DEEPSEA MODULE defective, not communicating, memory corrupt, no display, how to fix it? benzblogs
Вставка
- Опубліковано 10 жов 2024
- in this content, I explain to you how to recover or fix the defective module, how to work it back as a normal working module and here I teach you how to flash and update the module back to the normal condition.
I had commented about my defective dse5110 .
You responded to my comment but found later that the modules I was buying wasn't at all authentic Deep Sea Modules.
These were cheap Chinese manufactured knock offs and made to look like Deep Sea Electronics modules. They even use DSE logos and claim to be Deep Sea Modules.
That's exactly why these cheap imitations won't at all hold up and stay working correctly.
With this, I contacted DeepSeaElectronics in Chicago Illinois and placed an order for the Deep Sea Electronics DSE 7210 MKII with Heated Display.
Sad this is the problem that its good to buy authentic
Thanks for the knowledge share, how this flashing process works and to removed Membre courrpt or Comm faill. I am encountering this problem now
Shukran/ thank you
@@benzblogsVlogs Sir I am awaiting your reply
Thanks my brother..watching from the Solomon islands...
Welcome sir have a bless day
@@benzblogsVlogs my brother.. I've try to solve that problem memory corrupt..but when update using update firmware it stop bcos there is a password on the deep-sea electronic control board..what is the next step?
@@DaveTopi-jb9ss its should no password make sure that previouse config did not put any password from the module coz should not be asking pasword during update
@@benzblogsVlogs my brother good evening...we have put password on scada>maintenance>module lock.. someone try to change the setting..somehow memory corrupt..cfg1 eng1 and etc appears on screen..therefore we use update firmware but on process it stops updating at 71 %
@@DaveTopi-jb9ss thin try to use lower version
My module is called DSE7320 V7.0. The problem is "MEMORY CORRUPT REFER TO MANUAL", When I try to update firmaware to the lasted version 14.0 the dse config show me" INCOMPATIBLE HARDWARE
UNIT IS MODEL CODE 7320, MODEL VARIANT 0, HARDWARE VARIANT 1.
FIRMAWARE FILEIS MODEL VARIANT 0, HARDWARE VARIANT 2."
PLEASE HELP ME Mr, thank you.
Thin try yo downgrade there is no issue
Thanks Mr,
sorry, but i dont understand your explanation, i try downgrade in config suite or in dse site?
please helpe@@benzblogsVlogs
@@VidalGonga-r3x due to not allow the company rules
@@VidalGonga-r3x downgrade the firmwarevrrsion
Hi can iyou give me the link for flashing please 🙏🏻 my modul all so thesame (memory corrupt)
Sir no need what ever the module your doing just update it at higher version of same type of the module go the the latop open deepsea in the top you cleck the update firmware and follow the instruction geven to by the deepsea app while doing the update ok
Asap me so i can give you instruction how to do it
@@benzblogsVlogs iam still trying to update firmware
And still waiting for begin
How did you do for update firmware
Send me the picture module at the back soni can see the model so i can send you the flash file send me your email in benzblogs measanger thank
Thanks for your explanation. Best wishes ❤❤❤
Bless you sir
@@benzblogsVlogs Thank you sir 😍😍
Chrck mo po sa video ko meron doon
it's always good to have both options on the table concerning panel rectification. can i please get to know about the flashing procedure as well please?
Open the dse config thin go update firmware and di the conrrect model what you wabt to upgrade done
Yes
Go to your app thin connext module to the latop and find the upfate firmware after that onece you click its show what type of module and version u want juat follw instruction deepsea give
Hi thanks for this educational video, how do I get hold of that link you mention for the flash file?
No need flash just update firmware
Thank you for the teeching video. I have DSE 6110 how i can flas the system could you please share me the link and type of doing this to fix it
No need for the link just connect your loptop and thin update firmware after that it back to normal
Help with the link for the flashing. And even while working on the Memory Corrupt, I didn't see what you operated on the laptop, the camera is only showing the display board of the DSE.
Ok even without flashing i found out just go in the app open deepsea thin go to click the firmware update thin select the model ang version of your module thin write it ok thin back to normal
Thank you for the help however there's still more. When the panel doesn't display and just the LCD backlight showing but still works with the buttons. What are my to do. Do I need any flash file and how do I get it to return to display.
