That's a sweet setup. I like seeing how you have your camper laid out. My wife and I are on a traveling dirt sprint car team. We have a 30 ft 5th wheel camper that we travel with during the racing season. Thank you for the video. I enjoyed it.
Thanks for the comment! Once I get the camper set up and settled in a bit I plan to do a more in depth tour and detail some more things that help with living in a camper.
@@DownhillWelder300 you're welcome. I'm looking forward to that video. There's definitely a lot of things that go into living in a camper while on the road traveling. We enjoy it a lot more than staying in a hotel. What surge protector do you use? We use a watch dog surge protector that has Bluetooth so you can monitor everything.
I’m glad you said that! I’m actually having to get one. My last surge protector stopped working and have been looking at different ones. I like the ability to monitor it!
For those who are probably having a fit about how far back your camper is, you have plenty of weight counting in front of the axle, all that welding equipment is probably more weight than the tongue weight of that camper!
Not much difference between this and a large bumper pull travel trailer, weight is still off the back end. Don’t worry about the mule, just load the wagon.
@@NTM2009doubtful, these have an 8k lbs payload rating, trailer likely has 2k lbs of tongue weight, leaves 6k roughly left for it to be overloaded. That welder doesn’t even weigh close to that
@KDIGGG not even close to 8k payload. With the diesel engine that truck will have ~4800lb payload. Bumper, welder, bed, gear , pin weight, people it will be darn close if not over payload
Back in the late 70’s when I was 16 years old I got to work on a pipeline for the summer as my buddies Dad was a big boss. It was hard work but we had so much fun that summer. I thought I was rich making $5 per hour. 😅
Was an oiler for a year and a half, wasn't for me. Now just a hoe hand in civil. Cool to watch some content about the pipeline and bring me back, stay safe out there and have fun bud. 🤙🏻
I don’t weld (but I think it’s cool) or hual a camper but I’m glad YT recommended this video 😂 simple, quality, educational. These are my kinds of videos
That hitch is such a good idea. Keeps it low profile and small footprint. Im gonna be doing the same with my next bed. Great video as always! Safe travels on the road, brother!
Thanks! You understand how limited space is and how important it is to find something that works for your specific situation. Thankfully this hitch works perfectly! Thanks for the compliment and you be safe as well!
Found your channel during the truck tour videos and came back for this one. Thanks for sharing a little piece of your life with the internet. I’d love to see a day in the life video once you get rolling on your new project. Keep it up!
Best piece of advice for someone lookin to get on as a helper and hopefully break out. Used to be an environmental laborer before I enlisted and I miss the ROW
sir. I just found your page... I figured it would be awfully rude of me to tell another man to make sure he pulled his rod... LOL Nice job all the way around !!
Damn bro you have a sweet setup Literally everything you need you have You explain everything too I don’t know shit about campers Know a little something now 😂
I'm a musician up here in Canada and really enjoy your videos. I always figured if I wasn't making music, i'd still be doing somethin with my hands. Great to get a look into a day in the life!
I started on the pipeline right out of welding school with the dream of having a beautiful rig like you have. Done a lot of Kinder Morgan lines down in Alabama and Georgia. But as time went on I started wanting to get into the equipment side of things and after a lot of bothering for a chance for some seat time I found my passion. I enjoyed the welding side but that cold A/C in the cab mid summer changed my mind lol. I run a utility pipe crew in Charlotte, NC now and home every night. We need more people and channels like this to spotlight the industry and maybe draw in some of the younger generation. I’m 35 now and it’s almost impossible to find young people who have the drive and passion to learn the trades. There is lots of money to be made out here if you stick with it.
Honestly, I just turned in because your truck was a good looking rig, I’m not a Dodge guy but you still a great looking truck. wishing you much success as you start your channel.
Love the video man, absolutely beautiful setup truck and welder looks amazing also love the camper! Been thinking about trying to learn pipeline welding in the future current active duty airforce . 🤟🏽
@@DownhillWelder300 welcome brother. Did this for many years and liked it while I did it but not being away from my loves. So a couple years GM offered e something I couldn’t refuse. So be safe out there while you’re away from home.
