@@andymercado6192 in my mind to many of my viewers are having issues. Read the comments. Now if you do decide to purchase (my personal compressor is still working fingers crossed 🤞) I would get Amazon insurance.
I got one and I love it. Use it for over a year now even top of my 2 and 3 liter bottle with it. Just only just recently take it apart and only clean it because i saw fill time going up. And now it’s working great again. Lower temp and fill time to normal. This things just do the jop. Just don’t run it to hot!!! I stop wen it’s about 40 Celsius and let the fan run till it drops in temp then continue to fill. It works for me.
IPlay Airsoft and I fill my 3,000 PSI 48 cubic inch tank which is equivalent to 0.8 l I've been using mine since July and no problems so far. Fingers crossed that it stays that way. I do what the fans run for a minute and when I start the compressor I do it with the purge valve open so that you're not starting it with pressure on the head and then I closed the purge valve. And when I'm done using it I let the fans run for about 10 minutes to make sure that it has cooled down the inside of the compressor
I’ve had two in the past year both only lasted a few months. I wasn’t even filling anything big. Nothing over 400cc and they weren’t even empty. Get the yong heng instead or a dual cylinder.
I have mine for 9 months and have had no problems at all. I shoot for about two hours at a time with several different guns running at 3000 to 3500 psi. The only complaint is that it's loud and a little slow. So far the O rings are still holding up but the cotton filters do collect a lot of water and have to be dried out or changed. I guess I got a good one.
that thing crapped out on me after 5 months a literal piece of metal snapped on me bought a yong heng and that thing has been good to me so far loved the vevor till it decided to break
I have a Toauto compressor. It looks like the Vevor, just a different color. I'm just starting the airgun enjoyment. And it not disappointed me yet. I used it to fill a new 3 liter bottle. Took a long time,but never got over 100 degrees and I waited a few minutes to restart after 30 minute run time.
@@AirgunAdvisor started with a Gamo DX and Gamo Viper. Though my wife and I would like pcp's better. So I got diana stormriders two in 22 and one 177. They fit my wife great,me not so much. I'm getting ready to order two jts airacuda max a 22 and a 25.
I have yet to shoot the JTS Airguns, but have heard good things. I am in the process of reviewing a AvengerX in .22 caliber (tube version). I was really impressed with its accuracy at 50 yards.
Looks like you can get a good deal on this model. What has changed on the new replacement for this model? it looks identical except it has no fan switch button. The manufacturer says it has a new internal structure but that's all they say. I would be interested to know BEFORE I BUY (just like your video title says!)
I wouldn't mind having that answer as well. There are two nearly identical 4500 psi pcp units available and as a newbie I cannot identify the real difference and or advantage of one over the other. SG-220V-110V-12VMC vs SS-PAC03A
I'm having the same problem. It ran great for about months then the relief valve started leaking and you had to really screw it down to make it seal. Now, the motor sounds like something is knocking and it will not pressure over 2200 psi. Their support is very nice but they don't offer to help. I sent them a video, as others have stated, and it didn't help. Their support is just lip service. They do not stand behind the product. Would love to know what compressor is reliable but reasonable. Thanks!
My update: so i contacted Vevor. They asked me to send a video. Then they send me a new pump wich i installed. Now it works again. Just filled my rifle that needs 200 bar. So as stated before i think the 250 bar fill on the 580cc cilinder was too much. So now i will use it to fill my 200 bar rifles with less than 500cc tanks and see how that goes. A tip: when you dismantle the pump, reseal the bolt on stuff with locktite. Not the copper tubing but everything on the cilinder/ pump. Electronics/ inverter and motor seem good on this product, just the pump blows seals regularly. But for the money you get what you pay for. Also as stated before and i told Vevor too,...they should include all seals needed to fix the product
@@AirgunAdvisor I think so. Now it needs testing with the limits i set. When i took out the nozzle it was burned and the o ring too. So i definately abused it somehow. I think 200 bar fills with under 500cc of volume will be advisable. If it fails again and my waranty is over i will transform it into a power station. The case and inverter can be reused. Also the motor can be reused for other uses.