@@benzblogsVlogs i tried to update my deep sea 6110 MKII controller but the display is still green
@@ayazshah8453 of this green means defective already try to open it check the rebon inside
@@benzblogsVlogs along with green screen warning light is blinking
Kapatid i have a Cummins qst 30 with gcs and dse 7310. It gives ecu shutdown after crank. The ecu fault flash code is 1211.i swapped the mpu it would crank for a bit longer but then again ecu shutdown code again
Thank for all you do here. i have a DSE8610MKII that is displaying MSC data Error hence it is not communicating with the other DSE8610MKII is the synchronizing panel. how do i solve this problem thanks
Check how many pcs you synch thin end to end should have 120 ohms thin double check the connection if there is wrong or ither reversly connected or cut thin if same msc fail ahm check the multiset in the config ither wrong program
Thank you sir the module reading is different from the measured output but is it possible to adjust the module with DSE system?
Not posible we can calibrate the reading or dse module unlike compap you can calebrate
Hello friend, thank you very much for your video, I'm following you from Angola and I have a deap sea 6110 module that suddenly its screen had first turned to writing and now it turned black. Can you give me a tip on how to resolve this? I am grateful to you from now on.
If only disply is gone and its working meaning ither lcd is problem or just adjuat the contrast of your lcd now if still same thin open check the ribbon of it clean it and put it back
@@benzblogsVlogs thank you so much
@benzblogs after flashing our module and all lamps are red instead of making configuation manually as you did in this video; can we also copy directly to another module wich working and paste on our modeule directly
You have to do it manually to other
Why its red light all meaning no program at ll need to do it again
merci beaucoup pour ton aide cela a fonctionné pour moi !
Yes sir do this check your battery if good condation check the fuel thin try to bleed to remove the air in the fuel galery agter that start again use manual pump at same time crank it
Por pabor english pls.
@@benzblogsVlogs lol that was french and it’s por favor
Sir kailangan ba talaga ng flashfile?
I have a similar problem to the 7410 MKII model. I have updated the program and before the download is completed, the update stopped and a note appeared on the model’s screen. memory corruption refer to manual . What is the solution please?
What firmware update you did just put the latest updat on it like if version 1 update it v1.1 or 2 like that in order to work make sure update is propperly done
Good job sir
Thank you sir
I have a same issue a green screen no display. where can i find the flash file for the DSE 8610MK2 . Thanks for sharing your video. appreciated.
Bless u sir
Sir, anong compatible laptop para maka download ng software, windows 8/10, 32/64 bit? tsaka po anong gamit nyo na cable to connect from laptop to the unit (DSE 8610)?
Usb windows 10
Go yo website deepsea make account so you give permation to donload the app
Nice 👍
Hi I'm Boakye from Ghana please my module screen displays memory corruption and in this video you reset the same memory corruption but you didn't show the procedure so please make a video to teach us step by step.thanks.
Just update firmware
Hi, Bro.. how are you ? Hope you are doing well.
I am SALIM from Singapore.
I have watched your video.
I have a device model 7320 which is the same issue as mentioned in your this video.
So please advise me to solved the issue and share me to link and flash file.
Thank you 🙏
Sir for now have update deepsea but try it if still wprking try to update the firmware if your module to higher version that it
Thank you I like ur training, may I follow you
Thank you sir have a bless day
good job pare.
Salamat pre
Sir Good day..now ko lang nakita blog mo nagsubscribed na ako turuan mo nmn ako paano mag programm
No prob sir
thanks for your teachng, may i have the link of the model 7320 falsh plus file and a text format tutorial ? thanks very much.
Sir no need now not mesesary juat open deepsea config connect the defective module find the update firm ware and follow the instruction there that it
hello, good night, I have a deep sea 7320 which presents the common ac fault, and even if I flash it, the fault continues to appear. I hope you have a good day and thank you very much for your help.
Sir do you have picture on that so i can really identify
@@benzblogsVlogs yes, where can i send it?
Sir, good morning... How to fix memory corruption on dse 8610 MKII. Thanks and more power...
Just update frimware after that if you do correctly prblem sovlve
nagka-conduct ba kau sir ng training regarding DSE and generators?