I to was a traveler pipe lines and worked on power lines towers and footings enjoy my time on the road . I am new subscriber here and currently retired in south east Asia . 😊
That’s also on my list to do. Prices won’t be very accurate though. We built the house and shop right before Covid. We got pretty lucky and couldn’t come close to building a house and shop like we have now. Times have certainly changed.
That truck and trailer are like a limousine compared to what I had back in the 80's. Had a 79 ford one ton dually with my welding bed on it, 200 sam that had about a million hours on it, still run smooth, 23 foot pull behind camper that was made in the 60's, no insulation, but, it made me the dollars. Great looking rig !
New to your channel, sweet rig man really nice. You crack me up reassuring everyone on certain things. Haha can definitely tell you read comments.. gave you a follow 👍
One possible way to clean corrosion off inside them contacts is take like 220 grit sand paper cut a strip 1/4-3/8" wide and about 4"long, fold it in half and use a feeler gauge to work it in and out. Company comms guy also said whenever you can get a pencil eraser in an area to clean, them work good also. Sharp looking set-up!
I talked to a guy in NJ the other day. He had a very similar rig . He was heading to Tennessee for a welding gig. His welder was painted white like his truck.
The using the chrome socket with an impact and no one died line had me goin pretty good. I to will occasionally use chromes with an impact and in my experience no has died either
I was wondering why this truck looked so damn familiar cuz this the first video I've seen of yours but then I seen the Illinois plate and said ahhh yes the poor fella lives in the same shit state as me lmao only good part left about this state is the white tail deer and the little bit of beautiful scenery we got left. I'm in central ILLINOIS bout 30 minutes north of the U of I in Paxton. Good luck to ya man stay safe dout there.
@@DownhillWelder300so I’ve come to the conclusion… I think Ford makes the best truck. Very close by GM, and Ram is dead last…. I know all have problems… but let’s be real.. and I’ve learned this cause I own the same truck 2018. And it’s always having problems. I’m meticulous as you are.. and it’s very frustrating. I hope one day after I replace every part on the truck it will go a year with no problem 😂 What’s your thoughts if you were to buy another truck?
I’ll own a GM next time. 100%. I’ve been a GM owner my whole life. My pickup at home is a Silverado. When i was buying this ram i was going of numbers (price) only since it was going to be a work truck. Option for option in 2017 this ram was about 7,000 cheaper than a GM and about 5-6,000 cheaper than a ford. Needless to say i got exactly what i paid for. The bad thing is, i really like the truck but i don’t ever want to go through this again with a vehicle. It’s endless it seems.
Worked drilling rigs for years. Traveling like this for work is a rough life. I ran a powerstroke and a 5 slide montana. Better than motels or backseats.
@logantoney4525 balls are hard on 5th wheel trailers unless the riser is on the bed and not the trailer. They are not designed to have that much leverage on them.
Those do look nice, but my gooseneck ball puts the camper too close to the welding machine. It would hit if i turned anything tighter than a slight curve.
Hey man, I’m from Texas and I graduate here in about a month and I’ve always wanted to hit the pipeline.. and I would love to maybe see if you know where I should get started on trying to get on? Just get back to me and let me know what the best thing for me to do would be.. I have a lot of experience welding and running heavy equipment.. keep up the content bro🤙🏽 stay safe out there man. safe travels!!
Thanks a lot. I’ll have a video up very soon going over this exact topic. I’ve had lots of questions about this and will hopefully answer everyone at once.
Holy crap, I’m pretty sure we’ve passed each other a couple times in Godfrey, Jerseyville, and Carrollton. I saw the “Weld” plate in this video and everything clicked. What a small world that this popped up.
Tip for the future ive worked in commercial tires for 20ish years. When i get customers with trailers i never recommend trailer tires honestly not sure why they even make them they usually last a thousand miles then blow. Instead i sell and all steel load range E or F truck tire that will last nearly forever. Also grand design makes the best trailers money can buy they are built like tanks
That’s exactly what i did, bought the highest load range all steel tire i could find. Tires are way cheaper than having an accident or worse, getting hurt changing a tire at 3:00 am on the interstate.
