Bullfinch external shower point on self build campervan Citroen Relay / Ducato / Boxer / Promaster

Поділитися
Вставка
  • Опубліковано 10 жов 2024

КОМЕНТАРІ • 35

  • @chriscrook7511
    @chriscrook7511 2 роки тому +1

    Great video, so much so made me reconsider the location for my own which I’m about to fit. Keep the vids coming pal, very enjoyable and informative and always get a sense that the jobs you undertake have not only been thoroughly considered prior to being undertaken but have also been done properly.

  • @sirbrian9404
    @sirbrian9404 2 роки тому +2

    Another brilliant insight m8 always makes me chuckle 😃 love your sense of humour brilliant also a great job as always 👍 hope you and your family are well. Stay safe me old mucker.

  • @keithwalden5855
    @keithwalden5855 2 роки тому

    If you warm the pipe a little or even wet the pipe inserts they do go in a little easier. Love the laid back attitude, keep it up!

  • @johnmcenroe3683
    @johnmcenroe3683 2 роки тому

    Organized , clean and meticulous , Awesome job . And i am serious ...

  • @Michal_Zubek
    @Michal_Zubek Місяць тому

    Hello!
    Thx for great video. It inspired me to do the same to my campervan.
    I have one problem and would be very grateful for any feedback.
    How you turn on your water pump when using shower to make a pressure?
    In mine, kitchen tap and bath shower has 12v connections and turn on pump when used.
    How it’s resolved in your car?
    Thx a lot!

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  Місяць тому +1

      I leave my pump on all the time and it stays primed ready to use, the accumulator stops it from 'pulsing' all the time. when i use the shower the pressure drops and the pump then activates. alternatively simply have a pump on/off switch and turn it on whenever you need water for sink, toilet or shower and not bother with the 12v micro switches. i think that's what most people do. hope that helps.

    • @Michal_Zubek
      @Michal_Zubek Місяць тому

      Yes it helps thank you!
      I added extra switch to turn on/off water pump

  • @davidm9643
    @davidm9643 2 роки тому

    Make a large envelope stick just under where cutting. Will catch most of the metal bits

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому

      Yes, great idea. On my next build I am going to experiment with all different ways including that, also a large magnet I've seen used, a vacuum underneath as you might use with plasterboard drilling etc.

  • @BretSnyder
    @BretSnyder 2 роки тому

    Another enjoyable video. Your setup is a lot more convenient than mine.
    Unrelated, is Salisbury Plain near Bath? We toured Bath and a small village Lacock a few years ago. Beautiful area.

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому +1

      Thank you. and yes, Lacock is not far from me and travel very nearby on way to golf club. We don't go to Bath very often although only 45ish mins as too many tourists and inflated prices.... sorry but true.

    • @BretSnyder
      @BretSnyder 2 роки тому

      @@wiltshirecustomcamper7203 sorry for my contributions to inflation. 🙂

  • @jessestrum
    @jessestrum 2 роки тому

    hi i like what a good job your doing , i have copied some of your installs, just comming to the end of my ducato conversion had a few highs and a few lows my next jobs is to try and get some tasteful decals . do you know of any good suppliers , and will you apply to dvla for camper van status. keep up the good work cheers john

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому

      thank you for the kind words. in regards to decals, I had my local signwriter/printer company do it. all will be revealed at the van tour. I am not currently planning to apply to DVLA.

    • @jessestrum
      @jessestrum 2 роки тому

      thanks sounds like a good idea about decals@@wiltshirecustomcamper7203

  • @keithwalden5855
    @keithwalden5855 2 роки тому +1

    Quick question. Have you scared the skitters outta yourself yet by adding up your expenditure?

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому

      Oh! that's what the cold sweats were!

    • @keithwalden5855
      @keithwalden5855 2 роки тому

      @@wiltshirecustomcamper7203 🤣 most probably.
      Seriously though have you done a spreadsheet (or even just made notes on a toilet roll)?
      I'm trying to convince my Boss (SWMBO) it's the way to go once we sell our moho).

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому

      @@keithwalden5855 I worked out carefully how much all the parts would cost before we stated so had a flavour for what it would be. did not account for the extras like the bullfinch but these bits are only small costs in the big scheme of things. we decided that if we were going to do it, might as well try, at least, to do a decent job of it. I made the decision at the start to not even begin unless the finances were in place for the components on my wish list. True I could have gone out and bought a nearly new Hymercar for the money I've spent but my spec is far far beyond... or I think they are?

    • @keithwalden5855
      @keithwalden5855 2 роки тому

      @@wiltshirecustomcamper7203 that's why I want to do our own. You have exactly what you want.
      You also know how the thing is put together so that it's easier (relatively) to snag any problems.
      Thanks for the reply.

    • @BretSnyder
      @BretSnyder 2 роки тому

      @@wiltshirecustomcamper7203 your setup is way better than the factory cookie cutter vans. And you doing it yourself and filming the whole process is a great contribution to the rest of us.
      This last year I have been fixing all the odds and ends on my Roadtrek. Amazing how fast it all totals up.

  • @stevebrown6665
    @stevebrown6665 2 роки тому

    Often fancied one of those on my new build but they’re quite pricey

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому

      Yes, it was £65 ish pounds. quite expensive for what it is but very handy none the less.

  • @1billycandoit
    @1billycandoit 2 роки тому

    Hi where can I get the alloy corner trim regards Bill I am watching every episode

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому

      I got all the aluminium parts for the cabinets along with the furniture board from Morlands. hope that helps.

    • @1billycandoit
      @1billycandoit 2 роки тому

      Thanks mate starting today bluddy floor was manky dirty sweat just dropped off me yesterday think I lost weight lol

    • @wiltshirecustomcamper7203
      @wiltshirecustomcamper7203  2 роки тому

      @@1billycandoit 😅😅 I feel your pain on that one, it was same for me. I got through a good whole small tin of hammerite white after a good hard wire brush to get the crud off. why are ex-work vans always such a state. if you are just starting my best advice would be to think carefully about order of installation. if you are doing a fly screen or step or LPG underslung tank for example, these are pretty much first and anything else that involves the van floor and holes before laying the flooring. good luck with it.👍

  • @thenoworriesnomad
    @thenoworriesnomad 2 роки тому

    If its just or washing muddy or sandy things then cold water would be fine...