This is an outstanding tutorial. I just started using this board in church and you have helped me tremendously with and easy to understand way of learning. Thanks so much
This is a very good tutorial video. He does a great job of making the explanations clear, concise and yet complete. I have trained audio teams for decades, and this makes the transition from old analog to digital much easier.
Just took on a role assisting with A/V Prod. Tech at my local church.I did not have a lot of experience with any of this stuff other than writing songs and having a passion for all music. This is extremely helpful. Very nicely put together.
Thank you for this video. I'm one of those guys making the switch from analog to digital. The parts about the EQ and Compressor are particularly helpful.
Some easy explanation for noobs (might even be overcomplicated? idk) Gain = sensitivity = ISO on your camera - Insufficient gain -> noise; Too much gain -> overexposure = clipping/peaking/overload/distortion Gate = bluescreen on your TV - Automatic shut-off when there's no signal coming in Comp = what your parents do when you're watching TV at home - Turns down the volume automatically when it's too loud EQ = Bass/midrange/treble adjustment ----EQ Gain: Add or remove & How much ----EQ Frequency: The exact pitch you want to manipulate ----EQ Q/Bandwidth: Wide range / Pinpoint control Fader = volume knob Mute = on/off switch for the corresponding channel / bus Solo = pick a channel and listen to it only Mix/Bus= a proportional combination of all the sound coming from different channels Pre-fader mix = a full independent mix, unaffected by the main mix Post-fader mix = a mix with "relative" volume control, 0dB = the same amount of sound as what's in the main mix Matrix = A mix of mixes
Thanks for an awesome video. Just got dumped running a new board for praise team. Your vid helped a lot. Can’t wait to get back to it and fix the mixes!
I have carefully read the instruction booklet of the Si Impact mixer but I don't understand if one thing is feasible. I would need for a hybrid event (in presence and on zoom) that will also go live streaming two scheduled mono releases: a) one that goes to the atem mini extreme via a Panasonic video camera equipped with an xlr port which must have all audio sources including the audio source with zoom b) one with all audio sources without the zoom audio. How can I do ?
Good day sir, I have a question, When I use an analogue mixer, the master fader level meter reaches almost at around -3db , in the yellow range, But since I started using the Si impact, it only reaches the 3rd fader - 24 dB from buttom
So I have mixes 15 & 16 going out to the FOH cabs or course. But I need a second set of stereo outs to go to the audio interface to stream. I've only been able to copy and paste to 13 & 14, but I need that mix to not have 2 on the input channels. How do yo0u do a second stereo out mix in a lower set of outputs between 9 and 14 of course, with less mics included?
Brother it's an amazing performance I do like it .... but I do have a question ; I don't know how to make the connection between the soundcraft mixer si impact to the protools ........ can you show me from the very beginning ? specially how can I connect my studio monitor during mixing Thanks for your kindness
Awesome video! Thank you! are you having to use a direct box to get audio from the output to your phone? I'm attempting to use an output for a Livestream to an iPad and not getting a signal, thinking I'm needing to use a direct box but haven't tried yet. Thank you
This is just a reupload of this video from 2016, and with no credit to the original, pretty scummy: ua-cam.com/video/5PhqRiINJsA/v-deo.html this is the original
Sorry man... but more than half of your video is spent "explaining" what is the Low Cut, Phantom Power or how the EQ and the Compressor/Gate works? Seriously now? Please stick to the point: a tutorial of the console itself! There are thousands of other "how to" videos regarding using EQs, compressors etc.
This is an outstanding tutorial. I just started using this board in church and you have helped me tremendously with and easy to understand way of learning. Thanks so much
This is a very good tutorial video. He does a great job of making the explanations clear, concise and yet complete. I have trained audio teams for decades, and this makes the transition from old analog to digital much easier.
Thank you for posting this tutorial on YT. It helped me begin to understand this audio mixer.
Just took on a role assisting with A/V Prod. Tech at my local church.I did not have a lot of experience with any of this stuff other than writing songs and having a passion for all music. This is extremely helpful. Very nicely put together.
Can you do video on recording to DAW ?
Thank you for this video. I'm one of those guys making the switch from analog to digital. The parts about the EQ and Compressor are particularly helpful.
Thank you so much, friend! Your video saved me a lot of headaches.
Thanks @Audiolivestudio, absolutely amazing explanations, better than all the entangled soundcraft tutorials 😅. New follower!