I was saying unpin handle, unpin handle. Its not going to latch. Mount your trailer plug up under the bed at rear with opening pointed down. Thats how i had one mounted on old welding rig i bought. Curt 58145 trailer plug has been good for me. 10 years and counting so far
Just happened across your channel because I recognized the truck. I believe you used to live on the same street (across the street) as my inlaws? (the Brinks). Nice truck and good channel. Subscribed.
Have you ever looked into just getting a gooseneck head for the camper? I’m not sure exactly where to buy them but I know they make them and it seems like it would be a lot simpler and save some time plus put the weight just a little more forwards, even though it doesint matter because the welder puts a lot of weight to the front, just a suggestion
The bed is a custom built welding bed built by Hot Shot Specialty welding in Dallas Ft Worth. My truck has leaf spring rear suspension with 2” lift blocks and air lift air bags. I have an entire video covering the specifics of the truck and a video on the bed.
Cool rig. I've got a 22 mega cab 1 ton dually and I like you work bed. Can you share where you got it from? Oh, I noticed the ram emblem at the back, sets a part. Thks for any info.
Thanks a lot! I really appreciate it! Yep, that is the plan for a video coming up. You’re about the 10th person to ask for that video. I’ll try to get it together sooner than later.
It’s a curt brand hitch. The hitch itself and the base it sits in i bought and simply bolted it to the bed with some 1/2” thick angle iron and 3/4” grade 8 bolts. Has worked perfect.
It’s a 48x80. 16’ side walls. Stay tuned, I’m going to a complete shop tour soon. I’ve had a lot of interest in the building since i started the channel.
Make sure you subscribe! I plan to do an entire video of my path to becoming a welder and things everyone could do better or not at all in their career.
I love your truck and it looks awesome with the camper on the back and what made you pick the colour white for the truck and I just subscribe to your channel
Thanks for the compliment!! I appreciate it! I picked white because in the summer nothing stays cooler than a white truck. I’ve had red, black grey and white trucks and by far the easiest to keep clean and cool was a white truck.
I got my start working for a mechanical contractor welding uphill. It’s definitely a tough road and you almost always need to know somebody in the industry especially when work is slow.
It’s more than one item, but i would say a toolbox with an assortment of tools like screwdrivers, pilers, wire strippers, socket set and a utility knife.
I agree. I’ll probably never have a truck this nice again. Had to do it once. Each rig I’ve owned had over 250,000 miles on it when i retired it. I hope to get closer to 300,000 to 350,000 on this one. Sitting at 161,000 currently.
What part of North Dakota were you working in? Raised and live on the eastern half. Will be venturing out west and into Montana next week though to pick up a motorcycle.
@@DownhillWelder300 I expected you to say out west. That’s cool, I’m an hour and a half from Fargo in the middle of nowhere. Go there quite often though.
Yes, that’s the plan. I have to work out some details with what is allowed and what isn’t on the job site, but my intent is to cover everything that we do on the job!
I got a question I’m wanting to be a helper in the pipeline I have stick experience but I don’t believe enough to test out on my own do you have any tips on where to look or suggestions ?
That's a sweet setup. I like seeing how you have your camper laid out. My wife and I are on a traveling dirt sprint car team. We have a 30 ft 5th wheel camper that we travel with during the racing season. Thank you for the video. I enjoyed it.
Thanks for the comment! Once I get the camper set up and settled in a bit I plan to do a more in depth tour and detail some more things that help with living in a camper.
@@DownhillWelder300 you're welcome. I'm looking forward to that video. There's definitely a lot of things that go into living in a camper while on the road traveling. We enjoy it a lot more than staying in a hotel. What surge protector do you use? We use a watch dog surge protector that has Bluetooth so you can monitor everything.
I’m glad you said that! I’m actually having to get one. My last surge protector stopped working and have been looking at different ones. I like the ability to monitor it!
