I am loving your videos very much. One question and hope its not a silly one. Could you not of fitted the front seat that you removed from your van and fitted it there instead of buying that new one? Many thanks and keep up the great videos.
I suppose with some 'fettling' it could be made to fit but would have real seat belt issues as one of the belts is connected to the side of the van in the front of course. additionally, I wanted to fit the Truma underneath and I dont feel that is possible in any way using the original seat base and fame. hope that helps in some way. cheers.
Good point about solway panels. I am interested in getting them as I thought it was plug and play plus I found you because you have the same van I am looking at getting.
Hello, loving your content and van build, just embarking on a L4H3 Boxer conversion. See in your driver cab area you have an additional pocket near the sun shades. Did that come as standard or bought separately?
Hi and thanks for watching. it was in the van when I bought it. It is apparently an 'extra' that can be ordered on new van sales? A double edged sword though as although they are great for our wash bags etc, it did cause some hassle for the remis blinds...
Hi there. I was thinking about the Solway panels and found your video. I too have the H3. Unfortunately Solway have not taken your sound advice. I have bonded windows so I don't think there gonna work for me. I may just get the bits near the seat belt and the botton curved section. Thanks for the vid as I couldn't find any other info regards fitting.
glad it was helpful. you can order individual panels from solway direct or through magnum motorhomes. the parts around the bulkhead are well worth it for sure. I actually would use again but be more 'precise' about which panels i wanted rather than buy the complete kit.
Hi Did you bolt the seat to the floor befor pir boarding and latting then fill in the seat floor after or go straight through, im wanting one to go at the back of front passenger seats to join and create a corner sofa
I guess they didn't like the truth. Sol way is expensive, and so did not fit correctly otherwise there would be no need for corrections. 🤔 Great vid s keep it up. 🍺🍺✌️🇬🇧
I think so and that is why they don't have fitment videos on their website, however, in their defence, the end result is good and in my opinion worth the effort and hassle.
Hi there, great videos! given me a lot of help so far. regards your Truma ducting to the side/external wall. i take it with this position and the exhaust heading out the wall you've had no issues? i am siting mine in simalr place and whilst it all seems to be inline with the instructions, i wanted to get opinions before i cut holes in the wall.
Well spotted! I have filmed it all, just fitting the tambour door when a break in the weather and will then compile it all together. will probably be 3 or 4 parts as don't suspect anybody wants a james bond length instalment to watch. :-)
@@wiltshirecustomcamper7203 Thanks for the reply, I have checked the website and it does not state seat is crash tested. Do you carry passengers on your seat
Funnily enough, No! I use to work for Sony and now self employed in nothing related to vans or engineering. I just believe very very strongly that anyone can do anything they want if they put their mind to it. Leant that from intently watching someone plaster a wall thinking is was a 'hidden art' and finding it was actually very easy and no, I'm not a plasterer either :-)
@@wiltshirecustomcamper7203 lol that’s very true. Like you said anyone can do anything when they put their mind to it and also with the right information. I’ll like to sell our current van and get the Fiat Ducato L4H3 for day and weekend use. Am still waiting for the overhead cabinets video so I can see how you have done it 😊
Actually you're about the only video explaining anything about the Solway panels ..I've my panels coming on Monday and Jimmy actually pointed me towards your video. I've the h2 l3 so I'm wondering if the panel actually fits properly..🤔 I'll let you know!! I'm going to have the same issue as yourself with the front off side window, what did you do about the gap in the end?
I am very surprised to hear Jimmy pointing towards my video, after somewhat slating them unless he is pointing from a derogatory angle? I can imagine the " this guy is doing it all wrong so watch and don't do what he done....blah blah" anyway, on the gap front I have ordered something from Reimo but has not arrived yet, will video it when it comes and see how it fits.