THIS is why I never got a PCP, and stuck to springers. Just seems like such a hassle to plink in the back yard and have to deal w/ alllllllll the extras you have buy just to shoot.
To anyone that uses these small compressors that are powered by the 300 and 350 watt 12 volt electric motor. 300 watts at 12 volts under a full load requires 29.4 amps. This is beyond what those power supplies either separate or installed that allows you to use regular 110 volt house current. DONT USE THE 110, use a 12 volt supply from a vehicle. I assume somewhere out there someone makes a converter that would supply enough amps to run fan and motor , the ones they include and/or install inside compressors like is in the video ARE NOT BIG ENOUGH to properly power the 300 watt motor. This causes them to run hotter than they do on 12 volt DC supply. Also, take the cover off of your compressor and make sure none of the screws in the linkage connecting motor to compressor are not loosening. Using only a 12 volt DC power supply will extend the life of the 12 volt electric motor. A person can get a Yong Heng for about the same cost , it’s way faster than those compressors that are in the video. You only need to rig a cooling water supply to use while it’s running and order a good high pressure compressor oil when you order the Yong Heng. Also get a 36 inch stainless steel braided fill hose. Those are less than 20 bucks on amazon.
it does not come with the seals and o rings for the piston/ cilinder. I have a failure, it does not build pressure anymore and the sound has changed. I changed all the o rings included and also the valve spring, o ring and nozzle, but still broken. There are many seals on the inside of the piston/ cilinder and they are not included. So now they need to send me some or i need to send the compressor in for repairs. i filled my pcp 20 times then it broke down. I'm gonna buy a spare scuba tank and no more compressors for me. The motor and cooling are ok, but the piston/ cilinder is not a solid build. It has many seals and they break easily. Also i would only use it to charge to 200 bar. You will notice the first uses it fills rather fast. Then it becomes slower and then some seals will break. It is build rather simple so maintenance is easy, but you need to find the parts.
@@AirgunAdvisor i already complained about the kalibrgun springbok, now this compressor :). So i will say something positive, my fx wildcat mk3 bt is awesome, very precise, accurate that gun makes shooting easy. Also the sam yang sumatra carbine is awesome. On the range everybody thinks i am shooting a firearm it is that loud :) and it shoots also very precise. So there are products i like and i have luck with, hahaha ;) , so i bought a 20 liter scuba tank today, i keep my 7 liter as backup now. Whatever happens with the compressor i have enough air and i have a pump, only the fx will be undoable but my other guns have 200 bar tanks. So very doable with a pump.
Looks good. I am new to shooting pcp and looking to upgrade form my handpump. Should I buy a compressor or a bottle? Whats difference between these two options?
Bottle - fast filling at the range but you need someplace local that can top it off for you. The hassle is always having to go get it filled and they have a service life of 15 years and mandatory hydrostatic testing every 5 years. Cheap compressor = fill your airgun whenever and wherever. Heat build up can destroy seals and bearings so they are only good for filling one airgun at a time. These are not built to fill a large tank. Some mechanical know how will be needed down the road as with all mechanical things they do require maintenance. There are some good videos out there show how to rebuild these and other similar compressors. The small portables are all similarly. Hope this helps.
@Airgun Advisor, thanks for the review. I got me one. But I need to put a male fitting on it. Cloud, you tell me if it's easy to put one and a link where I can get one plus a link to an olie and moisture filter. Thanks in advance. Keep posting airgun vids. Cheers from Holland
Mine died (vevor ) 3 weeks old and just wont pump. I tore it down to check seals all were fine and check valve and disc were ok anything else to check for ?