I’m sitting here yellin “the lock-in pin dude! The lock-in pin!!!” at 15 mins 🤣🤣
For those who are probably having a fit about how far back your camper is, you have plenty of weight counting in front of the axle, all that welding equipment is probably more weight than the tongue weight of that camper!
You’re one of few that have commented and understand the whole thing. Thanks!
Not much difference between this and a large bumper pull travel trailer, weight is still off the back end. Don’t worry about the mule, just load the wagon.
Yep lots of weight up front still. Probably enough weight that it's over payload
@@NTM2009doubtful, these have an 8k lbs payload rating, trailer likely has 2k lbs of tongue weight, leaves 6k roughly left for it to be overloaded. That welder doesn’t even weigh close to that
@KDIGGG not even close to 8k payload. With the diesel engine that truck will have ~4800lb payload. Bumper, welder, bed, gear , pin weight, people it will be darn close if not over payload
Back in the late 70’s when I was 16 years old I got to work on a pipeline for the summer as my buddies Dad was a big boss. It was hard work but we had so much fun that summer. I thought I was rich making $5 per hour. 😅
Nice!! Thanks a for sharing!
I like your style brother!! Keep up the good videos!
Was an oiler for a year and a half, wasn't for me. Now just a hoe hand in civil. Cool to watch some content about the pipeline and bring me back, stay safe out there and have fun bud. 🤙🏻
Thanks a lot! Hope you stick around for more.
I don’t weld (but I think it’s cool) or hual a camper but I’m glad YT recommended this video 😂 simple, quality, educational. These are my kinds of videos
Thanks! I appreciate that!!
That hitch is such a good idea. Keeps it low profile and small footprint. Im gonna be doing the same with my next bed. Great video as always! Safe travels on the road, brother!
Thanks! You understand how limited space is and how important it is to find something that works for your specific situation. Thankfully this hitch works perfectly! Thanks for the compliment and you be safe as well!
Great video Brother, love to see it.
That rain gutter trick is good to know, stay safe !
Thanks a lot! Yep, it works great! Thanks for the comment!
I gotta say I like your truck build as of being an isolation tech for 13 years I see a lot of welders across the country I love seeing clean builds
Thanks a lot! It’s always nice hearing when someone appreciates the work and detail that goes into it. Thanks for taking the time to comment.
That welding truck is CLEEEANN! Looks really good
Thank you very much!
Found your channel during the truck tour videos and came back for this one. Thanks for sharing a little piece of your life with the internet. I’d love to see a day in the life video once you get rolling on your new project. Keep it up!
Thanks for checking back! I absolutely plan to cover what we do daily on the job. Thanks for the request!
I enjoy hearing an seeing your take on things my man. I’m ocd as it gets so I like things nice and clean and everything has its place
It’s a problem i don’t mind having! lol
Best piece of advice for someone lookin to get on as a helper and hopefully break out. Used to be an environmental laborer before I enlisted and I miss the ROW
sir. I just found your page... I figured it would be awfully rude of me to tell another man to make sure he pulled his rod... LOL Nice job all the way around !!
Thanks!
Very nice setup my brother.Be safe God bless
Damn bro you have a sweet setup
Literally everything you need you have
You explain everything too
I don’t know shit about campers
Know a little something now 😂
Sweet rig, I’ve never watched a pipeline welder channel before and was always interested when I seen you guys at campgrounds. I’ll be following
Thanks for the compliment and the support! I’ll be posting a video at least once a week!
Wow beautiful rig man. , rig welder from up in Canada and I am a big fan of that set up ! Thanks
Thanks a lot! I appreciate that!
I'm a musician up here in Canada and really enjoy your videos. I always figured if I wasn't making music, i'd still be doing somethin with my hands. Great to get a look into a day in the life!
Thanks for your support.
