Amigo por que control me da un consumo de 15 Amperios. Y con la pinza amperimetrica me da 1.5Amperios. Puede ser que los CTs estén enviando datos erroneos?
when you see the hours running mode, press and hold generator stop button for more than 10 seconds the counter will reset to zero this is useful when servicing has been done
In Perkin engine 45kva, oil sensor is installed with single wire, when the wire is removed, the hours are starting to increase without starting the engine. What is the reason?
❤❤❤❤I love to listen your graceful voice bro ❤❤❤
Hi sir nice video, sir can you make a video for woodward 2301a electronic governor, thanks and take care always sir
Okay 👍
@@Technical.Education thanks sir im willing your videos regarding for generator explanation
Thanks for explaining it so well
After starting it, just in 10 seconds it gives me oil pressure sensor alarm and gen went off 🚨
How can i remove the alarm?
@@ScwarlloSchwarllziiMoreh oil pressure ok or not
How can i remove oil pressure sensor alarm?
@@ScwarlloSchwarllziiMoreh 1 .check oil pressure with pressure gauge
2. Check sensor
3. Check wiring from sensor to module
Make sure strong negative/ earth signal connect to controller port number 10... and also make sure your sensor type is VDO not other types
@@dicksonfredrick481 thank you sir,
My gen set has 3 pin oil sensor
Where do you connect the glow plug relay?
No 8 pin is configured for that
What are the module pin when the generator ask for
5 number pin for generator or charging alternator
Amigo por que control me da un consumo de 15 Amperios. Y con la pinza amperimetrica me da 1.5Amperios.
Puede ser que los CTs estén enviando datos erroneos?
Lo siento por el cambio tardío de la relación CT.
Can I be able to reset hours running manually?
Not possible download deep sea suite and you can set running hrs
when you see the hours running mode, press and hold generator stop button
for more than 10 seconds the counter will reset to zero
this is useful when servicing has been done
none of these videos show how to wire up the preheat/glow plug. Why?
Pin 8 or 9 can be configured for preheat or glow plug.it’s not in factory setting
Thanks, I’ll try that@@Technical.Education
Is the symbol below on the display ok
Which symbol?
Which sensor count hours
DSE configuration suite can change hours. You can check if it works on 4520 or not.
@Technical.Education can i increase hours manualy on display?
@adeelshaikh9987 Not possible according to my knowledge
@@Technical.Education There is another way?
@adeelshaikh9987 not in my knowledge
Is there a way to program it to 60hz nominal. And is there programming software.
Yes 👍
DSE configuration suite
How incres fuel speed
Which engine
Cheq kar ke batao ga
@lukshkumar990 okay 👍
Kesy cheq karo
@@lukshkumar990 engine model written on engine
😊
Thanks
Good
dse4521 mahindra ka video banao
Pakistan main nai milta varna bna lety
@@Technical.Education sorry sir
Hi
@@adeelshaikh9987 how are you
@Technical.Education every thing is fine can you talk in urdu?
@Technical.Education my english not good🫣
@adeelshaikh9987 I will think of that
In Perkin engine 45kva, oil sensor is installed with single wire, when the wire is removed, the hours are starting to increase without starting the engine. What is the reason?