I have the same problem after 20 fills. Also changed all parts included, but it has not fixed it. There are many seals inside the piston/ cilinder and they are not included. So now i wait for a response from Vevor.
I contacted vevor they had a "tech" contact me and try to fix it which didn't and my 30 days was nearing . Seller kept trying to cut the total down 20% I rejected the offer over and over and had enough and just hit return and printed a label .I'd rather fight ebay . I'll never buy another off brand pump . There's to many versions and the parts take weeks to locate. I ordered a gx cs3-1 atleaste it's a known company and parts are easier to locate.
These portable compressor all have the same mechanism inside and in my opinion they are not for 4500 PSI as they claim to be.I have one that is the same as yours;only the band name is Spritech and after the third fill of 4300 PSI its been nothing but problems keeping it up to pressure.I gave up maintaining it and have a compressor thats none functional.DON'T WAST TIME AND MONEY ON THESE TYPE OF COMPRESSORS!Now looking for a compressor that is really rated 4500 plus PSI at a good price.
Update,I just purchase the GX CS4-I compressor.Now will wait until its delivered and hoping this one is up to date as to what air gunners require these days.😁
I have not. This model might be able to do it, however it isn’t built like others or have the addition cooling features. More of a airgun filler vs large tank.
If it is humid, they will do that. Hence the cotton filter. As you can see in the pinned comment, I am no longer recommending this compressor. Too many issues.
Mine was just delivered and absolutely positively I would avoid this at all cost. Did not work out of the box and there is no telephone number for customer service or technical support and now I'm trying to get my money back and I believe they are giving me a runaround. This thing has been in my hands less than 6 hours. I could only chat with someone called Islam and it was no help at all. They told me to upload pictures or videos MP4s and I tried doing that and their system would not accept them even though they were within size and their qualifications then they sent me some stupid email asking me to send an video through some stupid third-party system. They are just trying to complicate things. Really avoid avoid avoid avoid
Mine died after 8 months and the company just gives me the runaround. It's impossible to change the O rings as they recommend. They won't provide me with an address to send for warranty repairs. They are hoping you just give up trying. Do not ever buy anything from Vevor. I bought this off Amazon and even they can't help me.
Bought one, it died on the second use in less than a week of ownership. They offered me parts and then offered me 1/4 refund. I asked multiple times for a full refund and or exchange or upgrade. Nothing. Do not buy if you value reliability and your hard earned money. Still dealing with Vevor support. Would not buy from this company ever again. Very disappointing. Cheap junk.
@@sboy1955 Maybe but the customer service was interesting they kept asking to send me parts and they had a hard time wanting to give me a full refund but eventually they gave me a refund and my yong heng is still going strong!
I bought the small veaver it didn't even last long enough to pump up two guns the compressor locked and my second one is on the way I'm going to give it a try and if it works good if it doesn't I would say don't get them I may have just got a lemon 🍋
Common question for those just starting in the world of pcp airguns. Unfortunately they cannot. Your home shop compressor will only go up to around 150psi whereas specialized scuba compressor can supply pressurized air up to 4500 psi.
Here's the deal guys. I have been into these PCP guns way before they became affordable to everyone. I own a bunch of them. There's not really much other that can go wrong with these compressors than a broken O-ring or wiring problem. The vast majority of problems are caused by stupid people burning them up, Hard to believe huh? Like the idiot posted saying his compressor never gets over 100deg F. I call BS. If you're not smart enough to change a O-ring or if you don't have sense enough to not let it run for 30 min straight then this game isn't for you...
yea I agree I bought they most big money one they have and a piece of metal snapped and all their customer service wanted to do is send me new parts so I kept bugging them for a refund then they gave me one and I bought a yong heng and so far its worked great it fills my gun in 30 seconds compared to the vevor that took 5 minutes
rofl man what a BS ,,I have a vevor compressor for 2 years now ..never missed a beat .Never service because i am dumb ..and it still fill my vulcan 3 .30 like a dream ..Yeah some O ring bs but nothing major .