I started on the pipeline right out of welding school with the dream of having a beautiful rig like you have. Done a lot of Kinder Morgan lines down in Alabama and Georgia. But as time went on I started wanting to get into the equipment side of things and after a lot of bothering for a chance for some seat time I found my passion. I enjoyed the welding side but that cold A/C in the cab mid summer changed my mind lol. I run a utility pipe crew in Charlotte, NC now and home every night. We need more people and channels like this to spotlight the industry and maybe draw in some of the younger generation. I’m 35 now and it’s almost impossible to find young people who have the drive and passion to learn the trades. There is lots of money to be made out here if you stick with it.
Thanks a lot. I appreciate the compliment and the support. I’m going to try and do what i can.
Honestly, I just turned in because your truck was a good looking rig, I’m not a Dodge guy but you still a great looking truck. wishing you much success as you start your channel.
Thanks a lot! I really do appreciate the compliment and your support!
Love the video man, absolutely beautiful setup truck and welder looks amazing also love the camper! Been thinking about trying to learn pipeline welding in the future current active duty airforce . 🤟🏽
Gtrar! Glad to hear it! Thanks for your service! I appreciate the kind words!
Awesome setup brother!!!
Thanks a lot!
@@DownhillWelder300 welcome brother. Did this for many years and liked it while I did it but not being away from my loves. So a couple years GM offered e something I couldn’t refuse. So be safe out there while you’re away from home.
I to was a traveler pipe lines and worked on power lines towers and footings enjoy my time on the road . I am new subscriber here and currently retired in south east Asia . 😊
Thanks for the follow! I appreciate your support!
Cool video I may weld when I get older, keep it up!!
Thanks for the compliment!
Very Nice! Appreciate you sharing!
Thanks for the comment! I appreciate you taking the time to comment!
I love your truck it looks so good
Thanks a lot!
Safe travels bud God bless!!
Thanks!
You should make a video of a shop tour! Price breakdown, size, tips etc.
That’s also on my list to do. Prices won’t be very accurate though. We built the house and shop right before Covid. We got pretty lucky and couldn’t come close to building a house and shop like we have now. Times have certainly changed.
That truck and trailer are like a limousine compared to what I had back in the 80's. Had a 79 ford one ton dually with my welding bed on it, 200 sam that had about a million hours on it, still run smooth, 23 foot pull behind camper that was made in the 60's, no insulation, but, it made me the dollars. Great looking rig !
I understand that! Thanks for the compliment!
Amazing quality on these videos
Thanks for the compliment. I’m learning as i go.
Excellent setup
Thanks a lot! I appreciate you taking the time to comment!
Sweet looking truck
Thanks!
New to your channel, sweet rig man really nice. You crack me up reassuring everyone on certain things. Haha can definitely tell you read comments.. gave you a follow 👍
I appreciate it! Thanks for your support!!
Wow, a man’s dream to have a garage like that
It was definitely mine! Very lucky to have it for sure.
Not judging you my friend, I enjoyed your content and subscribed
Thanks a lot! I appreciate that!
Looks good good luck ole son
Thanks a lot!
One possible way to clean corrosion off inside them contacts is take like 220 grit sand paper cut a strip 1/4-3/8" wide and about 4"long, fold it in half and use a feeler gauge to work it in and out. Company comms guy also said whenever you can get a pencil eraser in an area to clean, them work good also. Sharp looking set-up!
Thanks for the suggestion Cory! I’ll give that try next time.
Nice , be safe out there.
Thanks! You too!
I talked to a guy in NJ the other day. He had a very similar rig . He was heading to Tennessee for a welding gig. His welder was painted white like his truck.
I thought about painting the machine white, but i was too nervous about not matching the truck perfectly.
The using the chrome socket with an impact and no one died line had me goin pretty good. I to will occasionally use chromes with an impact and in my experience no has died either
Hahahaha glad someone can relate!
I was wondering why this truck looked so damn familiar cuz this the first video I've seen of yours but then I seen the Illinois plate and said ahhh yes the poor fella lives in the same shit state as me lmao only good part left about this state is the white tail deer and the little bit of beautiful scenery we got left. I'm in central ILLINOIS bout 30 minutes north of the U of I in Paxton. Good luck to ya man stay safe dout there.
