Honda Ruckus MAX PERFORMANCE: Part 3
Вставка
- Опубліковано 28 лип 2024
- If you are trying to max out your Honda Ruckus or Zoomer with the stock engine (GET) to its full potential, this set up is the ticket!! We have spent hours upon hours figuring all this stuff out. Here are a few links below that will improve your ruckus performance in a major way. #ruckus #hondaruckus
Episode 1:
• Honda Ruckus MAX PERFO...
Episode 2:
• Honda Ruckus / Zoomer ...
PERFORMANCE PARTS:
Ruckus / Metro GET power up kit:
www.rollingwrenchdenver.com/p...
Ruckus / Metro performance cam:
www.rollingwrenchdenver.com/p...
Ruckus / Metro lighten flywheel:
www.rollingwrenchdenver.com/p...
Ruckus / Metro dip stick breather:
www.rollingwrenchdenver.com/p...
20mm Carburetor:
www.rollingwrenchdenver.com/p...
Ruckus fuel injection system:
www.rollingwrenchdenver.com/p...
Honda Ruckus Performance CDI box:
www.rollingwrenchdenver.com/p...
Ruckus 50 ultimate Reveno CVT kit:
www.rollingwrenchdenver.com/p...
Ruckus Performance exhaust:
HOTLAP SIDEWINDER
www.rollingwrenchdenver.com/p...
HOTLAP 666
www.rollingwrenchdenver.com/p...
MEGAPHONE:
www.rollingwrenchdenver.com/p...
Engine dress up kit:
www.rollingwrenchdenver.com/p... - Навчання та стиль
![Ruckus titanium valves & performance cam shaft [STEP BY STEP]](http://i.ytimg.com/vi/c7rDUXtKQQg/mqdefault.jpg)
I just bought my first Ruckus... so excited... Ill be hitting you guys up soon in the meantime...Im watching all the video's they help alot thank you!!
Heck ya!!! Welcome to #rucklife !
Enjoyed the videos as always
Love you show. Leaning lots thank you
Good series brah...You earned it on this one
I appreciate you
Love it, I’m working on my new Maddog trike and need all the help I can get!
Bro your a mad man ! Cheers
Awesome content!
Looks noice!
Great job, nice consistent get I wonder how she runs at sea level
nice video man, im learning alot from rolling wrench, appreciate it. 👍 i am bout to replace this piece on my ruck, any tips on it would be nice,im replacing the right side crankcase with oil stick, reason why is because someone had broken the exhaust mount holes due to over tighten.
Patreon man, otherwise no soup for you
I have a stock EFI GY6 125 on my UA-cam channel and your EFI tuner would work on my build! But I cant buy it standalone, could you sell them standalone? Love the vids :)
Will you pls gimme a link for the mirrors on this Ruck? Tu mucho!
Want one of these so bad
i didn’t know you were in colorado! i’ll be joking the ruckus family soon
Still wish there was a efi for qmb139 8pole and a capacitor should make it do able
Can you get some feed back from the owner about how it did at sea level? That would be great cause I'm super interested in doing this build just don't want to waste the money on GET motor if it would be easier to go faster with GY6. Thanks love the videos
How much is it to max out power and speed on a gy6 icebear maddog
Placed a couple orders already, but where can I get that lower cowel???
Did you have to get an efi bung for your exhaust?
will those hand controls work with the stock brakes
I like y videos
I have those same mirrors
Cute lil scooter
Super cute 🥰
If you had to build another 58cc MONSTER just like the one in the video, what would it cost?
It looks like that 58cc piston came from Wiseco. You need to figure out just how much you could bore the cylinder beyond the 58cc. It looks like there was plenty of meat left to go bigger, maybe even 75-80cc. If you could find a piston that is close in size you could have it reworked. If not, have Wiseco custom make the piston. Put that puppy in and ride the hell out of it for testing! You'd be the only one selling a big bore kit! What a killer machine that would be!
Do you have a local shop in Denver ?
Do you sell a full complete ruckus stretched out all modded
Im off a bit whT are taco gears
Hi friend, I'm from Argentina and I want to build my own ruckus project and I want to ask you if you can help me with it? Thank you
Need info! I bought a stretched ruckus.... I'm learning as much as I can and enjoy tinkering with it. I need to know, should my motor move up when I pull the throttle and drop when I release the throttle? Is that the point of the swing arm?