HEY MY GUY YOUR FILTER IS ON THE WRONG END. IF YOU HAVE IT SET UP LIKE THIS IT WILL SUCK THE FILTER INTO THE OUTLET AND CLOG IT THEN RUPTURE THE BURST DISK. 😄 USER ERROR, USER ERROR. I dont care what the instructions say. The filter end goes on the tank.
Do NOT Buy this compressor! It is no longer recommended.
Why?
@@andymercado6192 in my mind to many of my viewers are having issues. Read the comments. Now if you do decide to purchase (my personal compressor is still working fingers crossed 🤞) I would get Amazon insurance.
@@AirgunAdvisor yea definitely get insurance
What do you recomend in place of this one
Whats recomended now your opinion
Please review this same compressor after you have used it for a year.
I got one and I love it. Use it for over a year now even top of my 2 and 3 liter bottle with it. Just only just recently take it apart and only clean it because i saw fill time going up. And now it’s working great again. Lower temp and fill time to normal. This things just do the jop. Just don’t run it to hot!!! I stop wen it’s about 40 Celsius and let the fan run till it drops in temp then continue to fill. It works for me.
These people break em through user error then blame the maker. 😄 Mine works great.😄💯
IPlay Airsoft and I fill my 3,000 PSI 48 cubic inch tank which is equivalent to 0.8 l I've been using mine since July and no problems so far. Fingers crossed that it stays that way. I do what the fans run for a minute and when I start the compressor I do it with the purge valve open so that you're not starting it with pressure on the head and then I closed the purge valve. And when I'm done using it I let the fans run for about 10 minutes to make sure that it has cooled down the inside of the compressor
I’ve had two in the past year both only lasted a few months. I wasn’t even filling anything big. Nothing over 400cc and they weren’t even empty. Get the yong heng instead or a dual cylinder.
Not tech savy enough to replace a damn o-ring I see
@ it was the motor that cracked.
I have mine for 9 months and have had no problems at all. I shoot for about two hours at a time with several different guns running at 3000 to 3500 psi. The only complaint is that it's loud and a little slow. So far the O rings are still holding up but the cotton filters do collect a lot of water and have to be dried out or changed. I guess I got a good one.
that thing crapped out on me after 5 months a literal piece of metal snapped on me bought a yong heng and that thing has been good to me so far loved the vevor till it decided to break
I have a Toauto compressor. It looks like the Vevor, just a different color. I'm just starting the airgun enjoyment. And it not disappointed me yet. I used it to fill a new 3 liter bottle. Took a long time,but never got over 100 degrees and I waited a few minutes to restart after 30 minute run time.
Right on! Welcome to the fun and thank you for sharing your compressor experience. What airgun did you get started with?
@@AirgunAdvisor started with a Gamo DX and Gamo Viper. Though my wife and I would like pcp's better. So I got diana stormriders two in 22 and one 177. They fit my wife great,me not so much. I'm getting ready to order two jts airacuda max a 22 and a 25.
I have yet to shoot the JTS Airguns, but have heard good things. I am in the process of reviewing a AvengerX in .22 caliber (tube version). I was really impressed with its accuracy at 50 yards.
Looks like you can get a good deal on this model. What has changed on the new replacement for this model? it looks identical except it has no fan switch button. The manufacturer says it has a new internal structure but that's all they say. I would be interested to know BEFORE I BUY (just like your video title says!)
I wouldn't mind having that answer as well. There are two nearly identical 4500 psi pcp units available and as a newbie I cannot identify the real difference and or advantage of one over the other.
SG-220V-110V-12VMC vs SS-PAC03A
me too
I'm having the same problem. It ran great for about months then the relief valve started leaking and you had to really screw it down to make it seal. Now, the motor sounds like something is knocking and it will not pressure over 2200 psi. Their support is very nice but they don't offer to help. I sent them a video, as others have stated, and it didn't help. Their support is just lip service. They do not stand behind the product. Would love to know what compressor is reliable but reasonable. Thanks!