Yep! We installed a regular station in Paxton. I’m up around that area all the time. Thanks for the comment!
I don’t travel no more for work . Sold my love shack and miss it , my next one WILL full auto level jacks on the 5th wheel camper .
Great content! Keep it coming
Thanks for the support! I appreciate it!
@@DownhillWelder300so I’ve come to the conclusion… I think Ford makes the best truck. Very close by GM, and Ram is dead last….
I know all have problems… but let’s be real..
and I’ve learned this cause I own the same truck 2018. And it’s always having problems.
I’m meticulous as you are.. and it’s very frustrating. I hope one day after I replace every part on the truck it will go a year with no problem 😂
What’s your thoughts if you were to buy another truck?
I’ll own a GM next time. 100%. I’ve been a GM owner my whole life. My pickup at home is a Silverado. When i was buying this ram i was going of numbers (price) only since it was going to be a work truck. Option for option in 2017 this ram was about 7,000 cheaper than a GM and about 5-6,000 cheaper than a ford. Needless to say i got exactly what i paid for. The bad thing is, i really like the truck but i don’t ever want to go through this again with a vehicle. It’s endless it seems.
@@DownhillWelder300 100% agree man! At least it makes for a lot of good video content haha
@@hellofreeman6653 that’s the truth!
Great video
Thanks a lot!
Worked drilling rigs for years. Traveling like this for work is a rough life. I ran a powerstroke and a 5 slide montana. Better than motels or backseats.
Best part is not having to drag your stuff in and out of a hotel room.
Why not run a hitch with your ball I love mine and way better than having to mess with a hitch like you are?
@@DownhillWelder300 that's for sure. Even something as simple as fr's can be few hundred each. I always made sure to bring in as much as possible.
@logantoney4525 balls are hard on 5th wheel trailers unless the riser is on the bed and not the trailer. They are not designed to have that much leverage on them.
Just subscribed…enjoyed the video 👊
Same
Thanks! I’m glad. I appreciate you supporting the channel!
Awesome video
Thanks a lot!
@DownhillWelder300 very welcome 🙏! I just subscribed, so good luck 👍🏻
Nice new channel subscribed
I’m a rig welder from Texas
Thanks a lot!
You bet what job you take on this trip ?
Doing a 30” job. Cut outs, new pipe relocation and hydro testing. Gonna be a good one!
Dang yeah that’ll be a good one be needed for a couple months
That’s a lot nicer than the 19’ Prowler that I started with in 1969.
Thanks a lot!
That’s a stabbin cabin on wheels. 😎.
Hahahaha
How come you don’t have to run any grease on that plate? Does it bind up when you are turning at all? Sweet rig by the way!
Did this on the building end of pipeline in the 70s and 80d. Motels and small campers in West Virginia
Thanks for the comment!
The anti-seize 😂😂😂. Working on the camper is just your away from home honey do list.😊
That’s exactly right!
You need to take a hard look at the Reese Goose Box. No more messing with 5th wheels etc. Worth every penny.
Those do look nice, but my gooseneck ball puts the camper too close to the welding machine. It would hit if i turned anything tighter than a slight curve.
Hey man, I’m from Texas and I graduate here in about a month and I’ve always wanted to hit the pipeline.. and I would love to maybe see if you know where I should get started on trying to get on? Just get back to me and let me know what the best thing for me to do would be.. I have a lot of experience welding and running heavy equipment.. keep up the content bro🤙🏽 stay safe out there man. safe travels!!
Thanks a lot. I’ll have a video up very soon going over this exact topic. I’ve had lots of questions about this and will hopefully answer everyone at once.
Nice setup I think you have enough weight forward of the axle you are in good shape keep them coming
I believe so. It pulls so nicely this way i couldn’t imagine doing anything different that would make anything better.
Holy crap, I’m pretty sure we’ve passed each other a couple times in Godfrey, Jerseyville, and Carrollton. I saw the “Weld” plate in this video and everything clicked. What a small world that this popped up.