@@wiltshirecustomcamper7203 actually he did tell me to watch your vid..mind you I had already ordered them by then so rather a captive audience somewhat!! 🙄🤣 I wonder if it was after your update video that he had a change of heart..🤔🤣 Just saw your wheel arch vid too...guess I'll be ripping my floor up too, why didn't you do this video a few months earlier!! 😉 Also the ceiling is up so really scuppered..hey ho!! Interesting videos though, thank you for the info...bit late though!! Hehe..🤣😂no, thankyou so much I mean that!! I'll keep you posted on the h2 side panel version fit..😉👍🏼
So did you order the H2 pillar covers ? as they don’t do pillar covers for H3 which is what I have. Also was it difficult to make them fit ?? Many thanks Gary H.
Is it possible to position the seat a bit further forward or does the fitment under the van not allow it. I want similar but less space between driver and seats behind. Also, could you not just have used the original bench seat in that position.
Thank you for your comment. Actually I had trouble with the seat frame and the chassis member underneath because it is so far back, if bought forward it will clear the chassis and fitment is easier. The reason for the seat so far back is for a table we want that is coming soon in a video. the original seat from the front posed too many seatbelt mounting issues and height issues to be tangible. I guess a good metalwork fabricator could overcome these things but very much outside of my skill sets.
Sounds to me like your trying to please Solway! To me there way to expensive! And didnt fit well! Just be honest at least that way Solway cant sort out there issues!
Your right. Iv just purchased a H3.
A H2 is simply to short for me height wise.
I started watching your videos because of the solway panels.
thanks for watching, all the best and good luck with your build!
I am loving your videos very much. One question and hope its not a silly one. Could you not of fitted the front seat that you removed from your van and fitted it there instead of buying that new one? Many thanks and keep up the great videos.
I suppose with some 'fettling' it could be made to fit but would have real seat belt issues as one of the belts is connected to the side of the van in the front of course. additionally, I wanted to fit the Truma underneath and I dont feel that is possible in any way using the original seat base and fame. hope that helps in some way. cheers.
The add on kit for the H3 is a good idea, solway panels take note!
Lets wait and see....
Good point about solway panels. I am interested in getting them as I thought it was plug and play plus I found you because you have the same van I am looking at getting.
Awesome, thank you!
Hello, loving your content and van build, just embarking on a L4H3 Boxer conversion. See in your driver cab area you have an additional pocket near the sun shades. Did that come as standard or bought separately?
Hi and thanks for watching. it was in the van when I bought it. It is apparently an 'extra' that can be ordered on new van sales? A double edged sword though as although they are great for our wash bags etc, it did cause some hassle for the remis blinds...
Hi there. I was thinking about the Solway panels and found your video. I too have the H3. Unfortunately Solway have not taken your sound advice. I have bonded windows so I don't think there gonna work for me. I may just get the bits near the seat belt and the botton curved section. Thanks for the vid as I couldn't find any other info regards fitting.
glad it was helpful. you can order individual panels from solway direct or through magnum motorhomes. the parts around the bulkhead are well worth it for sure. I actually would use again but be more 'precise' about which panels i wanted rather than buy the complete kit.
Hi
Did you bolt the seat to the floor befor pir boarding and latting then fill in the seat floor after or go straight through, im wanting one to go at the back of front passenger seats to join and create a corner sofa
yes, the seat frame is directly on the van floor and the pir board and internal floor goes around it.
Lovely work
Thank you! Cheers!
I guess they didn't like the truth. Sol way is expensive, and so did not fit correctly otherwise there would be no need for corrections. 🤔 Great vid s keep it up. 🍺🍺✌️🇬🇧
I think so and that is why they don't have fitment videos on their website, however, in their defence, the end result is good and in my opinion worth the effort and hassle.
Brilliant m8 well done great 👌 👍
Thank you! Cheers!
Hi there, great videos! given me a lot of help so far. regards your Truma ducting to the side/external wall. i take it with this position and the exhaust heading out the wall you've had no issues? i am siting mine in simalr place and whilst it all seems to be inline with the instructions, i wanted to get opinions before i cut holes in the wall.
Instructions you say? I must have missed those! I just chose a spot and went for it but has been running perfectly for the last year.