But sa company lang sir bawal po sa ibang company rules is rules po
hi sir, thanks for the good work. please send me the flash file to flash a blank screen module. thanks again. please keep the good work up.
Sir no need flash file for that make sure led button is light thin try to update firmware version only
@@benzblogsVlogs ok sir, thanks
TKS BRO. DEEPSEA 7210 "MEMORY CORRUPTION REFER TO MANUAL" . HOW TO FIX IT
Sinple bro follow the vedio or follow what i say here
Open deepsea config click tools ,update firmware thin follow wizard quide through firmware update thin update it in the new update version ok
@@benzblogsVlogs tks bro so much. from Viet Nam
Welcome bro bless you keep safe
hi there, can you please help me out with the link that re- programs those panels and how it can be done?
thanks
Just what modulel of the module so we can identify
thanks for this info, but how to get the flash link for deepsea 7320 ?
Now as new update flash link is not nesesary just update firmware thin kalas afyer that config back and its work juat follow the process
We are encountering an error with DeepSea Module 7320, which has been unused and is displaying a calling application error. I have attached a snapshot of the error for your reference.
Check the config something wrong
Sir goodday pwede magtanong if what part number of engine oil you normaly use from generator fgwilson thank you much
I give you the ths spic tomorrow
Sir tanong ko lng po Meron po ba training or seminar sa pag set up or program Ng DSE controller my account na po Ako Thank you
Deepsea mismo sir
Wala naman seminar sir download molang
Hello, I have a 7320 module which working fine but no display. What should i do to fix that. Will Fireware update fix the issue?
Just open check the rebon remove clean it and insirt back kalas done
Nice work sir, please how do I get the flashing link?
Sir no need flash link now you need to do is only update the version to higher that is
Hi brother
Can show me the link for reprograming the deep sea module which dont have any display light and indicator light on. Genset at rest mode.
Just open and check the lcd ither defective or rebon is dirts need to clean
My module is called DSE6120 MKIII. The problem is that the generator output is measuring 234 volts Phase to Neutral, but the module is reading 275 volts Phase to Neutral, causing the generator to shut down, what could be the problem?
Give datail of your voltage output and this is single phase or 3phase okay
have a similar issue, my module screen went blank... back ground light is ON but nothing displayed. no lights on the start or Man.
Check first open the module check the LCD if the rebon is properly installed or clean it
I also have new 7320 that stops communicating, doesn't display light at all how do i fix it pls. Thank you sir
Do one thing connect paower supply after that connect the usb to the latop check if any communication betwen your deepsea and the laptop if there is thin update the firmware if no thin meaning to say that your module if fully deffective or not posible to repair
My dse7320 also has the problem of "memory corruption". Can you tell me the specific operation in detail? I am an idiot😢😢😢
Update firmware
Can you assist me with a dse 7420 flash file, am having a similar issue but mine is coming on just that the display isn't showing anything
No need flash file just update firmware and follow inatruction thin all is good
Yung DSE 8610 MKII ng cummins genset namin, pag start mo nag crank sya at umaandar, ang problema wala syang display na voltage, speed, frequency as in no display ng parameters. Ano kaya problema??
Check mo sir gamit multi meter para sure kong may volatge talaga after kong meron check mo sa likod ng module yung wire na V1 kong may pomasok na voltage okay po
@@benzblogsVlogs wala sya kahit ano, hindi lang po voltage wala, pati rpm, frequency wala din
Ang nasukat ko 2-3V lang po. Hindi po kaya loss of excitation?? Paano po mag excite??
Hello sir..
How to fix communication failure only when we want to write configuration to module DSE 7420 MK II? But the application success to read the configuration from the module. Thx..
Check your usb if connected prperly snd if same update your sofetware
Hi Benz, I have the same problem on a Deep Sea 335. the error message displayed: ''Memory corruption Refer to manual''.
can you help me with the restore procedure or the link for the Flash program.
No need flash juat update the firmware version
Or if you have a config file dame version of the module write it done
Sir benz, magandang araw sa iyo, i have a deep sea module 6020 mkii the problem is i can't edit any parameter in this module and all indicator lights are lit, is there any solution on this?...