Oh yeah, I’m over that way a lot!!
How do I get into working as a pipe welder? I’m taking classes now but idk how to get in
You guys testing anymore welders by chance?
mint set up
Thanks!
Fuck sakes right as I'm ready to drop the pressure ticket dream this guy shows up lol. Nice work brother
lol thanks a lot!!
@@DownhillWelder300 yesir
Good vids 🎉🎉
Thanks a lot!
A video on your shop would be great, looking for ideas.
I’m definitely going to need to do one. You’re about the 15th person to ask for one. lol
I agree. I want to know how the septic dump station works. I'd like to have that in my shop but it's no where near my septic.
Tip for the future ive worked in commercial tires for 20ish years. When i get customers with trailers i never recommend trailer tires honestly not sure why they even make them they usually last a thousand miles then blow. Instead i sell and all steel load range E or F truck tire that will last nearly forever. Also grand design makes the best trailers money can buy they are built like tanks
That’s exactly what i did, bought the highest load range all steel tire i could find. Tires are way cheaper than having an accident or worse, getting hurt changing a tire at 3:00 am on the interstate.
Thanks for sharing
No problem! Thanks for watching!
Lovely truck bed. Nice to see someone take good care of everything. That way, it takes care of you. I’ll sub until the day welding becomes political.
Thanks for the compliment and for subscribing! I really do appreciate it!
I was saying unpin handle, unpin handle. Its not going to latch.
Mount your trailer plug up under the bed at rear with opening pointed down. Thats how i had one mounted on old welding rig i bought.
Curt 58145 trailer plug has been good for me. 10 years and counting so far
LOL I knew there would be some people.
I’m definitely going to try that plug. I have a few trailers i need to change the plugs on. Thanks for the tip.
Just happened across your channel because I recognized the truck. I believe you used to live on the same street (across the street) as my inlaws? (the Brinks). Nice truck and good channel. Subscribed.
Yep! That’s me. We loved living across from them! Great neighbors and neighborhood! Thanks for subscribing and tell them we said hi!
@@DownhillWelder300 I'll tell em. Thanks for the reply
Have you ever looked into just getting a gooseneck head for the camper? I’m not sure exactly where to buy them but I know they make them and it seems like it would be a lot simpler and save some time plus put the weight just a little more forwards, even though it doesint matter because the welder puts a lot of weight to the front, just a suggestion
I have, but that puts the camper too close to the welding machine. It would end up hitting when i turn.
Whered you get that airbag kit? Been looking for one just like and havent found it but ive probably just overlooked it
I’m pretty sure i got it on Amazon. It’s airlift brand. Wireless controller would be what i searched for.
What bed is that? did your truck come with coil rears? what Air bag system do you have for the truck?
The bed is a custom built welding bed built by Hot Shot Specialty welding in Dallas Ft Worth. My truck has leaf spring rear suspension with 2” lift blocks and air lift air bags. I have an entire video covering the specifics of the truck and a video on the bed.
Nice ride
Thanks a lot!
Baddass Ram 👍💪🏻🇺🇸
Thanks a lot!
And thank you for the antisieze.
I thank myself every time i take a bolt out or a nut off! Hahaha
@DownhillWelder300 That's how j am with my grader. Saves time and money.
Cool rig. I've got a 22 mega cab 1 ton dually and I like you work bed. Can you share where you got it from? Oh, I noticed the ram emblem at the back, sets a part. Thks for any info.
Thanks! Unfortunately the guy that built this bed no longer builds beds. He was the best! Thanks for the question, i appreciate it.
plug-in microphone would be a good investment
Thanks for the suggestion! Do you have any experience with any in particular?
Dream set up brother, can you give us a shop/property tour?
Thanks a lot! I really appreciate it! Yep, that is the plan for a video coming up. You’re about the 10th person to ask for that video. I’ll try to get it together sooner than later.
I just subscribed, dont let me down! Lol.
Me too😂
I’ll try my best not to.