My update: so i contacted Vevor. They asked me to send a video. Then they send me a new pump wich i installed. Now it works again. Just filled my rifle that needs 200 bar. So as stated before i think the 250 bar fill on the 580cc cilinder was too much. So now i will use it to fill my 200 bar rifles with less than 500cc tanks and see how that goes. A tip: when you dismantle the pump, reseal the bolt on stuff with locktite. Not the copper tubing but everything on the cilinder/ pump. Electronics/ inverter and motor seem good on this product, just the pump blows seals regularly. But for the money you get what you pay for. Also as stated before and i told Vevor too,...they should include all seals needed to fix the product
Glade to hear this. Buy with caution perhaps?
@@AirgunAdvisor I think so. Now it needs testing with the limits i set. When i took out the nozzle it was burned and the o ring too. So i definately abused it somehow. I think 200 bar fills with under 500cc of volume will be advisable. If it fails again and my waranty is over i will transform it into a power station. The case and inverter can be reused. Also the motor can be reused for other uses.
@@davypeleman3672 I have heard running it for 15 minutes at a time then letting it cool/rest helps, even if it is not over max temp.
@@Riyame hi, usually i don't run it for 15 minutes? rifle is filled quicker
@@davypeleman3672 Do you ever stop it then restart it with pressure in the lines?
THIS is why I never got a PCP, and stuck to springers. Just seems like such a hassle to plink in the back yard and have to deal w/ alllllllll the extras you have buy just to shoot.
The F150 Powerboost is almost purpose built for these tasks. Good little compressor.
Very few report long term use because it doesn't last very long.
I have two different vevor’s they are both very good, mine both shut off at 25 minutes exactly
Thank you for sharing this. Always easy to comment when you have a bad experience, less so for positive ones. I could do without that 25 min shut off.
To anyone that uses these small compressors that are powered by the 300 and 350 watt 12 volt electric motor. 300 watts at 12 volts under a full load requires 29.4 amps. This is beyond what those power supplies either separate or installed that allows you to use regular 110 volt house current. DONT USE THE 110, use a 12 volt supply from a vehicle. I assume somewhere out there someone makes a converter that would supply enough amps to run fan and motor , the ones they include and/or install inside compressors like is in the video ARE NOT BIG ENOUGH to properly power the 300 watt motor. This causes them to run hotter than they do on 12 volt DC supply. Also, take the cover off of your compressor and make sure none of the screws in the linkage connecting motor to compressor are not loosening. Using only a 12 volt DC power supply will extend the life of the 12 volt electric motor. A person can get a Yong Heng for about the same cost , it’s way faster than those compressors that are in the video. You only need to rig a cooling water supply to use while it’s running and order a good high pressure compressor oil when you order the Yong Heng. Also get a 36 inch stainless steel braided fill hose. Those are less than 20 bucks on amazon.
Bought one of these today. I hope it's a good one.
You'll regret it
it does not come with the seals and o rings for the piston/ cilinder. I have a failure, it does not build pressure anymore and the sound has changed. I changed all the o rings included and also the valve spring, o ring and nozzle, but still broken. There are many seals on the inside of the piston/ cilinder and they are not included. So now they need to send me some or i need to send the compressor in for repairs. i filled my pcp 20 times then it broke down. I'm gonna buy a spare scuba tank and no more compressors for me. The motor and cooling are ok, but the piston/ cilinder is not a solid build. It has many seals and they break easily. Also i would only use it to charge to 200 bar. You will notice the first uses it fills rather fast. Then it becomes slower and then some seals will break. It is build rather simple so maintenance is easy, but you need to find the parts.
Great information here. These seem to be a little hit or miss? Keep us posted with how your experience goes.
