FC-200 ECU Programmer review.(Tuning - Remap). no Reason to use a Clone anymore !!!
Вставка
- Опубліковано 6 жов 2024
- At the moment it is the most reasonable Programmer for the New Generation ECU. It should be noted that it cannot work on older generation ECUs such as edc15 or edc16.
Don't ask stupid questions like: it can replace a Programmer like Flex or Autotuner, because it doesn't support the old generation ECU, so it won't be able to, but the Price is not comparable either.
For those who want one of the CGDI company programmers, here are the links
FC200
www.cgdishop.c...
FC200 + Adapters
www.cgdishop.c...
CG100x
www.cgdishop.c...
Cgpro
www.cgdishop.c...
CG100pro
www.cgdishop.c...
Excellent video. I had some questions but you already answered them all in the video.
Thanks 👍
your videos are from the best on youtube regarding flashers and programmers, did you tested Fox Flasher, looks like it is well covering ecus and most reliable regardin clones. Thanks.
I decided that the discount link should be received by e-mail after proving that you are a Subscriber, because more than half of the people I help on this channel do not even have the common sense to subscribe. ( yoyo.pc86@gmail.com )
I was probably more respected if I asked you for money (donations) in exchange for the free services I provided for you.
Hello, i did send you email, an i'm a subscriber of your channel. You send me the link, but it doesn't seem to be the discount link!
@@autodiag7044
Discount is of course because I tested it personally.
You also wrote to me by e-mail and I answered you there too, you don't have to complain everywhere just to have activity. By your name it looks like you're a salesman and you're upset about something but I don't have time for nonsense
YOU ARE AMAZING KEEP GOING
Thanks 👍
Hi, thanks for the great review!
is it possible to perform “Immo off” for Audi / Vw cars with the FC-200?
Hello ,
this programmer only reads and writes the ECU. What you want to change in Dump is a completely different operation.
yoyo bro... thanks a ton...🥰🤗
👍
Most of the checksum Will fail i have been testing this tool yes lots of manual etc but the most importante is result and it as fail no good as tunning tool
Hello.
I will try to read and write as many ecu as possible. Thanks for info. 👍
Hello thanks for you video! can you fix the checksum of ecu mg1cs011 vag group?
see more edc 17 than the edc 16 on the fc200 can do
Hi. you can do the Simos PCR2.1 test
Wich Test ?
Have u tested to write any ECU? Can this one correct cks and is there anything new on EDC16? Can this be used without sub after 1st year?
Bunch of questions but I'm a real subscriber haha 🎉 thanks!
Boa noite programador formulaflash oque vc acha e um bom programador obrigado
This is a Clone. It's too expensive
Want to def scr off in md 1c ecu with fc 200 not working
Which one do you recommend? I’m looking for a good tool like this FC200 or PCMTUNER, but which one is better? I only do BMW’s
Hello.
If you need for BMW only , FC200.
If you need for another cars to , PCM Flash (Original )
Hello do you try it on EDC17C46 VAG ?
DCM7.1A __ DCM7.1B
Hello a question do you have necessary to pay year by year or just if you want updates? And will it stop working?
Hello.
Must be paid each year but is a reasonable amount.
hi mate I really like your video
I'm get in the dpf and adblue removal and want start ECU ecu tuning I have 1 experience as auto locksmith but now want to buy tool for other job
what do you think of kt200 and foxflash
thanks for your time
Hello,
these 2 clones are identical but with different names. They are the evolution of the Galletto clone.
What is worth noting, the fact that with these programmers you can update the software and firmware. It reached half price in 3 months.
Still waiting because it was worth buying!
@@YOYODiagnostic thanks for replying
one thing what would like to is the are this
tool just readers and writers or do they do the hole for example I want to remove the
adblue and Nox senser or do BHP upgrade can the tools do it by pushing button
of do I read file then send it to someone
or buy files then write it back
thanks for your reply
@@omerward9261
of course you can do this and it is always advisable to work with the original dump that comes from your car. You can send it and someone will operate it and do the checksum correction and then you can write it back. This way you have few risks and low costs.
Hi Yoyo, you know the Foxflash ? Its good?
Hello,
yes but I don't advise you to buy it yet. When it appeared it had a price of 1000 euros, after 4 months it is 550 euros. This programmer is the evolution of the Galletto clone.
@@YOYODiagnostic and the kt200? Um looking for something for start. something that has no annuity and that has an update.
@@hpengine4280
It is the same clone produced under a different name. Whichever one you buy is the same as the other, buy a variant that works offline.
sorry for the stupid question, but with this programmer i can write map with dpf off or egr off, stage 1 or that kind of thing??
Any programmer allows you to write what you want, as long as it connects to the ECU and is able to communicate with that ECU. If he didn't do this job, I wouldn't have a video with him.
If you were a little more active you noticed that I have a video with him when he writes the memory of an ECU and this video answered this question.
@@YOYODiagnostic I am new to your channel, I subscribed, thanks for answering my question, I was asking because in a forum there was a discussion of the use of this programmer, they said that they eliminated the fap, egr, dtc off and another person told him that the programmer did not work For that, that's why I had the doubt.
Moin
Das AT 200 hatte Probleme mit Immo 5 haben die das jetzt behoben mit fc 200 oder funktioniert das immer noch nicht und danke für deine Mühe
Hallo.
Bisher sind wir damit auf keine Probleme gestoßen, aber loben wir es nicht zu sehr.
WHAT VERSION OF WINDOW THE PROGRAM SUPORT?
All
Hello. I made an EDC17C60 and the car got the code P3028 and it stopped working I had to write the source file. Do you have any suggestions for this problem?
It was to do ADBLUE off.
Thanks
Hello .
Wich programmer do you used ? It is a clone like PCM China or KTM bench ? Tell me more about this if you what helps.
You must disable TPROT on new file
@@espaltronix Where can I find the program?thanks
only Bosch ECUs .
most are Bosch but it also has Delphi or Continental
Es BEST tool?
Not necessarily !
Is a good programmer so far let's see from now on.
We'll put it to work and see what its pluses and minuses are
Can you explain me what is mean pflash dflash? And how to use the tool for example i want to take full backup with flash and after when i make the mods to write just the flash it is possible with this tool? Can you explain me because im not understanding this tool because for example flex you have to take full backup and after you can write just the flash file
Hello,
DFlash = Eeprom
Pflash = Flash
For tuning you need only Pflash .
@@YOYODiagnostic OK if i take PFlash and DFlash and after i have to write only the Pflash or Pflash and the Dflash?
@@krasimirpetrov334
they can be read separately and written separately. I read both, just because I want to have a full backup in case I need it.
But note that Dflash can only be written back to Dflash.
@@YOYODiagnostic Yes i want to read full backup and after i make mod file i have to write just the flash right? Or I have to write the flash and the eeprom?
good device but it want 250 dollar per year .1 year free
Hello.
Correct but you have to keep in mind that the correction is made with their help, so if you write 5-6 ecu per year this is the money you pay them to do the correction for you and you have an update on this money.
i think is a fair price, damaging a ecu with a clone might be more expensive
This is basically TCXXXX over canbus reader for 2x PCM tuner cost.
PCMTUNER is a clone, that means they stole from other people's work. (PCM FLASH)
do you recommend this tool in general?
Hello.
For Bosch ecu is amazing and very cheap for an original product, which really does online software and Firmware update.
The downside is that on other ecu brands it is very poorly developed.