What hitch is this? I’ve got a flatbed I need a 5th wheel hitch on and this looks perfect
It’s a curt brand hitch. The hitch itself and the base it sits in i bought and simply bolted it to the bed with some 1/2” thick angle iron and 3/4” grade 8 bolts. Has worked perfect.
I just subscribed to keep a eye on you.
lol thanks!
What size is that shop that you built it looks like my dream shop oh and I love the truck
It’s a 48x80. 16’ side walls. Stay tuned, I’m going to a complete shop tour soon. I’ve had a lot of interest in the building since i started the channel.
Good luck bud
Thanks!
Not much of a dodge guy but damn I love that truck.
Thanks a lot! I’m truly a GM guy at heart, but this was exactly what i wanted when i put it all together. Thanks for the compliment!
how did you get started into welding and pipeline im in high school looking to start
Make sure you subscribe! I plan to do an entire video of my path to becoming a welder and things everyone could do better or not at all in their career.
Hey you need to pull pin. Dont you grease your hitch on the flat table part ?
I use a poly disk on the hitch. No need for grease then! Highly recommend!
This my 1st time on your channel, so you travel to all the pipelines and just stay where you work? Dang what a setup
Usually not. I’m able to stay within a couple hours of the house most of the time. Any further and i take the camper.
You travel with those regulators attached to your bottles?
Around the job site or from the house to the farm yes. Down the interstate or on the weekends, no.
I love your truck and it looks awesome with the camper on the back and what made you pick the colour white for the truck and I just subscribe to your channel
Thanks for the compliment!! I appreciate it! I picked white because in the summer nothing stays cooler than a white truck. I’ve had red, black grey and white trucks and by far the easiest to keep clean and cool was a white truck.
@@DownhillWelder300
I love it and I watch every video and liked every video too keep up the great work ❤
Thanks a lot! I appreciate that!
I've been welding for about 7 years now and working in a steel shop and fab shop and was wondering how to get started in the pipe welding industry?
I got my start working for a mechanical contractor welding uphill. It’s definitely a tough road and you almost always need to know somebody in the industry especially when work is slow.
Got that same 20yr old Adidas hoodie!
It’s a classic! lol
If you could name one must have item to have traveling in a camper what would it be?
It’s more than one item, but i would say a toolbox with an assortment of tools like screwdrivers, pilers, wire strippers, socket set and a utility knife.
That’s a lot of money into a truck, but it’s part of your work so it makes sense. How many miles do you expect to get out of it?
I agree. I’ll probably never have a truck this nice again. Had to do it once. Each rig I’ve owned had over 250,000 miles on it when i retired it. I hope to get closer to 300,000 to 350,000 on this one. Sitting at 161,000 currently.
What county are you from, I feel like I have seen this truck before? I’m on Grundy/Will Border
I’m from Clinton county, but i work all over the state. I don’t usually get that far north, but I’ve definitely been through there.
What part of North Dakota were you working in? Raised and live on the eastern half. Will be venturing out west and into Montana next week though to pick up a motorcycle.
We were in Fargo a couple years ago.
@@DownhillWelder300 I expected you to say out west. That’s cool, I’m an hour and a half from Fargo in the middle of nowhere. Go there quite often though.
Any room for another welder we’re your heading i can go test is it a bell and branch 12”
Thanks for your interest. We’re manned up right now though.
I put that shit on everything lol
It ends up on everything no matter what in my experience. 😂
Will you be recording on the job as well? hope to see those videos if so! Good luck bro, stay safe.
Yes, that’s the plan. I have to work out some details with what is allowed and what isn’t on the job site, but my intent is to cover everything that we do on the job!
I got a question I’m wanting to be a helper in the pipeline I have stick experience but I don’t believe enough to test out on my own do you have any tips on where to look or suggestions ?
I’ll have a video coming up that will cover all of this. I’ve had a lot of interest in this topic.
@@DownhillWelder300 thank you brother
4:06 Write the size on the hitch (inconspicuous place). Im always doing this on stuff I know I will be wrenching on again in the future.
That’s a good idea. I’ll be writing it on the hitch when i take it off. Thanks!!