@@AirgunAdvisor i already complained about the kalibrgun springbok, now this compressor :). So i will say something positive, my fx wildcat mk3 bt is awesome, very precise, accurate that gun makes shooting easy. Also the sam yang sumatra carbine is awesome. On the range everybody thinks i am shooting a firearm it is that loud :) and it shoots also very precise. So there are products i like and i have luck with, hahaha ;) , so i bought a 20 liter scuba tank today, i keep my 7 liter as backup now. Whatever happens with the compressor i have enough air and i have a pump, only the fx will be undoable but my other guns have 200 bar tanks. So very doable with a pump.
You get what you pay for Umerex 4500 psi.👍
Looks good. I am new to shooting pcp and looking to upgrade form my handpump. Should I buy a compressor or a bottle? Whats difference between these two options?
Bottle - fast filling at the range but you need someplace local that can top it off for you. The hassle is always having to go get it filled and they have a service life of 15 years and mandatory hydrostatic testing every 5 years.
Cheap compressor = fill your airgun whenever and wherever. Heat build up can destroy seals and bearings so they are only good for filling one airgun at a time. These are not built to fill a large tank. Some mechanical know how will be needed down the road as with all mechanical things they do require maintenance. There are some good videos out there show how to rebuild these and other similar compressors. The small portables are all similarly.
Hope this helps.
Get a young heng or Vevor Knock off of it. Vevor $200 free shipping. I have two!!
These small compressors are life savers. They are definitely better than the old hand pump. Great review.
Totally agree! These are helping so many get into the sport. Where as before, the cost was prohibitive for many.
@Airgun Advisor, thanks for the review. I got me one. But I need to put a male fitting on it. Cloud, you tell me if it's easy to put one and a link where I can get one plus a link to an olie and moisture filter. Thanks in advance. Keep posting airgun vids. Cheers from Holland
Mine died (vevor ) 3 weeks old and just wont pump. I tore it down to check seals all were fine and check valve and disc were ok anything else to check for ?
Dang! Thanks for the update. Were you able to exchange it?
I have the same problem after 20 fills. Also changed all parts included, but it has not fixed it. There are many seals inside the piston/ cilinder and they are not included. So now i wait for a response from Vevor.
I contacted vevor they had a "tech" contact me and try to fix it which didn't and my 30 days was nearing . Seller kept trying to cut the total down 20% I rejected the offer over and over and had enough and just hit return and printed a label .I'd rather fight ebay . I'll never buy another off brand pump . There's to many versions and the parts take weeks to locate. I ordered a gx cs3-1 atleaste it's a known company and parts are easier to locate.
@@gregg2742 thanks for the update! Good to have community input like this.
Yea check for a new compressor
These portable compressor all have the same mechanism inside and in my opinion they are not for 4500 PSI as they claim to be.I have one that is the same as yours;only the band name is Spritech and after the third fill of 4300 PSI its been nothing but problems keeping it up to pressure.I gave up maintaining it and have a compressor thats none functional.DON'T WAST TIME AND MONEY ON THESE TYPE OF COMPRESSORS!Now looking for a compressor that is really rated 4500 plus PSI at a good price.
Update,I just purchase the GX CS4-I compressor.Now will wait until its delivered and hoping this one is up to date as to what air gunners require these days.😁
Just wrapping up a little review on one now. Hope to have it up in 24-48’hours. Keep us posted on your thoughts too.
@@MrJr298 $700??????????????????????????????????????? That's why I've never got a PCP. sheeeesh
Ever try filling a Scott sbca tank with it ?
I have not. This model might be able to do it, however it isn’t built like others or have the addition cooling features. More of a airgun filler vs large tank.
@@AirgunAdvisor thanks
My vevor pcp air compressor starts shooting effing water out of the fill hose after less than 5 min of filling
If it is humid, they will do that. Hence the cotton filter. As you can see in the pinned comment, I am no longer recommending this compressor. Too many issues.
