexus RX350
2013 Lexus RX350
2014 Lexus RX350
2015 Lexus RX350
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa5N/1A...
• Pocket Screwdriver
• Pick 1aau.to/oFf/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video.. followed the exact instruction and got a pair replaced in 10 min.
Thanks! I’ll be trying this tomorrow. Hope it’s as simple as your explanation.
Watched this video first, took 5 minutes to install the pair...just needed a flashlight to get screwdriver in place...made life easy...thanks for the video!
+Juan Johnson Thanks for the feedback! 1aau.to/m/Shop-TRQ
Excellent! Short and to the point. Just did it. Thank You!
Thank you - going out to the driveway to install them right now.
Excellent advice, a 10 minute job!
Thank you!!
She's making it harder than it needs to be. Take the top one off FIRST by prying the tab out and pulling the arm away from the ball that the socket fits into. (The the clip on the upper one is MUCH more accessible than the lower one). The lower one then just pops out easily once you have the upper one removed without prying the clip out.
To install the new ones, pop in the lower one first and then line up the upper one by raising the hood with your free hand while popping in the upper one. Once I figured out the right sequence, it took about 2 minutes.
Thank you.
Ty
DO NOT LISTEN TO THESE INSTRUCTIONS! I ruined my brand new hood strut because this idiot showed to move the metal clip on the new strut WHICH YOU DO NOT DO. The metal clip should only be messed with on the old part. I RUINED MY NEW STRUT! THANKS ALOT FOR YOUR WRONG INSTRUCTIONS!