Just update firmware that the solution
Copy first the config before updating the firmware
@@benzblogsVlogs Sir, lastly if i have 2 DG and if i bond their both neutral while running, is there anything will happen?
sir san makabili ng pra flashing at software pra sa DSE..meron ako dalawa na generator ung display nya mawawala minsan meron at minsan baligtad ung graphics pero meron siya ilaw at gumagana din sa manual at auto start..ung display lang ang problema..anu kaya issue sir. salamat at more power.
Sir buksan mo lang yan koonting linis mo lang sa rebon nya ik nayan alikabok lang
I tried to firmware update my corrupted memory module DSE7320 but it istel not working. Can you please help me?
Make sure your correct firmware and updated your sofeware
Hi, does flashing mean firmware update?
Its little defferent but also in firmware you can do and solve the problem
Good day sir
Pls can I reset a red alarm on the module and amber indicator
No you need to rextify first before your can reset
hello i have a problem with my DSE 6020 MKII which can not come on when i put the power inside but when the computer is connected through the DSE software it can come on . what could be the cause of that?
Just update the firmware to make it easy or if replace the lcd
No display po Sir.. Kailangan po ba talaga ng flushing, then saan po pwede maka kuha? Thank you.
Sir dependi po
Di lahat
Nababasa naman po sa Confi.Suite Sir, nag update firmware na din po. Wala pa din display.
Baka pwede po ako makahinge idea for flushing Sir, thank you po in advance😊
Kong mgflush k sir open mo lng deepsea config tapos sa taas hanapin mo lng firmware update po yun lng thn follow mo lng instruction doon
Good sir pide po ba mag tanon tunkol sa deepsea elictronics genset cat 3516
Lumabas fult
Memory curruption refer to maual
AC comms fail
Sana masagot nio po tanon ko
No prob just connect usb open you deepsea app thin do the update version thin follow the instruction hive to u byvthe laptop or follow my yt channel
Just update the latest version of the module after complet done!
Hi sir..can you pls help me with the link for the flashing and how i can do the reprograming pls. Thanks
No need the link just update the firmware after that it will be back to normal
Alright..thank you sir, i appreciate@@benzblogsVlogs
Hi Benz…we having an issue with our gen module regarding corrupted memory…I’d appreciate if you could assist with the software download link…thanks
It’s for dse 7310
No need the link just update the firm ware link now is not working ornly update firmware ok
hi there, i tried updating firm ware but the system stiull fails to get back to normal. cam you please teach me how to flash the deep sea panel?
What is the problem with your module pls
I love your job , can I Have get the flash link
Now new update deepsea no more flash just update firmware or re write it back that it
@@benzblogsVlogs Hello bro, I have a found a problem my my deep sea controller , I wanted to copie a old version of deep sea module 6320 v.2.3 to another more récente version 2.7 , it was impossible cause the version was old than new module .
Then, I decided update firmware the version of my DSE module 2.3 to 2.7 , but I seen that version 2.7 was not what I wanted ?
How can I put my module back to his old version ???
I really need your help please?
I had a DSE7310 MKII, memory corrupt , AC comms fail, and l upgrade firmware ver. 2.2 to 4.1 , but no change same problem.
What you mean you update its finish firmware update what you its same
Ac comm fail is the problem check your wiring fuses and etc use multi meter to check
Saan Po makakabili nang Port para ma connect sa laptop ang module sir? At anong klase Po?
Sir sa printer connector lang yan sir usb to prenter same lang sya
I am having the same issue DSE memory corrupt, how can i get it solved?
Did you check the video? Follow update firmware and that it
Boss our controller shows *memory corrupt*but this was done due to the dead of CMOS battery I replaced the battery but the problem is still there,so how can I rectify this problem
You have to update firmware
Sir i had 6010 MPU V.1.
5. The timer symbol is always and i cant start the genset.even i lower down all timer setting but its always on. Whats the problem
Is this new install module or you did the config
New
Display backlight not switching on.. but info shows on display in black and white..