@@AirgunAdvisor I live in Idaho. Tried it outside in the shade in the summer. A desert. Just sux
Mine was just delivered and absolutely positively I would avoid this at all cost. Did not work out of the box and there is no telephone number for customer service or technical support and now I'm trying to get my money back and I believe they are giving me a runaround. This thing has been in my hands less than 6 hours. I could only chat with someone called Islam and it was no help at all. They told me to upload pictures or videos MP4s and I tried doing that and their system would not accept them even though they were within size and their qualifications then they sent me some stupid email asking me to send an video through some stupid third-party system. They are just trying to complicate things. Really avoid avoid avoid avoid
@@natureschild53 That’s awful
Same experience here
Mine died after 8 months and the company just gives me the runaround. It's impossible to change the O rings as they recommend. They won't provide me with an address to send for warranty repairs. They are hoping you just give up trying. Do not ever buy anything from Vevor. I bought this off Amazon and even they can't help me.
Bought one, it died on the second use in less than a week of ownership. They offered me parts and then offered me 1/4 refund. I asked multiple times for a full refund and or exchange or upgrade. Nothing. Do not buy if you value reliability and your hard earned money. Still dealing with Vevor support. Would not buy from this company ever again. Very disappointing. Cheap junk.
the vevor compressor took about 5 minutes to fill my gun from 1900 psi to 3000 my yong heng takes 30 seconds no joke
Both probably built side by side in the same factory. You just got a bad Vevor.
@@sboy1955 Maybe but the customer service was interesting they kept asking to send me parts and they had a hard time wanting to give me a full refund but eventually they gave me a refund and my yong heng is still going strong!
I bought the small veaver it didn't even last long enough to pump up two guns the compressor locked and my second one is on the way I'm going to give it a try and if it works good if it doesn't I would say don't get them I may have just got a lemon 🍋
Great feedback and keep us posted. Happy to hear they are standing behind their product.
Good Intel. How did the second one hold up? Thanks
@@Phunkitup it lasted for about six uses and now I am returning it also!!!
Can a large Craftsman compressor fill a pcp tank to 4500 psi/
Common question for those just starting in the world of pcp airguns. Unfortunately they cannot. Your home shop compressor will only go up to around 150psi whereas specialized scuba compressor can supply pressurized air up to 4500 psi.
Dont waste urmoney its junk got one it lated about 5hrs total run time over 5 days and burned he wires up
@@olonnie41 agreed
Here's the deal guys. I have been into these PCP guns way before they became affordable to everyone. I own a bunch of them. There's not really much other that can go wrong with these compressors than a broken O-ring or wiring problem. The vast majority of problems are caused by stupid people burning them up, Hard to believe huh? Like the idiot posted saying his compressor never gets over 100deg F. I call BS. If you're not smart enough to change a O-ring or if you don't have sense enough to not let it run for 30 min straight then this game isn't for you...
6 hours to fill a 9L PCP tank? Better off with the basic 4500 Acecare.
Vevor compressor are garbage and there service stinks stay away
yea I agree I bought they most big money one they have and a piece of metal snapped and all their customer service wanted to do is send me new parts so I kept bugging them for a refund then they gave me one and I bought a yong heng and so far its worked great it fills my gun in 30 seconds compared to the vevor that took 5 minutes
rofl man what a BS ,,I have a vevor compressor for 2 years now ..never missed a beat .Never service because i am dumb ..and it still fill my vulcan 3 .30 like a dream ..Yeah some O ring bs but nothing major .
HEY MY GUY YOUR FILTER IS ON THE WRONG END. IF YOU HAVE IT SET UP LIKE THIS IT WILL SUCK THE FILTER INTO THE OUTLET AND CLOG IT THEN RUPTURE THE BURST DISK. 😄 USER ERROR, USER ERROR.
I dont care what the instructions say. The filter end goes on the tank.
🤔