Axial SCX10 LCG Chassis, Axles, Transmission & Electronics (Part 2)
Вставка
- Опубліковано 17 бер 2023
- I had so much fun putting together this truck, below I leave you the links where you can find the parts I used for this project
Please subscribe friends and of course all your comments, likes and/or unlikes are highly appreciated!!
Untill next time!!!
Where to find:
DKKY Metal RC Front and Rear Axle Set:
www.amazon.com/dp/B0B6188R2L/...
SSD RC Scale Fuel Cell Receiver Box Set:
www.amainhobbies.com/ssd-rc-s...
FEETECH FT846BL High Torque Servo 40KG Servo Full Aluminum Brushless Servo 180 Degree Rotation:
www.amazon.com/FEETECH-Voltag...
Traxxas TRX-4 GTS Aluminum Long Arm Shocks: www.amainhobbies.com/traxxas-...
Injora Drive shafts for Carbon Fiber LCG Chassis : www.injora.com/products/injor...
Holmes Hobbies CrawlMaster Sport 550 Brushed Electric Motor (12T): www.amainhobbies.com/holmes-h...
Hobbywing QuicRun Waterproof 1080 Brushed Crawling ESC:
www.amazon.com/HOBBYWING-QUIC...
www.amainhobbies.com/hobbywin...
Meus Racing Metal Large Steering Integrated Axle Front/Rear Axle for Axial SCX10: www.meusracing.com/collection...
Carbon Fiber LCG Chassis:
www.amazon.com/INJORA-Chassis...
www.amazon.com/dp/B0BM3NZ67C?...
www.meusracing.com/collection... - Авто та транспорт
Use silicone around the cables after u run them in the box
Nice 👍🏾
Thank you friend!
45mm turnbuckle works perfectly on the front uppers. It allows you to get full compression and lower cg. Nice choice on the shocks and yeah the 540 is big as you can go,unless you flip the skid. That will mess up the cg. I have one with all axial. Now I'm getting some trx4 shocks.
Thank you for the 45mm turnbuckle tip friend 😃👍, And thank you for watching!! Take care!!
i would love to see it on action :) keep it up
Thank you friend!
Man that thing is sweet. I got a scx10 chassis coming as well as a 2sp transmission and 1080 esc. I like the receiver box thats a great idea
Enjoy your project friend!!!! Thank you for watching! Take care and stay in touch 👍
great video bud
Thank you friend!!
Im just building the same chassis so these tips are great thanks. I have both 540 and 550 motors so I will ise the 540 as recommended. I also don't like those weird top links. Im looking for an alternative even if I have to go longer. Off to watch part 3 to see how you complate the build, thanks again
Thank you very much for you comment friend! I am glad my video was helpful!!! 😃👍
Great LCG Build ! Nice Choice of Shocks ! Gonna Be a Awesome Rig !
Thank you friend!!
I'm confused on the front link set up over the standard 4 link on say a trx4? Why are they bent like that is it better Thanks
It is not better, in the part 3 of the series you will see that I had to replaced those links and use standard ones, thank you for watching friend, please subscribe 😃👍
hola santiago, buenos dias, una pregunta donde puedo conseguir el overdrive y hunderdrive para los diferenciales de injora, muchas gracias
Hola
Te recomiendo buscar en la página oficial de injora o AliExpress
What length drive shafts did you use
Sorry for my late response friend, there are the ones you need:
www.injora.com/products/injora-lcg-carbon-fiber-chassis-kit-frame-girder-for-axial-scx10-scx10-ii-90046?variant=40430275657776
Is there a front axle that works straight from the get go without modification?
I don’t think there is one, you will have to play with the links regardless what axles you get
Thank you for watching friend
@@thestuff6102 sorry i didn’t mean axles i meant drive shaft 🙄yea ive switched to normal 4 link style links. I have tigged a shaft for now but it pops out occasionally. It seems on most shafts the cv and the female ends are quite long.
@@MrChris106gti this are the ones you need
www.injora.com/products/injora-lcg-carbon-fiber-chassis-kit-frame-girder-for-axial-scx10-scx10-ii-90046?variant=40430275657776
Looks like a knockoff of the vanquish Currie axles
Agree 😂 thank you for watching friend
Go with belt driveway smoother
Thank you for your advise friend
Best thing u can do for that rig is get rid of those crazy z bent links and replace them with straight links.. I have 2 of those injora chassis builds , they are by far my favorite for the money spent !
Thank you Eric, right now I am doing exactly that for my final episode of this series, are you using a 540 or a 550 can?
ditto.....
What length links did you replace them with?