It sounds like you purchased a TRS Skinny stretch mount. If so, that is the mount that I know does that. It’s kinda odd. But it is designed that way. Any other mount is a solid mount, and won’t move
@@RollingWrench Much appreciated.
Hey what happened to the turbo gy6 build you were gona do?
This spring! I have some customer bikes to finish first :-)
Will the Reveno clutch kit work for a get engine with aftermarket carb jetted right aftermarket carb, intake and exhaust? Or does it need to be bored out?
Yes. Here is a link www.rollingwrenchdenver.com/products/ruckus-metro-reveno-clutch?ToPasteboard
@@RollingWrench so a stock bore get with just all available bolt ons will work with the Renevo kit?
Are y sell parts h rukhus
Szkoda ze w pl takich nie ma 😁
Do you know if a gy6 exhaust would fit a GET motor? my ruckus was straight pipe when I bought it and was rejetted.im a little tired of the noise and don't want to buy a stock exhaust. Also it hard to start in the cold. And won't stay in idle, unless I play with the throttle at stop
No it won’t. Nothing GY6 will fit GET :-(
@@RollingWrench ok thanks. Do you know if there's anything under 200$(with headers and exhaust). Just need some guidance.
@@pikachudesinaloac160 close to $200: www.rollingwrenchdenver.com/products/honda-ruckus-stainless-steel-performance-exhaust
@@RollingWrench thank you Papa Wrench
Is your whare house open?
Where in NC is the bike going, would like to ride with the owner
This is probably an old video cause ive seen this ruckus forsale on fb market for awhile around Huntersville NC. But its a clean ass bike though.
Quick question have you ever seen the engine call GY6K
Watch his videos. He recommends them as far as jumping to immediate gains.
That’s a Honda mower engine I believe. AKA GXV.
What would it cost to do another grom clon 190cc build??
😬$7500
when is the gy6 efi available
Soon! I am in the process of re mapping it :-)
Hello
wait so its possible to hit 60 on a GET? well if you arent so far above sea level? might have to look into this kit or parts living over here in cali
At sea level it’s definitely possible!
You do a good job give us a lot of information but dude you make it sound too easy for guys that's your first time I am got to explain more I'm good cuz I've been working on motorcycles and everything else above for 30 years but this fuel injection stuff man you're not explaining enough cuz you need computers and you need this and you need that
Why does that lil baby piston need so many rings lol
Ayyee
What up my man!
Bromance......gross.
That is 1 slow GY 171cc🤣 couple misleading points but props on putting out some good info. If you want a torque monster u shouldn't run Gears... Mid 40's with all those mods is...... Well.... Not good.
58cc is a super quick off the line for sure! I don’t think you watched the entire video. The gears are stock. We pulled them. Thanks your the support 💯🙏🏻
now do turbo
Bro buy malossi motor hahah watch thailand and philipines vlogg its not that expensive to bore up
Ahhh I know all about that brother!
If you could find a way to make a wide band sensor and Guage kit for under 60 bucks you could sell the hell out of them. Furthermore, you are great at pitch points, but as cheap as "scooter" owners are, you are missing the mark.
I have a kit that will be available in the next week or so. Our own brand $225. You can’t go cheap if you want accurate. I tried probably 10 different companies before I settled on this one. It’s super nice
Sorry miss video show R.W. I been tired because I take the dog out from 11pm to 4am mostly this dog go out 5 or 8 times a days! Dog name is scooter 156bls.!
Soo basically what im seeing & hearing is get on Amazon,ebay or alibaba & get a gyc motor as cheap as possible & bild it to whatever you want it to be because the stock motor while reliable is shit in comparison
Nooo, stock motor is super reliable. Sonia the gy6. I wouldn’t buy any parts from Ali, eBay or Amazon. You will get zero support.
Hey there I like your show but I'm getting a little sensitive you really mocking carburetors no it won't die if the carburetors set right and it's got the right spark plug in it nothing wrong with car repairs they've been around for a long time and they still please me you can have your fuel injection got to understand a lot of us can't afford that
That's terrible🤣. How have you been?
Bruh.😄 There is no way bruh.😄
I have taller tires, ultra low seat, drive face and a variator, some thinner oil and gear oil, and push 50 reliably.😄
No way?