Just adjuct the contrast using the laptop
sir good day po. meron akong 8610mkii not communicating after replace new dse ok na sync. sir puwed ko bng irepair ung luma ano ussual na issues .salamat po
Usual issiuse yung mga lumang module sometime board na ang sira or dependi kong ano yung nagiging failure nya
@@benzblogsVlogs sir thank you. Mostly ayaw magcommunicate yung avr resulting sync failure. Sa components ano usual na pinapalitan to revive the controller para po magamit ulit instead of buying new sir. Salamat po
What avr your are using so we can check if i know i can guide you
Sir supply ng deep sea ang tinanggal mo battery suppl
Module supply lang sir tapos ibalik mo lam din outomatic maguldate na sya
sir, am trying to flush a deepsea panel 7320MKII. You said you would send us a link to help us during this process but it never comes. can you please help us out with that link for flushing?
I seed no need link you do it without it coz im in vaction that why i font have my computer
During the proces open deepsea connect usb to the latop and deepsea put supply for deepsea thin in the aplication click in the top firmware update thin look my yt how to do it
sir wala bang manual configuration yan na d na kailangan ng pc or laptop wala kasi display ung controller thanks
May manual sir pero limited acces lang hindi sya full
paanu po sir
Just just press the stop and check button and thin arrow side you now see the configuration
nawala po ung display sir pero sa stop manual auto ang on
may ilaw po sa display wala naka display blangko lng po salamat sir sana matulungan nio po ako ty
d po makita configuration kasi blangko po
sir pano po yong memory corrupt Dispaly, then mamatay napo yong genset? DSE 8610 MKII po model
Ganito sir since wala kng flash file pwedi parin gawin to ponta ka sa update version halimbawa 8610 update mo sya ng latest matic na yun marecover nya at mag ok
@@benzblogsVlogs Pano yon sir maka punta sa updates nya?
Open mo yung latop open mo yun deepsea ponta ka sa confuguaration mkikita tools thin update firmware para mabuksan mo yung version
Where is the link on how to fix the corrupted memory please?
No need the link just follow update the firmware that it just make sure that you softeware is updated
I have problem with dse7310 control panel
BRUNO GENERATOR
Display lights up but no words
Buttons work e.g engine starts bit then it will cut out after 5 seconds. Your video shows buttons not working. Can I re program this?
If no display sir check the rebon inside of the module or ither disply is defective already
@benzblogsVlogs ribbon looks good, do you mean continuity test? I plug them out and in again in case it was a bad contact but made no difference.
@@jon44sweeney meaning lcd is the problem with this module
Hello, Can you please give me the link on how to communicate with dse , i have memory corruption . Thanks
Just simple open your deepsea connect to your latop open config in the top you can see update firmware thin follow the instruction select the latest version done
sir need po ba ng internet while updating the firmware ?
di nman kahit wala basta may app klng ng deepsea
Have a power zone model number 7741 need programming to relearn any help?
What you mean sir what program
@@benzblogsVlogs the controller needs to be reflashed.
@@gabrieljacquez4058 the problem is if i give u a config my be it not match to your module version
Sir I have one deep sea controlar 7510 problem bms alarm waht happened pliz tell me
Bms mean its not communicating send me pic
hola buenos dias tengo ese problema con mi modulo ya descargue el sofware pero no me deja hacer nada
Hello sir what the problem of your module by the way charginging failure?
How , to do with the dse 7320. When it gives Ac Comms fail. Can you share me the link on how to fix it and the flashing file.
Thanks
Ac comm fail?
Waht module you are using
If that is the alarm meaning check the fuses and the voltage
I have a DSE 7320 Module that display does not show anything. I have updated the firmware but the issue still, how can I fix it? Thank you in advance.
You can try to open it there is one rebon there try to remove and insert back due to vibration and dust its happen sometimes
@@benzblogsVlogs Thank you so much, I will check that and I'll let you know if it fixed.
Welcome sir
It fixed! Thank you so much for your advice.
I have a 8610mkii with memory corruption how do I repair this
Simple just update firmware no need flash file
My 6110 module have generator locked out how can IFix it
First check the alarm that causes lock out
I'm having this same issue on a deal sea 7320, can I have the link please
No need the link justupdate firmware and good to go
Hello Sir please i need your help I have dse7310 MTU Generator my display is showing memory corruption refer to manual and AC comms failed. Please what can I do. Many thanks in advance
Just update firmware version but im
Not sure now if still working that process coz deepsea update the config software
Thank you very much Sir i do appreciate
hi sir it is applicable for DSE 7420MKll?
