Thanks for the time i was waiting for some honest review, it's a shame the fc200 can't do edc16. For those that aren't used to MCU/EEPROM programmers, the speed of the reading is directly connected to the stability and quality of the interface, that's why it's a good test.
Pcmtuner software is only as good as the version it was cloned at, most of which are clones of original pcmflash v1.2.1, latest version is v1.2.7-1, so the new modules and bug fixes after v1.2.1 will not be present in pcmtuner
Hello, not bad but I don't recommend using clones unless you want to read a car or two. If you want to do this work professionally, buy an original product for example: Flex, Autotuner, Kess3
Hello. I made a presentation with models supported by FC-200. Don't be lazy and take a look at that review. I have no way of knowing each model because I don't use only FC-200.
I was looking into getting the PCM tuner … but am not 100% sure… I have the Kess stuff ( clone ) and to me it’s a bit out dated now… and to update it it’s a big mess on. But is the pcm tuner a updated version of the pcm master ? Thanks
@@YOYODiagnostic if I was to buy one is best to get the lastest update ? I am running the Kess v2 clone atm but so outdated on the software… if I was to buy the 2.90 software would I be able to pay you to help me install it thanks ? ( I can pay on PayPal or other ways ) thanks
@@filipbalaz2053 same here late I am slowing getting into the scene but don’t wanna spend grands … I wanna start of and build up… Kess is a bit out dated on the clones … that’s why am looking into the pcm tuner
@@BONKAZz Hello. This channel is created to help people that's why i don't get paid and i don't sell products. If I'm doing this for money, it's no help. I'm sorry but I don't provide services for money. I help as much as I can and when I can, but I didn't ask for anything, nor did I receive anything from anyone.
Great Video! How do you evaluate when comparing devices (clone): SM PRO2, FC200, PCM TUNER? Which type do you recommend? Thank and best regards for you!
Could you create a rework guide for pcmtuner hardware? I have replaced transistors but still have like you can't find sm2, I can't trust this tool and never used on real ecu.
Hi can you test FC-200 VAG immobiliser data process? I have seen a video saying that it doesn’t work. If you can clone immobiliser data from 1 ecu to another?
On the new cars you must read first the Eeprom, because of TPROT. After you write the modified Eeprom back , you will be able to read and write the Flash true OBD.
I definitely do not recommend the FC200. I haven't used it for a year. The device could not connect to the server for a long time. Didn't verify, Huge waste of time and money. Kess3 works perfectly. I will try to return the FC200.
Hello, if you mean FC200 I am as honest as possible and always say what I have to say. As many times as I have used it, it has not disappointed, and if it does, I will show you where. I have said in many UA-cam videos that this is not the programmer I use for customers' cars, this channel is based on helping people who have problems with these clones and cannot afford a professional programmer. If you are doing tuning as a business then it is mandatory to use quality products to avoid problems, for example I use Flex, but how many subscribers do you think can pay a little over 7000 euros to buy it. In all the videos I make, I say what I think, that doesn't mean I can be wrong, and that's why I appreciate it when you leave comments and exchange opinions. Share with us which Bosch ECU you had problems with FC200?
Hello, for someone to connect to you to install your respective programs means you have internet enabled. when you are going to do this and start the program with the programmer, it will look to update the internet. what do you think happens when a clone updates. I don't recommend reading those clone ECUs from Ktag. Kess is outdated anyway.
@@YOYODiagnostic and if you can tell us How many times have you used the fc200 and what type of calculator have you read and written with and thank you for your help
![Как работают Видеокарты? Исследуем архитектуру GPU [Branch Education на русском]](/img/n.gif)
Fc 200 looks very good and stable. I like that.
👍
Thanks for the time i was waiting for some honest review, it's a shame the fc200 can't do edc16. For those that aren't used to MCU/EEPROM programmers, the speed of the reading is directly connected to the stability and quality of the interface, that's why it's a good test.
Thanks for watching . 👍
Ciao e grazie per i tanti video e le spiegazioni in modo dettagliato, sei di grande aiuto.continua così e grazie ancora.
Thanks 👍
THANK YOU SIR YOU ARE THE MASTER I BEEN WATCHING THEVEDIOS
Thanks for watching and subscribe 😊
Always great explanation
👍
Another good vídeo!
Thank you!
Thanks for watching. 👍
the fc 200 works very well i hope they add some of the missing programs that will make it a top class tool..
Pcmtuner software is only as good as the version it was cloned at, most of which are clones of original pcmflash v1.2.1, latest version is v1.2.7-1, so the new modules and bug fixes after v1.2.1 will not be present in pcmtuner
👍
Great video 👍🏼
👍
Thanks for video, can you make video about new Chinese clon KT200 programmer please.
Thanks again
Hello.
That clone is far too expensive for what it can do, but any chinaware goes to half price in no time.
Your opinion to foxflash Read Bosch EDC 16 ?
Hello, good video, you know if fc 200 read ECU ME17.9.21 Hyundai, and it is necessary to pay annuity for the f C200
Hello,
I have a video with a review of the FC200. There you can see all the ECUs supported by this programmer.
Take a look!
Which one can cover more cars and good for workshop?
Hello.
The best one is Flex .
From this 2 the best covers is the Pcm tunner, but is a clone whit old PcmFlash software.
Pcmmaster is only $99 right now what should I get? Is a hptuner clone available aswell?
Good and honest video
👍
okay, cual es mejor pcmtuner or fc200 ???
Does PCM Tuner clone does not have same option as FC200 to change VIN ?
@@OFFGRIDHAMRADIO No , FC200 it's better
Hello, tell me, please, PSM tuner. Is it worth buying and how does it cope with the challenges of the German auto industry?
