I Filled My Tires With Grease So You Don't Have To || Fixing Leaking Lawnmower Tires

This is a true story, unfortunately. But I did put grease inside my tires in order to prevent the air from escaping thinking the grease would seal up the cracks inside the tire. It didn't even make it slightly better to be honest.
Anyway, in this video I decided to deal with the problem with a more permanent solution by fixing my leaking lawnmower tires with some inner tubes instead.
BTW!
The image quality of this blew me away! Its just insane how good cellphone cameras have gotten these days...
Disclaimer:
Due to factors beyond the control of BackmansGarage, I cannot guarantee against improper use or unauthorized modifications of this information. BackmansGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BackmansGarage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BackmansGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackmansGarage.

[@jacoballred]

I'm glad to learn that certain techniques do not work about stuff.

[@davidberry1379]

i just havnt had much luck putting tubes in the tubeless tires, the big problem is that the rims are really not designed for tubes and theres not much room for a tube to seat properly. The major problem is with the stems. The chinese tubes out there have stems that are way to short and keeping them from retracting inside the wheel is a real problem, if it does extend out far enough, the rim will often cut the stem because, like i said, the wheels are not designed for tubes..

[@simonsez4793]

zip tie the stem

[@NODARKNESSNOLIGHT]

Sir…….. sir, I wanted to see what would happen if you filled the ENTIRE tire with grease… I feel I have been sold a false bill of goods😂😂

[@BackmansGarage]

😆That would have been better, no doubt about that :D

[@conmanumber1]

Best to fill with builders expansion foam.

[@shanejzx1002]

This was very informative actually i like simple stuff like this

[@jasona6222]

On a tire/wheel you don’t care about…break the seal on one side of the wheel..then grab a funnel and a quart of latex house paint. It can be a messy process but will seal holes and weather cracked side walls. Works better than tire slim but you will not want to change the tire afterwards..it will take a sandblast or a grinder with a wire wheel to get it off.

[@briandevine1069]

I liked the music editing. Had the same issue with my mower as well last year. The S22 is just fine!!

[@BackmansGarage]

Thanks, worked out alot better than i initially thought 😄

[@ducttapeandzipties]

You could try the liquid latex sealant used in bicycle tires. It will flow through any leaks and seal them. It will stay liquid inside the tire for a long time and seal future leaks too.

[@BackmansGarage]

Will def try something like that in the future if i run into issues.

[@domenicozagari2443]

Mix the silicone with gas and paint it in the Tyre.

[@jbg6961]

Bra bildkvalitet 👍 nu blir gräset klippt i år igen 👍

[@BackmansGarage]

Tack, aa jag blev ganska förvånad över hur bra den klarade av att filma faktiskt 😄