Thank you for a great tutorial. Of all of them I like yours the best. Helping tech in church. Appreciated! :)
Some easy explanation for noobs (might even be overcomplicated? idk)
Gain = sensitivity = ISO on your camera - Insufficient gain -> noise; Too much gain -> overexposure = clipping/peaking/overload/distortion
Gate = bluescreen on your TV - Automatic shut-off when there's no signal coming in
Comp = what your parents do when you're watching TV at home - Turns down the volume automatically when it's too loud
EQ = Bass/midrange/treble adjustment
----EQ Gain: Add or remove & How much
----EQ Frequency: The exact pitch you want to manipulate
----EQ Q/Bandwidth: Wide range / Pinpoint control
Fader = volume knob
Mute = on/off switch for the corresponding channel / bus
Solo = pick a channel and listen to it only
Mix/Bus= a proportional combination of all the sound coming from different channels
Pre-fader mix = a full independent mix, unaffected by the main mix
Post-fader mix = a mix with "relative" volume control, 0dB = the same amount of sound as what's in the main mix
Matrix = A mix of mixes
Thanks for an awesome video. Just got dumped running a new board for praise team. Your vid helped a lot. Can’t wait to get back to it and fix the mixes!
Perfect. Now how can I change from a pre fader to a pos fader or the other way around ?
Great video. Thanks for taking the time to make this.
Thank you sir for your packaged information
can u recorded a video showing the fx effects? I really need how to learn doing that for my church
Great video. Please give us an effects tutorial. Thanks
much appreciated, thankyou
Very good
Thank you for your help. Can you please give more information on saving shows, and then how to go back and revisit a certain show. Etc...
NICE
can you make more videos about the si impact thank you
is it possible to have a desk overviev, no the EQ or etc. tutorial?
May I know how to set up pedal as fx effect on this mixer ?
Event coming up tomorrow, hopefully this helps
thanks for the tutoral. really helpful
I have carefully read the instruction booklet of the Si Impact mixer but I don't understand if one thing is feasible. I would need for a hybrid event (in presence and on zoom) that will also go live streaming two scheduled mono releases:
a) one that goes to the atem mini extreme via a Panasonic video camera equipped with an xlr port which must have all audio sources including the audio source with zoom b) one with all audio sources without the zoom audio.
How can I do ?
Good day sir,
I have a question,
When I use an analogue mixer, the master fader level meter reaches almost at around -3db , in the yellow range,
But since I started using the Si impact, it only reaches the 3rd fader - 24 dB from buttom
Can we sidechain compress in SI Impact? For say Bass with the kick!
So I have mixes 15 & 16 going out to the FOH cabs or course. But I need a second set of stereo outs to go to the audio interface to stream. I've only been able to copy and paste to 13 & 14, but I need that mix to not have 2 on the input channels. How do yo0u do a second stereo out mix in a lower set of outputs between 9 and 14 of course, with less mics included?
Brother it's an amazing performance I do like it .... but I do have a question ; I don't know how to make the connection between the soundcraft mixer si impact to the protools ........ can you show me from the very beginning ? specially how can I connect my studio monitor during mixing Thanks for your kindness
Can I get a video on how to create a stereo sound for live streaming or in ear monitors
I want to learn
How would you change the auxes to stereo? And can you change any mono aux to a stereo?
Hello how many times can you patch an input to and output? Say i want to patch the guitar to a direct output but it also needs to be on the main LR
Sir how to change the channel meter diaplay colour.
Awesome video! Thank you! are you having to use a direct box to get audio from the output to your phone? I'm attempting to use an output for a Livestream to an iPad and not getting a signal, thinking I'm needing to use a direct box but haven't tried yet. Thank you
Do you know how to add effects on monitors bay channel?
Can you help me please.. how to connect my scarlet interface 2i2 to that soundcraf mixer.. where d I have to hook up? Help please
You don't need an audio interface for a mixer, just hook up your mic and guitar and just go
How to add delay reverb. Effects
How much price of this mixer.....?
No part 2? ):
New at this experience for me
How to use 🎧 soundcraft mixer
I may need to have the board life now than the video
Is this digital or analog signal?
Good 😂😂😂
한국어로 번역좀 해주세요ㅜ
fuck, same with compression
S'il vous plaît Mettez un tutorial en français Merci d'avance
Español xf
This is just a reupload of this video from 2016, and with no credit to the original, pretty scummy:
ua-cam.com/video/5PhqRiINJsA/v-deo.html this is the original
9ooooiooooooo9ioiioooiooo9
Great Video, terrible Console.
Sorry man... but more than half of your video is spent "explaining" what is the Low Cut, Phantom Power or how the EQ and the Compressor/Gate works? Seriously now?
Please stick to the point: a tutorial of the console itself! There are thousands of other "how to" videos regarding using EQs, compressors etc.
한국어로 번역좀 해주세요ㅜ