ASG | ULTIMATE EVO CNC Performance Hop-up

The ULTIMATE EVO CNC Performance Hop-up is a welcomed upgrade to the Scorpion EVO family. In this quick assembly video we’ll show you how easy and fast it is to configurate your Hop-up to your specific EVO built.
The ULTIMATE EVO CNC Performance Hop-up unit (Ref. 19204) is designed and developed by ActionSportGames A/S to ensure perfect compatibility and performance with our EVO platform.
The dedicated EVO owners around the world have encouraged our TEAM to develop a high-performance Hop-up chamber. It is with pride ASG offer the ULTIMATE EVO CNC Performance Hop-up for the EVO AEG and HPA platform. The ULTIMATE CNC Performance Hop-up unit offers unique stability, longer range and tighter groupings without any other changes to your EVO while still maintaining compatibility toward with any type of upgraded Hop-up rubber and precision barrels you may use.
The unique engineering of this CNC Hop-up chamber allows for a wide range of settings in order for you to optimize and finetune the performance of your EVO regardless of power output and BB weight. This is the most versatile and customizable Hop-up unit to date - designed and manufactured in Denmark exclusively for the EVO by ActionSportGames.
For more information please visit actionsportgam...

[@booth773]

Incase anyone is still using this video as a reference please note that after u place the bottom washers u need to place the smaller oring provided on top of them before adding the dial. It should go "bottom washer - oring - dial - top wahser - the thing that goes on top lol"

[@HigherPower25]

What he failed to mention was that you need thread lock on the bottom silver set screw as it will back itself out over time and use and once it pops out, the whole unit comes undone and lost in the field. I've contacted ASG about it and they said it was my fault for not putting thread lock on it even though it's not in the instructions, nor in this video. It's been like pulling teeth to get replacement parts, which you would think the service would be better for one of the most expensive hop up units on the market

[@Rockerrobin]

Just got a cz scorpion the adjustment screw for the hopup was maxed out. It broke as I as I attempted to lower it. I also had some o ring jam up into one of my mags. The 75 round mags were also a nightmare even stuck playing single fire.

[@mostafafawaz1]

I’m assuming more washers underneath for rhop???

[@tobi_0585]

well i do have a problem... does someone know how to fit the cables? i can't fit my mags because of them...

[@ihard]

I have the same problem - it is very difficult to install the clip, as far as I could figure out, the problem is not with the cables. the orginal hopup is more subtle and the stores have a recess that allows them to go a little deeper. this is a real problem for me and it seems that the developers did not take this problem into account. Did you manage to get around this problem somehow?

[@tobi_0585]

@@ihard oh by me it was the wire, i just had to bend it perfekt so it was almost flush to the wall. The mags fit well now. of course it felt different, but it worked.
but as you sad, the hopup use more space. so it is real tight.
if it is the wire you should see some dmg on them (the mag was hitting them in my replica) otherwise it may be a different problem

[@ihard]

@@tobi_0585 At first I also thought that because of the wire, but it is laid well and does not interfere with me. As a result, I removed with a knife a small part of the plastic (0.1-0.2mm in total) on the magazines. I have an original magazine.

[@baba3149]

Compatible with omega bucking ?

[@yusenxie6756]

When will it be released in US?

[@lizardsqaud1177]

Dose anyone know the best washer set up for .25 bbs. Thanks 2:56

[@copperandbrass]

Have you found a setting yet? I will install mine tomorrow. If not, I´ll let your know what worked for me. But I use the Begadi FLY Bucking. That might change the setting.

[@tomas6969]

Is there a risk of lipo 11.1 breakage for original Scorpion evo ?