Can't seem to find the video on you doing the shower me old mucker did you do one on the shower I very much enjoy your videos 😉
Well spotted! I have filmed it all, just fitting the tambour door when a break in the weather and will then compile it all together. will probably be 3 or 4 parts as don't suspect anybody wants a james bond length instalment to watch. :-)
love the cupboards realy finish it 🤓🤓off
Great videos I'm just starting my build great content.
A quick question your bench seat does it come with a M1 N1 certificate?
thanks. i don't believe it has anything but do check the solway website for more details... best wishes.
@@wiltshirecustomcamper7203 Thanks for the reply, I have checked the website and it does not state seat is crash tested.
Do you carry passengers on your seat
I bet your a mechanical engineer like I am based on the things you said in this video 👍🏾
Funnily enough, No! I use to work for Sony and now self employed in nothing related to vans or engineering. I just believe very very strongly that anyone can do anything they want if they put their mind to it. Leant that from intently watching someone plaster a wall thinking is was a 'hidden art' and finding it was actually very easy and no, I'm not a plasterer either :-)
@@wiltshirecustomcamper7203 lol that’s very true. Like you said anyone can do anything when they put their mind to it and also with the right information. I’ll like to sell our current van and get the Fiat Ducato L4H3 for day and weekend use. Am still waiting for the overhead cabinets video so I can see how you have done it 😊
@@theoteam4641 editng first one today funny enough.....
@@wiltshirecustomcamper7203 that’s good, I’ll be waiting to watch it
Actually you're about the only video explaining anything about the Solway panels ..I've my panels coming on Monday and Jimmy actually pointed me towards your video. I've the h2 l3 so I'm wondering if the panel actually fits properly..🤔 I'll let you know!! I'm going to have the same issue as yourself with the front off side window, what did you do about the gap in the end?
I am very surprised to hear Jimmy pointing towards my video, after somewhat slating them unless he is pointing from a derogatory angle? I can imagine the " this guy is doing it all wrong so watch and don't do what he done....blah blah" anyway, on the gap front I have ordered something from Reimo but has not arrived yet, will video it when it comes and see how it fits.
@@wiltshirecustomcamper7203 actually he did tell me to watch your vid..mind you I had already ordered them by then so rather a captive audience somewhat!! 🙄🤣 I wonder if it was after your update video that he had a change of heart..🤔🤣
Just saw your wheel arch vid too...guess I'll be ripping my floor up too, why didn't you do this video a few months earlier!! 😉 Also the ceiling is up so really scuppered..hey ho!! Interesting videos though, thank you for the info...bit late though!! Hehe..🤣😂no, thankyou so much I mean that!!
I'll keep you posted on the h2 side panel version fit..😉👍🏼
@@nur5ey1 Thanks for the info, looking forward to the update.
Another great video thanks. Did you swap your front seats out too?
Thanks for your comment. Check out my front seat video for what I did with the passenger in the front.
Where did you buy the cushion please
it is the original cushions from the front double, all to be revealed in the tour vid coming soon.
So did you order the H2 pillar covers ? as they don’t do pillar covers for H3 which is what I have. Also was it difficult to make them fit ??
Many thanks Gary H.
Sorry, do you mean the rear door pillars or the bulkhead pillars? thanks
Is it possible to position the seat a bit further forward or does the fitment under the van not allow it. I want similar but less space between driver and seats behind. Also, could you not just have used the original bench seat in that position.
Thank you for your comment. Actually I had trouble with the seat frame and the chassis member underneath because it is so far back, if bought forward it will clear the chassis and fitment is easier. The reason for the seat so far back is for a table we want that is coming soon in a video. the original seat from the front posed too many seatbelt mounting issues and height issues to be tangible. I guess a good metalwork fabricator could overcome these things but very much outside of my skill sets.
How did the seats come out? I've been really looking forward to seeing how it went, loved the idea.
all good, van tour video coming soon.
@@wiltshirecustomcamper7203 great stuff, does this mean you have completed it all! Look forward to watching the tour
Great videos as usual 👌 could i ask what the dimensions are of the seat?
check out solway website for details of the seat. thanks.
Sounds to me like your trying to please Solway! To me there way to expensive! And didnt fit well! Just be honest at least that way Solway cant sort out there issues!