Yes pi any of the deepsea
hi sir can you give me the link pls...
Sir just go ditectly to update firmware and follow the instruction given to you in your laptop
i only have dDSE confoguration suite how can i fixe the issue ?
To make it easy just update the firmware of that module thin follow the instruction from the loptop
I've got the same configuration suite, when you figured it out let me know.
Thanks
7320 new module does not communicate with my laptop usb says doesn't recognized?please help me
Just update the sofeware make it updated
Hi I can't update firmware my 7320 module doesn't appear on deep sea configuration software
Sir Anong software gamit pang configure
DSE CONFIGURAT
Sir. Pano ba tanggalin ang memory corruption refer to manual hindi pinakita sa vlog mo kong pano pinakita lang ang DSE pero ang pag set hindi......
Ok ganito po sir simple lang po if you have latop and dse config thin open the app connect usb to your modulw and latop now go to update firmware make sure that your model of your module and follow what instruction gove bue deepsea during process okay
facebook.com/groups/1581429425388674/chats/6246955898653285
Sir gud day ask ko lng nawalan Ng function Yung push button Ng dse 7220 nung una may ilaw pa SA push button tapos bigla nalang nawalan Ng ilaw at ayaw na mag command please response salamat po
Meaning ither hard ware of software issue nayan sire try mo save ang program tapos try monupdate firmware pag ganon parin palit kana ng module
@@benzblogsVlogs wala Kasi display to sir ung LCD Nia pero nag pa function Naman push button Nia nung una pero nung 5 times na namin ulit I test run wala nag function push button Nia Ty sir
Baka my moisture yan sa loob sir chrck monalang
hlow . poh sir . baguhan lang po . may na in counter po ako nang ganito nga problem . . pwede po bah . maka hingi nang advice sayo. followers mo po ako . . tga Philippines po ako .
Walang problima sir pa clarify lang kong anong nahing problima
Pag currupted update firmware mo lang sundin mo lamg yung sinabi ng computer
dse7220 po yung model kuya benz . baka mka hingi ako nang tulong wlang dsplay pero ma manual sya ma start.
kuya benz. . yung about sa re flashing pano yun .
cge kuya. benz salamat po . . followers mo na ako ngayun. may project kase kami sa ngcp genset pms kuya benz dito sa visayas .
Thanks please how you can help to get the flashing link
No need flash just update firmware finish
good day sir.. my dse 6110 mkii auto start showing memory corruption refer to manual..pls how du i fix with my pc
Just do update firmware and follow instruction while updating okay
Hallo sir im from Botswana
Im having a module 7320 dse saying
Memory curruption
Help me with the steps please
Follow what in my yt juat update firm wate no need flash file
Hi where i can find de link for the software
No need the link just update the firmware and done follow theninstruction tgat give to you after that finish
sir pakita mo naman kung saan mo sinaksak yung usb cable mo?
Sa latop sir
@@benzblogsVlogs 😆 yung sa kabilang dulo sir ang tinatanong ko. sa laptop yung isa eh yung kabilang dulo sir 😆
@@manuellastrollo2168 sa module doon sya naka connect
It's a 3 phase generator, boss
Do one thing measure the lone to nutral each line to know if module and your teater same reading thin if. Deferent means module is have problem
how can i get the program and the flash file
Sir no need flash file just just update firmware of your module and follow the instruction
@@benzblogsVlogs I can't find the program that you used on the video or the file you used to update the firmware, can you upload it so i can download
Thanks
@@Eng_omar_courses no need that now deepsea new firmware can fix that problem okay
@@benzblogsVlogsi don't have the new firmware or the program
That's why i asked you to upload them for me if that possible
@@Eng_omar_courses download deepsea sofeware sonyou can do this upgrade firmware
Sir nagstock up yung module sa "calling application" hindi na bumalik at hindi na maread 7420 MKII. SALAMAT
Simple lang sir ponta ka sa tools hanapin mo may makikita kang update firmware click mo yan tatlong nxt may mkikita kang brows hanapin mo yung model ng module mo tapos cleck monkong anong model tapos click ko yung latest vesion
Tapos open mo basahin monyung sinabi ng computer sundin mo lang at yun tapos babalik na sa dati
Of follow tgat vedio in yt