Hello,
not bad but I don't recommend using clones unless you want to read a car or two.
If you want to do this work professionally, buy an original product for example: Flex, Autotuner, Kess3
Please can fc-200
Program a used ECU for Mercedes c300 205?
Hello.
I made a presentation with models supported by FC-200.
Don't be lazy and take a look at that review. I have no way of knowing each model because I don't use only FC-200.
Good film .Regards Adam Poland
👍
I was looking into getting the PCM tuner … but am not 100% sure… I have the Kess stuff ( clone ) and to me it’s a bit out dated now… and to update it it’s a big mess on.
But is the pcm tuner a updated version of the pcm master ?
Thanks
Hello.
Pcm Tuner is a clone of Scanmatik.
hello Robo,
i want to go also to buy this pcm tuner, cause its not my living atm i dont want to go FC200 with subscription fees...
@@YOYODiagnostic if I was to buy one is best to get the lastest update ? I am running the Kess v2 clone atm but so outdated on the software… if I was to buy the 2.90 software would I be able to pay you to help me install it thanks ? ( I can pay on PayPal or other ways ) thanks
@@filipbalaz2053 same here late I am slowing getting into the scene but don’t wanna spend grands … I wanna start of and build up…
Kess is a bit out dated on the clones … that’s why am looking into the pcm tuner
@@BONKAZz
Hello.
This channel is created to help people that's why i don't get paid and i don't sell products. If I'm doing this for money, it's no help.
I'm sorry but I don't provide services for money. I help as much as I can and when I can, but I didn't ask for anything, nor did I receive anything from anyone.
Great Video! How do you evaluate when comparing devices (clone): SM PRO2, FC200, PCM TUNER? Which type do you recommend?
Thank and best regards for you!
Hello.
Scanmatik Original ist the best.
FC-200 is good but only for Bosch ECU .
Thanks for watching.
@@YOYODiagnostic hi
well so good @@YOYODiagnostic
Is there a difference between PCMTUNER programmer and imitation or emulator PCMTUNER
I don't know.
Hi bro! Does PCM tuner supports bmw f series and all the engines of the bmw f series?
Hello. Yes all E and F Series are supported.
@@YOYODiagnostic via obd or bench?
@@krasimirpetrov334
Bench
Hi..nice to meet you..can you suggest programmer for beginner tuning.. especially Mercedes model..thanks
Hello.
What ECU models do you want to read on trucks?
Not trucks but Mercedes benz model car such as Bosch,Siemens, Continental
@@haziqhaiqal8453
A cheap one is FC-200.
Could you create a rework guide for pcmtuner hardware? I have replaced transistors but still have like you can't find sm2, I can't trust this tool and never used on real ecu.
Hello.
I have to take my time and deal with it because you can't use it with confidence. 👍
Hi, pcm tuner is better than clone kess ?
Hello.
The 2 clones you mentioned work differently.
Kess is ok for edc15+ edc16 and the other clone from PCM for edc17
Hi can you test FC-200 VAG immobiliser data process? I have seen a video saying that it doesn’t work. If you can clone immobiliser data from 1 ecu to another?
Hello.
I will make a video related to clone procedure.
Thank you, it would be good to see it being done. You are very professional
@@justinchen6018 👍
Cand you read 2018 gp1800 ecu
Hello. No you can not.
what is the correct order of writing back to ecu, eprom first or flash file first??
On the new cars you must read first the Eeprom, because of TPROT. After you write the modified Eeprom back , you will be able to read and write the Flash true OBD.
you doin a very good job but this tool hang up too much....
👍
I definitely do not recommend the FC200. I haven't used it for a year. The device could not connect to the server for a long time. Didn't verify, Huge waste of time and money. Kess3 works perfectly. I will try to return the FC200.
Thanks for info. 👍
Kess3 is shit I and in the process to take them to court Because is not letting read the ecu I had fash in the past and they don't want to fix it.
I am using it to be honest it’s very UNSTABLE tool 😢
Hello,
if you mean FC200 I am as honest as possible and always say what I have to say. As many times as I have used it, it has not disappointed, and if it does, I will show you where. I have said in many UA-cam videos that this is not the programmer I use for customers' cars, this channel is based on helping people who have problems with these clones and cannot afford a professional programmer. If you are doing tuning as a business then it is mandatory to use quality products to avoid problems, for example I use Flex, but how many subscribers do you think can pay a little over 7000 euros to buy it. In all the videos I make, I say what I think, that doesn't mean I can be wrong, and that's why I appreciate it when you leave comments and exchange opinions.
Share with us which Bosch ECU you had problems with FC200?
hello group can anyone help me through remote assistance to install k-tag & kess software. I have two ecus to program EDC17CP14 and ST102F75. GREETING
Hello,
for someone to connect to you to install your respective programs means you have internet enabled. when you are going to do this and start the program with the programmer, it will look to update the internet. what do you think happens when a clone updates. I don't recommend reading those clone ECUs from Ktag. Kess is outdated anyway.
@@YOYODiagnostic tank for you responsed
keep in mind fc200 is also an clone!!!!!!!!!!!!!!!!!!
Hello.
I don't really believe how long software updates online, and firmware, but in this world everything is possible. 👍
Fc200 clone of what ???
@@mrt-ee1zn flex, but only some ecu types. Kt200 can do much more for less money
Hi
👋
I USE IT(FC200) IN EDC17C46 VAG TO DO EGR OFF READ AND WRITE SUCCESSFULLY AND CHEKSUM CORRCTION SUCCESS ALL OK Hamdollillah
Thanks for info!
@@YOYODiagnostic you welcome if you can do more video on FC200.
@@YOYODiagnostic and if you can tell us How many times have you used the fc200 and what type of calculator have you read and written with and thank you for your help